DEPT OF INDUSTRIAL & MFG SYS ENGG
Researcher : CHEN J |
List of Research Outputs |
CHEN J., Fang Y. and Lau H.Y.K., A novel design of robotic air bridge training system, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 67-72. |
CHEN J., SUN P. and Lau H.Y.K., Autonomous robotic manipulation task with programing by demonstration and robot-assisted large-scale direct SLAM, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J., Wu W., Ren H.L. and Lau H.Y.K., Data-driven methods towards learning the highly non-linear inverse kinematics of tendon-driven surgical manipulators, International Journal of Medical Robotics and Computer Assisted Surgery. 2016, 2016: 1 - 11. |
CHEN J. and Lau H.Y.K., Inverse kinematics learning for redundant robot manipulators with blending of support vector regression machines, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 267-272. |
CHEN J. and Lau H.Y.K., Inverse kinematics reinforcement for a wire-driven serpentine surgical manipulator based on policy gradient methods, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J. and Lau H.Y.K., Learning adaptive reaching skills with nonlinear dynamical systems directly from human demonstrations, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 232-237. |
CHEN J. and Lau H.Y.K., Learning clinical skills for a wire-driven multi-bending minimally invasive surgical manipulator from human demonstration, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J., Qu T. and Lau H.Y.K., Motion planning for a stiffness controllable wire-driven continuum surgical manipulator with learning from demonstration, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J. and Lau H.Y.K., Transferring autonomous reaching and targeting behaviors for cable-driven robots in minimally invasive surgery, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 79-84. |
Chen J., Wang M., Kong X., Huang G.Q., Dai Q. and Shi G., Manufacturing synchronization in a hybrid flowshop with dynamic order arrivals, Journal of Intelligent Manufacturing. 2017. |
Qu T., CHEN J., SHEN S., Xiao Z., Yue Z. and Lau H.Y.K., Motion control of a bio-inspired wire-driven multi-backbone continuum minimally invasive surgical manipulator, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1989-1995. |
SUN P., CHEN J. and Lau H.Y.K., Programming human-like point-to-point approaching movement by demonstrations with Large-Scale Direct Monocular SLAM, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1498-1503. |
Wang J.Q., CHEN J., Zhang Y.Q. and Huang G.Q., Schedule-based execution bottleneck identification in a job shop., Computers & Industrial Engineering. 2016. |
Researcher : CHEN J |
List of Research Outputs |
CHEN J., Fang Y. and Lau H.Y.K., A novel design of robotic air bridge training system, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 67-72. |
CHEN J., SUN P. and Lau H.Y.K., Autonomous robotic manipulation task with programing by demonstration and robot-assisted large-scale direct SLAM, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J., Wu W., Ren H.L. and Lau H.Y.K., Data-driven methods towards learning the highly non-linear inverse kinematics of tendon-driven surgical manipulators, International Journal of Medical Robotics and Computer Assisted Surgery. 2016, 2016: 1 - 11. |
CHEN J. and Lau H.Y.K., Inverse kinematics learning for redundant robot manipulators with blending of support vector regression machines, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 267-272. |
CHEN J. and Lau H.Y.K., Inverse kinematics reinforcement for a wire-driven serpentine surgical manipulator based on policy gradient methods, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J. and Lau H.Y.K., Learning adaptive reaching skills with nonlinear dynamical systems directly from human demonstrations, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 232-237. |
CHEN J. and Lau H.Y.K., Learning clinical skills for a wire-driven multi-bending minimally invasive surgical manipulator from human demonstration, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J., Qu T. and Lau H.Y.K., Motion planning for a stiffness controllable wire-driven continuum surgical manipulator with learning from demonstration, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J. and Lau H.Y.K., Transferring autonomous reaching and targeting behaviors for cable-driven robots in minimally invasive surgery, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 79-84. |
Chen J., Wang M., Kong X., Huang G.Q., Dai Q. and Shi G., Manufacturing synchronization in a hybrid flowshop with dynamic order arrivals, Journal of Intelligent Manufacturing. 2017. |
Qu T., CHEN J., SHEN S., Xiao Z., Yue Z. and Lau H.Y.K., Motion control of a bio-inspired wire-driven multi-backbone continuum minimally invasive surgical manipulator, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1989-1995. |
SUN P., CHEN J. and Lau H.Y.K., Programming human-like point-to-point approaching movement by demonstrations with Large-Scale Direct Monocular SLAM, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1498-1503. |
Wang J.Q., CHEN J., Zhang Y.Q. and Huang G.Q., Schedule-based execution bottleneck identification in a job shop., Computers & Industrial Engineering. 2016. |
Researcher : Chan FTS |
Project Title: | Development of an Intelligent Warehouse Management Information System for the Improvement of Palletization and Storage Efficiency |
Investigator(s): | Chan FTS |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Freight Forwarder Computer Advocate Ltd. |
Start Date: | 09/2004 |
Project Title: | Feasibility study of developing a decision support system for a plant with resource constraints under uncertain environment |
Investigator(s): | Chan FTS |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | ASM Assembly Automation Ltd. - General Award |
Start Date: | 10/2004 |
Project Title: | Design and Development of a Distributed Information System for an Electroplating Company |
Investigator(s): | Chan FTS |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Confi Metal Finishing Company Limited - General Award |
Start Date: | 01/2005 |
Researcher : Chan LKY |
List of Research Outputs |
Lee M.Y.N., Lau H.Y.K., Wong H.K., Tam W.L.W. and Chan L.K.Y., Dendritic Cells for Behaviour Detection in Immersive Virtual Reality Training, In: Max Bramer, Miltos Petridis, Research and Development in Intelligent Systems XXXIII. Cham, Springer International Publishing, 2016, 371-376. |
NG K.T., Chan L.K.Y. and Lau H.Y.K., Corrective feedback for depth perception in CAVE-like systems, IEEE International Conference on Virtual Reality, Los Angeles. 2017, 293 – 294. |
NG K.T., Chan L.K.Y. and Lau H.Y.K., Depth Perception in Virtual Environment: The Effects of Immersive System and Freedom of Movement, 8th International Conference of Human Computer Interaction (HCI2016/VAMR2016), Toronto, Canada. 2016, 17 - 22. |
NG K.T., Chan L.K.Y. and Lau H.Y.K., Depth perception in virtual environment: the effects of immersive sytem and freedom of movement, In: Lackey S and Shumaker R, Virtual, Augmented and Mixed Reality. 2016, 173 - 183. |
Wong E.Y.C., Mo D., Ng C.T.Y., Chan J.K.Y., Chan L.K.Y. and Lau H.Y.K., Development of immersive virtual reality system for planning of cargo loading operations, 19th International Conference on Virtual and Augmented Reality (ICVAR 2017). 2017, 1. |
Wong E.Y.C., Mo D.Y.M., Ng C.T.Y., Chan J.K.Y., Chan L.K.Y. and Lau H.Y.K., Development of immersive virtual reality system for planning of cargo loading operations, International Journal of Computer and Information Engineering. 2017, 4(1): 1. |
Researcher : Chen J |
List of Research Outputs |
CHEN J., Fang Y. and Lau H.Y.K., A novel design of robotic air bridge training system, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 67-72. |
CHEN J., SUN P. and Lau H.Y.K., Autonomous robotic manipulation task with programing by demonstration and robot-assisted large-scale direct SLAM, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J., Wu W., Ren H.L. and Lau H.Y.K., Data-driven methods towards learning the highly non-linear inverse kinematics of tendon-driven surgical manipulators, International Journal of Medical Robotics and Computer Assisted Surgery. 2016, 2016: 1 - 11. |
CHEN J. and Lau H.Y.K., Inverse kinematics learning for redundant robot manipulators with blending of support vector regression machines, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 267-272. |
CHEN J. and Lau H.Y.K., Inverse kinematics reinforcement for a wire-driven serpentine surgical manipulator based on policy gradient methods, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J. and Lau H.Y.K., Learning adaptive reaching skills with nonlinear dynamical systems directly from human demonstrations, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 232-237. |
CHEN J. and Lau H.Y.K., Learning clinical skills for a wire-driven multi-bending minimally invasive surgical manipulator from human demonstration, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J., Qu T. and Lau H.Y.K., Motion planning for a stiffness controllable wire-driven continuum surgical manipulator with learning from demonstration, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J. and Lau H.Y.K., Transferring autonomous reaching and targeting behaviors for cable-driven robots in minimally invasive surgery, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 79-84. |
Chen J., Wang M., Kong X., Huang G.Q., Dai Q. and Shi G., Manufacturing synchronization in a hybrid flowshop with dynamic order arrivals, Journal of Intelligent Manufacturing. 2017. |
Qu T., CHEN J., SHEN S., Xiao Z., Yue Z. and Lau H.Y.K., Motion control of a bio-inspired wire-driven multi-backbone continuum minimally invasive surgical manipulator, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1989-1995. |
SUN P., CHEN J. and Lau H.Y.K., Programming human-like point-to-point approaching movement by demonstrations with Large-Scale Direct Monocular SLAM, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1498-1503. |
Wang J.Q., CHEN J., Zhang Y.Q. and Huang G.Q., Schedule-based execution bottleneck identification in a job shop., Computers & Industrial Engineering. 2016. |
Researcher : Cheng M |
List of Research Outputs |
Cheng M., Xu S. and Huang G.Q., Truthful multi-unit multi-attribute double auctions for perishable supply chain trading, Transportation Research Part E: Logistics and Transportation Review. 2016, 93: 21-37. |
Xu S., Cheng M., Kong X., Yang H. and Huang G.Q., Private parking slot sharing, Transportation Research Part B: Methodological. 2016, 93: 596-617. |
Xu S., Huang G.Q. and Cheng M., Truthful, Budget-Balanced Bundle Double Auctions for Carrier Collaboration, Transportation Science. 2016. |
Researcher : Cheung HH |
List of Research Outputs |
Cheung H.H. and Choi S.H., Digital Fabrication Technologies for Rapid Product Development, HKIE MI Division Event - DIY 3D Printing Workshop. 2016. |
Cheung H.H., Member of Editorial Board, In: Wai Hung Ip, International Journal of Engineering Business Management. 2017. |
Researcher : Choi SH |
Project Title: | Bulk identification of RFID-tagged product items for supply chain management |
Investigator(s): | Choi SH |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 06/2015 |
Completion Date: | 06/2017 |
Project Title: | A smart system for supply chain and retail business management |
Investigator(s): | Choi SH |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Seed Fund for Basic Research |
Start Date: | 06/2017 |
List of Research Outputs |
Cheung H.H. and Choi S.H., Digital Fabrication Technologies for Rapid Product Development, HKIE MI Division Event - DIY 3D Printing Workshop. 2016. |
Researcher : Chu LK |
Project Title: | A portfolio approach to procurement risk mitigation using exchange-traded commodities |
Investigator(s): | Chu LK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Incentive Award for RGC GRF Fundable But Not Funded Projects |
Start Date: | 07/2011 |
List of Research Outputs |
Li Q., Wang J., Ni J., Chu L.K. and Li C.D., The optimal time to make a risky investment under a permanent exit option, Journal of Intelligent Manufacturing. 2017. |
Ni J., Chu L.K. and Li Q., Capacity Decisions with Debt Financing: The Effects of Agency problem, European Journal of Operational Research. 2017. |
Shu L., Wu F. and Chu L.K., Risk-averse procurement strategy under large-scale promotion online considering strategic customer, Computers & Industrial Engineering. 2017. |
Researcher : Fang J |
List of Research Outputs |
Xu G., Huang G.Q., Fang J. and Chen J., Cloud-based smart asset management for urban flood control, Enterprise Information Systems. 2017, 11: 719-737. |
Zhao Z., Fang J., Huang G.Q. and Zhang M., Location Management of Cloud Forklifts in Finished Product Warehouse, International Journal of Intelligent Systems. 2017, 32: 342-370. |
Zhong R.Y., Peng Y., Xue F., Fang J., Zou W., Luo H., Ng T.S.T., Lu W., Shen Q.P. and Huang G.Q., Prefabricated construction enabled by the Internet-of-Things, Automation in Construction. 2017, 76: 59-70. |
Researcher : Huang GQ |
Project Title: | RFID-enabled manufacturing |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Pacific Top Industrial Ltd. - General Award |
Start Date: | 08/2006 |
Project Title: | Real-time manufacturing |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Meyer Aluminium Ltd. - General Award |
Start Date: | 08/2006 |
Project Title: | Web-based supply chain mangement systems for platform products |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Matching Fund for NSFC Young Researcher Award |
Start Date: | 05/2007 |
Project Title: | Gateway system for PRD manufactueres to adopt networked logistics customs cleanance platforms |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme |
Start Date: | 08/2007 |
Project Title: | Gateway system for PRD manufacturers to adopt networked logistics customs clearance platforms |
Investigator(s): | Huang GQ, Xu J |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme |
Start Date: | 08/2007 |
Project Title: | Development of a real-time RFID-enabled supply chain management “demonstrator” |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Run Run Shaw Research and Teaching Endowment Fund - Teaching Grants |
Start Date: | 09/2007 |
Project Title: | RFID-Enabled Real-Time Manufacturing Shop-floor Information Infrastructure for PRD Processing Trade Enterprises |
Investigator(s): | Huang GQ, Chan PLY, Huang JZ, Xu J |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Guangdong-Hong Kong Technology Cooperation Funding Scheme (LSCM) |
Start Date: | 07/2008 |
Project Title: | RFID-Enabled Real-Time Manufacturing Shop-floor Information Infrastructure for PRD Processing Trade Enterprises |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme (LSCM) |
Start Date: | 07/2009 |
Project Title: | RFID-Enabled Real-Time Manufacturing Shop-floor Information Infrastructure for PRD Processing Trade Enterprises |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme (LSCM) |
Start Date: | 07/2009 |
Project Title: | RFID-enabled Gateway Product Service System for Collaborative Manufacturing Alliance |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Incentive Award for RGC GRF Fundable But Not Funded Projects |
Start Date: | 07/2011 |
Project Title: | Service-oriented system for real-time optimization and execution of RFID-enabled smart contrainer loading |
Investigator(s): | Huang GQ, Qu T |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Platform Research Projects - General Award |
Start Date: | 03/2012 |
Project Title: | Development of RFID-enabled Real-Time Collaborative Manufacturing Platform using Product Service System (PSS) and Cloud Computing |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 11/2012 |
Project Title: | Periodic Sealed Double Auctions for Dynamic Transportation Service Procurement |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2014 |
Project Title: | RFID-Enabled Building Information Modeling (BIM) Platform for Prefabrication Housing Production in Hong Kong |
Investigator(s): | Huang GQ, Zhong R, Fang J, Luo H, Choi SH, Peng Y |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Platform Research Projects - General Award |
Start Date: | 03/2014 |
Project Title: | Delivering 21st Century Healthcare in Hong Kong - Building a Quality-and-Efficiency Driven System |
Investigator(s): | Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Theme-based Research Scheme |
Start Date: | 11/2014 |
Project Title: | Efficient multi-attribute multi-unit auctions for e-commerce logistics |
Investigator(s): | Huang GQ, Xu S |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 12/2016 |
List of Research Outputs |
CHEN K., Lu W., Wang H.D., NIU Y. and Huang G.Q., Naming Objects in BIM: A Convention and a Semiautomatic Approach, Journal of Construction Engineering and Management. 2017, 06017001. |
Chen J., Wang M., Kong X., Huang G.Q., Dai Q. and Shi G., Manufacturing synchronization in a hybrid flowshop with dynamic order arrivals, Journal of Intelligent Manufacturing. 2017. |
Cheng M., Xu S. and Huang G.Q., Truthful multi-unit multi-attribute double auctions for perishable supply chain trading, Transportation Research Part E: Logistics and Transportation Review. 2016, 93: 21-37. |
Fund A.Y.S., Huang G.Q., Ng T.S.T., Lu W. and Shen G.Q.P., BuildingSMART Hong Kong International Award 2016 (Title of Entry: Towards a new era in logistics and supply chain management of precast element production through the integrated use of BIM and RFID), BuildingSMART. 2016. |
Huang G.Q., Lan S. and Yang C., Data analysis for metropolitan economic and logistics development, Advanced Engineering Informatics. 2017, 32: 66-76. |
Lan S., Yang C. and Huang G.Q., Data analysis for metropolitan economic and logistics development, Advanced Engineering Informatics. 2017, 32: 66-76. |
Wang J.Q., CHEN J., Zhang Y.Q. and Huang G.Q., Schedule-based execution bottleneck identification in a job shop., Computers & Industrial Engineering. 2016. |
Xu G., Huang G.Q., Fang J. and Chen J., Cloud-based smart asset management for urban flood control, Enterprise Information Systems. 2017, 11: 719-737. |
Xu S., Cheng M., Kong X., Yang H. and Huang G.Q., Private parking slot sharing, Transportation Research Part B: Methodological. 2016, 93: 596-617. |
Xu S., Huang G.Q. and Cheng M., Truthful, Budget-Balanced Bundle Double Auctions for Carrier Collaboration, Transportation Science. 2016. |
Xu S.X. and Huang G.Q., Efficient Multi-Attribute Multi-Unit Auctions for B2B E-Commerce Logistics, Production and Operations Management. 2017, 26: 292-304. |
YU Y., Wang X., Zhong R. and Huang G.Q., E-commerce Logistics in Supply Chain Management: Practice Perspective, Procedia CIRP. 2016, 52: 179-185. |
Yang C., Lan S., Shen W., Huang G.Q., Wang X. and Lin T., Towards product customization and personalization in IoT-enabled cloud manufacturing, Cluster Computing. 2017, 20: 1717-1730. |
Zhang M., Huang G.Q., Xu S. and Zhao Z., Optimization based transportation service trading in B2B e-commerce logistics, Journal of Intelligent Manufacturing. 2016. |
Zhao Z., Fang J., Huang G.Q. and Zhang M., Location Management of Cloud Forklifts in Finished Product Warehouse, International Journal of Intelligent Systems. 2017, 32: 342-370. |
Zhong R.Y., Xu C., Chen C. and Huang G.Q., Big Data Analytics for Physical Internet-based intelligent manufacturing shop floors, International Journal of Production Research. 2017, 55: 2610-2621. |
Zhong R.Y., Peng Y., Xue F., Fang J., Zou W., Luo H., Ng T.S.T., Lu W., Shen Q.P. and Huang G.Q., Prefabricated construction enabled by the Internet-of-Things, Automation in Construction. 2017, 76: 59-70. |
Researcher : Humphreys PK |
Project Title: | 16th International Conference Computer Aided |
Investigator(s): | Humphreys PK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | URC/CRCG - Conference Support for Teaching Staff |
Start Date: | 08/2000 |
Researcher : Kong X |
List of Research Outputs |
Chen J., Wang M., Kong X., Huang G.Q., Dai Q. and Shi G., Manufacturing synchronization in a hybrid flowshop with dynamic order arrivals, Journal of Intelligent Manufacturing. 2017. |
Xu S., Cheng M., Kong X., Yang H. and Huang G.Q., Private parking slot sharing, Transportation Research Part B: Methodological. 2016, 93: 596-617. |
Researcher : Kuo YH |
Researcher : LAN S |
List of Research Outputs |
Huang G.Q., Lan S. and Yang C., Data analysis for metropolitan economic and logistics development, Advanced Engineering Informatics. 2017, 32: 66-76. |
LAN S. and Zhong R., An Evaluation Model for Financial Reporting Supply Chain Using DEMATEL-ANP, Procedia CIRP. 2016, 56: 516-519. |
Lan S., Yang C. and Huang G.Q., Data analysis for metropolitan economic and logistics development, Advanced Engineering Informatics. 2017, 32: 66-76. |
Yang C., Lan S., Shen W., Huang G.Q., Wang X. and Lin T., Towards product customization and personalization in IoT-enabled cloud manufacturing, Cluster Computing. 2017, 20: 1717-1730. |
Researcher : Lan S |
List of Research Outputs |
Huang G.Q., Lan S. and Yang C., Data analysis for metropolitan economic and logistics development, Advanced Engineering Informatics. 2017, 32: 66-76. |
LAN S. and Zhong R., An Evaluation Model for Financial Reporting Supply Chain Using DEMATEL-ANP, Procedia CIRP. 2016, 56: 516-519. |
Lan S., Yang C. and Huang G.Q., Data analysis for metropolitan economic and logistics development, Advanced Engineering Informatics. 2017, 32: 66-76. |
Yang C., Lan S., Shen W., Huang G.Q., Wang X. and Lin T., Towards product customization and personalization in IoT-enabled cloud manufacturing, Cluster Computing. 2017, 20: 1717-1730. |
Researcher : Lau HYK |
Project Title: | Simulation system for the new Central Asia Hub |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | DHL Aviation (HK) Ltd. |
Start Date: | 06/2004 |
Project Title: | HIT Terminal traffic simulation and GMTS user interface revamp |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | HongKong International Terminals, HIT |
Start Date: | 07/2005 |
Project Title: | Asia Airfreight Terminal 1 and 2 Visualization System |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Asia Airfreight Terminals Company Ltd. |
Start Date: | 07/2005 |
Project Title: | VR presentation for CAH expansion |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | DHL Aviation (HK) Ltd. |
Start Date: | 10/2005 |
Project Title: | DHL Central Asia SuperHub Virtual Reality Model |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | DHL Aviation (HK) Ltd. |
Start Date: | 04/2006 |
Project Title: | Procurement and creation of simulation models for Hactl |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Hong Kong Air Cargo Terminal Ltd. |
Start Date: | 05/2006 |
Project Title: | Simulation of DHL Central Asia SuperHub for man power planning |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | DHL Aviation (HK) Ltd. |
Start Date: | 07/2006 |
Project Title: | A Web 2.0-enabled e-learning system for collaborative learning and community building in teacher education |
Investigator(s): | Lau HYK, Lai AWY |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Teaching Development Grants |
Start Date: | 01/2008 |
Project Title: | An immunity-based framework for sustainability homeostasis in cooperating multi-robot systems |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Incentive Award for RGC GRF Fundable But Not Funded Projects |
Start Date: | 07/2011 |
Project Title: | A biological-inspired framework for sustainability homeostasis in cooperative multi-robotic systems |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Seed Fund for Basic Research |
Start Date: | 06/2012 |
Project Title: | A Virtual Reality System for Strategic Operation Training |
Investigator(s): | Lau HYK, Chan LKY |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Platform Research Projects - General Award |
Start Date: | 03/2015 |
Project Title: | Artificial immune system-based integrated air service recovery framework |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Seed Fund for Basic Research |
Start Date: | 04/2015 |
Completion Date: | 03/2017 |
Project Title: | 2015 IEEE International Conference on Robotics and Biomimetics; A Reinforcement Motion Planning Strategy for Redundant Robot Arms Based on Hierarchical Clustering and K-Nearest-Neighbors |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | URC/CRCG - Conference Support for Teaching Staff |
Start Date: | 12/2015 |
Completion Date: | 12/2016 |
Project Title: | The development of educational and research center with automatic virtual reality platform for 3D interactive learning and big data analytics |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Education Bureau - General Award |
Start Date: | 01/2016 |
Project Title: | Trial: A Virtual Reality System for Strategic Operation Training |
Investigator(s): | Lau HYK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Public Sector Trial Scheme |
Start Date: | 03/2017 |
List of Research Outputs |
CHEN J., Fang Y. and Lau H.Y.K., A novel design of robotic air bridge training system, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 67-72. |
CHEN J., SUN P. and Lau H.Y.K., Autonomous robotic manipulation task with programing by demonstration and robot-assisted large-scale direct SLAM, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J., Wu W., Ren H.L. and Lau H.Y.K., Data-driven methods towards learning the highly non-linear inverse kinematics of tendon-driven surgical manipulators, International Journal of Medical Robotics and Computer Assisted Surgery. 2016, 2016: 1 - 11. |
CHEN J. and Lau H.Y.K., Inverse kinematics learning for redundant robot manipulators with blending of support vector regression machines, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 267-272. |
CHEN J. and Lau H.Y.K., Inverse kinematics reinforcement for a wire-driven serpentine surgical manipulator based on policy gradient methods, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J. and Lau H.Y.K., Learning adaptive reaching skills with nonlinear dynamical systems directly from human demonstrations, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 232-237. |
CHEN J. and Lau H.Y.K., Learning clinical skills for a wire-driven multi-bending minimally invasive surgical manipulator from human demonstration, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J., Qu T. and Lau H.Y.K., Motion planning for a stiffness controllable wire-driven continuum surgical manipulator with learning from demonstration, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
CHEN J. and Lau H.Y.K., Transferring autonomous reaching and targeting behaviors for cable-driven robots in minimally invasive surgery, 2016 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO). IEEE, 2016, 79-84. |
Lau H.Y.K., The power of virtual reality in modern engineering, Cover Story in Hong Kong Engineer - The Journal of the Hong Kong Institution of Engineers, Hong Kong Institution of Engineers . 2016, 44: 8 - 12. |
Lee M.Y.N., Lau H.Y.K., Wong H.K., Tam W.L.W. and Chan L.K.Y., Dendritic Cells for Behaviour Detection in Immersive Virtual Reality Training, In: Max Bramer, Miltos Petridis, Research and Development in Intelligent Systems XXXIII. Cham, Springer International Publishing, 2016, 371-376. |
NG K.T., Chan L.K.Y. and Lau H.Y.K., Corrective feedback for depth perception in CAVE-like systems, IEEE International Conference on Virtual Reality, Los Angeles. 2017, 293 – 294. |
NG K.T., Chan L.K.Y. and Lau H.Y.K., Depth Perception in Virtual Environment: The Effects of Immersive System and Freedom of Movement, 8th International Conference of Human Computer Interaction (HCI2016/VAMR2016), Toronto, Canada. 2016, 17 - 22. |
NG K.T., Chan L.K.Y. and Lau H.Y.K., Depth perception in virtual environment: the effects of immersive sytem and freedom of movement, In: Lackey S and Shumaker R, Virtual, Augmented and Mixed Reality. 2016, 173 - 183. |
Qu T., CHEN J., SHEN S., Xiao Z., Yue Z. and Lau H.Y.K., Motion control of a bio-inspired wire-driven multi-backbone continuum minimally invasive surgical manipulator, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1989-1995. |
SUN P., CHEN J. and Lau H.Y.K., Programming human-like point-to-point approaching movement by demonstrations with Large-Scale Direct Monocular SLAM, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1498-1503. |
Wong E.Y.C., Mo D., Ng C.T.Y., Chan J.K.Y., Chan L.K.Y. and Lau H.Y.K., Development of immersive virtual reality system for planning of cargo loading operations, 19th International Conference on Virtual and Augmented Reality (ICVAR 2017). 2017, 1. |
Wong E.Y.C., Mo D.Y.M., Ng C.T.Y., Chan J.K.Y., Chan L.K.Y. and Lau H.Y.K., Development of immersive virtual reality system for planning of cargo loading operations, International Journal of Computer and Information Engineering. 2017, 4(1): 1. |
ZHANG D., YU C., Desai J., Lau H.Y.K. and Srivathsan S., A time-space network flow approach to dynamic repositioning in bicycle sharing systems, Transportation Research Part B: Methodological. 2016. |
Researcher : Lau TL |
Project Title: | Establishment of the Hong Kong centre for robot competition |
Investigator(s): | Lau TL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | The University of Hong Kong Foundation Seed Grant |
Start Date: | 04/2002 |
Project Title: | Seventh International Conference on Manufacturing A Study on Operations Practices of Hong Kong Manufacturers Key Issues for the Success of Automated Warehouse |
Investigator(s): | Lau TL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | URC/CRCG - Conference Support for Teaching Staff |
Start Date: | 11/2002 |
Researcher : Lee KHC |
List of Research Outputs |
Choy K.L., Ho G.T.S., Lee K.H.C., Lam H.Y., Cheng S.W.Y., Siu P.K.Y., Pang G.K.H., Tang V., Lee J.C.H. and Tsang Y.P., A recursive operations strategy model for managing sustainable chemical product development and production, International Journal of Production Economics. 2016, 181: 262-272. |
Lee K.H.C., A GA-based optimisation model for big data analytics supporting anticipatory shipping in Retail 4.0, International Journal of Production Research. 2017, 55: 593-605. |
Lee K.H.C., Associate Editor, International Journal of Engineering Business Management. 2016. |
Researcher : Lee MYN |
List of Research Outputs |
Lee M.Y.N., Lau H.Y.K., Wong H.K., Tam W.L.W. and Chan L.K.Y., Dendritic Cells for Behaviour Detection in Immersive Virtual Reality Training, In: Max Bramer, Miltos Petridis, Research and Development in Intelligent Systems XXXIII. Cham, Springer International Publishing, 2016, 371-376. |
Researcher : Li Q |
List of Research Outputs |
Li Q., Wang J., Ni J., Chu L.K. and Li C.D., The optimal time to make a risky investment under a permanent exit option, Journal of Intelligent Manufacturing. 2017. |
Ni J., Chu L.K. and Li Q., Capacity Decisions with Debt Financing: The Effects of Agency problem, European Journal of Operational Research. 2017. |
Researcher : Lo VHY |
Project Title: | CEPA smart eco-designTM programme for manufacturing and industrial engineers - enhancement of knowledge of design professionals on eco-design of electronic/engineering products |
Investigator(s): | Lo VHY |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Professional Services Development Assistance Scheme |
Start Date: | 12/2004 |
Project Title: | Web-Based decision support system for polishing process optimization |
Investigator(s): | Lo VHY, Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 01/2006 |
Researcher : Luo H |
List of Research Outputs |
Zhong R.Y., Peng Y., Xue F., Fang J., Zou W., Luo H., Ng T.S.T., Lu W., Shen Q.P. and Huang G.Q., Prefabricated construction enabled by the Internet-of-Things, Automation in Construction. 2017, 76: 59-70. |
Researcher : Mak KL |
Project Title: | Dynamic scheduling of complex assembly manufacturing systems with component substitution options |
Investigator(s): | Mak KL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Incentive Award for RGC GRF Fundable But Not Funded Projects |
Start Date: | 07/2011 |
Researcher : NG KT |
List of Research Outputs |
NG K.T., Chan L.K.Y. and Lau H.Y.K., Corrective feedback for depth perception in CAVE-like systems, IEEE International Conference on Virtual Reality, Los Angeles. 2017, 293 – 294. |
NG K.T., Chan L.K.Y. and Lau H.Y.K., Depth Perception in Virtual Environment: The Effects of Immersive System and Freedom of Movement, 8th International Conference of Human Computer Interaction (HCI2016/VAMR2016), Toronto, Canada. 2016, 17 - 22. |
NG K.T., Chan L.K.Y. and Lau H.Y.K., Depth perception in virtual environment: the effects of immersive sytem and freedom of movement, In: Lackey S and Shumaker R, Virtual, Augmented and Mixed Reality. 2016, 173 - 183. |
Researcher : Ni J |
List of Research Outputs |
Li Q., Wang J., Ni J., Chu L.K. and Li C.D., The optimal time to make a risky investment under a permanent exit option, Journal of Intelligent Manufacturing. 2017. |
Ni J., Chu L.K. and Li Q., Capacity Decisions with Debt Financing: The Effects of Agency problem, European Journal of Operational Research. 2017. |
Researcher : Or KL |
Project Title: | A longitudinal investigation of factors predicting acceptance of a computerized self-management technology among patients with chronic cardiovascular disease via a structural equation model |
Investigator(s): | Or KL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2012 |
Project Title: | the 47th Hawaii International Conference on System Sciences (HICSS); gHealthSmart: Why Global Healthy Life-Style via Mobile Aiding & Robotics Technologies? |
Investigator(s): | Or KL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | URC/CRCG - Conference Support for Teaching Staff |
Start Date: | 01/2014 |
Project Title: | Delivering 21st Century Healthcare in Hong Kong - Building a Quality-and-Efficiency Driven System |
Investigator(s): | Or KL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Theme-based Research Scheme |
Start Date: | 11/2014 |
Project Title: | Evaluating a technology-augmented self-monitoring model for glycemic and blood pressure control and medication adherence in type 2 diabetes and hypertension patients: a randomized controlled trial |
Investigator(s): | Or KL, Tiwari AFY, Cheung BMY |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Health and Medical Research Fund - Full Grant |
Start Date: | 03/2015 |
Project Title: | A pilot experimental study of the effectiveness of different methods of medication double checking |
Investigator(s): | Or KL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 03/2015 |
Completion Date: | 06/2017 |
Project Title: | SMART-CHIT: A Self-Monitoring Adherence and Readiness Theory for Consumer Health Information Technologies among patients with co-morbid type 2 diabetes mellitus and hypertension |
Investigator(s): | Or KL, Cheung BMY, Chan BKP, Tiwari AFY |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 11/2015 |
Project Title: | How young, middle-aged, and older adults differ in pointing and dragging task performance using a mouse, touch screen, and immersive virtual reality? |
Investigator(s): | Or KL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Seed Fund for Basic Research |
Start Date: | 04/2016 |
Completion Date: | 09/2017 |
Project Title: | 33rd International scientific meeting on quality and safety in health care ; FEASIBILITY OF USABILITY TEST IN HUMAN ERROR PRONE INFUSION DEVICE – A PILOT STUDY |
Investigator(s): | Or KL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | URC/CRCG - Conference Support for Teaching Staff |
Start Date: | 10/2016 |
Completion Date: | 10/2016 |
Project Title: | HKU Overseas Fellowship Awards 2017-18 |
Investigator(s): | Or KL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | HKU Overseas Fellowship Awards |
Start Date: | 06/2017 |
Project Title: | A pilot study to determine the feasibility of using a cellphone-based reminder system for medication adherence in patients with type 2 diabetes mellitus |
Investigator(s): | Or KL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Seed Fund for Basic Research |
Start Date: | 06/2017 |
Researcher : Qu T |
Project Title: | Research on Supply Chain Performances of Typical Information Management Strategies under Demand Disruptions |
Investigator(s): | Qu T, Huang GQ |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Seed Fund for Basic Research |
Start Date: | 04/2012 |
Researcher : Qu T |
List of Research Outputs |
CHEN J., Qu T. and Lau H.Y.K., Motion planning for a stiffness controllable wire-driven continuum surgical manipulator with learning from demonstration, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
Qu T., CHEN J., SHEN S., Xiao Z., Yue Z. and Lau H.Y.K., Motion control of a bio-inspired wire-driven multi-backbone continuum minimally invasive surgical manipulator, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1989-1995. |
Researcher : SHEN S |
List of Research Outputs |
Qu T., CHEN J., SHEN S., Xiao Z., Yue Z. and Lau H.Y.K., Motion control of a bio-inspired wire-driven multi-backbone continuum minimally invasive surgical manipulator, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1989-1995. |
Researcher : SUN P |
List of Research Outputs |
CHEN J., SUN P. and Lau H.Y.K., Autonomous robotic manipulation task with programing by demonstration and robot-assisted large-scale direct SLAM, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2016), Daejeon Korea. 2016. |
SUN P., CHEN J. and Lau H.Y.K., Programming human-like point-to-point approaching movement by demonstrations with Large-Scale Direct Monocular SLAM, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1498-1503. |
Researcher : Sculli D |
Project Title: | Inter-organizational information systems and their implications for supply chain management |
Investigator(s): | Sculli D, Humphreys PK, Lai MK |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Other Funding Scheme |
Start Date: | 01/1996 |
Project Title: | Repeat purchases and service quality |
Investigator(s): | Sculli D |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Other Funding Scheme |
Start Date: | 01/2001 |
Researcher : Song M |
Project Title: | Inventory Control under Convex Variable Ordering Cost |
Investigator(s): | Song M |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 09/2011 |
Project Title: | Optimal Inventory Control with Financial Hedging under Stochastic Purchase Price |
Investigator(s): | Song M |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Early Career Scheme (ECS) |
Start Date: | 09/2013 |
Project Title: | Coordinated Pricing and Inventory Management in Market Making |
Investigator(s): | Song M |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2015 |
Researcher : Sun Z |
List of Research Outputs |
Sun Z., Song B., Xi N., Yang R., Hao L., Yang Y. and Chen L., Asymmetric Hysteresis Modeling and Compensation Approach for Nanomanipulation System Motion Control considering Working-range Effect, In: Leopoldo G. Franquelo; K.Ohnishi, IEEE Trans. on Industrial Electronics. The United States, IEEE, 2017. |
Researcher : Tam WLW |
List of Research Outputs |
Lee M.Y.N., Lau H.Y.K., Wong H.K., Tam W.L.W. and Chan L.K.Y., Dendritic Cells for Behaviour Detection in Immersive Virtual Reality Training, In: Max Bramer, Miltos Petridis, Research and Development in Intelligent Systems XXXIII. Cham, Springer International Publishing, 2016, 371-376. |
Researcher : Wang H |
List of Research Outputs |
Wang J., Wang H., ZHOU Y., Wang Y. and Zhang W.J., On an integrated approach to resilient transportation systems in emergency situations, Natural computing. 2017. |
Researcher : Wang J |
Project Title: | Demand Management for Resilient Service System |
Investigator(s): | Wang J |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Seed Fund for Basic Research |
Start Date: | 09/2014 |
Completion Date: | 09/2016 |
Project Title: | Demand management for resilient transportation system under emergency situations |
Investigator(s): | Wang J, Lau HYK, Li Q |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | National Natural Science Foundation of China (NSFC) - General Program |
Start Date: | 01/2016 |
Project Title: | A novel approach to analyzing critical links for urban transportation systems |
Investigator(s): | Wang J |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Seed Fund for Basic Research |
Start Date: | 01/2016 |
Project Title: | A novel resilience measurement approach for transportation systems considering different emergency levels and integrated recovery strategy |
Investigator(s): | Wang J |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Seed Fund for Basic Research |
Start Date: | 01/2017 |
List of Research Outputs |
Li Q., Wang J., Ni J., Chu L.K. and Li C.D., The optimal time to make a risky investment under a permanent exit option, Journal of Intelligent Manufacturing. 2017. |
Wang J., Wang H., ZHOU Y., Wang Y. and Zhang W.J., On an integrated approach to resilient transportation systems in emergency situations, Natural computing. 2017. |
Wang J., Review of Grant Proposals, National Science Foundation of China. 2017. |
Wang J., Towards resilient infrastructure systems, Invited lecture at McMaster University, Canada. 2016. |
Yu Y., Sun W., Tang J., Kaku I. and Wang J., Line- seru conversion towards reducing worker(s) without increasing makespan: models, exact and meta-heuristic solutions , International Journal of Production Research. 2017, 55: 2990-3007. |
Yu Y., Lou Q., Tang J., Wang J. and Yue X., An exact decomposition method to save trips in cooperative pickup and delivery based on scheduled trips and profit distribution, Computers & Operations Research. 2017. |
Yu Y., Sun W., Tang J. and Wang J., Line-hybrid seru system conversion: Models, complexities, properties, solutions and insights, Computers & Industrial Engineering. 2017, 103: 282-299. |
Yu Y., Tang J., Li J., Sun W. and Wang J., Reducing carbon emission of pickup and delivery using integrated scheduling, Transportation Research Part D: Transport and Environment. 2016, 47: 237-250. |
ZHOU Y. and Wang J., Critical Link Analysis for Urban Transportation Systems, IEEE Transactions on Intelligent Transportation Systems. 2017, 1-14. |
ZHOU Y., Sheu J.B. and Wang J., Robustness Assessment of Urban Road Network with Consideration of Multiple Hazard Events, Risk Analysis. 2017. |
Researcher : Wang M |
List of Research Outputs |
Chen J., Wang M., Kong X., Huang G.Q., Dai Q. and Shi G., Manufacturing synchronization in a hybrid flowshop with dynamic order arrivals, Journal of Intelligent Manufacturing. 2017. |
Researcher : Wang X |
List of Research Outputs |
YU Y., Wang X., Zhong R. and Huang G.Q., E-commerce Logistics in Supply Chain Management: Practice Perspective, Procedia CIRP. 2016, 52: 179-185. |
Researcher : Wong ACY |
Project Title: | Modification of the physical, rheological and processing characteristics of polycarbonate (PC) by the addition of acrylonitrile-butadiene-styrene (ABS) |
Investigator(s): | Wong ACY |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Low Budget High Impact Programme |
Start Date: | 11/2001 |
Project Title: | Effects of addition of general purpose polypropylene on the rheological and thermal characteristics of polypropylene fibres |
Investigator(s): | Wong ACY |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 11/2002 |
Researcher : Wong HK |
List of Research Outputs |
Lee M.Y.N., Lau H.Y.K., Wong H.K., Tam W.L.W. and Chan L.K.Y., Dendritic Cells for Behaviour Detection in Immersive Virtual Reality Training, In: Max Bramer, Miltos Petridis, Research and Development in Intelligent Systems XXXIII. Cham, Springer International Publishing, 2016, 371-376. |
Researcher : Wong TN |
Project Title: | A multi-agent approach for dynamic process planning and scheduling using an ant algorithm |
Investigator(s): | Wong TN, Mak KL |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2010 |
Researcher : Xi N |
List of Research Outputs |
CHEN L., DENG L., SHEN W., Xi N., ZHOU Z., SONG B., YANG Y., CHENG Y. and DONG L., Reproducing kernel hilbert space based single infrared image super resolution, Infrared Physics & Technology. 2016, 77: 104-113. |
LI M., LIU L., XIAO X., Xi N. and WANG Y., Effects of methotrexate on the viscoelastic properties of single cells probed by atomic force microscopy, Journal of Biological Physics. 2016, 1-19. |
LI M., XIAO X., LIU L., Xi N. and WANG Y., Rapid recognition and functional analysis of membrane proteins on human cancer cells using atomic force microscopy, Journal of Immunological Methods. 2016, 436: 41-49. |
Sun Z., Song B., Xi N., Yang R., Hao L., Yang Y. and Chen L., Asymmetric Hysteresis Modeling and Compensation Approach for Nanomanipulation System Motion Control considering Working-range Effect, In: Leopoldo G. Franquelo; K.Ohnishi, IEEE Trans. on Industrial Electronics. The United States, IEEE, 2017. |
ZHANG Y., YU F., LI G., LIU L., LIU G., ZHANG Z., WANG Y., WEIJINYA U. and Xi N., Online Determination of Graphene Lattice Orientation Through Lateral Forces, Nanoscale Research Letters. 2016, 11. |
Researcher : Xiao Z |
List of Research Outputs |
Qu T., CHEN J., SHEN S., Xiao Z., Yue Z. and Lau H.Y.K., Motion control of a bio-inspired wire-driven multi-backbone continuum minimally invasive surgical manipulator, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1989-1995. |
Researcher : Xu G |
List of Research Outputs |
Xu G., Huang G.Q., Fang J. and Chen J., Cloud-based smart asset management for urban flood control, Enterprise Information Systems. 2017, 11: 719-737. |
Researcher : Xu S |
Project Title: | INFORMS 2016 Annual Conference; Price-compatible Matching Mechanisms For Carrier Collaboration |
Investigator(s): | Xu S |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | URC/CRCG - Conference Support for Teaching Staff |
Start Date: | 11/2016 |
Completion Date: | 11/2016 |
List of Research Outputs |
Cheng M., Xu S. and Huang G.Q., Truthful multi-unit multi-attribute double auctions for perishable supply chain trading, Transportation Research Part E: Logistics and Transportation Review. 2016, 93: 21-37. |
Xu S., Cheng M., Kong X., Yang H. and Huang G.Q., Private parking slot sharing, Transportation Research Part B: Methodological. 2016, 93: 596-617. |
Xu S., Huang G.Q. and Cheng M., Truthful, Budget-Balanced Bundle Double Auctions for Carrier Collaboration, Transportation Science. 2016. |
Zhang M., Huang G.Q., Xu S. and Zhao Z., Optimization based transportation service trading in B2B e-commerce logistics, Journal of Intelligent Manufacturing. 2016. |
Researcher : YU C |
List of Research Outputs |
ZHANG D., YU C., Desai J., Lau H.Y.K. and Srivathsan S., A time-space network flow approach to dynamic repositioning in bicycle sharing systems, Transportation Research Part B: Methodological. 2016. |
Researcher : YU Y |
List of Research Outputs |
YU Y., Wang X., Zhong R. and Huang G.Q., E-commerce Logistics in Supply Chain Management: Practice Perspective, Procedia CIRP. 2016, 52: 179-185. |
Yu Y., Sun W., Tang J., Kaku I. and Wang J., Line- seru conversion towards reducing worker(s) without increasing makespan: models, exact and meta-heuristic solutions , International Journal of Production Research. 2017, 55: 2990-3007. |
Yu Y., Lou Q., Tang J., Wang J. and Yue X., An exact decomposition method to save trips in cooperative pickup and delivery based on scheduled trips and profit distribution, Computers & Operations Research. 2017. |
Yu Y., Sun W., Tang J. and Wang J., Line-hybrid seru system conversion: Models, complexities, properties, solutions and insights, Computers & Industrial Engineering. 2017, 103: 282-299. |
Yu Y., Tang J., Li J., Sun W. and Wang J., Reducing carbon emission of pickup and delivery using integrated scheduling, Transportation Research Part D: Transport and Environment. 2016, 47: 237-250. |
Researcher : Yang C |
List of Research Outputs |
Huang G.Q., Lan S. and Yang C., Data analysis for metropolitan economic and logistics development, Advanced Engineering Informatics. 2017, 32: 66-76. |
Lan S., Yang C. and Huang G.Q., Data analysis for metropolitan economic and logistics development, Advanced Engineering Informatics. 2017, 32: 66-76. |
Yang C., Lan S., Shen W., Huang G.Q., Wang X. and Lin T., Towards product customization and personalization in IoT-enabled cloud manufacturing, Cluster Computing. 2017, 20: 1717-1730. |
Researcher : Yu Y |
List of Research Outputs |
YU Y., Wang X., Zhong R. and Huang G.Q., E-commerce Logistics in Supply Chain Management: Practice Perspective, Procedia CIRP. 2016, 52: 179-185. |
Yu Y., Sun W., Tang J., Kaku I. and Wang J., Line- seru conversion towards reducing worker(s) without increasing makespan: models, exact and meta-heuristic solutions , International Journal of Production Research. 2017, 55: 2990-3007. |
Yu Y., Lou Q., Tang J., Wang J. and Yue X., An exact decomposition method to save trips in cooperative pickup and delivery based on scheduled trips and profit distribution, Computers & Operations Research. 2017. |
Yu Y., Sun W., Tang J. and Wang J., Line-hybrid seru system conversion: Models, complexities, properties, solutions and insights, Computers & Industrial Engineering. 2017, 103: 282-299. |
Yu Y., Tang J., Li J., Sun W. and Wang J., Reducing carbon emission of pickup and delivery using integrated scheduling, Transportation Research Part D: Transport and Environment. 2016, 47: 237-250. |
Researcher : Yue Z |
List of Research Outputs |
Qu T., CHEN J., SHEN S., Xiao Z., Yue Z. and Lau H.Y.K., Motion control of a bio-inspired wire-driven multi-backbone continuum minimally invasive surgical manipulator, 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO). IEEE, 2016, 1989-1995. |
Researcher : ZHANG D |
List of Research Outputs |
ZHANG D., YU C., Desai J., Lau H.Y.K. and Srivathsan S., A time-space network flow approach to dynamic repositioning in bicycle sharing systems, Transportation Research Part B: Methodological. 2016. |
Researcher : ZHOU Y |
List of Research Outputs |
Wang J., Wang H., ZHOU Y., Wang Y. and Zhang W.J., On an integrated approach to resilient transportation systems in emergency situations, Natural computing. 2017. |
ZHOU Y. and Wang J., Critical Link Analysis for Urban Transportation Systems, IEEE Transactions on Intelligent Transportation Systems. 2017, 1-14. |
ZHOU Y., Sheu J.B. and Wang J., Robustness Assessment of Urban Road Network with Consideration of Multiple Hazard Events, Risk Analysis. 2017. |
Researcher : Zhang M |
List of Research Outputs |
Zhang M., Huang G.Q., Xu S. and Zhao Z., Optimization based transportation service trading in B2B e-commerce logistics, Journal of Intelligent Manufacturing. 2016. |
Zhao Z., Fang J., Huang G.Q. and Zhang M., Location Management of Cloud Forklifts in Finished Product Warehouse, International Journal of Intelligent Systems. 2017, 32: 342-370. |
Researcher : Zhao Z |
List of Research Outputs |
Zhang M., Huang G.Q., Xu S. and Zhao Z., Optimization based transportation service trading in B2B e-commerce logistics, Journal of Intelligent Manufacturing. 2016. |
Zhao Z., Fang J., Huang G.Q. and Zhang M., Location Management of Cloud Forklifts in Finished Product Warehouse, International Journal of Intelligent Systems. 2017, 32: 342-370. |
Researcher : Zhong R |
Project Title: | The INFORMS 2015 Annual Meeting; Big Data Analytics for RFID-Enabled Logistics Data from Ubiquitous Manufacturing Shopfloors |
Investigator(s): | Zhong R |
Department: | Industrial & Mfg Sys Engg |
Source(s) of Funding: | URC/CRCG - Conference Support for Teaching Staff |
Start Date: | 11/2015 |
List of Research Outputs |
LAN S. and Zhong R., An Evaluation Model for Financial Reporting Supply Chain Using DEMATEL-ANP, Procedia CIRP. 2016, 56: 516-519. |
YU Y., Wang X., Zhong R. and Huang G.Q., E-commerce Logistics in Supply Chain Management: Practice Perspective, Procedia CIRP. 2016, 52: 179-185. |