Dept of Mechanical Engg

DEPT OF MECHANICAL ENGG

Researcher : An X

List of Research Outputs

Diao H., Li Y.Y., Chow S.T., An X., Leung Y.L., Cheung K.M.C. and Chan B.P., Intradiscal Delivery of Mesenchymal Stem Cells in Collagen Microspheres in A Rabbit Disc Degeneration Model – A Preliminary Study. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 171.

Researcher : Bai C

List of Research Outputs

Bai C., Constructal Structures for Best System Performance of Nanofluids, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-234.

Researcher : Chan ATY

Project Title:	Strategic guidelines for future development to achieve sustainable air quality in urban areas
Investigator(s):	Chan ATY
Department:	Mechanical Engg
Source(s) of Funding:	Other Funding Scheme
Start Date:	09/1999

Project Title:	Evaluation of air pollution indication system in Hong Kong
Investigator(s):	Chan ATY
Department:	Mechanical Engg
Source(s) of Funding:	Pollution Studies in Hong Kong
Start Date:	01/2000

Project Title:	16th Engineering Mechanics Conference (ASCE) Drag Effect on Mountain Waves by Flow Over Topography
Investigator(s):	Chan ATY
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	07/2003

Project Title:	Indoor/outdoor air quality relationships of respirable suspended particulates, nitrogen oxides and carbon monoxides in urban buildings
Investigator(s):	Chan ATY, Li Y
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	09/2003

Project Title:	Correlation between urban morphological attributes and air pollution in urban areas in Hong Kong
Investigator(s):	Chan ATY
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	09/2004

Project Title:	15th United States National Congress on Theoretical and Applied Mechanics Indoor/outdoor Air Quality Relationship in an Urban Street Canyon
Investigator(s):	Chan ATY
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2006

Researcher : Chan BP

Project Title:	Photochemical crosslinking (PC) technology in fabrication of collagen-based scaffolds for tissue engineering
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	02/2004

Project Title:	International Society for Stem Cell Research 4th ISSCR Annual Meeting A Novel 3-Dimensional Culture System for Human Mesenchymal Stem Cells
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2006

Project Title:	Collagen biomaterial and bone marrow derived mesenchymal stem cell (MSCs) based therapy - Second generation tissue engineering solutions for cartilage repair
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	07/2008

Project Title:	Collagen biomaterial and bone marrow derived mesenchymal stem cell (MSCs) based therapy - Second generation tissue engineering solutions for cartilage repair
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	08/2008

Project Title:	A Novel Cell Delivery Technology Injectable Collagen-Cell Microspheres For Intervertebral Disc Regeneration
Investigator(s):	Chan BP, Chan D, Chan GCF, Cheung KMC, Leung YL, Sze KY
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2009
Completion Date:	12/2011

Project Title:	Creating Stable Tissue Interfaces for Bioengineered Intervertebral Disc Segment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	02/2009

Project Title:	Creating Stable Tissue Interfaces for Bioengineered Intervertebral Disc Segment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	05/2009

Project Title:	Research Output Prize
Investigator(s):	Chan BP, Li CH, Sze KY, Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	Research Output Prize (in Faculty)
Start Date:	12/2009

Project Title:	Selection of human mesenchymal stem cells (hMSCs) sub-populations with better migratory activities using a collagen barrier - A strategy to enhance stem cell engraftment?
Investigator(s):	Chan BP, Chan GCF, Yang Z
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2010

Project Title:	Decellularization of intervertebral disc cell-encapsulated collagen microspheres – A 3D model to study the effects of acellular matrix on stem cell fate
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2010
Completion Date:	11/2011

Project Title:	Bioengineering a Prototype Intervertebral Disc Motion Segment [ITS/552/09FP]
Investigator(s):	Chan BP, Luk KDK, Cheung KMC
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2010

Project Title:	Outstanding Young Researcher Award 2009-10
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Outstanding Young Researcher Award
Start Date:	12/2010

Project Title:	Platform technologies in engineering biomaterial structures with controlled heterogeneity for investigation of stem cell-matrix interactions
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Travel Grants for NSFC/RGC JRS
Start Date:	12/2010

Project Title:	Bioengineering a Prototype Intervertebral Disc Motion Segment
Investigator(s):	Chan BP, Luk KDK, Cheung KMC
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Support Programme (Tier 2)
Start Date:	12/2010
Completion Date:	11/2012

Project Title:	Bioengineering a Prototype Intervertebral Disc Motion Segment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2010

Project Title:	Bioengineering a Prototype Intervertebral Disc Motion Segment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2010

Project Title:	Cellular and molecular mechanism of compression-induced reorientation of human mesenchymal stem cells in 3D collagen constructs
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2011

Project Title:	2011 Asia Pacific Meeting of the Tissue Engineering and Regenerative Medicine International Society (TERMIS) INTRADISCAL DELIVERY OF MESENCHYMAL STEM CELLS IN COLLAGEN MICROSPHERES IN A RABBIT DISC DEGENERATION MODEL - A PRELIMINARY STUDY
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	08/2011
Completion Date:	08/2011

Project Title:	Engineering osteochondral constructs with biological interface using mesenchymal stem cells and collagen
Investigator(s):	Chan BP, Chan D, Cheung KMC, Yan CH
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	12/2011

Project Title:	Developing a multiphoton photochemical crosslinking technology for bio-fabrication of protein structures with micro- and nano-features and tunable properties for stem cell matrix interaction studies
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2012

List of Research Outputs

Chan B.P., Challenges in bioengineering complex tissues, World Forum for Spine Research 2012: The Intervertebral Disc- from Degeneration to Pain, Helsinki, Finland, 18-21 Jun, 2012. 2012.

Chan B.P., Enabling technologies for tissue engineering and regenerative medicine, Biomedical Engineering, Nanyang Technology University, Singapore. 2011.

Chan B.P., Chik T.K., Choy T.H.A., Ma X.Y. and Cheung K.M.C., Materials and Methods for Filling Biological Cavities and Preventing Leakage of Injected Therapeutic Agents (filed on 15 Jun 2012) , Provisional patent (Application No. 61/660,385.). 2012.

Cheng H.W., Luk K.D.K., Cheung K.M.C. and Chan B.P., Generation of an osteochondral interface using rabbit mesenchymal stem cells and collagen gel., Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 70.

Cheng H.W., Luk K.D.K., Cheung K.M.C. and Chan B.P., Generation of an osteochondral interface using rabbit mesenchymal stem cells and collagen gel, Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 85.

Chik T.K., Choy T.H.A., Teng W.K., Ma X.Y., Li Y.Y., Leung Y.L., Cheung K.M.C. and Chan B.P., Developing a photochemically crosslinked collagen plug to solve the cell leakage problem for intra-discal injection of mesenchymal stem cells: A pilot study., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P117.

Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Fabrication of multi-component tissue-like constructs toward spinal motion segment and intervertebral disc tissue engineering (ID: 3876), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China. 2012, P-SAT-B-207.

Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Fabrication of multi-component tissues for intervertebral disc tissue engineering. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 66.

Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Fabrication of multicomponent tissue-like constructs - Towards spinal motion segment tissue engineering, World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P112.

Choy T.H.A., Leong K. and Chan B.P., Collagen-glycosaminoglycan co-precipitate and photochemically crosslinked collagen for disc replacement., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P130.

Choy T.H.A., Leong K. and Chan B.P., The effect of collagen modifications on cytocompatibility of a collagen-glycosaminoglycan matrix. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 63.

Diao H., Yan C.H. and Chan B.P., 3D co-culture of human osteoarthristis chondrocyte and mesenchymal stem cells, Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 17.

Diao H., Li Y.Y., Chow S.T., An X., Leung Y.L., Cheung K.M.C. and Chan B.P., Intradiscal Delivery of Mesenchymal Stem Cells in Collagen Microspheres in A Rabbit Disc Degeneration Model – A Preliminary Study. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 171.

Han S.J. and Chan B.P., Collagen scaffold remodeling by human mesenchymal stem cells and its role in stem cell differentiation., Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 20.

Han S.J. and Chan B.P., Collagen scaffold remodelling by human mesenchymal stem cells. , Days of Molecular Medicine 2011, "Re-engineering Regenerative Medicine" Symposium, 10-12 Nov, Hong Kong.. 2011, 82.

Ho F.C. and Chan B.P., Effect of Cyclic Comperession on Cytoskeleton Network and Associated Molecules of Human Mesemchymal Stem Cells in Three Dimensional Collagen Environments (ID: 3850), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China. 2012, P-SAT-B-201.

Ho F.C. and Chan B.P., Effect of dynamic mechanical compression on actin cytoskeleton network of human mesenchymal stem cells in three dimensional collagen environments. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 74.

Leung C.Y., Chik T.K., Sze K.Y., Cheung K.M.C. and Chan B.P., Development of a shear test system for measuring the interfacial strength of osteochondral grafts from rabbits of different skeletal maturity, The Hong Kong Institution of Engineers Transactions. 2011, 19(3): 39-45.

Leung Y.L., Tam V., Chan D., Chan B.P. and Cheung K.M.C., Tissue engineering for intervertebral disk degeneration, Orthopedic Clinics of North America. 2011, 42(4): 575-584.

Li C.W. and Chan B.P., Compression Regulates Cell-Matrix Adhesions and Intracellular Signaling Proteins of Human Mesenchymal Stem Cells in 3D Collagen Environment. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 35.

Li C.W. and Chan B.P., Dynamic compression regulated cell-matrix adhesions and intracellular signaling proteins of human mesenchymal stem cells in 3D collagen environment (ID:3855), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China, 2012. P-SAT-B-207.

Li Y.Y., Cheng H.W., Chan P.M., Wong M.Y., Teng W.K., Chow S.T., Cheung K.M.C., Chan D. and Chan B.P., Collagen-mesenchymal stem cell microspheres for the repair of articular cartilage defects in a rabbit model., Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 86.

Li Y.Y., Diao H., Chow S.T., Leung Y.L., Cheung K.M.C. and Chan B.P., Intradiscal delivery of mesenchymal stem cells in collagen microspheres in a rabbit disc degeneration model: A preliminary study., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P113.

Liu T., Houle J.D., Xu J., Chan B.P. and Chew S.Y., Nanofibrous collagen nerve conduits for spinal cord repair., Journal of Biomedical Materials Research Part A.. 2012, 18(9-10): 1057-1066.

Liu T., Houle J.D., Xu J., Chan B.P. and Chew S.Y., Nanofibrous collagen nerve conduits for spinal cord repair, Tissue Engineering Part A . 2012, 18(9-10): 1057-1066.

Liu T., Xu J., Chan B.P. and Chew S.Y., Sustained release of neurotrophin-3 and chondroitinase ABC from electrospun collagen nanofiber scaffold for spinal cord injury repair, Journal of Biomedical Materials Research Part A.. 2011.

Ma J. and Chan B.P., Femtosecond laser-induced two-photon fabrication of protein structures with controllable voxel features (ID: 4126), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China, 2012. P-MON-C-051.

Ma J., Xu J., Cheng J.P., Cheng S.H. and Chan B.P., Free form submicron-biofabrication of protein matrix via multiphoton photochemical crosslinking. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 125.

Shen Y., Ng V.C.W., Shen W., Norito S., Cheung S.K.C., Agata K., Chan B.P., Lam Y.W. and Chan D., Extracellular matrix and stem cell niche in the regenerating planarian, 2012 Hong Kong Inter-University Postgraduate Symposium on Life Science, The Hong Kong University of Science and Technology, 9 June 2012.

Shen Y., Ng V.C.W., Shen W., Norito S., Cheung S.K.C., Agata K., Chan B.P., Lam Y.W. and Chan D., Extracellular matrix and the stem cell niche in the regenerating planarian, 16th Research Postgraduate Symposium, HKU, December 7-8, 2011. Hong Kong.

Wong M.Y., Wong H.L., Chan S., Chan G.C.F. and Chan B.P., Regulation of migration characteristics of human mesenchymal stem cells (hMSCs) by encapsulation in collagen matrix. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 182.

Wong Y.K., Han S.J., Chan C.H., Shum D.K.Y., Chan G.C.F. and Chan B.P., Characterization of human mesenchymal stem cells selected by collagen barrier., Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 182.

Xu J., Ma J., Cheng J.P., Cheng S.H. and Chan B.P., Multiphoton fabrication of micro-engineered structures with controllable porosity and mechanical properties. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 122.

Yeung C.W., Au Y.K., Gao Y., Chan D., Cheah K.S.E. and Chan B.P., Developing three dimensional culture system for Notochordal cells. , World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P116.

Yeung C.W. and Chan B.P., Effect of cyclic compression loading on human mesenchymal stem cells-collagen microspheres in rabbit intervertebral disc organ culture (ID: 3857), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China. 2012, P-SAT-B-206.

Yuan M., Yeung C.W. and Chan B.P., Decellularization of Nucleus Pulposus Cell-Encapsulated Collagen Microspheres and Susceptibility of the Matrix to Recellularization with Mesenchymal Stem Cells. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 120.

Yuan M., Yeung C.W. and Chan B.P., Reconstitution of nucleus pulposus cell matrix niche in 3D configuration for mesenchymal stem cell differentiation., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P127.

Yuan M., Leong K. and Chan B.P., Three dimensional culture of rabbit nucleus pulposus cells in collagen microspheres, Spine J. 2011.

Researcher : Chan CW

Project Title:	IFAC Symposium on Artificial Intelligence in Real Time Control AIRTC-2000 Adaptive Control of Stochastic Nonlinear Systems Using Neurofuzzy Networks Modelling of Nonlinear Dynamic Systems Using Support Vector Neural Networks
Investigator(s):	Chan CW
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	10/2000

Project Title:	International Federation of Automatic Control 15th IFAC World Congress Asymptotic Local Approach in Fault Detection with Faults Modeled by Neurofuzzy Networks
Investigator(s):	Chan CW
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	07/2002

Project Title:	Installation of wave suppressor in the Victoria Harbour
Investigator(s):	Chan CW
Department:	Mechanical Engg
Source(s) of Funding:	Utility Information Ltd.
Start Date:	06/2006

Project Title:	Neurofuzzy network based adaptive control for nonlinear networked control systems
Investigator(s):	Chan CW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2008

Project Title:	Wireless networked control of unmaaned mini-helicopters based on neurofuzzy networks
Investigator(s):	Chan CW
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	12/2008

Researcher : Chan KL

Project Title:	High Resolution Thermal Imaging Microscope for Organic and Inorganic Electronics
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	11/2008
Completion Date:	10/2011

Project Title:	High performance organic memory memories
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	10/2011

Project Title:	2011 MRS Fall Meeting & Exhibit Performance Enhancement by Multijunction Organic Solar Cells Low driving voltage organic transistor with high k amorphous
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	11/2011
Completion Date:	12/2011

List of Research Outputs

Hui S.C.M. and Chan K.L., Biodiversity assessment of green roofs for green building design, Proceedings of Joint Symposium 2011: Integrated Building Design in the New Era of Sustainability, 22 November 2011 (Tue), Kowloon Shangri-la Hotel, Tsim Sha Tsui East, Kowloon, Hong Kong. Hong Kong, ASHRAE-HKC/CIBSE-HKB/HKIE-BSD, 2011, 10.1-10.8.

Ren X., Wang Z.R., Xin J.Z., Wang X.L., Shi S.Q., Ruotolo A., Chan K.L. and Leung C.W., Low power flexible organic thin film transistors with amorphous Ba0.7Sr0.3TiO3 gate dielectric grown by pulsed laser deposition at low temperature, In: Prof. Antoine Kahn, Organic Electronics. Elsevier, 2012, 13: 1223.

Ren X., Wang S.M., Leung C.W., Yan F. and Chan K.L., Thermal annealing and temperature dependences of memory effect in organic memory transistor, Applied Physics Letters. American Institute of Physics, 2011, 99: 043303.

Wang J.C., Shi S.Q., Leung C.W., Lau S.P., Wong K.Y. and Chan K.L., Short circuit current improvement in planar heterojunction organic solar cells by multijunction charge transfer, In: Nghi Q. Lam, Applied Physics Letters. American Institute of Physics, 2012, 100: 053301.

Wang J.C., Shi S.Q., Leung C.W. and Chan K.L., Short circuit current improvement in planar heterojunction organic solar cells by multijunction charge transfer, MRS Fall 2011. Boston, MA, USA, Poster.

Wang Z.R., Xin J.Z., Ren X., Leung C.W. and Chan K.L., High mobility low driving voltage organic transistor with high k amorphous BST (Ba_0.7Sr_0.3TiO₃) gate dielectric on flexible substrate, MRS Fall 2011. Boston, MA, USA, Poster.

Researcher : Chan KW

Project Title:	Computer-aided mould design and manufacture of thermoformed PVC sheets
Investigator(s):	Chan KW
Department:	Mechanical Engg
Source(s) of Funding:	Other Funding Scheme
Start Date:	01/2002

Project Title:	Design and development of implantable artifical finger joints for biological repair
Investigator(s):	Chan KW, Chow SP, Lu WW, Chiu PKY, Ngan AHW, Luk KDK
Department:	Mechanical Engg
Source(s) of Funding:	Guangdong-Hong Kong Technology Cooperation Funding Scheme
Start Date:	06/2007

Project Title:	Design and development of implantable artifical finger joints for biological repair
Investigator(s):	Chan KW
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	10/2009

Project Title:	Design and development of implantable artifical finger joints for biological repair
Investigator(s):	Chan KW
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	10/2009

Researcher : Chan MC

List of Research Outputs

Chan M.C. and Liu C.H., Large-Eddy Simulation of Flows over Idealized Urban Roughness in Unstable Thermal Stratification, 16th Annual Conference of Hong Kong Theoretical and Applied Mechanics; 1st Mainland - Hong Kong Youth Forum on Mechanics; and 8th Shanghai – Hong Kong Forum on Mechanics and Its Applications, March 17, 2012, City University of Hong Kong, Hong Kong . 2012.

Chan M.C. and Liu C.H., Large-eddy simulation of flows & pollutant dispersion over urban areas in thermal stratification, Croucher Advanced Study Institute 2011-2012, Urban Climatology for Tropical and Sub-Tropical Regions, December 5 to 10, 2011, School of Architecture, The Chinese University of Hong Kong. 2011.

Chan M.C. and Liu C.H., Large-eddy simulation of flows over idealized urban areas in thermal stratification, European Geosciences Union General Assembly 2012, April 22 to 27, 2012, Vienna, Austria. 2012.

Researcher : Chan PM

List of Research Outputs

Li Y.Y., Cheng H.W., Chan P.M., Wong M.Y., Teng W.K., Chow S.T., Cheung K.M.C., Chan D. and Chan B.P., Collagen-mesenchymal stem cell microspheres for the repair of articular cartilage defects in a rabbit model., Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 86.

Researcher : Chan YJ

Project Title:	Internoise 2011 Constraints of ideal broadband noise cancellation in feedforward active noise control systems
Investigator(s):	Chan YJ
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	09/2011
Completion Date:	09/2011

Project Title:	Investigation of the acoustic impedance of a noise-cancellation loudspeaker in active noise control (ANC) action
Investigator(s):	Chan YJ, Huang L, Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	01/2012
Completion Date:	12/2012

List of Research Outputs

Chan Y.J., Huang L. and Lam J., Constraints of ideal broadband noise cancellation in feedforward active noise control systems, Inter-noise 2011.

Tse Z.T.H., Chan Y.J., Janssen H., Hamed A., Young I. and Lamperth M., Piezoelectric actuator design for MR elastography: implementation and vibration issues, The International Journal of Medical Robotics and Computer Assisted Surgery. John Wiley & Sons, 2011.

Researcher : Chan YL

List of Research Outputs

Chan Y.L., Ngan A.H.W. and King N.M., Nano-scale structure and mechanical properties of the human dentine-enamel junction , Journal of the Mechanical Behaviour of Biomedical Materials. 2011, 4: 785-795.

Chan Y.L., Ngan A.H.W. and King N.M., Nanomechanical Characterization of Mineralized Tissues in the Oral Cavity, In: Karthikeyan Subramani; Waqar Ahmed, Emerging Nanotechnologies in Dentistry: Materials, Processes, and Applications. 2011.

Ngan A.H.W., Tang B., Chan Y.L., Wu K.S. and Zhou Z., "Nanomechanical Characterization of Biological Tissues", Invited Talk,, 4th International Indentation Workshop (IIW4), July 3-8, 2011, Seoul National University, South Korea.. 2011.

Researcher : Chen H

List of Research Outputs

Su Y., Chen H., Li J.J. and Soh A.K., Effects of surface tension on the size-dependent ferroelectric characteristics of free-standing BaTiO3 nano-thin films, Journal of Applied Physics. 2011, 110(8): 084108.

Researcher : Chen K

Project Title:	Virtual component modelling for components made of a multiphase perfect material
Investigator(s):	Chen K
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	02/2005

Researcher : Chen KZ

Project Title:	Virtual component modelling for components made of a multiphase perfect material
Investigator(s):	Chen K
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	02/2005

Researcher : Chen MZ

Project Title:	Passive network synthesis with restricted complexity
Investigator(s):	Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	08/2010
Completion Date:	08/2012

Project Title:	Restricted Complexity Passive Network Synthesis
Investigator(s):	Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	7th IFAC Symposium on Robust Control Design New criteria of reachable set estimation for time delay systems subject to polytopic uncertainties
Investigator(s):	Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2012
Completion Date:	06/2012

Project Title:	Model Predictive Control for Smart Grid
Investigator(s):	Chen MZ, Chu YC
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2012

List of Research Outputs

Chen M.Z., Guest Associate Editor, In: Prof. Guanrong Chen, International Journal of Bifurcation and Chaos. World Scientific Publishing, 2012.

Chen M.Z., Hu Y. and Du B., Suspension performance with one damper and one inerter, The 24th Chinese Control and Decision Conference (CCDC). 2012.

Cheng Z., Zhang H.T., Chen M.Z., Zhou T. and Valeyev N.V., Aggregation pattern transitions by slightly varying the attractive/repulsive function, PLoS ONE. 2011.

Chu Y.C. and Chen M.Z., Efficient model predictive algorithms for tracking of periodic signals, Journal of Control Science and Engineering. 2011, 2012.

Kotov N.V., Bates D.B., Gizatullina A.N., Gilaziev B., Khairullin R.N., Chen M.Z., Drozdov I., Umezawa Y., Hundhausen C., Aleksandrov A., Yan X., Spurgeon S., Smales M. and Valeyev N.V., Computational modelling elucidates the mechanism of ciliary regulation in health and disease, BMC Systems Biology. 2011, 5.

Li C., Chen M.Z. and Lo K...-.T..., Breaking an image encryption algorithm based on chaos, International Journal of Bifurcation and Chaos. 2011.

Su H., Rong Z., Chen M.Z., Wang X.F., Chen G.R. and Wang H., Decentralized adaptive pinning control for cluster synchronization of complex dynamical networks, IEEE Transactions on Systems, Man, and Cybernetics: Part B. 2012.

Tan K.T., So P.L., Chu Y.C. and Chen M.Z., Smart distribution network device for microgrid applications, The 15th IEEE International Conference on Harmonics and Quality of Power. 2012.

Wang K. and Chen M.Z., Realization of biquadratic impedances with at most four elements, The 24th Chinese Control and Decision Conference (CCDC). 2012.

Wang Q., Du B., Lam J. and Chen M.Z., Stability analysis of Markovian jump systems with multiple delay components and polytopic uncertainties, Circuits, Systems, and Signal Processing. 2012, 31: 143-162.

Wang Y., Sun Y., Zuo Z. and Chen M.Z., Robust H control of discrete-timeMarkovian jump systems in the presence of incomplete knowledge of transition probabili-ties and saturating actuator, International Journal of Robust and Nonlinear Control. 2011.

Zhang W., Liang Y., Su H., Chen M.Z. and Han Z., Robust stabilization of a class of nonlinear systems with uncertain parameters based on CLFs, The 30th Chinese Control Conference. 2011.

Zuo Z., Chen Y., Wang Y. and Chen M.Z., New criteria of reachable set estimation for time delay systems subject to polytopic uncertainties, The 7th IFAC Symposium on Robust Control Design (Rocond 2012). 2012.

Researcher : Chen X

List of Research Outputs

Chen X., Plastic Deformation of Silver Micro-wires under Uniaxial Tension, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-100.

Chen X. and Ngan A.H.W., Tensile deformation of silver micro-wires of small thickness-to-grain-size ratios, Materials Science and Engineering A. Elsevier B.V., 2012, 539: 74-84.

Researcher : Chen YH

Project Title:	Design, analysis and fabrication of microfluidic device for biomedical applications
Investigator(s):	Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2010

Project Title:	Investigation of topology optimization based on a visibility sphere
Investigator(s):	Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2011

Project Title:	Design for manufacturing constrained topology optimization with feature based automatic CAD model reconstruction
Investigator(s):	Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	9th International Conference on Manufacturing Research SHAPE DESIGN BASED ON SUBDIVISION SURFACE AND HAPTIC FEEDBACK
Investigator(s):	Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	09/2011
Completion Date:	09/2011

Project Title:	Instant three dimensional prototyping based on hologram
Investigator(s):	Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	05/2012

List of Research Outputs

Ye R., Chen Y.H. and Yau W.P., A simple and novel hybrid robotic system for robot-assisted femur fracture reduction, Advanced Robotics. 2012, 26(1-2): 83-104.

Researcher : Cheng C

List of Research Outputs

Cheng C. and Ngan A.H.W., Modelling and simulation of self-ordering in anodic porous alumina, Electrochimica Acta. Elsevier Ltd, 2011, 56: 9998-10008.

Cheng C., Ng K.Y. and Ngan A.H.W., Quantitiative characterization of acid concentration and temperature dependent self-ordering conditions of anodic porous alumina, AIP Advances. 2011, 1: 042113/1 - 042113/11.

Ngan A.H.W., Ng K.Y. and Cheng C., “Anodized porous alumina with controlled pore-channel ordering – fabrication, theory and mechanical properties”, Special Lecture, , 6th International Conference on Advanced Materials Development and Performance, Tokushima, Japan, July 15-18, 2011.. 2011.

Researcher : Cheng HW

List of Research Outputs

Cheng H.W., Luk K.D.K., Cheung K.M.C. and Chan B.P., Generation of an osteochondral interface using rabbit mesenchymal stem cells and collagen gel., Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 70.

Cheng H.W., Luk K.D.K., Cheung K.M.C. and Chan B.P., Generation of an osteochondral interface using rabbit mesenchymal stem cells and collagen gel, Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 85.

Cheng H.W., Stem-cell Based Osteochondral Interface Tissue Engineering, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-182.

Li Y.Y., Cheng H.W., Chan P.M., Wong M.Y., Teng W.K., Chow S.T., Cheung K.M.C., Chan D. and Chan B.P., Collagen-mesenchymal stem cell microspheres for the repair of articular cartilage defects in a rabbit model., Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 86.

Researcher : Cheng HW

List of Research Outputs

Cheng H.W., Stem-cell Based Osteochondral Interface Tissue Engineering, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-182.

Researcher : Cheng WC

List of Research Outputs

Cheng W.C. and Liu C.H., Effect of unstable thermal stratification on the atmospheric boundary layer above urban street canyon by large-eddy simulation, HARMO14 - 14th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes, October 2 to 6, 2011, Kos Island, Greece. 2011.

Cheng W.C. and Liu C.H., Large-eddy simulation of the atmospheric boundary layer above urban street canyons with different unstable stratification, International Workshop on Urban Weather and Climate: Observation and Modeling, July 12 to 15, 2011, Beijing, China. 2011.

Liu C.H., Cheng W.C., Chung N.H., Wong C.C. and Leung K.K., On the Mechanism of Pollutant Removal from Two-Dimensional Idealized Urban Street Canyons, International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Researcher : Cheng WC

List of Research Outputs

Researcher : Cheung KC

Project Title:	14th World Congress of International Federation of Automatic Control A Fast On-Line Training Algorithm for Neurofuzzy Networks
Investigator(s):	Cheung KC
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	07/1999

Project Title:	A study on the use of fuel cells as replacement for lead-acid batteries in solar-based electrical power generation
Investigator(s):	Cheung KC
Department:	Mechanical Engg
Source(s) of Funding:	Low Budget High Impact Programme
Start Date:	11/2001

Project Title:	A study on solar-powered water electrolysis for hydrogen production
Investigator(s):	Cheung KC
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	11/2002

Project Title:	Operator and artificial intelligence based approaches to construct the sound perceived by human beings
Investigator(s):	Cheung KC, Huang L, Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2009

Project Title:	Stability analysis of uncertain stochastic neural networks with delays
Investigator(s):	Cheung KC, Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	01/2010

Project Title:	Multi-objective control of vehicle active suspension system
Investigator(s):	Cheung KC, Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	04/2011

Project Title:	Optimization Approach to Controlling Vibration of Buildings
Investigator(s):	Cheung KC, Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	06/2012

Researcher : Cheung SC

List of Research Outputs

Cheung S.C., Broadband Noise Control Through a Ducted Opening, PhD Thesis. Hong Kong, The University of Hong Kong, 2012, 1-187.

Cheung S.C., Wang C. and Huang L., Numerical study on scattering and absorption by periodically arranged acoustical treatment at oblique incidence., Acoustics Hong Kong 2012, 13-18 May 2012 (abstract book published as a special issue of Journal of the Acoustical Society of America). 2012, 131(4), Pt. 2: 3300-3300.

Researcher : Cheung WL

List of Research Outputs

Duan B., Wang M., Zhou W. and Cheung W.L., Nonisothermal melt-crystallization behavior of Ca-P/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanocomposite microspheres, Polymer Engineering and Science. USA, Wiley, 2011, 51: 1580-1591.

Researcher : Chik TK

List of Research Outputs

Chan B.P., Chik T.K., Choy T.H.A., Ma X.Y. and Cheung K.M.C., Materials and Methods for Filling Biological Cavities and Preventing Leakage of Injected Therapeutic Agents (filed on 15 Jun 2012) , Provisional patent (Application No. 61/660,385.). 2012.

Chik T.K., Choy T.H.A., Teng W.K., Ma X.Y., Li Y.Y., Leung Y.L., Cheung K.M.C. and Chan B.P., Developing a photochemically crosslinked collagen plug to solve the cell leakage problem for intra-discal injection of mesenchymal stem cells: A pilot study., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P117.

Chik T.K., Fabrication of Multi-component Tissue for Intervertebral Disc Tissue Engineering, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-196.

Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Fabrication of multi-component tissue-like constructs toward spinal motion segment and intervertebral disc tissue engineering (ID: 3876), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China. 2012, P-SAT-B-207.

Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Fabrication of multi-component tissues for intervertebral disc tissue engineering. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 66.

Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Fabrication of multicomponent tissue-like constructs - Towards spinal motion segment tissue engineering, World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P112.

Leung C.Y., Chik T.K., Sze K.Y., Cheung K.M.C. and Chan B.P., Development of a shear test system for measuring the interfacial strength of osteochondral grafts from rabbits of different skeletal maturity, The Hong Kong Institution of Engineers Transactions. 2011, 19(3): 39-45.

Researcher : Chik TK

List of Research Outputs

Chik T.K., Fabrication of Multi-component Tissue for Intervertebral Disc Tissue Engineering, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-196.

Researcher : Chow KW

Project Title:	Nonlinear localized modes and their dynamics: applications in hydrodynamics and optics
Investigator(s):	Chow KW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2006

Project Title:	Wave propagation in non-uniform media: Effects of amplification / attenuation and marginal stability
Investigator(s):	Chow KW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2009
Completion Date:	12/2011

Project Title:	Phase matching and coherently coupled waveguides: Birefringence and second harmonic generation
Investigator(s):	Chow KW
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2010
Completion Date:	08/2011

Project Title:	Dissipative localized modes: pulses and fronts in complex Ginzburg - Landau models
Investigator(s):	Chow KW
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	An integrated platform for analysis and surgical training of aneurysms and dissections in major arteries
Investigator(s):	Chow KW, Cheng SWK, Yu ACH, Chan KW
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2011

Project Title:	An integrated platform for analysis and surgical training of aneurysms and dissections in major arteries
Investigator(s):	Chow KW, Cheng SWK, Yu ACH, Chan KW
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Support Programme (Tier 3)
Start Date:	12/2011

List of Research Outputs

Chow K.W., Logarithmic nonlinear Schrodinger equation and irrotational, compressible flows: An exact solution, Physical Review E. 2011, 84: 016308-1 to 016308-7.

Fan E.G., Chow K.W. and Li J., On doubly periodic standing wave solutions of the coupled higgs field equation, Studies in Applied Mathematics. Massachusetts Institute of Technology, 2011, 128: 86-105.

Fan Y., Cheung L.K., Chong M.M., Chua H.D.P., Chow K.W. and Liu C.H., Computational fluid dynamics analysis on the upper airways of obstructive sleep apnea using patient = specific models, IAENG International Journal of Computer Science. 2011, 38:4: 10.

Fan Y. and Chow K.W., Computational studies of aneurysms and dissection, European Biomedical Engineering Conference, London, United Kingdom. 2011.

Lai S.K., Harrington J., Xiang Y. and Chow K.W., Accurate analytical perturbation approach for large amplitude vibration of functionally graded beams, International Journal of Non-Linear Mechanics. 2012, 47: 473-480.

Lai S.K. and Chow K.W., Exact solutions for oscillators with quadratic damping and mixed-parity nonlinearity, Physica Scripta. UK and USA, The Royal Swedish Academy of Sciences, 2012, 85: 045006 (6pp).

Li J.H., Lou S.Y. and Chow K.W., Doubly periodic patterns of modulated hydrodynamic waves: Exact solutions of the Davey-Stewartson system, accepted and to appear in Acta Mechanica Sinica. 2011.

Li J.H., Chiang K.S. and Chow K.W., Modulation instabilities in two-core optical fibers, Journal of the Optical Society of America B (Optical Physics). 2011, 28: 1693-1701.

Qin Z. and Chow K.W., The one dimensional motion of a monatomic gas with a gaussian decay in density, Journal of the Physical Society of Japan. the Physical Society of Japan, 2012, 81: 035004-1 to 035004-2.

Rogers C., Malomed B. and Chow K.W., Invariants in a resonant derivative nonlinear Schrödinger model, Journal of Physics A: Mathematical and Theoretical. UK & USA, IOP Publishing Ltd., 2012, 45: 155205 (7pp).

Tsang A.C.H., Malomed B.A. and Chow K.W., Multistable dissipative structures pinned to dual hot spots, Physical Review E. American Physical Society, 2011, 84: 066609-1 to 066609-11.

Researcher : Chow ST

List of Research Outputs

Diao H., Li Y.Y., Chow S.T., An X., Leung Y.L., Cheung K.M.C. and Chan B.P., Intradiscal Delivery of Mesenchymal Stem Cells in Collagen Microspheres in A Rabbit Disc Degeneration Model – A Preliminary Study. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 171.

Li Y.Y., Cheng H.W., Chan P.M., Wong M.Y., Teng W.K., Chow S.T., Cheung K.M.C., Chan D. and Chan B.P., Collagen-mesenchymal stem cell microspheres for the repair of articular cartilage defects in a rabbit model., Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 86.

Li Y.Y., Diao H., Chow S.T., Leung Y.L., Cheung K.M.C. and Chan B.P., Intradiscal delivery of mesenchymal stem cells in collagen microspheres in a rabbit disc degeneration model: A preliminary study., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P113.

Researcher : Choy THA

List of Research Outputs

Chan B.P., Chik T.K., Choy T.H.A., Ma X.Y. and Cheung K.M.C., Materials and Methods for Filling Biological Cavities and Preventing Leakage of Injected Therapeutic Agents (filed on 15 Jun 2012) , Provisional patent (Application No. 61/660,385.). 2012.

Chik T.K., Choy T.H.A., Teng W.K., Ma X.Y., Li Y.Y., Leung Y.L., Cheung K.M.C. and Chan B.P., Developing a photochemically crosslinked collagen plug to solve the cell leakage problem for intra-discal injection of mesenchymal stem cells: A pilot study., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P117.

Choy T.H.A., Leong K. and Chan B.P., Collagen-glycosaminoglycan co-precipitate and photochemically crosslinked collagen for disc replacement., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P130.

Choy T.H.A., Leong K. and Chan B.P., The effect of collagen modifications on cytocompatibility of a collagen-glycosaminoglycan matrix. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 63.

Researcher : Chu HCW

List of Research Outputs

Chu H.C.W., Electro-hydrodynamic Flow Through Channels with Micro-patterned Walls, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-187.

Chu H.C.W. and Ng C.O., Electrokinetic flows through a parallel-plate channel with slipping stripes on walls, Bulletin of the American Physical Society. The 64th Annual Meeting of the APS Division of Fluid Dynamics, Baltimore, Maryland, U.S.A., November 20–22. USA, APS, 2011, 56(18): 133.

Chu H.C.W. and Ng C.O., Oscillatory electrokinetic slip flows through a micropatterned channel, In: Jane W.Z. Lu and Jeff J.F. Wang, Proceedings of the 16th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 1st Mainland-Hong Kong Youth Forum on Mechanics, and the 8th Shanghai-Hong Kong Forum on Mechanics and Its Application, Hong Kong, March 17. HKSTAM, 2012, 80.

Ng C.O. and Chu H.C.W., Electrokinetic flows through a parallel-plate channel with slipping stripes on walls, Physics of Fluids. New York, USA, AIP, 2011, 23(10): 102002.

Researcher : Chu YC

List of Research Outputs

Chu Y.C. and Chen M.Z., Efficient model predictive algorithms for tracking of periodic signals, Journal of Control Science and Engineering. 2011, 2012.

Tan K.T., So P.L., Chu Y.C. and Chen M.Z., Smart distribution network device for microgrid applications, The 15th IEEE International Conference on Harmonics and Quality of Power. 2012.

Researcher : Chung NH

List of Research Outputs

Chung N.H. and Liu C.H., A study of local instability of reactive pollutant dispersion using large-eddy simulation, International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Chung N.H., Forced convective heat transfer over ribs at various separation, International Journal of Heat and Mass Transfer. Elsevier Ltd, 2012, 55: 5111-5119.

Chung N.H., Large-eddy Simulation of Transport of Inert and Chemically Reactive Pollutants over 2D Idealized Street Canyons, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-89.

Chung N.H. and Liu C.H., Large-eddy simulation of reactive pollutant dispersion for the spatial instability of photostationary state over idealized 2D urban street canyons, 14th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes, October 2 to 6, 2011, Kos Island.. 2011.

Chung N.H., Tse Y.Y. and Liu C.H., Study of pollutant transfer coefficient in street canyons in different flow regimes with large-eddy simulation and k-ε turbulence modeling, First International Conference on Sustainable Urbanization (ICSU 2010), December 15 to 17, 2010, Hong Kong, China. 2011.

Chung N.H. and Liu C.H., Ventilation and pollutant removal performance in street canyons of different aspect ratios: an LES solution, 13th International Conference on Wind Engineering (ICWE13), July 10 to 15, 2011, Amsterdam, The Netherlands. 2011.

Liu C.H. and Chung N.H., Forced convective heat transfer over ribs at various separation, International Journal of Heat and Mass Transfer. Elsevier, 2012, 55: 5111-5119.

Liu C.H., Cheng W.C., Chung N.H., Wong C.C. and Leung K.K., On the Mechanism of Pollutant Removal from Two-Dimensional Idealized Urban Street Canyons, International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Liu C.H. and Chung N.H., On the NOx-O3 Plume Transport over Two-Dimensional Idealized Urban Street Canyons, 13th International Conference on Wind Engineering (ICWE13), July 10 to 15, 2011, Amsterdam, The Netherlands. 2011.

Researcher : Chung NH

List of Research Outputs

Chung N.H., Forced convective heat transfer over ribs at various separation, International Journal of Heat and Mass Transfer. Elsevier Ltd, 2012, 55: 5111-5119.

Chung N.H., Large-eddy Simulation of Transport of Inert and Chemically Reactive Pollutants over 2D Idealized Street Canyons, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-89.

Liu C.H. and Chung N.H., Forced convective heat transfer over ribs at various separation, International Journal of Heat and Mass Transfer. Elsevier, 2012, 55: 5111-5119.

Researcher : Deng Y

List of Research Outputs

Leung Y.C., Deng Y. and Leung M.K.H., Parametric study of a fan-bladed microwind turbine, Journal of Power and Energy. UK, IMechE, 2011, 225: 1120-1131.

Researcher : Diao H

List of Research Outputs

Diao H., Yan C.H. and Chan B.P., 3D co-culture of human osteoarthristis chondrocyte and mesenchymal stem cells, Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 17.

Diao H., Li Y.Y., Chow S.T., An X., Leung Y.L., Cheung K.M.C. and Chan B.P., Intradiscal Delivery of Mesenchymal Stem Cells in Collagen Microspheres in A Rabbit Disc Degeneration Model – A Preliminary Study. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 171.

Li Y.Y., Diao H., Chow S.T., Leung Y.L., Cheung K.M.C. and Chan B.P., Intradiscal delivery of mesenchymal stem cells in collagen microspheres in a rabbit disc degeneration model: A preliminary study., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P113.

Researcher : Du B

List of Research Outputs

Du B., Lam J. and Shu Z., H_¥ and passivity control via static and integral output feedback for systems with input delay, Journal of Dynamic Systems, Measurement, and Control. 2012, 134(2): Article No. 021004.

Researcher : Du Q

List of Research Outputs

Du Q., Numerical Study of the Hydrodynamic Performance of a Point-Absorbing Wave Energy Converter, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-135.

Researcher : Duan B

List of Research Outputs

Duan B. and Wang M., Customized nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering, In: Edited by Gilson Khang, Handbook of Intelligent Scaffold for Regenerative Medicine. Singapore, Pan Stanford Publishing, 2011, 925-953.

Duan B., Wang M. and Lu W.W., Nanocomposite scaffolds for bone tissue engineering: design, advanced fabrication and biological evaluation, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Duan B., Wang M., Zhou W. and Cheung W.L., Nonisothermal melt-crystallization behavior of Ca-P/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanocomposite microspheres, Polymer Engineering and Science. USA, Wiley, 2011, 51: 1580-1591.

Duan B., Wang M. and Lu W.W., Selective laser sintered Ca-P/PHBV nanocomposite scaffolds with sustained release of rhBMP-2 for bone tissue engineering, Best Paper Award at the 35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’11). Daytona Beach, FL, USA, 2011.

Duan B. and Wang M., Selective laser sintering and its application in biomedical engineering, MRS Bulletin. USA, Materials Research Society, 2011, 36: 998-1005.

Duan B., Wang M. and Lu W.W., Three-dimensional nanocomposite scaffolds for bone tissue engineering: From design to application, Nano LIFE. Singapore, World Scientific, 2012, 2: 1250005 (14pp).

Researcher : Fan J

List of Research Outputs

Fan J., Heat Transport in Nanofluids and Biological Tissues, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-304.

Researcher : Fan Y

List of Research Outputs

Fan Y. and Cheung L.K., Co-author of Miss Yi Fan, Best Student Paper Awardee, The 2011 International Conference of Systems Biology and Bioengineering - Paper title: Computational Study on Obstructive leep Apnea Syndrome Using Patient-Specific Models. 2011.

Fan Y., Cheung L.K., Chong M.M., Chua H.D.P., Chow K.W. and Liu C.H., Computational fluid dynamics analysis on the upper airways of obstructive sleep apnea using patient = specific models, IAENG International Journal of Computer Science. 2011, 38:4: 10.

Fan Y. and Chow K.W., Computational studies of aneurysms and dissection, European Biomedical Engineering Conference, London, United Kingdom. 2011.

Fan Y., The Applications of Computational Fluid Dynamics to the Cardiovascular System and the Respiratory System, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-136.

Researcher : Fan Y

List of Research Outputs

Fan Y. and Chow K.W., Computational studies of aneurysms and dissection, European Biomedical Engineering Conference, London, United Kingdom. 2011.

Fan Y., The Applications of Computational Fluid Dynamics to the Cardiovascular System and the Respiratory System, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-136.

Researcher : Feng SPT

Project Title:	Multi-scale investigation of interface dominated multiferroic nanostructures (IDMNS) and exploration of potential applications
Investigator(s):	Feng SPT, Soh AK
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2012

Project Title:	Carbon nanotube paper as supercapacitor electrodes
Investigator(s):	Feng SPT, Leung YC
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	01/2012

Project Title:	141st TMS Annual Meeting & Exhibition (TMS 2012) Method of selective electroplating having strong adhesion and exceptional uniformity by nanoparticle immobilization
Investigator(s):	Feng SPT
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	03/2012
Completion Date:	03/2012

List of Research Outputs

Feng S.P.T., Guest editor for Special Issue on Metallurgy Materials for Energy Application, In: Chih-Ming Chen, Yee-wen Yen, Shien-Ping Feng, Tengfei Luo, Journal of Metallurgy. 2012.

Feng S.P.T., Invited Lecture: Method of Selective Electroplating having Strong Adhesion and Exceptional Uniformity by Nanoparticle Immobilization, Meeting: 2012 TMS Annual Meeting & Exhibition Symposium: Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials XI. 2012.

Feng S.P.T., Thermal Percolation in Stable Graphite Suspensions, Nanoletters. 2012, 12: 188-192.

Researcher : Feng Z

List of Research Outputs

Feng Z., Lam J. and Gao H., Delay-dependent robust H_¥ controller synthesis for discrete singular delay systems, International Journal of Robust and Nonlinear Control. 2011, 21(16): 1880-1902.

Feng Z. and Lam J., Integral partitioning approach to robust stabilization for uncertain distributed time delay systems, International Journal of Robust and Nonlinear Control. 2012, 22(6): 676-689.

Feng Z. and Lam J., Integral partitioning approach to stability analysis and stabilization of distributed time delay systems, Proceedings of the IFAC World Congress. 2011, 5094–5099.

Feng Z., Lam J. and Gao H., a-Dissipativity analysis and synthesis of singular time-delay systems, Automatica. 2011, 47(11): 2548-2552.

Zhan W., Cui Y., Feng Z., Lam J. and Gao H., Joint optimization approach to building vibration control via active tuned mass dampers, 14th Asia Pacific Vibration Conference (APVC). Hong Kong, 2011, 482-491.

Researcher : Fu X

List of Research Outputs

Fu X., Gu Q., Wang X.X., Leung Y.C., Chen S.F. and Huang H., Photocatalytic reforming of C₃-polyols for H₂ production: Part I: Role of their OH group, Applied Catalysis B: Environmental. UK, Elsevier, 2011, 106: 681-688.

Gu Q., Fu X., Wang X.X., Chen S.F., Leung Y.C. and Xie X.Q., Photocatalytic reforming of C₃-polyols for H₂ production Part II: FTIR study on the adsorption and photocatalytic reforming reaction of 2-propanol on Pt/TiO₂, Applied Catalysis B: Environmental. UK, Elsevier, 2011, 106: 689-696.

Leung Y.C., Fu X., Ye D.Q. and Huang H., Effect of the lattice oxygen mobility in Au/TiO₂ on formaldehyde oxidation, Kinetic and Catalysis. N.Y., USA, Springer, 2012, 53: 239-246.

Researcher : Gao X

List of Research Outputs

Gao X., Li Y., Xu P. and Cowling B.J., Evaluation of intervention strategies in schools including ventilation for influenza transmission control, Building Simulation. 2012, 5(1): 29:37.

Gao X., Relative Effectiveness of Ventilation in Community Indoor Environments for Controlling Infection, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-233.

Researcher : Han SJ

Project Title:	Intracellular degradation of a 3D collagen scaffold by human mesenchymal stem cells: its role in chondrogenic differentiation and new matrix synthesis
Investigator(s):	Han SJ, Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	01/2011

List of Research Outputs

Han S.J. and Chan B.P., Collagen scaffold remodeling by human mesenchymal stem cells and its role in stem cell differentiation., Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 20.

Han S.J. and Chan B.P., Collagen scaffold remodelling by human mesenchymal stem cells. , Days of Molecular Medicine 2011, "Re-engineering Regenerative Medicine" Symposium, 10-12 Nov, Hong Kong.. 2011, 82.

Wong Y.K., Han S.J., Chan C.H., Shum D.K.Y., Chan G.C.F. and Chan B.P., Characterization of human mesenchymal stem cells selected by collagen barrier., Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 182.

Researcher : Hang J

Project Title:	Quantifying the effect of building height variation on pollutant removal and heat removal from high-rise compact building arrays
Investigator(s):	Hang J, Li Y
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	01/2011
Completion Date:	06/2012

List of Research Outputs

Hang J. and Li Y., Age of air and air exchange efficiency in high-rise urban areas and its link to pollutant dilution. , Atmospheric Environment　. Elsevier Science, 2011, 45(31): 5572-5585.

Hang J., Li Y. and Sandberg M., Experimental and numerical studies of flows through and within high-rise building arrays and their link to ventilation strategy, Journal of Wind Engineering and Industrial Aerodynamics. 2011, 99(10): 1036-1055.

Hang J. and Li Y., Macroscopic simulations of turbulent flows through high-rise building arrays using a porous turbulence model, Building and Environment . 2012, 49: 41-54.

Hang J., Li Y., Sandberg M., Buccolieri R. and Disabatino S., The influence of building height variability on pollutant dispersion and pedestrian ventilation in idealized high-rise urban areas , Building and Environment. 2012, 56: 346-360.

Researcher : Ho FC

List of Research Outputs

Ho F.C. and Chan B.P., Effect of Cyclic Comperession on Cytoskeleton Network and Associated Molecules of Human Mesemchymal Stem Cells in Three Dimensional Collagen Environments (ID: 3850), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China. 2012, P-SAT-B-201.

Ho F.C. and Chan B.P., Effect of dynamic mechanical compression on actin cytoskeleton network of human mesenchymal stem cells in three dimensional collagen environments. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 74.

Researcher : Ho YK

List of Research Outputs

Ho Y.K. and Liu C.H., Wind tunnel measurement of turbulent boundary layer over hypothetical urban roughness elements, European Geosciences Union General Assembly 2012, April 22 to 27, 2012, Vienna, Austria. 2012.

Researcher : Hu B

List of Research Outputs

Hu B., Shenoy V.B. and Lin Y., Buckling and enforced stretching of bio-filaments, Journal of the Mechanics and Physics of Solids. 2012, 60.

Researcher : Hu Y

List of Research Outputs

Hu Y., Consensus Control of Multi-Agent Systems, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-145.

Researcher : Huang H

Project Title:	The 8th Asia Pacific Conference on Sustainable Energy & Environmental Technologies (APSCEET 2011) Removal of formaldehyde with a reduced Au/TiO2 catalyst at ambient temperature
Investigator(s):	Huang H
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	07/2011
Completion Date:	07/2011

List of Research Outputs

Fu X., Gu Q., Wang X.X., Leung Y.C., Chen S.F. and Huang H., Photocatalytic reforming of C₃-polyols for H₂ production: Part I: Role of their OH group, Applied Catalysis B: Environmental. UK, Elsevier, 2011, 106: 681-688.

Huang H. and Leung Y.C., A method for dyeing wastewater treatment, Chinese Petent. 2011.

Huang H., Ye D.Q., Leung Y.C. and Guan X.J., Abatement of toluene in the plasma-driven catalysis process: Mechanism and reaction kinetics, IEEE Transactions on Plasma Science. UK, IEEE, 2011, 39: 877-882.

Huang H., Kwong C.W., Aisyah L., Ashman P.J. and Leung Y.C., Chemical looping combustion of syngas with ceria-supported oxygen carriers, Proceedings of the Australian Combustion Symposium. University of Newcastle, 2011, Abstract: 1pp.

Huang H. and Leung Y.C., Enhanced photocatalytic degradation of methylene blue under vacuum ultraviolet irradiation, Catalysis Today. 2012, http://dx.doi.org/10.1016/j.cattod.2012.06.022.

Huang H. and Leung Y.C., Removal of formaldehyde with a reduced Au-TiO2 catalyst at ambient temperature, the 8th Asia Pacific Conference on Sustainable Energy & Environmental Technologies. 2011.

Huang H. and Leung Y.C., Vacuum ultraviolet-irradiated photocatalysis: advanced process for toluene abatement, Journal of Environmental Engineering. Reston, USA, ASCE, 2011, 137: 996-1001.

Leung Y.C., Fu X., Ye D.Q. and Huang H., Effect of the lattice oxygen mobility in Au/TiO₂ on formaldehyde oxidation, Kinetic and Catalysis. N.Y., USA, Springer, 2012, 53: 239-246.

Researcher : Huang L

Project Title:	The suppression of multiple tones for small axial-flow fans
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	12/2005

Project Title:	Blower noise source identification and mitigation for notebook PCs
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	Intel Corporation - General Award
Start Date:	05/2007

Project Title:	Exploring a new approach of ground noise control for the over-land supersonic transportation
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2009

Project Title:	Study of two prototype problems of confined noise sources
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2010

Project Title:	Development of an Environmentally Friendly Sound Absorption Panel for Broadband Noise Reduction Purpose
Investigator(s):	Huang L, Chan YJ
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Support Programme (Tier 3)
Start Date:	06/2011

Project Title:	Electromagnetic Absorption of Sound
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	18th International Congress on Sound and Vibration (ICSV 18) Propagation and absorption of sound with multiple radial modes in a circular duct
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	07/2011
Completion Date:	07/2011

Project Title:	Development of an Environmentally Friendly Sound Absorption Panel for Broadband Noise Reduction Purpose
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2011

List of Research Outputs

Chan Y.J., Huang L. and Lam J., Constraints of ideal broadband noise cancellation in feedforward active noise control systems, Inter-noise 2011.

Cheung S.C., Wang C. and Huang L., Numerical study on scattering and absorption by periodically arranged acoustical treatment at oblique incidence., Acoustics Hong Kong 2012, 13-18 May 2012 (abstract book published as a special issue of Journal of the Acoustical Society of America). 2012, 131(4), Pt. 2: 3300-3300.

Ffowcs Williams J... .E... and Huang L., Control of weak perturbations, Acoustics 2012 Hong Kong, 13-18 May 20122 (abstract book published as a special issue of Journal of the Acoustical Society of America). 2012, 131(4), Pt.2: 3430-3430.

Ffowcs Williams J.E. and Huang L., Plenary keynote speech: Aeroacoustics, 18th International Congress on Sound and Vibration, 10-14 July 2011, Rio de Janeiro. 2011.

Huang L., Aircraft engine as a high-order loudspeaker?, The 9th International Symposium on Modern Acoustics, organized by Nanjing University, 20-22 May 2012. 2012, Paper AA01: 20-20.

Huang L., Outstanding achievement in obtaining national ("973") project award for the Shenzhen Virtual University Park, 2011, 2011年度深圳虛擬大學園獲得國家級科技項目獎先進個人, Dept of Science, Technology and Commerce, Shenzhen Government. 2011.

Huang L., Propagation and absorption of sound with multiple radial modes in a circular duct, In: Ricardo E. Musafir, 18th International Congress on Sound and Vibration. Rio de Janeiro, Brazil, International Institute of Acoustics and Vibration, 2011, 1: 1-8.

Mace B.R. and Huang L., A WAVE SOLUTION FOR SOUND ATTENUATION IN A RIGID-WALLED DUCT WITH A FLEXIBLE SIDE PANEL, In: Ricardo E. Musafir, 18th International Congress on Sound and Vibration. Rio de Janeiro, Brazil, International Institute of Acoustics and Vibration, 2011, 1: 1-8.

Wang C. and Huang L., On the acoustic properties of parallel arrangement of multiple micro-perforated panel absorbers with different cavity depths, Journal of the Acoustical Society of America. Acoustical Society of America, 2011, 130: 208-218.

Researcher : Huang M

Project Title:	The nucleation mechanism of nano-sized twins in Twinning Induced Plasticity (TWIP) steels
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	10/2010
Completion Date:	04/2012

Project Title:	Ultrahigh strength Twinning Induced Plasticity (TWIP) steels strengthened by ultrafine-grained structure and intermetallic nanoprecipitates
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	THERMEC'2011 Conference Strain Induced by Recrystallization in Steels
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	08/2011
Completion Date:	08/2011

Project Title:	Theoretical and Experimental Investigations on a Recently Discovered Phenomenon in Metals and Alloys: Recrystallization Induced Plasticity (RIP)
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	France/Hong Kong Joint Research Scheme - Travel Grants
Start Date:	01/2012

Project Title:	Stability of individual austenite grains in the advanced TRIP steels
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2012

List of Research Outputs

Huang M., A new model based on irreversible thermodynamics to predict dislocation density, Plasticity 12, San Juan, USA. 2012.

Huang M., Martensitic transformation in an individual retained austenite, 7th International Conference on Advanced Materials Processing, Taipei. 2012.

Huang M., Member of Editorial Board, American Journal of Materials Science. Scientific & Academic Publishing, 2011.

Huang M., Bouaziz O. and van der Zwaag S., Modelling the strongest grain size in nanocrystalline FCC metals, Materials Letters. Elsvier, 2011, 65: 3128.

Huang M., Bouaziz O., Barbier D. and Allain S., On the Mechanisms Determining the Work Hardening Behaviour of Twinning Induced Plasticity Steels, 12th Annual Meeting of International Union of Materials Research Societies (IUMRS) - International Conference in Asia (ICA), Taipei. 2011.

Huang M., Pineau P., Bouaziz O. and Vu T.D., Recrystallization induced plasticity in austenite and ferrite, Materials Science and Engineering: A. 2012, 541: 196-198.

Rivera-Díaz-del-Castillo P.E.J. and Huang M., Dislocation annihilation in plastic deformation: I. Multiscale irreversible thermodynamics, Acta Materialia. 2012, 60: 2606-2614.

Saimoto S. and Huang M., New Constitutive Analysis of Microstructural Evolution: Hot Compression of Gamma Iron, Materials Science Forum. 2012, 706-709: 2284-2289.

Yen Y.W., Huang M., Scott C.P. and Yang J.R., Interactions between deformation-induced defects and carbides in a vanadium-containing TWIP steel, Scripta Materialia. 2012, 66: 1018-1023.

Researcher : Hui SCM

List of Research Outputs

Hui S.C.M. and Chan K.L., Biodiversity assessment of green roofs for green building design, Proceedings of Joint Symposium 2011: Integrated Building Design in the New Era of Sustainability, 22 November 2011 (Tue), Kowloon Shangri-la Hotel, Tsim Sha Tsui East, Kowloon, Hong Kong. Hong Kong, ASHRAE-HKC/CIBSE-HKB/HKIE-BSD, 2011, 10.1-10.8.

Hui S.C.M., Building energy efficiency in Hong Kong: How high we can go?, HKIE Environmental Division Technical Seminar, 3 Feb 2012 (Fri), HKIE Headquarters. Hong Kong, 2012.

Hui S.C.M., Building energy efficiency, 建築物能源效益, In: Fok, W. T. 主編：霍偉棟, Clean Energy and Environment: Combating Climate Change by Hong Kong Researchers and Professionals. 潔淨能源與環境: 港大學者為改善環境分享專業知識, Hong Kong, Faculty of Engg. & Initiative on Clean Energy & Envir., HKU, 2011, Chapter 9: 122-137.

Hui S.C.M., Design of high performance green buildings: opportunities and challenges, ASHRAE-HKC / MARCC Joint Technical Seminar, 5 Dec 2011, Macao Science Center. Macau, 2011.

Hui S.C.M., Energy efficient buildings has a bright future, 節能建築大有可為, In: Hung, Y. S., et al. 主編：洪仰三、霍偉棟、徐力、劉暢, Engineering, New Knowledge and Exchange: Knowledge Exchange of HKU Engineering Technologies. 工程·新知·交流: 香港大學工程科技知識交流, Hong Kong, Faculty of Engineering, The University of Hong Kong, 2012, 8-12.

Hui S.C.M., Enhancing crime prevention via the scope of Building Services Engineering, Invited presentation at the Hong Kong Police Force Crime Prevention Bureau: Advanced Crime Prevention Training Day, 20 Dec 2011 (Tue), Wanchai, Hong Kong. Hong Kong, 2011.

Hui S.C.M. and Chan S.C., Exergy analysis of cooling towers for optimization of HVAC systems, Proceedings of Joint Symposium 2011: Integrated Building Design in the New Era of Sustainability, 22 November 2011 (Tue), Kowloon Shangri-la Hotel, Tsim Sha Tsui East, Kowloon, Hong Kong. Hong Kong, ASHRAE-HKC/CIBSE-HKB/HKIE-BSD, 2011, p.1.1-1.10.

Hui S.C.M. and Wong H.Y.K., Exergy analysis of cooling towers for optimization of HVAC systems, 冷卻塔的火用分析應用在暖通空調系統的優化, Proceedings of the Hunan-Hong Kong Joint Symposium 2011, 1-2 July 2011, Changsha, Hunan, China. Changsha, Hunan, China, Conference organisers, 2011, 41-51.

Hui S.C.M., Green buildings begin with green hats, 環保建築綠帽罩大屋, In: Hung, Y. S., et al. 主編：洪仰三、霍偉棟、徐力、劉暢, Engineering, New Knowledge and Exchange: Knowledge Exchange of HKU Engineering Technologies. 工程·新知·交流: 香港大學工程科技知識交流, Hong Kong, Faculty of Engineering, The University of Hong Kong, 2012, 4-7.

Hui S.C.M., Green roof farming for buildings in urban cities, 探討城市建築的屋頂綠化及農業, Proceedings of the 2011 9th Guangdong-Hong Kong-Macau-Taiwan (GHMT) Engineers Forum, 17-19 November 2011, Guangzhou, China. 《2011年第9屆兩岸四地工程師(廣州)論壇論文集》，2011年11月 17-19日，中國廣州, Guangzhou, China, Confernce organiser, 2011, 51-55.

Hui S.C.M. and Wong S.L., Study of heat stress and thermal environment in construction sites, 在建築地盤的熱應力和熱環境之研究, Proceedings of the Hunan-Hong Kong Joint Symposium 2011,1-2 July 2011, Changsha, Hunan, China. Changsha, Hunan, China, Conference organisers, 2011, 52-61.

Hui S.C.M. and Leung J.Y.C., Thermal comfort and energy performance of chilled ceiling systems, Proceedings of the Fujian-Hong Kong Joint Symposium 2012, 29-30 June 2012, Fuzhou, China. Fuzhou, China, Conference organiser, 2012, 36-48.

Researcher : Hui TH

List of Research Outputs

Hui T.H., Rock R., Leung C.W. and Pong P.W.T., Modelling of Graphite Superlattices with Radius-Optimized Area-Averaging Method, International Symposium on Integrated Functionalities. Hong Kong, 2012, P411.

Researcher : Ip RWL

Project Title:	Axial-fugal Flow Turbo-machines: A New Family Group of Airflow Machines for Specific Industrial Applications
Investigator(s):	Ip RWL
Department:	Mechanical Engg
Source(s) of Funding:	Matching Grant for Joint Research
Start Date:	03/2010
Completion Date:	02/2012

List of Research Outputs

Ip R.W.L. and Ip P.W.H., A new digital audio system design to cope with high audio scene (has) encoding technology for all round applications, In: Wan Wanggen, Luo FaLong and Yu Xiaoqing, Proceedings of International Conference on Audio, Language and Image Processing. Shinghai, China, Institute of Electrical and Electronic Engineers, Inc., 2012, 1: 175 - 181.

Ip R.W.L. and Wan I.C., Development of nonlinear analytical models for the study of heat/mass transfer properties in the drying of porous type fabric, Defect and Diffusion Forum, Diffusion in Solids and Liquids VII. Switzerland, Trans Tech Publications, 2012, 326 - 328: 593 - 598.

Researcher : Kang J

List of Research Outputs

Zhang X., Wang M., Yuan X.Y. and Kang J., A comparative study on conventional electrospinning and emulsion electrospinning of PLLA nanofibers, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011, 1pp.

Zhang X., Wang M., Yuan X.Y. and Kang J., A comparative study on conventional electrospinning and emulsion electrospinning of PLLA nanofibers, Advanced Materials Research. Switzerland, Trans Tech Publications, 2012, 410: 390-393.

Zhang X., Wang C., Kang J. and Wang M., Morphological and structural control of electrospun PLLA nanofibers: Influence of electrospinning techniques and parameters, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Researcher : Kou X

Project Title:	Doris Zimmern HKU-Cambridge Hughes Hall Fellowships 2010-11
Investigator(s):	Kou X
Department:	Mechanical Engg
Source(s) of Funding:	Doris Zimmern HKU-Cambridge Hughes Hall Fellowships
Start Date:	09/2010

Researcher : Kwok WL

List of Research Outputs

Kwok W.L., Chan K.W., Leung H.B., Wong K. and Hu Y., Application of SEMG for assessing the effectiveness of wearing soft lumbar corsets in elderly patients with low back pain, SpineWeek 2012, Amsterdam, 28 May-1 June, 2012 . 2012, P337.

Researcher : Lai SK

List of Research Outputs

Lai S.K., Harrington J., Xiang Y. and Chow K.W., Accurate analytical perturbation approach for large amplitude vibration of functionally graded beams, International Journal of Non-Linear Mechanics. 2012, 47: 473-480.

Lai S.K. and Chow K.W., Exact solutions for oscillators with quadratic damping and mixed-parity nonlinearity, Physica Scripta. UK and USA, The Royal Swedish Academy of Sciences, 2012, 85: 045006 (6pp).

Researcher : Lam HN

Project Title:	GIS -based Intelligent Management of Building Facilities and Security System
Investigator(s):	Lam HN
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	11/2007

Project Title:	Powerline-based Smart Energy System for User Decision Support and Energy Saving
Investigator(s):	Lam HN
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	12/2009
Completion Date:	04/2012

Project Title:	Integrating geothermal heat pump with novel liquid desiccant dehumidification for environmentally friendly air conditioning design in sub-tropical regions
Investigator(s):	Lam HN
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	12/2010

Project Title:	Far Infrared Heating System for Liquid-Desiccant-Based Air Dehumidification
Investigator(s):	Lam HN
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	02/2011

Project Title:	Building energy pile and low-temperature distillation for novel integration of energy-efficient air conditioning and high-quality drinking water
Investigator(s):	Lam HN
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	Building Simulation 2011 APPLICATION POTENTIAL OF GROUND-SOURCE HEAT PUMPS FOR MULTI-STOREY OFFICE BUILDINGS IN HONG KONG
Investigator(s):	Lam HN
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	11/2011
Completion Date:	11/2011

List of Research Outputs

Lam H.N., Heating Applications of FIR Technology: Design Considerations and Product Certification, Workshop on Far Infrared Radiation Technology for Heating Applications and Its Business Opportunities. 2012.

Lee C.K. and Lam H.N., Application Potential of Ground-coupled Heat Pumps for Multi-storey Office Buildings in Hong Kong, Building Simulation 2011, 12th Conference of International Building Performance Simulation Association . 2011, 64-69.

Lee C.K. and Lam H.N., Determination of Groundwater Direction in Thermal Response Test Analysis, HVAC&R Research. 2011, 17(6).

Researcher : Lam J

Project Title:	Outstanding Researcher Award 2007-2008
Investigator(s):	Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Outstanding Researcher Award
Start Date:	10/2008

Project Title:	Robust Synthesis of Quantum Systems
Investigator(s):	Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	01/2009

Project Title:	Dissipativity Analysis and Related Reduced-Order Synthesis for Stochastic Delay Systems
Investigator(s):	Lam J
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	11/2009
Completion Date:	04/2012

Project Title:	Design of Distributed Filters for Multi-agent Systems
Investigator(s):	Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	01/2010
Completion Date:	12/2011

Project Title:	Iterative Solutions to Linear Matrix Equations Arising from Control Theory
Investigator(s):	Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	01/2011

Project Title:	Control Synthesis and Approximation of Jump Systems with Uncertain Transitions and Positive Characteristics
Investigator(s):	Lam J
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2011

Project Title:	Synthesis for Constrained Functional Differential Systems under Limited Capacity and Imperfect Measurement
Investigator(s):	Lam J
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2012

Project Title:	Output Tracking Control for Time-delay Systems with Random Abrupt Changes
Investigator(s):	Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	06/2012

List of Research Outputs

Chan Y.J., Huang L. and Lam J., Constraints of ideal broadband noise cancellation in feedforward active noise control systems, Inter-noise 2011.

Chen X., Lam J., Li P. and Shu Z., Controller synthesis for positive systems under `1-induced performance, 24th Chinese Control and Decision Conference. Taiyuan, China, 2012, 92-97.

Dong H., Lam J. and Gao H., Distributed H_¥ filtering for repeated scalar nonlinear systems with random packet losses in sensor networks, International Journal of Systems Science. 2011, 42(9): 1507-1519.

Dong H., Wang Z., Lam J. and Gao H., Fuzzy-model-based robust fault detection with stochastic mixed tme-delays and successive packet dropouts, IEEE Transactions on Systems, Man, and Cybernetics (B). 2012, 42(2): 365-376.

Du B., Lam J. and Shu Z., H_¥ and passivity control via static and integral output feedback for systems with input delay, Journal of Dynamic Systems, Measurement, and Control. 2012, 134(2): Article No. 021004.

Feng Z., Lam J. and Gao H., Delay-dependent robust H_¥ controller synthesis for discrete singular delay systems, International Journal of Robust and Nonlinear Control. 2011, 21(16): 1880-1902.

Feng Z. and Lam J., Integral partitioning approach to robust stabilization for uncertain distributed time delay systems, International Journal of Robust and Nonlinear Control. 2012, 22(6): 676-689.

Feng Z. and Lam J., Integral partitioning approach to stability analysis and stabilization of distributed time delay systems, Proceedings of the IFAC World Congress. 2011, 5094–5099.

Feng Z., Lam J. and Gao H., a-Dissipativity analysis and synthesis of singular time-delay systems, Automatica. 2011, 47(11): 2548-2552.

Lam J., $\ell$_1-induced Norm and Controller Synthesis of Positive Systems, King’s College, London. 2012.

Lam J., Associate Editor , International Journal of Applied Mathematics and Computer Science. 2012.

Lam J., Associate Editor, Asian Journal of Control. 2012.

Lam J., Associate Editor, Automatica. 2011.

Lam J., Associate Editor, Conference Editorial Board of IEEE Control Systems Society. 2012.

Lam J., Associate Editor, Dynamics of Continuous, Discrete, and Impulsive Systems – Series B. 2011.

Lam J., Associate Editor, International Journal for Information and Systems Sciences. 2012.

Lam J., Associate Editor, International Journal of Systems Science. 2012.

Lam J., Associate Editor, Journal of The Franklin Institute. 2012.

Lam J., Chair Professor, East China University of Science and Technology. 2011.

Lam J., Editoral Member, Journal of Electrical and Computer Engineering. 2011.

Lam J., Fixed Order Multi-Objective Synthesis: A System Augmentation Framework, Harbin Institute of Technology. 2011.

Lam J., H∞ Filtering of Polynomial Systems, Hangzhou Dianzi University. 2012.

Lam J., H∞ Filtering of Polynomial Systems, Nanjing University of Science and Technology. 2011.

Lam J., IET Control Theory and Applications, Editor-in-Chief, 2012.

Lam J., Member of Editorial Advisory Board, Central European Journal of Engineering. 2012.

Lam J., Member of Editorial Board , International Journal of Sensors, Wireless Communications and Control. 2012.

Lam J., Member of Editorial Board, Central European Journal of Engineering. 2012.

Lam J., Member of Editorial Board, International Journal of Systems, Control and Communications. 2011.

Lam J., Member of Editorial Board, Multidimensional Systems and Signal Processing. 2012.

Lam J., Member of Editorial Board, Proc. IMechE Part I: Journal of Systems and Control Engineering. 2011.

Lam J., Member of Editorial Board, The Open Automation and Control Journal. 2012.

Lam J., Member of Editorial Board, The Open Electrical and Electronic Journal. 2012.

Lam J., Positive Systems and Filtering Under Positivity Constraints, Jiangsu University of Science and Technology. 2011.

Lam J., Positive Systems and Filtering Under Positivity Constraints, University of Science and Technology, China. 2012.

Lam J., Positive Systems and Positivity-Preserving H∞ Model Reduction, Hunan University. 2011.

Lam J., Subject Editor, Journal of Sound and Vibration. 2012.

Lam J., Systems, Member of Editorial Board, 2012.

Lam J., Transient and Steady-State Estimates of Interval Genetic Regulatory Networks, East China University of Science and Technology. 2011.

Lam J., Visiting Guest Professor, University of Agder. 2012.

Lam J., Visiting Professor, King's College London. 2012.

Li P., Lam J. and Chesi G., On the Synthesis of Linear H-infinity Filters for Polynomial Systems, Systems and Control Letters. 2012, 61: 31-36.

Li P., Lam J. and Chesi G., On the synthesis of linear H_¥ filters for polynomial systems, Systems and Control Letters. 2012, 61(1): 31-36.

Li P., Lam J., Wang Z. and Date P., Positivity-preserving H_¥ model reduction for positive systems, Automatica. 2011, 47(7): 1504-1511.

Li P. and Lam J., Synchronization in networks of genetic oscillators with delayed coupling, Asian Journal of Control. 2011, 13(5): 713-725.

Li Z.Y., Zhou B., Lam J. and Wang Y., Positive operator based Iterative algorithms for solving lyapunov equations for ito stochastic systems with markovian jumps, Applied Mathematics and Computation. 2011, 217(21): 8179-8195.

Liang J., Shen B., Dong H. and Lam J., Robust distributed state estimation for sensor networks with stochastic communication delays, International Journal of Systems Science. 2011, 42(9): 1459-1471.

Liu X. and Lam J., Stability analysis of discrete-dime positive switched linear delay systems, American Control Conference. Montreal, Canada, 2012, 5444-5449.

Simone S., Li P. and Lam J., Design of structured dynamic output feedback controllers for interconnected systems, International Journal of Control. 2011, 84(12): 2081-2091.

Sun M., Lam J., Shu Z. and Xu S., Optimal time-weighted H2 model reduction for markovian jump systems, International Journal of Control. 2012, 85(6): 613-6-28.

Wang Q., Du B., Lam J. and Chen M.Z., Stability analysis of Markovian jump systems with multiple delay components and polytopic uncertainties, Circuits, Systems, and Signal Processing. 2012, 31: 143-162.

Wu Z., Lam J., Su H. and Chu J., Stability and dissipativity analysis of static neural networks with time-delay, IEEE Transactions on Neural Networks. 2012, 23(2): 199-210.

Yu R., Ho K.Y.G., Pong M.H., Ling B. and Lam J., Computer Aided Design and Optimization of High Efficiency LLC Resonant Converter, IEEE Transactions on Power Electronics. 2011, 27: 3243-3256.

Zhan W., Cui Y., Feng Z., Lam J. and Gao H., Joint optimization approach to building vibration control via active tuned mass dampers, 14th Asia Pacific Vibration Conference (APVC). Hong Kong, 2011, 482-491.

Zhou B., Lin Z. and Lam J., Semi-global stabilization of linear time delay system with energy constraint, Automatica. 2012, 48(4): 694-698.

Zhou B., Lin Z. and Lam J., Semi-global stabilization of linear time-delay systems with energy constraints, Proceedings of the IFAC World Congres. 2011, 5106–5111.

Zhou B., Lam J. and Duan G.R., Toward solution of matrix equation X=Am(X)B+C, Linear Algebra and Its Applications. 2011, 435(6): 1370-1398.

Researcher : Lee CK

List of Research Outputs

Lee C.K. and Lam H.N., Application Potential of Ground-coupled Heat Pumps for Multi-storey Office Buildings in Hong Kong, Building Simulation 2011, 12th Conference of International Building Performance Simulation Association . 2011, 64-69.

Lee C.K. and Lam H.N., Determination of Groundwater Direction in Thermal Response Test Analysis, HVAC&R Research. 2011, 17(6).

Researcher : Lee HY

List of Research Outputs

Lee H.Y., Integrated Intelligent Management Platform for the Built Environment Incorporating Agent-Based Simulation and Geographic Information System, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-242.

Researcher : Lee WC

List of Research Outputs

Gong C., Lee W.C. and Wang M., Forming bioactive apatite coating on anodically oxidized NiTi shape memory alloy through electrochemical deposition, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Gong C., Lee W.C. and Wang M., Titanium dioxide layer on NiTi shape memory alloy through anodic oxidation: Fabrication and characteristics, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Lee W.C. and Wang M., Antibiotics-incorporated apatite and apatite/collagen catings on NiTi shape memory alloy formed by electrochemical deposition, 36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’12). Daytona Beach, FL, USA, 2012, 1pp.

Lee W.C. and Wang M., Antibiotics-incorporated apatite and apatite/collagen coatings on NiTi shape memory alloy formed by electrochemical deposition, Proceedings of the 36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’12). Daytona Beach, FL, USA, 2012, 1pp.

Lee W.C. and Wang M., Apatite coating and apatite/collagen composite coating on NiTi shape memory alloy formed through electrochemical deposition: A comparative study, Proceedings of the 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Lee W.C., Functional Coatings on Ti-6Al-4V and NiTi Shape Memory Alloy for Medical Applications, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-239.

Lee W.C. and Wang M., Incorporation and in vitro release of antibiotics from apatite coatings produced by electrochemical deposition on NiTi shape memory alloy, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Lee W.C. and Wang M., Synthesis of antibiotics-loaded apatite/collagen composite coatings on NiTi shape memory alloy and in vitro release behaviours of antibiotics, Proceedings of the 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Sun T., Lee W.C. and Wang M., A comparative study of apatite coating and apatite/collagen composite coating fabricated on NiTi SMA through electrochemical deposition, Materials Letters. The Netherlands, Elsevier, 2011, 65: 2575-2577.

Sun T., Wang M. and Lee W.C., Surface characteristics, properties and in vitro biological assessment of a NiTi shape memory alloy after high temperature heat treatment or surface H2O2-oxidation: A comparative study, Materials Chemistry and Physics. The Netherlands, Elsevier, 2011, 130: 45-58.

Researcher : Leung KK

List of Research Outputs

Leung K.K. and Liu C.H., Laboratory measurements of local mass transfer velocity over idealized 2D urban streets, The Sixth International Conference on Fluid Mechanics (ICFM6), June 30 to July 3, 2011, Guangzhou, China. 2011.

Leung K.K. and Liu C.H., Local mass transfer velocity over idealized 2D urban street models , International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Leung K.K. and Liu C.H., Measurements of local mass transfer coefficients over idealized 2D urban street canyons , 13th International Conference on Wind Engineering (ICWE13), July 10 to 15, 2011, Amsterdam, The Netherlands. 2011.

Leung K.K. and Liu C.H., On the Spatial Behaviors of Local Mass Transfer Coefficients Over Idealized Two-Dimensional Urban Street Canyons, HARMO14 - 14th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes, October 2 to 6, 2011, Kos Island, Greece. 2011.

Leung K.K. and Liu C.H., On the aerodynamic characteristics over idealized two-dimensional urban street canyon models, European Geosciences Union General Assembly 2012, April 22 to 27, 2012, Vienna, Austria. 2012.

Leung K.K., Wong C.C., Liu C.H., Ng G.C.T. and Lo J.C.Y., On the spatial behaviors of local mass transfer coefficients over idealized two-dimensional urban street canyons, Croucher Advanced Study Institute 2011-2012, Urban Climatology for Tropical and Sub-Tropical Regions, December 5 to 10, 2011, School of Architecture, The Chinese University of Hong Kong, Hong Kong. 2011.

Leung K.K. and Liu C.H., On the study of ventilation and pollutant removal over idealized two-dimensional urban street canyons, Building Simulation: an International Journal. 2012.

Liu C.H., Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hong Kong Electric Co. Ltd., 2012.

Liu C.H., Cheng W.C., Chung N.H., Wong C.C. and Leung K.K., On the Mechanism of Pollutant Removal from Two-Dimensional Idealized Urban Street Canyons, International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hong Kong Electric Co. Ltd., 2012.

Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hongkong Electric Co. Ltd., 2012.

Researcher : Leung KK

List of Research Outputs

Leung K.K. and Liu C.H., On the study of ventilation and pollutant removal over idealized two-dimensional urban street canyons, Building Simulation: an International Journal. 2012.

Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hong Kong Electric Co. Ltd., 2012.

Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hongkong Electric Co. Ltd., 2012.

Researcher : Leung MKH

Project Title:	Indoor air quality control and mitigation measures for printing plants
Investigator(s):	Leung MKH
Department:	Mechanical Engg
Source(s) of Funding:	Occupational Safety and Health Council - Research Grant Projects
Start Date:	03/2003

Project Title:	Local exhaust ventilation for protection against nosocomial infection of SARS
Investigator(s):	Leung MKH
Department:	Mechanical Engg
Source(s) of Funding:	VCO SARS Research Fund
Start Date:	07/2003

Project Title:	Environmental friendly cold water thawing for catering industry
Investigator(s):	Leung MKH
Department:	Mechanical Engg
Source(s) of Funding:	Environmental Research, Technology Demonstration Projects
Start Date:	07/2003

Project Title:	Novel local exhaust ventilation device for printing industry
Investigator(s):	Leung MKH
Department:	Mechanical Engg
Source(s) of Funding:	The OSH Enhancement Scheme for SMEs
Start Date:	10/2004

Project Title:	Domestic Single-Phase Heat Pump Water Heater and Air Conditioner
Investigator(s):	Leung MKH, Leung YC
Department:	Mechanical Engg
Source(s) of Funding:	CLP Power Hong Kong Ltd. - General Award
Start Date:	08/2007

Project Title:	Enhancement of integrated heat pumps for energy savings in hot water and air-conditioning at home
Investigator(s):	Leung MKH, Leung YC, Liu CH
Department:	Mechanical Engg
Source(s) of Funding:	Environment and Conservation Fund
Start Date:	06/2008

Project Title:	Study of manifold airflow dynamics and NOx formation mechanisms in solar gas turbine for performance enhancement
Investigator(s):	Leung MKH
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	12/2008

Project Title:	TiO2-WO3 nanotube array coated on glass substrate for enhanced photoelectrocatalysis
Investigator(s):	Leung MKH
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2010

Project Title:	Enhancement of solar photocatalysis by visible-light nanotube-array photocatalyst for environmental applications
Investigator(s):	Leung MKH
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2010
Completion Date:	08/2011

List of Research Outputs

Zhang Y., Mo J., Li Y., Sundell J., Wargocki P., Zhang J., Little J.C., Corsi R., Deng Q., Leung M.K.H., Fang L., Chen W., Li J. and Sun Y., Can commonly-used fan-driven air cleaning technologies improve indoor air quality? A literature review, Atmospheric Environment. 2011, 45: 4329-4343.

Researcher : Leung YC

Project Title:	Production of biodiesel fuel using grease trap waste oil
Investigator(s):	Leung YC
Department:	Mechanical Engg
Source(s) of Funding:	Dynamic Progress International Ltd. - General Award
Start Date:	08/2005

Project Title:	Photocatalytic production of clean and renewable hydrogen fuel
Investigator(s):	Leung YC, Leung MKH
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2006

Project Title:	Hong Kong Biogenic VOCs emission study
Investigator(s):	Leung YC, Liu CH
Department:	Mechanical Engg
Source(s) of Funding:	Environment Protection Department - General Award
Start Date:	07/2007

Project Title:	Study on the use of wet scrubber for cleaning the exhaust gas from ferry
Investigator(s):	Leung YC
Department:	Mechanical Engg
Source(s) of Funding:	Urban and Environmental Studies - General Award
Start Date:	11/2007

Project Title:	Experimental Study of Membraneless Microfluidic Fuel Cells
Investigator(s):	Leung YC
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	03/2011
Completion Date:	05/2012

Project Title:	The 8th Asia Pacific Conference on Sustainable Energy & Environmental Technologies (APCSEET 2011) Aluminum and its alloy: is it a sustainable and feasible energy carrier?
Investigator(s):	Leung YC
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	07/2011
Completion Date:	07/2011

Project Title:	Effective Nuclear Safety Governance for Hong Kong and Guangdong China: A Stakeholder Trust-based Model
Investigator(s):	Leung YC, Cheung KP, Fok WWT, Lam JCK, Leung JKC, Yeung DWC, Hills PR
Department:	Mechanical Engg
Source(s) of Funding:	Strategic Public Policy Research
Start Date:	01/2012

Project Title:	Development of an innovative paper-made fuel cell
Investigator(s):	Leung YC, Xuan J
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Applied Research
Start Date:	06/2012

Project Title:	Photoionized-catalysis process for efficient treatment of dyeing wastewater
Investigator(s):	Leung YC, Huang H
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	06/2012

List of Research Outputs

Chau H.F., Wong C.M., Ng T.K., Leung Y.C., Leung M.K.H. and Yu K.W., Book, Physics: Study Guide for HKDSEE. Hong Kong, Manhatten Press, 2011, 140pp.

Fu X., Gu Q., Wang X.X., Leung Y.C., Chen S.F. and Huang H., Photocatalytic reforming of C₃-polyols for H₂ production: Part I: Role of their OH group, Applied Catalysis B: Environmental. UK, Elsevier, 2011, 106: 681-688.

Gu Q., Fu X., Wang X.X., Chen S.F., Leung Y.C. and Xie X.Q., Photocatalytic reforming of C₃-polyols for H₂ production Part II: FTIR study on the adsorption and photocatalytic reforming reaction of 2-propanol on Pt/TiO₂, Applied Catalysis B: Environmental. UK, Elsevier, 2011, 106: 689-696.

Huang H. and Leung Y.C., A method for dyeing wastewater treatment, Chinese Petent. 2011.

Huang H., Ye D.Q., Leung Y.C. and Guan X.J., Abatement of toluene in the plasma-driven catalysis process: Mechanism and reaction kinetics, IEEE Transactions on Plasma Science. UK, IEEE, 2011, 39: 877-882.

Huang H., Kwong C.W., Aisyah L., Ashman P.J. and Leung Y.C., Chemical looping combustion of syngas with ceria-supported oxygen carriers, Proceedings of the Australian Combustion Symposium. University of Newcastle, 2011, Abstract: 1pp.

Huang H. and Leung Y.C., Enhanced photocatalytic degradation of methylene blue under vacuum ultraviolet irradiation, Catalysis Today. 2012, http://dx.doi.org/10.1016/j.cattod.2012.06.022.

Huang H. and Leung Y.C., Removal of formaldehyde with a reduced Au-TiO2 catalyst at ambient temperature, the 8th Asia Pacific Conference on Sustainable Energy & Environmental Technologies. 2011.

Huang H. and Leung Y.C., Vacuum ultraviolet-irradiated photocatalysis: advanced process for toluene abatement, Journal of Environmental Engineering. Reston, USA, ASCE, 2011, 137: 996-1001.

Leung Y.C., Wu X. and Leung M.H.K., 2011 Research output Prize in Mechanical Engineering for the paper "A review on biodiesel production using catalyzed transesterification", HKU Faculty of Engineering. 2011.

Leung Y.C. and Wang H., Aluminum and its alloy: is it a sustainable and feasible energy carrier?, 8th APCSEET 2011. Adelaide, Australia, Abstract book.

Leung Y.C., Clean energy and CCS technology: challenges and opportunity in China, China Energy Issues in the 12th 5-year Plan and Beyond Conference. Singapore, ESI; National University of Singapore, 2012, abstract: 1pp.

Leung Y.C., Editor, Sustainable Energy (SE). 2011.

Leung Y.C., Fu X., Ye D.Q. and Huang H., Effect of the lattice oxygen mobility in Au/TiO₂ on formaldehyde oxidation, Kinetic and Catalysis. N.Y., USA, Springer, 2012, 53: 239-246.

Leung Y.C., LPG in Asia: Lessons from Hong Kong, LPG Summit 2011. Manila, Philippines, 2011, Abstract: 1pp.

Leung Y.C., Yang H. and Yan J., Novel studies on hydrogen, fuel cell and battery energy systems, International Journal of Energy Research. USA, Wiley, 2011, 35: 1pp.

Leung Y.C., Deng Y. and Leung M.K.H., Parametric study of a fan-bladed microwind turbine, Journal of Power and Energy. UK, IMechE, 2011, 225: 1120-1131.

Leung Y.C., Potential of aluminum and its alloys to be a sustainable energy carrier for electrochemical energy conversion, Symposium on Research Highlights in Materials, Devices and Mechanism. The University of Hong Kong, 2011, Abstract: 1pp.

Leung Y.C. and Yang Y., Wind energy development and its environmental impact: a review, Renewable & Sustainable Energy Reviews. UK, Elsevier, 2012, 16: 1031-1039.

Leung Y.C., Wind power development and its environmental impacts, Conference on New & Renewable Energy Development Cum Cross-strait Scientists Form on Energy Efficiency & Management. Open University of Hong Kong, 2011, Abstract: 1pp.

Leung Y.C., Leung M.K.H., Gambarota L. and Deng Y., 為城市環境設計之微型風力發電機系統, 潔淨能源與環境. Hong Kong, The University of Hong Kong, 2012, 57-66.

Niu H. and Leung Y.C., Modelling of a bacterial bioreactor for nitric oxide abatement, 8th APCSEET 2011. Adelaide, Australia, Abstract book.

Rizwan A.M. and Leung Y.C., On the heating environment in street canyon, Environmental Fluid Mechanics. Netherlands, Springer Verlag, 2011, 11: 465-480.

Wang H., Leung Y.C. and Leung M.K.H., Energy analysis of hydrogen and electricity production from aluminum-based processes, Applied Energy. UK, Elsevier, 2012, 90: 100-105.

Wang H., Leung Y.C. and Xuan J., Modeling of a micro auto-electrolytic cell for hydrogen production, International Journal of Hydrogen Energy. 2012, 37: 10002-10009.

Wang H., Leung Y.C. and Xuan J., Modeling of a microfludic electrochemical cell for CO₂ utilization, Proceedings of the Advanced Electrochemical Energy Symposum AEES. 2011, Abstract: 1pp.

Wang H., Leung Y.C. and Xuan J., Modeling of an air cathode for microfluidic fuel cells: Transport and polarization behaviors, International Journal of Hydrogen Energy. 2011, 36: 14704-14718.

Wu X. and Leung Y.C., Biodiesel production from camelina oil: Process optimization using orthogonal experiment, Applied Energy. UK, Elsevier, 2011, 88: 3615-3624.

Xuan J., Leung Y.C., Leung M.K.H., Ni M. and Wang H., A computational study of bifunctional oxygen electrode in air-breathing reversible microfluidic fuel cells, International Journal of Hydrogen Energy. UK, Elsevier, 2011, 36: 9231-9241.

Xuan J., Leung Y.C. and Wang H., Air: breathing membraneless laminar flow-based fuel cells: Can they breathe enough air?, Proceedings of the Advanced Electrochemical Energy Symposium AEES. 2011, Abstract: 1pp.

Xuan J., Leung Y.C., Leung M.K.H., Wang H. and Ni M., Chaotic flow-based fuel cell built on counter-flow microfluidic network: predicting the over-limiting current behaviour, Journal of Power Sources. UK, Elsevier, 2011, 196: 9391-9397.

Xuan J., Leung Y.C., Leung M.K.H., Ni M. and Wang H., Chemical & transport behaviors in a microfludic reformer with catalytic-support membrane for efficient hydrogen production & purification, International Journal of Hydrogen Energy. USA, Elsevier, 2012, 37: 2614-2622.

Xuan J., Leung M.K.H., Leung Y.C. and Ni M., Density-induced asymmetric pair of Dean vortices and its effects on mass transfer in a curved microchannel with two layer laminar stream, Chemical Engineering Journal. UK, Elsevier, 2011, 171: 216-223.

Xuan J., Leung Y.C., Leung M.K.H., Ni M. and Wang H., Hydrodynamic focusing in microfluidic membraneless fuel cells: breaking the trade-off between fuel utilization and current density, International Journal of Hydrogen Energy. UK, Elsever, 2011, 36: 11075-11084.

Xuan J., Leung M.K.H., Leung Y.C. and Wang H., Laminar flow-based fuel cell working under critical conditions: the effect of parasitic current, Applied Energy. UK, Elsevier, 2012, 90: 87-93.

Yang Y. and Leung Y.C., Numerical simulation on the environmental impacts of a wind trubine, 7th Annual International Symposium on Environmental. Anthen, Greece, 2012, Abstract: 1pp.

Yu C. and Leung Y.C., Life cycle analysis (LCA) for biodiesel, 7th Annual International Symposium on Environment. Anthen, Greece, 2012, Abstract: 1pp.

Yu C., Leung Y.C. and Leung M.K.H., Life cycle analysis of biodiesel and other biofuels: a review, Biodiesel: Blends, Propeties and Applications. New York, USA, Nova Science Publishers, Inc., 2011, 283-298.

Zhang Y., Yu C., Yung K.F., Leung Y.C., Sun F. and Lim B.L., Over-expression of AtPAP2 in Camelina sativa leads to faster plant growth and higher seed yield., Biotechnology for Biofuels . 2012, 5: 19-28.

Researcher : Li C

Project Title:	Stability of stochastic switched systems with application to a hover vehicle
Investigator(s):	Li C, Lam J, Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	01/2011
Completion Date:	10/2011

Researcher : Li CW

List of Research Outputs

Li C.W. and Chan B.P., Compression Regulates Cell-Matrix Adhesions and Intracellular Signaling Proteins of Human Mesenchymal Stem Cells in 3D Collagen Environment. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 35.

Li C.W. and Chan B.P., Dynamic compression regulated cell-matrix adhesions and intracellular signaling proteins of human mesenchymal stem cells in 3D collagen environment (ID:3855), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China, 2012. P-SAT-B-207.

Researcher : Li J

List of Research Outputs

Fan E.G., Chow K.W. and Li J., On doubly periodic standing wave solutions of the coupled higgs field equation, Studies in Applied Mathematics. Massachusetts Institute of Technology, 2011, 128: 86-105.

Researcher : Li P

Project Title:	Consensus Analysis and Control for Multi-agent Systems
Investigator(s):	Li P, Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	06/2012

List of Research Outputs

Chen X., Lam J., Li P. and Shu Z., Controller synthesis for positive systems under `1-induced performance, 24th Chinese Control and Decision Conference. Taiyuan, China, 2012, 92-97.

Li P., Analysis and Synthesis of Positive Systems and Related Gene Network Models, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-195.

Li P., Lam J. and Chesi G., On the Synthesis of Linear H-infinity Filters for Polynomial Systems, Systems and Control Letters. 2012, 61: 31-36.

Li P., Lam J. and Chesi G., On the synthesis of linear H_¥ filters for polynomial systems, Systems and Control Letters. 2012, 61(1): 31-36.

Li P., Lam J., Wang Z. and Date P., Positivity-preserving H_¥ model reduction for positive systems, Automatica. 2011, 47(7): 1504-1511.

Li P. and Lam J., Synchronization in networks of genetic oscillators with delayed coupling, Asian Journal of Control. 2011, 13(5): 713-725.

Simone S., Li P. and Lam J., Design of structured dynamic output feedback controllers for interconnected systems, International Journal of Control. 2011, 84(12): 2081-2091.

Researcher : Li P

List of Research Outputs

Chen X., Lam J., Li P. and Shu Z., Controller synthesis for positive systems under `1-induced performance, 24th Chinese Control and Decision Conference. Taiyuan, China, 2012, 92-97.

Li P., Analysis and Synthesis of Positive Systems and Related Gene Network Models, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-195.

Li P., Lam J. and Chesi G., On the Synthesis of Linear H-infinity Filters for Polynomial Systems, Systems and Control Letters. 2012, 61: 31-36.

Li P., Lam J. and Chesi G., On the synthesis of linear H_¥ filters for polynomial systems, Systems and Control Letters. 2012, 61(1): 31-36.

Li P., Lam J., Wang Z. and Date P., Positivity-preserving H_¥ model reduction for positive systems, Automatica. 2011, 47(7): 1504-1511.

Li P. and Lam J., Synchronization in networks of genetic oscillators with delayed coupling, Asian Journal of Control. 2011, 13(5): 713-725.

Simone S., Li P. and Lam J., Design of structured dynamic output feedback controllers for interconnected systems, International Journal of Control. 2011, 84(12): 2081-2091.

Researcher : Li S

List of Research Outputs

Li S. and Wang M., A new multifunctional nanodevice based on Au-Ag bimetallic nanoparticles for cancer detection and treatment, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Li S. and Wang M., A novel SERS-active tag based on bimetallic flowerlike Au-Ag nanoparticles, Current Nanoscience. USA, Bentham Science, 2011, 7: 969-978.

Li S. and Wang M., Branched metal nanoparticles: A review on wet-chemical syntheses and biomedical applications, Nano LIFE. Singapore, World Scientific, 2012, 2: 1230002 (22pp).

Li S. and Wang M., Folic Acid-Chitosan@Gold nanocomposite for potential diagnostic and therapeutic applications, Bionano@Nice-2011 Student/post-doctoral Travel Award at the 2011 Spring Meeting of the European Materials Research Society. Nice, France, 2011, 1pp.

Li S. and Wang M., Green synthesis of gold nanoparticles and their use in forming SERS-active nanodevices, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Li S., Ren L. and Wang M., Multifunctional nanodevices based on polymer-metal hybrid nanoparticles for cancer detection and treatment, Best Presentation Award at the 9th China-Korea Symposium on Biomaterials and Nano-Biotechnology. Sanya, China, 2011, 1pp.

Li S., Ren L. and Wang M., Multifunctional nanodevices based on polymer-metal hybrid nanoparticles for cancer detection and treatment, Proceedings of the 9th China-Korea Symposium on Biomaterials and Nano-Biotechnology. Sanya, China, 2011, 1pp.

Li S. and Wang M., Synthesis and characteristics of drug-loaded core-shell structured PLGA-Ag nanoparticles, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Li S. and Wang M., Synthesis and characteristics of multifunctional SERS tags based on Au-Ag bimetallic nanoparticles, Materials Research Society Fall Meeting. Boston, USA, 2011, 1pp.

Researcher : Li W

Project Title:	SPIE Advanced Lithography 2012 Nanoimprint templates of 6nm half-pitch lines fabricated by helium ion-beam lithography
Investigator(s):	Li W
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	02/2012
Completion Date:	02/2012

Project Title:	Flexible Composite Plasmonic Substrates for Trace-amount Chemical Sensing
Investigator(s):	Li W
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	05/2012

List of Research Outputs

Zhang W., Ding F., Li W., Wang Y., Hu J. and Chou S.Y., Giant and uniform fluorescence enhancement over large areas using plasmonic nanodots in 3D resonant cavity nanoantenna by nanoimprinting, Nanotechnology. IOP Publishing Ltd, 2012, 23(22): 225301 (9pp).

Researcher : Li Y

Project Title:	World Renewable Energy Congress VII Analysis and Design of Hybrid Ventilation and Cooling in Buildings
Investigator(s):	Li Y
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2002

Project Title:	Full-scale study of air conditioning systems for SARS wards
Investigator(s):	Li Y
Department:	Mechanical Engg
Source(s) of Funding:	Other Funding Scheme
Start Date:	06/2006

Project Title:	Healthy Buildings 2006 - Creating a Healthy Indoor Environment for People How Far Respiratory Droplets Move in Indoor Environments?
Investigator(s):	Li Y
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2006

Project Title:	Two-box models for the city-scale pollutant and heat transport
Investigator(s):	Li Y, Yang L
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	03/2010
Completion Date:	02/2012

Project Title:	Proximity effect - Exploring short-range and long-range airborne routes of expiratory exposure between people in indoor environment
Investigator(s):	Li Y
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2010
Completion Date:	08/2011

Project Title:	A 3D urban surface heat balance model for a complex high-rise compact urban canopy layer
Investigator(s):	Li Y
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	A 3D urban surface heat balance model for a complex high-rise compact urban canopy layer
Investigator(s):	Li Y
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2012

Project Title:	Whole body synthetic heat phenomenon and its application in perceived heating comfort and therapy
Investigator(s):	Li Y
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Applied Research
Start Date:	06/2012

List of Research Outputs

Chen C., Zhao Z., Yang X. and Li Y., Role of two-way airflow owing to temperature difference in severe acute respiratory syndrome transmission: revisiting the largest nosocomial severe acute respiratory syndrome outbreak in Hong Kong, Journal of the Royal Society Interface. 2011, 8(58): 699-710.

Gao X., Li Y., Xu P. and Cowling B.J., Evaluation of intervention strategies in schools including ventilation for influenza transmission control, Building Simulation. 2012, 5(1): 29:37.

Hang J. and Li Y., Age of air and air exchange efficiency in high-rise urban areas and its link to pollutant dilution. , Atmospheric Environment　. Elsevier Science, 2011, 45(31): 5572-5585.

Hang J., Li Y. and Sandberg M., Experimental and numerical studies of flows through and within high-rise building arrays and their link to ventilation strategy, Journal of Wind Engineering and Industrial Aerodynamics. 2011, 99(10): 1036-1055.

Hang J. and Li Y., Macroscopic simulations of turbulent flows through high-rise building arrays using a porous turbulence model, Building and Environment . 2012, 49: 41-54.

Hang J., Li Y., Sandberg M., Buccolieri R. and Disabatino S., The influence of building height variability on pollutant dispersion and pedestrian ventilation in idealized high-rise urban areas , Building and Environment. 2012, 56: 346-360.

Li Y. and Jang Y., (Editorial) Special Issue-Selected Papers Presented in the 6th International Symposium on Heating, Ventilating and Air Conditioning, Energy and Buildings. Nanjing, China, 2011, 43(5): 1039-1039.

Li Y., (Editorial) The secret behind the mask, Indoor Air. 2011, 21(2): 89-91.

Li Y. and Nielsen P.V., CFD and Ventilation Research, Indoor Air. 2011, 21(6): 442-453.

Li Y., Nielsen P.V. and Sandberg M., Displacement ventilation in hospital environments , ASHRAE Journal. 2011, 53(6): 86-88.

Luo Z. and Li Y., Passive urban ventilation by combined buoyancy-driven slope flow and wall flow: Parametric CFD studies on idealized city models, Atmospheric Environment. 2011, 45(32): 5946-5956.

Parient D., Morawska L., Johnson G.R., Ristovski Z.D., Hargreaves M., Mengersen K., Corbett S., Chao C.Y.H., Li Y. and Katoshevski D., Theoretical analysis of the motion and evaporation of exhaled respiratory droplets of mixed composition, Journal of Aerosol Science. 2011, 42: 1-10.

Xu P. and Li Y., Revisiting internal pressure dynamics in a single opening enclosure ventilated by wind , International Journal of Ventilation. 2011, 10(1): 1-18.

Zhai Z., Liu X., Wang H., Li Y. and Liu J., Experimental verification of tracking algorithm for dynamically-releasing single indoor contaminant , Building Simulation. 2012, 5(1): 5:14.

Zhai Z., Liu X., Wang H., Li Y. and Liu J., Identifying index (source) patient location of SARS transmission in a hospital ward , HVAC&R Research. 2012, 18(4): 616-625.

Zhang L. and Li Y., Dispersion of coughed droplets in a fully-occupied high-speed rail cabin , Building and Environment. 2012, 47: 58-66.

Zhang Y., Mo J., Li Y., Sundell J., Wargocki P., Zhang J., Little J.C., Corsi R., Deng Q., Leung M.K.H., Fang L., Chen W., Li J. and Sun Y., Can commonly-used fan-driven air cleaning technologies improve indoor air quality? A literature review, Atmospheric Environment. 2011, 45: 4329-4343.

Researcher : Li YY

Project Title:	Roles of cell-matrix interactions and cytoskeleton during chondrogenesis of mesenchymal stem cells in three-dimensional collagen-GAG scaffold
Investigator(s):	Li YY, Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	04/2012

Project Title:	World Forum for Spine Research 2012: The Intervertebral Disc—from Degeneration to Pain Developing a photochemically crosslinked collagen plug to solve the cell leakage problem for intradiscal injection of mesenchymal stem cells (MSCs) - A pilot study
Investigator(s):	Li YY
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2012

List of Research Outputs

Chik T.K., Choy T.H.A., Teng W.K., Ma X.Y., Li Y.Y., Leung Y.L., Cheung K.M.C. and Chan B.P., Developing a photochemically crosslinked collagen plug to solve the cell leakage problem for intra-discal injection of mesenchymal stem cells: A pilot study., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P117.

Diao H., Li Y.Y., Chow S.T., An X., Leung Y.L., Cheung K.M.C. and Chan B.P., Intradiscal Delivery of Mesenchymal Stem Cells in Collagen Microspheres in A Rabbit Disc Degeneration Model – A Preliminary Study. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 171.

Li Y.Y., Cheng H.W., Chan P.M., Wong M.Y., Teng W.K., Chow S.T., Cheung K.M.C., Chan D. and Chan B.P., Collagen-mesenchymal stem cell microspheres for the repair of articular cartilage defects in a rabbit model., Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 86.

Li Y.Y., Diao H., Chow S.T., Leung Y.L., Cheung K.M.C. and Chan B.P., Intradiscal delivery of mesenchymal stem cells in collagen microspheres in a rabbit disc degeneration model: A preliminary study., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P113.

Researcher : Lin Y

Project Title:	Investigation of the role of focal adhesion in mechanosensing
Investigator(s):	Lin Y
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2010
Completion Date:	05/2012

Project Title:	A theoretical and experimental investigation of actin-based motility
Investigator(s):	Lin Y, Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	10/2010

Project Title:	Mechanics of bio-filaments
Investigator(s):	Lin Y
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2011

Project Title:	Stretch-induced Cell Alignment – An Ideal Phenomenon for Investigating Mechanotransduction
Investigator(s):	Lin Y
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	Behavior of biological cells in response to mechanical stretch
Investigator(s):	Lin Y
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2012

List of Research Outputs

Hu B., Shenoy V.B. and Lin Y., Buckling and enforced stretching of bio-filaments, Journal of the Mechanics and Physics of Solids. 2012, 60.

Lin Y. and Yao S., Conformation and Confinement Energy of Interacting End-grafted Molecules, International Journal of Applied Mechanics. 2012, 4: 1250008.

Researcher : Liu CH

Project Title:	LESChem: Large-Eddy Simulation and Wind Tunnel Experiments for the Transport of Chemically Reactive Air Pollutants in Urban Canopies
Investigator(s):	Liu CH, Lam KM
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2010

Project Title:	Wind and Air Pollutant Transport in the Urban Canopy Layer under Unstable Stratification: Development of an Experimental Dataset for Computer Model Validation Exercises
Investigator(s):	Liu CH
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2010
Completion Date:	05/2012

Project Title:	LESSVOCs: Large-Eddy Simulation and Wind Tunnel Experiments for the Transport of Semivolatile Organic Compounds in Urban Canopies
Investigator(s):	Liu CH
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2010
Completion Date:	08/2011

Project Title:	Large-Eddy Simulation for the Transport of Semivolatile Organic Compounds in Urban Areas
Investigator(s):	Liu CH
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2011

Project Title:	LESThermoChem: Large-Eddy Simulation of Chemically Reactive Pollutant Transport in Street Canyons and the Urban Boundary Layer under Thermal Stratification
Investigator(s):	Liu CH
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2012

Project Title:	Coupling of the Urban and the Atmospheric Boundary Layers – a Large-Eddy Simulation Approach
Investigator(s):	Liu CH
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2012

List of Research Outputs

Chan M.C. and Liu C.H., Large-Eddy Simulation of Flows over Idealized Urban Roughness in Unstable Thermal Stratification, 16th Annual Conference of Hong Kong Theoretical and Applied Mechanics; 1st Mainland - Hong Kong Youth Forum on Mechanics; and 8th Shanghai – Hong Kong Forum on Mechanics and Its Applications, March 17, 2012, City University of Hong Kong, Hong Kong . 2012.

Chan M.C. and Liu C.H., Large-eddy simulation of flows & pollutant dispersion over urban areas in thermal stratification, Croucher Advanced Study Institute 2011-2012, Urban Climatology for Tropical and Sub-Tropical Regions, December 5 to 10, 2011, School of Architecture, The Chinese University of Hong Kong. 2011.

Chan M.C. and Liu C.H., Large-eddy simulation of flows over idealized urban areas in thermal stratification, European Geosciences Union General Assembly 2012, April 22 to 27, 2012, Vienna, Austria. 2012.

Cheng W.C. and Liu C.H., Effect of unstable thermal stratification on the atmospheric boundary layer above urban street canyon by large-eddy simulation, HARMO14 - 14th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes, October 2 to 6, 2011, Kos Island, Greece. 2011.

Cheng W.C. and Liu C.H., Large-eddy simulation of the atmospheric boundary layer above urban street canyons with different unstable stratification, International Workshop on Urban Weather and Climate: Observation and Modeling, July 12 to 15, 2011, Beijing, China. 2011.

Chung N.H. and Liu C.H., A study of local instability of reactive pollutant dispersion using large-eddy simulation, International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Chung N.H. and Liu C.H., Large-eddy simulation of reactive pollutant dispersion for the spatial instability of photostationary state over idealized 2D urban street canyons, 14th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes, October 2 to 6, 2011, Kos Island.. 2011.

Chung N.H., Tse Y.Y. and Liu C.H., Study of pollutant transfer coefficient in street canyons in different flow regimes with large-eddy simulation and k-ε turbulence modeling, First International Conference on Sustainable Urbanization (ICSU 2010), December 15 to 17, 2010, Hong Kong, China. 2011.

Chung N.H. and Liu C.H., Ventilation and pollutant removal performance in street canyons of different aspect ratios: an LES solution, 13th International Conference on Wind Engineering (ICWE13), July 10 to 15, 2011, Amsterdam, The Netherlands. 2011.

Fan Y., Cheung L.K., Chong M.M., Chua H.D.P., Chow K.W. and Liu C.H., Computational fluid dynamics analysis on the upper airways of obstructive sleep apnea using patient = specific models, IAENG International Journal of Computer Science. 2011, 38:4: 10.

Ho Y.K. and Liu C.H., Wind tunnel measurement of turbulent boundary layer over hypothetical urban roughness elements, European Geosciences Union General Assembly 2012, April 22 to 27, 2012, Vienna, Austria. 2012.

Leung K.K. and Liu C.H., Laboratory measurements of local mass transfer velocity over idealized 2D urban streets, The Sixth International Conference on Fluid Mechanics (ICFM6), June 30 to July 3, 2011, Guangzhou, China. 2011.

Leung K.K. and Liu C.H., Local mass transfer velocity over idealized 2D urban street models , International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Leung K.K. and Liu C.H., Measurements of local mass transfer coefficients over idealized 2D urban street canyons , 13th International Conference on Wind Engineering (ICWE13), July 10 to 15, 2011, Amsterdam, The Netherlands. 2011.

Leung K.K. and Liu C.H., On the Spatial Behaviors of Local Mass Transfer Coefficients Over Idealized Two-Dimensional Urban Street Canyons, HARMO14 - 14th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes, October 2 to 6, 2011, Kos Island, Greece. 2011.

Leung K.K. and Liu C.H., On the aerodynamic characteristics over idealized two-dimensional urban street canyon models, European Geosciences Union General Assembly 2012, April 22 to 27, 2012, Vienna, Austria. 2012.

Leung K.K., Wong C.C., Liu C.H., Ng G.C.T. and Lo J.C.Y., On the spatial behaviors of local mass transfer coefficients over idealized two-dimensional urban street canyons, Croucher Advanced Study Institute 2011-2012, Urban Climatology for Tropical and Sub-Tropical Regions, December 5 to 10, 2011, School of Architecture, The Chinese University of Hong Kong, Hong Kong. 2011.

Leung K.K. and Liu C.H., On the study of ventilation and pollutant removal over idealized two-dimensional urban street canyons, Building Simulation: an International Journal. 2012.

Liu C.H., Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hong Kong Electric Co. Ltd., 2012.

Liu C.H. and Chung N.H., Forced convective heat transfer over ribs at various separation, International Journal of Heat and Mass Transfer. Elsevier, 2012, 55: 5111-5119.

Liu C.H., Cheng W.C., Chung N.H., Wong C.C. and Leung K.K., On the Mechanism of Pollutant Removal from Two-Dimensional Idealized Urban Street Canyons, International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Liu C.H. and Chung N.H., On the NOx-O3 Plume Transport over Two-Dimensional Idealized Urban Street Canyons, 13th International Conference on Wind Engineering (ICWE13), July 10 to 15, 2011, Amsterdam, The Netherlands. 2011.

Liu C.H., Supplementary report of Efficiency airflow of flat and ownership of air grilles for Grenville House, 1-3, Magazine Gap Road, Hong Kong, 2011.

Wong C.C. and Liu C.H., Large-Eddy Simulation of Pollutant Dispersion over Two-Dimensional Idealized Street Canyons, International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Wong C.C. and Liu C.H., Plume dispersion over two-dimensional urban roughness: an LES approach, Croucher Advanced Study Institute 2011-2012, Urban Climatology on Tropical and Sub-Tropical Regions, December 5 to 10, 2011, School of Architecture, The Chinese University of Hong Kong, Hong Kong.. 2011.

Wong C.C. and Liu C.H., Pollutant dispersion over two-dimensional idealized street canyons: a Large-eddy simulation approach, HARMO14 ‐ 14th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes Kos Island, Greece, October 2 to 6, 2011.

Wong C.C. and Liu C.H., Pollutant removal, dispersion, and entrainment over 2D idealized street canyons, 13th International Conference on Wind Engineering (ICWE13), July 10 to 15, 2011, Amsterdam, The Netherlands . 2011.

Wong C.C. and Liu C.H., Turbulent plume dispersion over two-dimensional idealized urban street canyons, European Geosciences Union General Assembly 2012, April 22 to 27, 2012, Vienna, Austria. 2012.

Researcher : Liu F

Project Title:	Hybrid Tandem and Quantum-Dot Solar Cells
Investigator(s):	Liu F
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	11/2009
Completion Date:	10/2011

Project Title:	High-performance polycrystalline-silicon thin-film solar cells on inexpensive substrates via novel approaches
Investigator(s):	Liu F
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2010
Completion Date:	08/2011

Project Title:	High-quality polycrystalline-silicon thin films for solar cells via novel approaches
Investigator(s):	Liu F
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	The 38th IEEE Photovoltaic Specialists Conference Silicon grain boundary passivation for photovoltaics: A novel approach with small polar molecules
Investigator(s):	Liu F
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2012
Completion Date:	06/2012

List of Research Outputs

Liu F., Principles of Energy Conversion Cells, Graduate School at Shenzhen, Tsinghua University. 2012.

Liu F., Solar Cells: Harnessing Energy from the Sun, Department of Physics, Shanghai University. 2012.

Wang W., Wang L., Liu F., Yan F., Johnston S. and Al-Jassim M., Silicon Grain Boundary Passivation for Photovoltaics: A Novel Approach with Small Polar Molecules, Proc. of The 37th IEEE Photovoltaic Specialists Conference. 2012.

Researcher : Liu G

List of Research Outputs

Sze K.Y., Zhang Q. and Liu G., Hybrid quadrilateral finite element models for axial symmetric Helmholtz problem, Finite Elements in Analysis and Design. 2012, 52: 1-10.

Sze K.Y., Zhang Q. and Liu G., Multi-field three-node triangular finite element models for Helmholtz Problem, Journal of Computational Acoustics. 2011, 19: 317-344.

Researcher : Liu L

List of Research Outputs

Liu L., Expiratory Droplet Exposure Between Individuals in a Ventilated Room, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-185.

Researcher : Luo Z

Project Title:	Urban Physics 2012-interaction across all scales Street Canyon Ventilation by Slope Wind from Vegetated Mountain Slope
Investigator(s):	Luo Z
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	05/2012
Completion Date:	05/2012

List of Research Outputs

Luo Z. and Li Y., Passive urban ventilation by combined buoyancy-driven slope flow and wall flow: Parametric CFD studies on idealized city models, Atmospheric Environment. 2011, 45(32): 5946-5956.

Researcher : Ma J

List of Research Outputs

Ma J. and Chan B.P., Femtosecond laser-induced two-photon fabrication of protein structures with controllable voxel features (ID: 4126), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China, 2012. P-MON-C-051.

Ma J., Xu J., Cheng J.P., Cheng S.H. and Chan B.P., Free form submicron-biofabrication of protein matrix via multiphoton photochemical crosslinking. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 125.

Xu J., Ma J., Cheng J.P., Cheng S.H. and Chan B.P., Multiphoton fabrication of micro-engineered structures with controllable porosity and mechanical properties. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 122.

Researcher : Mak HMH

List of Research Outputs

Mak H.M.H., Effective Slip Due to Stokes Flow Through Channels with Patterned Stick-slip Walls, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-128.

Researcher : Ng CO

Project Title:	A homogenization-based model for roughness-induced apparent slip
Investigator(s):	Ng CO
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2010

Project Title:	Mass transport in directional electroosmotic flow by interactive oscillatory electrical forcings
Investigator(s):	Ng CO
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	03/2010
Completion Date:	02/2012

Project Title:	Electrohydrodynamic slip flow through a channel with micropatterned surfaces
Investigator(s):	Ng CO
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2011

List of Research Outputs

Chan Y.K., Ng C.O., Knox P.C., Garvey M.J., Williams R.L. and Wong D.S.H., Emulsification of silicone oil and eye movements, Investigative Ophthalmology & Visual Science. Association for Research in Vision and Ophthalmology, 2011, 52(13): 9721–9727.

Chen Y.Y., Li M.S., Hsu H.C. and Ng C.O., Theoretical and experimental study of particle trajectories for nonlinear water waves propagating on a slope bottom, Philosophical Transactions of the Royal Society A. UK, Royal Society Publishing, 2012, 370: 1543–1571.

Chu H.C.W. and Ng C.O., Electrokinetic flows through a parallel-plate channel with slipping stripes on walls, Bulletin of the American Physical Society. The 64th Annual Meeting of the APS Division of Fluid Dynamics, Baltimore, Maryland, U.S.A., November 20–22. USA, APS, 2011, 56(18): 133.

Chu H.C.W. and Ng C.O., Oscillatory electrokinetic slip flows through a micropatterned channel, In: Jane W.Z. Lu and Jeff J.F. Wang, Proceedings of the 16th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 1st Mainland-Hong Kong Youth Forum on Mechanics, and the 8th Shanghai-Hong Kong Forum on Mechanics and Its Application, Hong Kong, March 17. HKSTAM, 2012, 80.

Hsu H.C., Ng C.O. and Hwung H.H., A new Lagrangian asymptotic solution for gravity–capillary waves in water of finite depth, Journal of Mathematical Fluid Mechanics. 2012, 14(1): 79–94.

Hsu H.C., Ng C.O. and Hwung H.H., Particle trajectories in nonlinear interfacial water waves, In: Joseph Hun-wei Lee, Chiu-On Ng, Proceedings of the Sixth International Conference on Asian and Pacific Coasts (APAC 2011), Hong Kong, China, December 14–16. Singapore, World Scientific, 2011, 1703-1710.

Lee J.H.W. and Ng C.O., Asian and Pacific Coasts 2011, Proceedings of the 6th International Conference on Asian and Pacific Coasts (APAC 2011). Singapore, World Scientific, 2011.

Lee J.H.W. and Ng C.O., Co-Editors, In: Joseph Hun-wei Lee, Chiu-On Ng, Asian and Pacific Coasts 2011. Singapore, World Scientific, 2011.

Nandeppanavar M.M., Vajravelu K., Abel M.S. and Ng C.O., Heat transfer over a nonlinearly stretching sheet with non-uniform heat source and variable wall temperature, International Journal of Heat and Mass Transfer. Elsevier, 2011, 54(23-24): 4960–4965.

Ng C.O., Associate Editor since August 2009, HKIE Transactions. Hong Kong, HKIE, 2011.

Ng C.O., Associate Editor since September 2009, Journal of Applied Fluid Mechanics. Iran, Physical Society of Iran, 2011.

Ng C.O., Editorial Advisory Board Member, since December 2007, The Open Ocean Engineering Journal. Bentham Science Publishers, 2011.

Ng C.O., Editorial Advisory Board Member, since October 2007, The Open Oceanography Journal. Bentham Science Publishers, 2011.

Ng C.O. and Wang C.Y., Effective slip for Stokes flow over a surface patterned with two- or three-dimensional protrusions, Fluid Dynamics Research. IOP Publishing, 2011, 43(6): 065504.

Ng C.O. and Chu H.C.W., Electrokinetic flows through a parallel-plate channel with slipping stripes on walls, Physics of Fluids. New York, USA, AIP, 2011, 23(10): 102002.

Ng C.O., Homogenization Technique Applied to Problems of Taylor Dispersion, Invited Talk at the School of Civil and Environmental Engineering, Nanyang Technological University, Singapore, May 3. 2012.

Ng C.O., ISST Journal of Mathematics & Computer Sciences, Editorial Board Member, since November 2009. India, Intellectuals Society for Socio-Techno Welfare, 2011.

Ng C.O., ISST Journal of Mechanical Engineering, Editorial Board Member, since November 2009. India, Intellectuals Society for Socio-Techno Welfare, 2011.

Ng C.O., Invited (international) Editorial Board Committee Member, since August 2003, Journal of Hydrodynamics. Shanghai, China, Publishing House for Journal of Hydrodynamics, 2011.

Ng C.O., Member of the Editorial Board, since July 2006, Engineering Applications of Computational Fluid Mechanics. Hong Kong, The Hong Kong Polytechnic University, 2011.

Ng C.O. and Hsu H.C., Steady streaming and set-up due to gravity-capillary waves in a viscous fluid, In: Joseph Hun-wei Lee, Chiu-On Ng, Proceedings of the Sixth International Conference on Asian and Pacific Coasts (APAC 2011), Hong Kong, China, December 14–16. Singapore, World Scientific, 2011, 1729-1737.

Paul S. and Ng C.O., Dispersion in electroosmotic flow generated by oscillatory electric field interacting with oscillatory wall potentials, Microfluidics and Nanofluidics. Springer, 2012, 12(1): 237–256.

Paul S. and Ng C.O., On the time development of dispersion in electroosmotic flow through a rectangular channel, Acta Mechanica Sinica. Springer Verlag, 2012, 28(3): 631–643.

Shivakumara I.S., Ng C.O. and Ravisha M., Ferromagnetic convection in a heterogeneous Darcy porous medium using a local thermal non-equilibrium (LTNE) model, Transport in Porous Media. Dordrecht, Netherland, Kluwer Academic, 2011, 90(2): 529–544.

Shivakumara I.S., Ng C.O. and Nagashree M.S., The onset of electrothermoconvection in a rotating Brinkman porous layer, International Journal of Engineering Science. 2011, 49(7): 646–663.

Wang C.Y. and Ng C.O., Slip flow due to a stretching cylinder, International Journal of Non-Linear Mechanics. 2011, 46(9): 1191–1194.

Wang J., Huang S.L. and Ng C.O., Iterative method on well bore boundary in numerical modeling of variably saturated flow, Transactions of Tianjin University. Tianjin, China, Tianjin University, 2012, 18(2): 104–111.

Zhou Q. and Ng C.O., Cross flow through a corrugated channel with patterned slip, In: Jane W.Z. Lu and Jeff J.F. Wang, Proceedings of the 16th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 1st Mainland-Hong Kong Youth Forum on Mechanics, and the 8th Shanghai-Hong Kong Forum on Mechanics and Its Application, Hong Kong, March 17. HKSTAM, 2012, 57.

Researcher : Ng KY

List of Research Outputs

Cheng C., Ng K.Y. and Ngan A.H.W., Quantitiative characterization of acid concentration and temperature dependent self-ordering conditions of anodic porous alumina, AIP Advances. 2011, 1: 042113/1 - 042113/11.

Ng K.Y., Grimer R.E.J. and Tse Y.Y., Determination of Ultra Light Weight Masses Using AFM and FIB Technology, The Hong Kong Institution of Engineers Transactions. 2011, 18: 22-26.

Ng K.Y. and Ngan A.H.W., Effects of pore-channel ordering on the mechanical properties of anodic aluminum oxide nano-honeycombs, Scripta Materialia. 2012, 66: 439–442.

Ng K.Y. and Ngan A.H.W., Precise control of nanohoneycomb ordering over anodic aluminum oxide of square centimeter areas, Chemistry of Materials. American Chemical Society, 2011, 23: 5264-5268.

Ng K.Y., Tse Y.Y. and Grimer R.E.J., The HKIE Best Transactions Paper Prize 2012, The HKIE Transactions. 2011, 18: 22.

Ngan A.H.W., Ng K.Y. and Cheng C., “Anodized porous alumina with controlled pore-channel ordering – fabrication, theory and mechanical properties”, Special Lecture, , 6th International Conference on Advanced Materials Development and Performance, Tokushima, Japan, July 15-18, 2011.. 2011.

Wang S., Ngan A.H.W. and Ng K.Y., Anomalous load dependence in single-asperity tribological behaviour of anodic aluminium oxide nanohoneycombs, Scripta Materialia. Elsevier, 2012, 67: 360-363.

Researcher : Ng SY

List of Research Outputs

Ng S.Y. and Ngan A.H.W., Fabrication of nanometer-to-mincron sized Cu₂O single crystals by electrodeposition, Electrochimica Acta. Elsevier, 2011, 56: 7686-7695.

Researcher : Ngan AHW

Project Title:	Stress-exponent measurement of nano-grained thin-films by nanoindentation
Investigator(s):	Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	09/2002

Project Title:	Statistical distribution, size and time dependence of initial yield strength in submicron crystals
Investigator(s):	Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	09/2006

Project Title:	Outstanding Researcher Award 2006-2007
Investigator(s):	Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	Outstanding Researcher Award
Start Date:	11/2007

Project Title:	Nano-biotechnology
Investigator(s):	Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding for Strategic Research Theme
Start Date:	07/2008

Project Title:	Microstructure and Mechanical properties of metal nano-wires
Investigator(s):	Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	Travel Grants for NSFC/RGC JRS
Start Date:	12/2008

Project Title:	Bio-nanomechanics Laboratory
Investigator(s):	Ngan AHW, Luk KDK, Lu WW, Wang M, Chan BP, Tang B
Department:	Mechanical Engg
Source(s) of Funding:	UGC One-off Special Equipment Grant Scheme
Start Date:	12/2008

Project Title:	Ultra-high Strength Micro-sized Materials
Investigator(s):	Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	10/2010

Project Title:	Acoustoplasticity: theory and experiment
Investigator(s):	Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	04/2011

Project Title:	Anodized Aluminium Oxide Nano-honeycomb with Selective Spatial Ordering of Pore Channels by Substrate Conditioning - Theory and Experiment
Investigator(s):	Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	International Symposium on Plasticity 2012 and Its Current Applications (Plasticity 2012) New dislocation-based insights into ultrasonic softening of metals
Investigator(s):	Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	01/2012
Completion Date:	01/2012

Project Title:	Understanding the growth and properties of nano-honeycomb alumina
Investigator(s):	Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	05/2012

List of Research Outputs

Chan Y.L., Ngan A.H.W. and King N.M., Nano-scale structure and mechanical properties of the human dentine-enamel junction , Journal of the Mechanical Behaviour of Biomedical Materials. 2011, 4: 785-795.

Chan Y.L., Ngan A.H.W. and King N.M., Nanomechanical Characterization of Mineralized Tissues in the Oral Cavity, In: Karthikeyan Subramani; Waqar Ahmed, Emerging Nanotechnologies in Dentistry: Materials, Processes, and Applications. 2011.

Chen X. and Ngan A.H.W., Tensile deformation of silver micro-wires of small thickness-to-grain-size ratios, Materials Science and Engineering A. Elsevier B.V., 2012, 539: 74-84.

Cheng C. and Ngan A.H.W., Modelling and simulation of self-ordering in anodic porous alumina, Electrochimica Acta. Elsevier Ltd, 2011, 56: 9998-10008.

Cheng C., Ng K.Y. and Ngan A.H.W., Quantitiative characterization of acid concentration and temperature dependent self-ordering conditions of anodic porous alumina, AIP Advances. 2011, 1: 042113/1 - 042113/11.

Leung Y.L., Aladin K.D.M., Lv F., Tam V., Sun Y., Tang B., Ngan A.H.W., Luk K.D.K., Chan D. and Cheung K.M.C., Mesenchymal stromal cells rescue disc degeneration and function via suppression of fibrotic events, Days of Molecular Medicine, AAAS. 2011.

Ng K.Y. and Ngan A.H.W., Effects of pore-channel ordering on the mechanical properties of anodic aluminum oxide nano-honeycombs, Scripta Materialia. 2012, 66: 439–442.

Ng K.Y. and Ngan A.H.W., Precise control of nanohoneycomb ordering over anodic aluminum oxide of square centimeter areas, Chemistry of Materials. American Chemical Society, 2011, 23: 5264-5268.

Ng S.Y. and Ngan A.H.W., Fabrication of nanometer-to-mincron sized Cu₂O single crystals by electrodeposition, Electrochimica Acta. Elsevier, 2011, 56: 7686-7695.

Ngan A.H.W., Tang B., Chan Y.L., Wu K.S. and Zhou Z., "Nanomechanical Characterization of Biological Tissues", Invited Talk,, 4th International Indentation Workshop (IIW4), July 3-8, 2011, Seoul National University, South Korea.. 2011.

Ngan A.H.W., An explanation for the power-law scalign of size effect on strength in micro-speciments, Scripta Materialia. Elsevier, 2011, 65: 978-981.

Ngan A.H.W., Member of Editorial Board, International Journal of Plasticity. 2011.

Ngan A.H.W., Nanomechanical Behaviour of Materials and Biological Tissues, Hong Kong Research Grants Council Public Lecture Series, October 8, 2011, Hong Kong Science Museum, Hong Kong. 2011.

Ngan A.H.W. and Siu K.W., New Dislocation-based Insights into Acoustoplasticity, Keynote Lecture, The 16th International Symposium on Plasticity and Its Current Applications (Plasticity 2012), January 3-8, 2012 at San Juan, Puerto Rico, USA.. 2012.

Ngan A.H.W., Ng K.Y. and Cheng C., “Anodized porous alumina with controlled pore-channel ordering – fabrication, theory and mechanical properties”, Special Lecture, , 6th International Conference on Advanced Materials Development and Performance, Tokushima, Japan, July 15-18, 2011.. 2011.

Ngan A.H.W., “Stochastic plastic events in small metal volumes”, invited lecture, Gordon Research Conference on Physical Metallurgy, July 31 - August 5, 2011, Stonehill College in Easton, MA, USA.. 2011.

Siu K.W. and Ngan A.H.W., Understanding acoustoplasticity through dislocation dynamics simulations, Philosophical Magazine. Taylor & Francis, 2011, 91(34): 4367-4387.

Siu K.W. and Ngan A.H.W., “New insights on acoustoplasticity: superimposed oscillatory stress enhances dislocation annihilation”, invited talk, International Conference on Processing and Manufacturing of Advanced Materials (THERMEC’2011), Quebec City, Canada, August 1-5, 2011. 2011.

Tang B. and Ngan A.H.W., A rate-jump method for characterization of soft tissues using nanoindentation techniques, Soft Matter. The Royal Society of Chemistry, 2012, 8: 5974-5979.

Tang B., Aifantis K.E. and Ngan A.H.W., Elastic modulus of nanostructured polymer surfaces, Materials Letters. Elsevier, 2011, 67: 237-240.

Wang S., Ngan A.H.W. and Ng K.Y., Anomalous load dependence in single-asperity tribological behaviour of anodic aluminium oxide nanohoneycombs, Scripta Materialia. Elsevier, 2012, 67: 360-363.

Wong K.L., Ngan A.H.W., Shum D.K.Y. and Lu W.W., Nanomechanical study of vimentin intermediate filament , 16th Research Postgraduate Symposium, HKU, December 7-8, 2011. Hong Kong.

Zhou Z., Tang B., Ngan A.H.W., Dong Z.N. and Wu Y.S., Hepatitis B surface antigen - antibody interactions studied by optical tweezers, IET Nanobiotechnology. 2012, 6(1): 9-15.

Zhou Z., Ngan A.H.W., Tang B. and Wang A.X., Reliable measurement of elastic modulus of cells by nanoindentation in an atomic force microscope, Journal of the Mechanical Behavior of Biomedical Materials. Elsevier Ltd., 2012, 8: 134-142.

Zhou Z., Tang B. and Ngan A.H.W., The biomechanics of drug-treated leukemia cells investigated using optical tweezers, Nano Life. World Scientific Publishing Co., 2012, 2(1): 1250010-1 to 1250010-10.

Researcher : Niu H

List of Research Outputs

Niu H. and Leung Y.C., Modelling of a bacterial bioreactor for nitric oxide abatement, 8th APCSEET 2011. Adelaide, Australia, Abstract book.

Researcher : Paul S

List of Research Outputs

Paul S. and Ng C.O., Dispersion in electroosmotic flow generated by oscillatory electric field interacting with oscillatory wall potentials, Microfluidics and Nanofluidics. Springer, 2012, 12(1): 237–256.

Paul S. and Ng C.O., On the time development of dispersion in electroosmotic flow through a rectangular channel, Acta Mechanica Sinica. Springer Verlag, 2012, 28(3): 631–643.

Researcher : Ren X

List of Research Outputs

Ren X., Wang Z.R., Xin J.Z., Wang X.L., Shi S.Q., Ruotolo A., Chan K.L. and Leung C.W., Low power flexible organic thin film transistors with amorphous Ba0.7Sr0.3TiO3 gate dielectric grown by pulsed laser deposition at low temperature, In: Prof. Antoine Kahn, Organic Electronics. Elsevier, 2012, 13: 1223.

Ren X., Wang S.M., Leung C.W., Yan F. and Chan K.L., Thermal annealing and temperature dependences of memory effect in organic memory transistor, Applied Physics Letters. American Institute of Physics, 2011, 99: 043303.

Wang Z.R., Xin J.Z., Ren X., Leung C.W. and Chan K.L., High mobility low driving voltage organic transistor with high k amorphous BST (Ba_0.7Sr_0.3TiO₃) gate dielectric on flexible substrate, MRS Fall 2011. Boston, MA, USA, Poster.

Researcher : Shabayek AAE

Project Title:	11th International Association of Management of Technology Conference (IAMOT) Government's Support for Small & Medium Enterprises (SMEs) for Prospering Hong Kong Economy: Impacts of Globalization & China Joining WTO
Investigator(s):	Shabayek AAE
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	03/2002

Researcher : Shi Y

List of Research Outputs

Shi Y. and Soh A.K., Effects of frequency and temperature evolution of polar nanoregions on susceptibility dispersion and polarization mechanism in relaxors, Journal of Applied Physics. 2011, 110(12): 124108.

Shi Y. and Soh A.K., Effects of volume evolution of static and dynamic polar nanoregions on the dielectric behavior of relaxors, Applied Physics Letters. 2011, 99(9): 092908.

Shi Y. and Soh A.K., Modeling of enhanced electrocaloric effect above the Curie temperature in relaxor ferroelectrics, Acta Materialia. 2011, 59(14): 5574-5583.

Researcher : Shu J

Project Title:	The Fourth International Conference on Hydrodynamics Impact of Breaking Wave on a Wall
Investigator(s):	Shu J
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	09/2000

Project Title:	International Conference on Applied Mathematics The Additivity of the Soliton Equation and Exact N-Envelope-Soliton Solutions of the Hirota Equation
Investigator(s):	Shu J
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	09/2000

Researcher : Shui P

List of Research Outputs

Shui P., A CFD Study for Upward and Sideward Removal of Air Pollutions in Three-dimensional Street Canyons, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-111.

Researcher : Shum HC

Project Title:	Synthesis and assembly of small soft particles in capillary microfluidics
Investigator(s):	Shum HC
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	01/2011

Project Title:	Green Droplet Microfluidics
Investigator(s):	Shum HC
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	Formation and mechanics of hierarchically structured soft particles by phase separation in confined droplets
Investigator(s):	Shum HC
Department:	Mechanical Engg
Source(s) of Funding:	NWO / RGC Joint Research Scheme - Travel Grants
Start Date:	07/2011

Project Title:	Dripping-Jetting in non-Newtonian Multiphase Flows
Investigator(s):	Shum HC
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	04/2012

Project Title:	The 3rd International Conference on Advances in Microfluidics and Nanofluidics 2012 Fluid dynamics in Multiphase System with Low Interfacial Tension
Investigator(s):	Shum HC
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	05/2012
Completion Date:	05/2012

Project Title:	Development of an enhanced liquid dispensing system for electronic packaging
Investigator(s):	Shum HC
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Applied Research
Start Date:	06/2012

List of Research Outputs

Chen H., Li J., Shum H.C., Stone H.A. and Weitz D.A., Breakup of double emulsions in constrictions, Soft Matter. 2011, 7(6): 2345-2347.

Duncanson W.J., Abbaspourrad A., Shum H.C., Kim S., Adams L.L.A. and Weitz D.A., Monodisperse Gas-Filled Microparticles from Reactions in Double Emulsions, Langmuir. 2012, 28(17): 6742-6745.

Kim S., Shum H.C., Kim J.W., Cho J. and Weitz D.A., Multiple Polymersomes for Programmed Release of Multiple Components, Journal of the American Chemical Society. 2011, 133(38): 15165-15171.

Sauret A. and Shum H.C., Fluid Dynamics in Multiphase System with Low Interfacial Tension, The 3rd International Conference on Advances in Microfluidics and Nanofluidics (AMN 2012). 2012.

Sauret A. and Shum H.C., Forced generation of simple and double emulsions in all-aqueous systems, Applied Physics Letters. 2012, 100(15).

Shum H.C., All-aqueous Multi-phase Microfluidics, China Soft Matter Day, Guangdong University of Technology, Guangzhou, China. 2012.

Shum H.C., Droplet Microfluidics As A Tool For Material Fabrication, Department of Electronic Engineering, Chinese University of Hong Kong. 2011.

Shum H.C., Manipulating Fluids For Fabricating Functional Materials, UK Colloids 2011. 2011.

Shum H.C., Thiele J. and Kim S.H., Microfluidic fabrication of vesicles, Advances in Transport Phenomena. 2012.

Shum H.C., Varnell J. and Weitz D.A., Microfluidic fabrication of water-in-water (w/w) jets and emulsions, Biomicrofluidics. 2012, 6(1).

Shum H.C., Multi-phase microfluidics- Opportunities in biomedical engineering, Department of Biology and Chemistry, City University of Hong Kong, Hong Kong. 2012.

Shum H.C., Multi-phase microfluidics- Opportunities in biomedical engineering, National Center for Nanoscience and Technology, Chinese Academy of Sciences, Beijing, China. 2012.

Shum H.C., Multi-phase microfluidics, Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei, China. 2012.

Shum H.C. and Weitz D.A., Multicompartment Polymersome Gel for Encapsulation, Soft Matter. 2011.

Shum H.C., Zhao Y., Kim S. and Weitz D.A., Multicompartment Polymersomes from Double Emulsions, Angewandte Chemie-International Edition. 2011, 50(7): 1648-1651.

Shum H.C., Multiphase microfluidics for fabricating complex particles, Institute of Complex Molecular Systems, Eindhoven University of Technology, Eindhoven, Netherlands. 2012.

Song Y. and Shum H.C., Microfluidic Fabrication of Materials by Using All-Aqueous Emulsion as Templates, The 3rd International Conference on Advances in Microfluidics and Nanofluidics (AMN 2012). 2012.

Thiele J., Windbergs M., Abate A.R., Trebbin M., Shum H.C., Foerster S. and Weitz D.A., Early development drug formulation on a chip: Fabrication of nanoparticles using a microfluidic spray dryer, Lab on a Chip. 2011, 11(14): 2362-2368.

Uchida Y., Kanai T., Shum H.C. and Weitz D.A., Colloidal Particles In Nematic Droplets, 23rd International Liquid Crystal Conference. 2011.

Vladisavljevic G.T., Shum H.C. and Weitz D.A., Control over the shell thickness of core/shell drops in three-phase glass capillary devices, In: Starov, Victor; Griffiths, Peter , Progress in Polymer and Colloid Science. Springer, 2012, 139, VIII, 120,: 115.

Vladisavljevic G.T., Duncanson W.J., Shum H.C. and Weitz D.A., Fabrication Of Biodegradable Poly(lactic Acid) Particles In Flow Focusing Glass Capillary Devices, UK Colloids 2011.

Zhao Y., Shum H.C., Adams L.L.A., Sun B., Holtze C., Gu Z. and Weitz D.A., Enhanced Encapsulation of Actives in Self-Sealing Microcapsules by Precipitation in Capsule Shells, Langmuir. 2011, 27(23): 13988-13991.

Researcher : Siu KW

List of Research Outputs

Ngan A.H.W. and Siu K.W., New Dislocation-based Insights into Acoustoplasticity, Keynote Lecture, The 16th International Symposium on Plasticity and Its Current Applications (Plasticity 2012), January 3-8, 2012 at San Juan, Puerto Rico, USA.. 2012.

Siu K.W. and Ngan A.H.W., “New insights on acoustoplasticity: superimposed oscillatory stress enhances dislocation annihilation”, invited talk, International Conference on Processing and Manufacturing of Advanced Materials (THERMEC’2011), Quebec City, Canada, August 1-5, 2011. 2011.

Researcher : Soh AK

Project Title:	International Conference on Materials for Advanced Technologies 2007 Phase field simulation of surface roughening of heteroepitaxial films
Investigator(s):	Soh AK
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	07/2007

Project Title:	Development of nanoscale electro-mechanical coupling theory and functional design of nanoferroelectrics
Investigator(s):	Soh AK
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	03/2010
Completion Date:	02/2012

Project Title:	HKU Overseas Fellowship Awards 2010-11
Investigator(s):	Soh AK
Department:	Mechanical Engg
Source(s) of Funding:	HKU Overseas Fellowship Awards
Start Date:	08/2010

Project Title:	Behavior of constrained ionic polymer gels with coupled large deformation and diffusion
Investigator(s):	Soh AK
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	03/2011
Completion Date:	02/2013

Project Title:	International Conference on Electroceramics (ICE2011) Phase field modeling and molecular dynamics simulations of ferroelectric materials with defects
Investigator(s):	Soh AK
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	12/2011
Completion Date:	12/2011

Project Title:	Thermal Conductivity of carbon nanotube based nanofluids
Investigator(s):	Soh AK
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	05/2012
Completion Date:	03/2013

List of Research Outputs

Guo X., Weng G.J. and Soh A.K., Ductility enhancement of layered stainless steel with nanograined interface layers, Computational Materials Science. 2012, 55: 350-355.

Shi Y. and Soh A.K., Effects of frequency and temperature evolution of polar nanoregions on susceptibility dispersion and polarization mechanism in relaxors, Journal of Applied Physics. 2011, 110(12): 124108.

Shi Y. and Soh A.K., Effects of volume evolution of static and dynamic polar nanoregions on the dielectric behavior of relaxors, Applied Physics Letters. 2011, 99(9): 092908.

Shi Y. and Soh A.K., Modeling of enhanced electrocaloric effect above the Curie temperature in relaxor ferroelectrics, Acta Materialia. 2011, 59(14): 5574-5583.

Su Y., Chen H., Li J.J. and Soh A.K., Effects of surface tension on the size-dependent ferroelectric characteristics of free-standing BaTiO3 nano-thin films, Journal of Applied Physics. 2011, 110(8): 084108.

Zhao X. and Soh A.K., The influence of mechanical and electrical interfacial conditions on threshold field of ferroelectric nanothin films, Functional Materials Letters. 2012, 5(1): UNSP 1250013.

Researcher : Song Y

List of Research Outputs

Song Y. and Shum H.C., Microfluidic Fabrication of Materials by Using All-Aqueous Emulsion as Templates, The 3rd International Conference on Advances in Microfluidics and Nanofluidics (AMN 2012). 2012.

Researcher : Sultana N

List of Research Outputs

Sultana N. and Wang M., Fabrication of tissue engineering scaffolds using the emulsion freezing / freeze-drying technique and characteristics of the scaffolds, In: Edited by Murugan Ramalingam, Ziyad Haidar, Seeram Ramakrishna, Hisatoshi Kobayashi and Youssef Haikel, Integrated Biomaterials for Medical Applications. USA, Wiley-Scrivener Publishing, 2012, Chapter 4: 63-89.

Sultana N. and Wang M., PHBV/PLLA-based composite scaffolds fabricated using an emulsion feezing / freeze-drying technique for bone tissue engineering: Surface modification and in vitro biological evaluation, Biofabrication. UK, Institute of Physics, 2012, 4: 015003 (14pp).

Researcher : Sun H

List of Research Outputs

Sun H., Chen W. and Sze K.Y., A novel finite element method for a class of time fractional diffusion equations (Recipient of MESA Best Student Paper Award), Proceedings of the ASME 2011 International Design Engineering Technical Conferences cum Computers & Information in Engineering Conference. Washington DC, USA, 2011, 8 pages.

Researcher : Sun T

List of Research Outputs

Sun T., Lee W.C. and Wang M., A comparative study of apatite coating and apatite/collagen composite coating fabricated on NiTi SMA through electrochemical deposition, Materials Letters. The Netherlands, Elsevier, 2011, 65: 2575-2577.

Sun T., Wang M., Wang L.P. and Lu W.W., High-performance and multifunctional (Ti, Si, O, N)/Ti coating for the medical application of NiTi shape memory Alloys, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti coatings on NiTi shape memory alloy for medical applications, Materials Science and Engineering C. 2012, 32: 1469-1479.

Sun T., Wang M. and Lee W.C., Surface characteristics, properties and in vitro biological assessment of a NiTi shape memory alloy after high temperature heat treatment or surface H2O2-oxidation: A comparative study, Materials Chemistry and Physics. The Netherlands, Elsevier, 2011, 130: 45-58.

Wang M., Sun T. and Wang L.P., Plasma immersion ion implantation and deposition and its application to form multifunctional biomedical coatings on NiTi shape memory alloy, International Thin Films Workshop: New Frontiers in Thin Film Technology. Sanya, China, 2011, 1pp.

Researcher : Sze KY

Project Title:	Computational methods for meso-electromechanical analysis of ferroelectrics and ferroelectric devices
Investigator(s):	Sze KY
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2001

Project Title:	Development of efficient rotation-free triangles for shell and drape analyses.
Investigator(s):	Sze KY
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2010

List of Research Outputs

Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Fabrication of multi-component tissue-like constructs toward spinal motion segment and intervertebral disc tissue engineering (ID: 3876), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China. 2012, P-SAT-B-207.

Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Fabrication of multi-component tissues for intervertebral disc tissue engineering. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 66.

Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Fabrication of multicomponent tissue-like constructs - Towards spinal motion segment tissue engineering, World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P112.

Leung C.Y., Chik T.K., Sze K.Y., Cheung K.M.C. and Chan B.P., Development of a shear test system for measuring the interfacial strength of osteochondral grafts from rabbits of different skeletal maturity, The Hong Kong Institution of Engineers Transactions. 2011, 19(3): 39-45.

Sun H., Chen W. and Sze K.Y., A novel finite element method for a class of time fractional diffusion equations (Recipient of MESA Best Student Paper Award), Proceedings of the ASME 2011 International Design Engineering Technical Conferences cum Computers & Information in Engineering Conference. Washington DC, USA, 2011, 8 pages.

Sze K.Y., Zhang Q. and Liu G., Hybrid quadrilateral finite element models for axial symmetric Helmholtz problem, Finite Elements in Analysis and Design. 2012, 52: 1-10.

Sze K.Y., Zhang Q. and Liu G., Multi-field three-node triangular finite element models for Helmholtz Problem, Journal of Computational Acoustics. 2011, 19: 317-344.

Sze K.Y. and Wu D., New slave-node constraints and element for adaptive analysis of C⁰ plates, Structural Engineering & Mechanics. 2011, 39: 339-360.

Wu Z., Lo S.H., Sze K.Y. and Chen W.J., A higher order finite element including finite element including transverse normal strain for linear elastic composite plates with general lamination configurations, Finite Elements in Analysis and Design. 2012, 48: 1346-1357.

Zhou Y. and Sze K.Y., A geometric nonlinear rotation-free triangle and its application to drape simulation, International Journal for Numerical Methods in Engineering. 2012, 89: 509-536.

Researcher : Tan ST

Project Title:	Heterogeneous solid modeling using materially defined geometric entities
Investigator(s):	Tan ST
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	04/2005

Project Title:	Adaptive mesh generation for the finite element analysis of heterogeneous objects
Investigator(s):	Tan ST
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2010

Project Title:	Optimized material heterogeneity design using feature tree representation and particle swarm optimization
Investigator(s):	Tan ST
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2010
Completion Date:	08/2011

Project Title:	Visiting Research Professors Scheme 2010-11
Investigator(s):	Tan ST
Department:	Mechanical Engg
Source(s) of Funding:	Visiting Research Professors Scheme
Start Date:	09/2010

Project Title:	Tailoring Material Elasticity by Manipulation of Complex Periodic Microstructures
Investigator(s):	Tan ST
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Researcher : Tang B

Project Title:	Investigation of Biomechanics and Biophysics of White Blood Cell using Optical Tweezer
Investigator(s):	Tang B, Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	03/2010

Project Title:	Investigation of micro/nano biomechanical properties of cornea tissues suffered from different intraocular pressure
Investigator(s):	Tang B
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2010
Completion Date:	08/2011

List of Research Outputs

Leung Y.L., Aladin K.D.M., Lv F., Tam V., Sun Y., Tang B., Ngan A.H.W., Luk K.D.K., Chan D. and Cheung K.M.C., Mesenchymal stromal cells rescue disc degeneration and function via suppression of fibrotic events, Days of Molecular Medicine, AAAS. 2011.

Ngan A.H.W., Tang B., Chan Y.L., Wu K.S. and Zhou Z., "Nanomechanical Characterization of Biological Tissues", Invited Talk,, 4th International Indentation Workshop (IIW4), July 3-8, 2011, Seoul National University, South Korea.. 2011.

Tang B., Aifantis K.E. and Ngan A.H.W., Elastic modulus of nanostructured polymer surfaces, Materials Letters. Elsevier, 2011, 67: 237-240.

Wen C., Wu C.B.B., Tang B., Wang T., Yan C.H., Lu W.W., Hu Y., Pan H. and Chiu P.K.Y., Collagen Fibril Stiffening in Osteoarthritic Cartilage of Human Beings Revealed by Atomic Force Microscopy, Osteoarthritis Cartilage. 2012.

Researcher : Teng WK

List of Research Outputs

Chik T.K., Choy T.H.A., Teng W.K., Ma X.Y., Li Y.Y., Leung Y.L., Cheung K.M.C. and Chan B.P., Developing a photochemically crosslinked collagen plug to solve the cell leakage problem for intra-discal injection of mesenchymal stem cells: A pilot study., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P117.

Li Y.Y., Cheng H.W., Chan P.M., Wong M.Y., Teng W.K., Chow S.T., Cheung K.M.C., Chan D. and Chan B.P., Collagen-mesenchymal stem cell microspheres for the repair of articular cartilage defects in a rabbit model., Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 86.

Researcher : Tong HW

Project Title:	An investigation into coaxial electrospinning for forming biomolecule delivering tissue engineering scaffolds
Investigator(s):	Tong HW, Wang M
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	02/2011
Completion Date:	07/2012

Project Title:	The 9th World Biomaterials Congress (WBC) Nanofibrous Gelatin Tissue Engineering Scaffolds: Solvent-free Electrospinning and Crosslinking of Gelatin Fibers by Genipin A Novel Electrospinning Technique for Fabricating 3D Tissue Engineering Scaffolds and Highly-aligned Fibrous Structures Developing Negatively Charged Nanofibrous Scaffolds via Electrospinning for Tissue Engineering Applications
Investigator(s):	Tong HW
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2012
Completion Date:	10/2010

List of Research Outputs

Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti coatings on NiTi shape memory alloy for medical applications, Materials Science and Engineering C. 2012, 32: 1469-1479.

Tong H.W., Zhang X. and Wang M., A new nanofiber fabrication technique based on coaxial electrospinning, Materials Letters. 2011, 66: 257-260.

Tong H.W. and Wang M., A novel electrospinning technique for fabricating 3D tissue engineering scaffolds and highly-aligned fibrous structures, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Tong H.W. and Wang M., Developing negatively charged nanofibrous scaffolds via electrospinning for tissue engineering applications, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Tong H.W. and Wang M., Electrospinning of nanocomposite scaffolds for bone Tissue engineering: Emitting electrode polarity and charge retention, Proceedings of the 36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’12). Daytona Beach, FL, USA, 2012, 1pp.

Tong H.W., Zhang X. and Wang M., Electrospinning of nanofibrous tissue engineering scaffolds: A comparative study, Proceedings of the 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Tong H.W. and Wang M., Electrospinning of poly(hydroxybutyrate-co-hydroxyvalerate) fibrous scaffolds for tissue engineering applications: Effects of eectrospinning parameters and solution properties, Journal of Macromolecular Science Part B: Physics. USA, Taylor & Francis, 2011, 50: 1535-1558.

Tong H.W., Wang M., Li Z.Y. and Lu W.W., Electrospinning, characterization and in vitro biological evaluation of nanocomposite fibers containing carbonated hydroxyapatite nanoparticles, Highlights of 2010 in journal Biomedical Materials (2011). UK, 2011, 5: 054111, 13pp.

Tong H.W., Wang M. and Lu W.W., Electrospun poly(hydroxybutyrate-co-hydroxyvalerate) fibrous membranes consisting of parallel-aligned fibers and cross-aigned fibers: Characterization and biological evaluation, Journal of Biomaterials Science – Polymer Edition. USA, Taylor & Francis, 2011, 22: 2475-2497.

Tong H.W. and Wang M., Nanofibrous gelatin tissue engineering scaffolds: Solvent-free electrospinning and crosslinking of gelatin fibers by genipin, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Tong H.W. and Wang M., Negative voltage electrospinning and positive voltage electrospinning of tissue engineering scaffolds: a comparative study and charge retention on scaffolds, Nano LIFE. 2012, 2: 1250004.

Tong H.W. and Wang M., Negative voltage electrospinning of nanocomposite fibrous scaffolds for bone tissue engineering, Journal of the Australian Ceramic Society. Australia, Australian Ceramic Society, 2012, 48: 38-43.

Researcher : Tong YO

List of Research Outputs

Tong Y.O., Statistical Analysis of Air Pollutants and Numerical Modeling of Reactive Pollutant Dispersion Within Street Canyon, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-306.

Researcher : Tsang ACH

List of Research Outputs

Tsang A.C.H., Dynamics of Waves and Patterns of the Complex Ginzburg Landau and Soliton Management Models: Localized Gain and Effects of Inhomogeneity, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-204.

Tsang A.C.H., Malomed B.A. and Chow K.W., Multistable dissipative structures pinned to dual hot spots, Physical Review E. American Physical Society, 2011, 84: 066609-1 to 066609-11.

Researcher : Wan IC

List of Research Outputs

Ip R.W.L. and Wan I.C., Development of nonlinear analytical models for the study of heat/mass transfer properties in the drying of porous type fabric, Defect and Diffusion Forum, Diffusion in Solids and Liquids VII. Switzerland, Trans Tech Publications, 2012, 326 - 328: 593 - 598.

Wan I.C., Investigate the Dry and Moist Heat Process for the Design of Industrial Drying Machniery for Dye-houses, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-174.

Researcher : Wan IC

List of Research Outputs

Wan I.C., Investigate the Dry and Moist Heat Process for the Design of Industrial Drying Machniery for Dye-houses, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-174.

Researcher : Wang C

Project Title:	Hybrid Control Technology for Low Frequency Noise Attenuation
Investigator(s):	Wang C, Huang L
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	11/2010
Completion Date:	10/2011

List of Research Outputs

Cheung S.C., Wang C. and Huang L., Numerical study on scattering and absorption by periodically arranged acoustical treatment at oblique incidence., Acoustics Hong Kong 2012, 13-18 May 2012 (abstract book published as a special issue of Journal of the Acoustical Society of America). 2012, 131(4), Pt. 2: 3300-3300.

Wang C., Wang M. and Yuan X.Y., Controlled dual delivery of growth factors via electrospun nanofibrous bicomponent vehicles, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Wang C., Tong S.N., Tsz Y.H. and Wang M., Conventional electrospinning vs. emulsion electrospinning: a comparative study on the development of nanofibrous drug/biomolecule delivery vehicles, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011, 1pp.

Wang C., Tong S.N., Tse Y.H. and Wang M., Conventional electrospinning vs. emulsion electrospinning: a comparative study on the development of nanofibrous drug/biomolecule delivery vehicles, Advanced Materials Research. Switzerland, Trans Tech Publications, 2012, 410: 118-121.

Wang C., Tong S.N., Tse Y.H. and Wang M., Conventional electrospinning vs. emulsion electrospinning: a comparative study on the development of nanofibrous drug/biomolecule delivery vehicles, Best Student Paper Award at the 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XX). Hong Kong, 2011, 1pp.

Wang C., Wang M. and Yuan X.Y., Dual-source dual-power electrospinning of multifunctional scaffolds for bone tissue engineering: Scaffold fabrication and evaluation, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Wang C. and Wang M., Electrospinning and characteristics of bicomponent bone tissue engineering scaffolds, Proceedings of the International Conference on Materials for Advanced Technologies 2011 (ICMAT 2011). Singapore, 2011, 1pp.

Wang C. and Wang M., Emulsion electrospinning of nanofibrous delivery vehicles for the controlled release of biomolecules and the in vitro release behaviour of biomolecules, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011, 1pp.

Wang C. and Wang M., Emulsion electrospinning of nanofibrous delivery vehicles for the controlled release of biomolecules and the in vitro release behaviour of biomolecules, Advanced Materials Research. Switzerland, Trans Tech Publications, 2012, 410: 98-101.

Wang C., Wang M. and Yuan X.Y., Nanofibrous delivery vehicles for drugs and biomolecules: Emulsion electrospinning vs. conventional electrospinning, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Wang C., Wang M. and Yuan X.Y., Novel electrospun bicomponent scaffolds for bone tissue engineering: Fabrication, characterization and sustained release of growth factor, Materials Research Society Fall Meeting. Boston, USA, 2011, 1pp.

Wang C. and Huang L., On the acoustic properties of parallel arrangement of multiple micro-perforated panel absorbers with different cavity depths, Journal of the Acoustical Society of America. Acoustical Society of America, 2011, 130: 208-218.

Wang C. and Wang M., Osteoinductive and osteoconductive bone tissue engineering scaffolds formed through dual-source dual-power electrospinning, Proceedings of the 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Zhang X., Wang C., Kang J. and Wang M., Morphological and structural control of electrospun PLLA nanofibers: Influence of electrospinning techniques and parameters, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Researcher : Wang C

List of Research Outputs

Wang C., Tong S.N., Tse Y.H. and Wang M., Conventional electrospinning vs. emulsion electrospinning: a comparative study on the development of nanofibrous drug/biomolecule delivery vehicles, Best Student Paper Award at the 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XX). Hong Kong, 2011, 1pp.

Wang C. and Wang M., Emulsion electrospinning of nanofibrous delivery vehicles for the controlled release of biomolecules and the in vitro release behaviour of biomolecules, Advanced Materials Research. Switzerland, Trans Tech Publications, 2012, 410: 98-101.

Researcher : Wang H

Project Title:	Pump-free microfluidic aluminium-air cell as an on-chip power source
Investigator(s):	Wang H, Leung YC
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	06/2012

List of Research Outputs

Leung Y.C. and Wang H., Aluminum and its alloy: is it a sustainable and feasible energy carrier?, 8th APCSEET 2011. Adelaide, Australia, Abstract book.

Wang H., Electrochemical Conversion of Aluminum Energy: Energy Efficiency, Co-production Concept and System Characteristics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-173.

Wang H., Leung Y.C. and Leung M.K.H., Energy analysis of hydrogen and electricity production from aluminum-based processes, Applied Energy. UK, Elsevier, 2012, 90: 100-105.

Wang H., Leung Y.C. and Xuan J., Modeling of a micro auto-electrolytic cell for hydrogen production, International Journal of Hydrogen Energy. 2012, 37: 10002-10009.

Wang H., Leung Y.C. and Xuan J., Modeling of a microfludic electrochemical cell for CO₂ utilization, Proceedings of the Advanced Electrochemical Energy Symposum AEES. 2011, Abstract: 1pp.

Wang H., Leung Y.C. and Xuan J., Modeling of an air cathode for microfluidic fuel cells: Transport and polarization behaviors, International Journal of Hydrogen Energy. 2011, 36: 14704-14718.

Xuan J., Leung Y.C., Leung M.K.H., Ni M. and Wang H., A computational study of bifunctional oxygen electrode in air-breathing reversible microfluidic fuel cells, International Journal of Hydrogen Energy. UK, Elsevier, 2011, 36: 9231-9241.

Xuan J., Leung Y.C. and Wang H., Air: breathing membraneless laminar flow-based fuel cells: Can they breathe enough air?, Proceedings of the Advanced Electrochemical Energy Symposium AEES. 2011, Abstract: 1pp.

Xuan J., Leung Y.C., Leung M.K.H., Wang H. and Ni M., Chaotic flow-based fuel cell built on counter-flow microfluidic network: predicting the over-limiting current behaviour, Journal of Power Sources. UK, Elsevier, 2011, 196: 9391-9397.

Xuan J., Leung Y.C., Leung M.K.H., Ni M. and Wang H., Chemical & transport behaviors in a microfludic reformer with catalytic-support membrane for efficient hydrogen production & purification, International Journal of Hydrogen Energy. USA, Elsevier, 2012, 37: 2614-2622.

Xuan J., Leung Y.C., Leung M.K.H., Ni M. and Wang H., Hydrodynamic focusing in microfluidic membraneless fuel cells: breaking the trade-off between fuel utilization and current density, International Journal of Hydrogen Energy. UK, Elsever, 2011, 36: 11075-11084.

Xuan J., Leung M.K.H., Leung Y.C. and Wang H., Laminar flow-based fuel cell working under critical conditions: the effect of parasitic current, Applied Energy. UK, Elsevier, 2012, 90: 87-93.

Researcher : Wang H

List of Research Outputs

Leung Y.C. and Wang H., Aluminum and its alloy: is it a sustainable and feasible energy carrier?, 8th APCSEET 2011. Adelaide, Australia, Abstract book.

Wang H., Electrochemical Conversion of Aluminum Energy: Energy Efficiency, Co-production Concept and System Characteristics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-173.

Wang H., Leung Y.C. and Leung M.K.H., Energy analysis of hydrogen and electricity production from aluminum-based processes, Applied Energy. UK, Elsevier, 2012, 90: 100-105.

Wang H., Leung Y.C. and Xuan J., Modeling of a micro auto-electrolytic cell for hydrogen production, International Journal of Hydrogen Energy. 2012, 37: 10002-10009.

Wang H., Leung Y.C. and Xuan J., Modeling of a microfludic electrochemical cell for CO₂ utilization, Proceedings of the Advanced Electrochemical Energy Symposum AEES. 2011, Abstract: 1pp.

Wang H., Leung Y.C. and Xuan J., Modeling of an air cathode for microfluidic fuel cells: Transport and polarization behaviors, International Journal of Hydrogen Energy. 2011, 36: 14704-14718.

Xuan J., Leung M.K.H., Leung Y.C. and Wang H., Laminar flow-based fuel cell working under critical conditions: the effect of parasitic current, Applied Energy. UK, Elsevier, 2012, 90: 87-93.

Researcher : Wang L

Project Title:	Microfluidic Nanofluids: Synthesis and Characterization
Investigator(s):	Wang L
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2010

Project Title:	Constructal Design of Nanofluids
Investigator(s):	Wang L
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	03/2010
Completion Date:	03/2012

Project Title:	Nanofluids: Synthesis inside Microfluidic Droplets, Thermal Waves and Constructal Design
Investigator(s):	Wang L
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2010
Completion Date:	08/2011

Project Title:	Smart and High-Conductive Nanofluids
Investigator(s):	Wang L
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2012

Project Title:	3rd Micro/Nanoscale Heat & Mass Transfer International Conference Engineering Nanofluids with Microfluidic Technique
Investigator(s):	Wang L
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	03/2012
Completion Date:	03/2012

Project Title:	Nanofluids: Thermal Waves
Investigator(s):	Wang L
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	06/2012

Researcher : Wang L

List of Research Outputs

Wang W., Wang L., Liu F., Yan F., Johnston S. and Al-Jassim M., Silicon Grain Boundary Passivation for Photovoltaics: A Novel Approach with Small Polar Molecules, Proc. of The 37th IEEE Photovoltaic Specialists Conference. 2012.

Researcher : Wang M

Project Title:	Bioactive and biodegradable composites for bone tissue repair
Investigator(s):	Wang M, Lu WW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	12/2005

Project Title:	Compostie tssue engineering scaffolds and the synergetic effects of simultaneous controlled release of several bioactive substances
Investigator(s):	Wang M
Department:	Mechanical Engg
Source(s) of Funding:	Matching Fund for NSFC Academic Collaboration Award
Start Date:	01/2009

Project Title:	Electrospinning for Tissue Engineering Scaffolds: Effects of Emitting Electrode Polarity and Formation of Highly Aligned Fibrous Structures
Investigator(s):	Wang M, Lu WW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2009
Completion Date:	12/2011

Project Title:	Emulsion Electrospinning and Formation of Bicomponent Fibrous Scaffolds for the Dual Growth Factor Delivery in Tissue Engineering
Investigator(s):	Wang M
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	12/2009

Project Title:	Gold Nanoparticles and their Functionalization for Biomedical Applications
Investigator(s):	Wang M
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	04/2010
Completion Date:	09/2011

Project Title:	Developing Novel Bioactive and High Performance Composite Coatings for the Medical Application of NiTi Shape Memory Alloy
Investigator(s):	Wang M
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2010
Completion Date:	08/2011

Project Title:	An Investigation into the Fabrication and Properties of Layered Scaffolds for Osteochondral Tissue Engineering
Investigator(s):	Wang M
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	04/2011

Project Title:	Novel and Multifunctional Composite Coatings for the Medical Application of NiTi Shape Memory Alloy
Investigator(s):	Wang M
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’12) Electrospinning and Electrospun Fibrous Structures for Medical Applications
Investigator(s):	Wang M
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	01/2012
Completion Date:	01/2012

Project Title:	An Investigation into Multifunctional Coatings Formed on Porous Metals by Electrophoretic Deposition
Investigator(s):	Wang M
Department:	Mechanical Engg
Source(s) of Funding:	Seed Funding Programme for Basic Research
Start Date:	05/2012

List of Research Outputs

Duan B. and Wang M., Customized nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering, In: Edited by Gilson Khang, Handbook of Intelligent Scaffold for Regenerative Medicine. Singapore, Pan Stanford Publishing, 2011, 925-953.

Duan B., Wang M. and Lu W.W., Nanocomposite scaffolds for bone tissue engineering: design, advanced fabrication and biological evaluation, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Duan B., Wang M., Zhou W. and Cheung W.L., Nonisothermal melt-crystallization behavior of Ca-P/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanocomposite microspheres, Polymer Engineering and Science. USA, Wiley, 2011, 51: 1580-1591.

Duan B., Wang M. and Lu W.W., Selective laser sintered Ca-P/PHBV nanocomposite scaffolds with sustained release of rhBMP-2 for bone tissue engineering, Best Paper Award at the 35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’11). Daytona Beach, FL, USA, 2011.

Duan B. and Wang M., Selective laser sintering and its application in biomedical engineering, MRS Bulletin. USA, Materials Research Society, 2011, 36: 998-1005.

Duan B., Wang M. and Lu W.W., Three-dimensional nanocomposite scaffolds for bone tissue engineering: From design to application, Nano LIFE. Singapore, World Scientific, 2012, 2: 1250005 (14pp).

Gong C., Lee W.C. and Wang M., Forming bioactive apatite coating on anodically oxidized NiTi shape memory alloy through electrochemical deposition, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Gong C., Lee W.C. and Wang M., Titanium dioxide layer on NiTi shape memory alloy through anodic oxidation: Fabrication and characteristics, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Lee W.C. and Wang M., Antibiotics-incorporated apatite and apatite/collagen catings on NiTi shape memory alloy formed by electrochemical deposition, 36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’12). Daytona Beach, FL, USA, 2012, 1pp.

Lee W.C. and Wang M., Antibiotics-incorporated apatite and apatite/collagen coatings on NiTi shape memory alloy formed by electrochemical deposition, Proceedings of the 36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’12). Daytona Beach, FL, USA, 2012, 1pp.

Lee W.C. and Wang M., Apatite coating and apatite/collagen composite coating on NiTi shape memory alloy formed through electrochemical deposition: A comparative study, Proceedings of the 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Lee W.C. and Wang M., Incorporation and in vitro release of antibiotics from apatite coatings produced by electrochemical deposition on NiTi shape memory alloy, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Lee W.C. and Wang M., Synthesis of antibiotics-loaded apatite/collagen composite coatings on NiTi shape memory alloy and in vitro release behaviours of antibiotics, Proceedings of the 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Li S. and Wang M., A new multifunctional nanodevice based on Au-Ag bimetallic nanoparticles for cancer detection and treatment, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Li S. and Wang M., A novel SERS-active tag based on bimetallic flowerlike Au-Ag nanoparticles, Current Nanoscience. USA, Bentham Science, 2011, 7: 969-978.

Li S. and Wang M., Branched metal nanoparticles: A review on wet-chemical syntheses and biomedical applications, Nano LIFE. Singapore, World Scientific, 2012, 2: 1230002 (22pp).

Li S. and Wang M., Folic Acid-Chitosan@Gold nanocomposite for potential diagnostic and therapeutic applications, Bionano@Nice-2011 Student/post-doctoral Travel Award at the 2011 Spring Meeting of the European Materials Research Society. Nice, France, 2011, 1pp.

Li S. and Wang M., Green synthesis of gold nanoparticles and their use in forming SERS-active nanodevices, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Li S., Ren L. and Wang M., Multifunctional nanodevices based on polymer-metal hybrid nanoparticles for cancer detection and treatment, Best Presentation Award at the 9th China-Korea Symposium on Biomaterials and Nano-Biotechnology. Sanya, China, 2011, 1pp.

Li S., Ren L. and Wang M., Multifunctional nanodevices based on polymer-metal hybrid nanoparticles for cancer detection and treatment, Proceedings of the 9th China-Korea Symposium on Biomaterials and Nano-Biotechnology. Sanya, China, 2011, 1pp.

Li S. and Wang M., Synthesis and characteristics of drug-loaded core-shell structured PLGA-Ag nanoparticles, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Li S. and Wang M., Synthesis and characteristics of multifunctional SERS tags based on Au-Ag bimetallic nanoparticles, Materials Research Society Fall Meeting. Boston, USA, 2011, 1pp.

Sultana N. and Wang M., Fabrication of tissue engineering scaffolds using the emulsion freezing / freeze-drying technique and characteristics of the scaffolds, In: Edited by Murugan Ramalingam, Ziyad Haidar, Seeram Ramakrishna, Hisatoshi Kobayashi and Youssef Haikel, Integrated Biomaterials for Medical Applications. USA, Wiley-Scrivener Publishing, 2012, Chapter 4: 63-89.

Sultana N. and Wang M., PHBV/PLLA-based composite scaffolds fabricated using an emulsion feezing / freeze-drying technique for bone tissue engineering: Surface modification and in vitro biological evaluation, Biofabrication. UK, Institute of Physics, 2012, 4: 015003 (14pp).

Sun T., Lee W.C. and Wang M., A comparative study of apatite coating and apatite/collagen composite coating fabricated on NiTi SMA through electrochemical deposition, Materials Letters. The Netherlands, Elsevier, 2011, 65: 2575-2577.

Sun T., Wang M., Wang L.P. and Lu W.W., High-performance and multifunctional (Ti, Si, O, N)/Ti coating for the medical application of NiTi shape memory Alloys, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti coatings on NiTi shape memory alloy for medical applications, Materials Science and Engineering C. 2012, 32: 1469-1479.

Sun T., Wang M. and Lee W.C., Surface characteristics, properties and in vitro biological assessment of a NiTi shape memory alloy after high temperature heat treatment or surface H2O2-oxidation: A comparative study, Materials Chemistry and Physics. The Netherlands, Elsevier, 2011, 130: 45-58.

Tang G., Zhang H., Zhao Y., Li X., Yuan X. and Wang M., Prolonged release from PLGA/HAp scaffolds containing drug-loaded PLGA/Gelatin composite microspheres, Journal of Materials Science: Materials in Medicine. Germany, Springer, 2012, 23: 419-429.

Tong H.W., Zhang X. and Wang M., A new nanofiber fabrication technique based on coaxial electrospinning, Materials Letters. 2011, 66: 257-260.

Tong H.W. and Wang M., A novel electrospinning technique for fabricating 3D tissue engineering scaffolds and highly-aligned fibrous structures, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Tong H.W. and Wang M., Developing negatively charged nanofibrous scaffolds via electrospinning for tissue engineering applications, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Tong H.W. and Wang M., Electrospinning of nanocomposite scaffolds for bone Tissue engineering: Emitting electrode polarity and charge retention, Proceedings of the 36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’12). Daytona Beach, FL, USA, 2012, 1pp.

Tong H.W., Zhang X. and Wang M., Electrospinning of nanofibrous tissue engineering scaffolds: A comparative study, Proceedings of the 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Tong H.W. and Wang M., Electrospinning of poly(hydroxybutyrate-co-hydroxyvalerate) fibrous scaffolds for tissue engineering applications: Effects of eectrospinning parameters and solution properties, Journal of Macromolecular Science Part B: Physics. USA, Taylor & Francis, 2011, 50: 1535-1558.

Tong H.W., Wang M., Li Z.Y. and Lu W.W., Electrospinning, characterization and in vitro biological evaluation of nanocomposite fibers containing carbonated hydroxyapatite nanoparticles, Highlights of 2010 in journal Biomedical Materials (2011). UK, 2011, 5: 054111, 13pp.

Tong H.W., Wang M. and Lu W.W., Electrospun poly(hydroxybutyrate-co-hydroxyvalerate) fibrous membranes consisting of parallel-aligned fibers and cross-aigned fibers: Characterization and biological evaluation, Journal of Biomaterials Science – Polymer Edition. USA, Taylor & Francis, 2011, 22: 2475-2497.

Tong H.W. and Wang M., Nanofibrous gelatin tissue engineering scaffolds: Solvent-free electrospinning and crosslinking of gelatin fibers by genipin, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Tong H.W. and Wang M., Negative voltage electrospinning and positive voltage electrospinning of tissue engineering scaffolds: a comparative study and charge retention on scaffolds, Nano LIFE. 2012, 2: 1250004.

Tong H.W. and Wang M., Negative voltage electrospinning of nanocomposite fibrous scaffolds for bone tissue engineering, Journal of the Australian Ceramic Society. Australia, Australian Ceramic Society, 2012, 48: 38-43.

Wang C., Wang M. and Yuan X.Y., Controlled dual delivery of growth factors via electrospun nanofibrous bicomponent vehicles, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Wang C., Tong S.N., Tsz Y.H. and Wang M., Conventional electrospinning vs. emulsion electrospinning: a comparative study on the development of nanofibrous drug/biomolecule delivery vehicles, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011, 1pp.

Wang C., Tong S.N., Tse Y.H. and Wang M., Conventional electrospinning vs. emulsion electrospinning: a comparative study on the development of nanofibrous drug/biomolecule delivery vehicles, Advanced Materials Research. Switzerland, Trans Tech Publications, 2012, 410: 118-121.

Wang C., Tong S.N., Tse Y.H. and Wang M., Conventional electrospinning vs. emulsion electrospinning: a comparative study on the development of nanofibrous drug/biomolecule delivery vehicles, Best Student Paper Award at the 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XX). Hong Kong, 2011, 1pp.

Wang C., Wang M. and Yuan X.Y., Dual-source dual-power electrospinning of multifunctional scaffolds for bone tissue engineering: Scaffold fabrication and evaluation, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Wang C. and Wang M., Electrospinning and characteristics of bicomponent bone tissue engineering scaffolds, Proceedings of the International Conference on Materials for Advanced Technologies 2011 (ICMAT 2011). Singapore, 2011, 1pp.

Wang C. and Wang M., Emulsion electrospinning of nanofibrous delivery vehicles for the controlled release of biomolecules and the in vitro release behaviour of biomolecules, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011, 1pp.

Wang C. and Wang M., Emulsion electrospinning of nanofibrous delivery vehicles for the controlled release of biomolecules and the in vitro release behaviour of biomolecules, Advanced Materials Research. Switzerland, Trans Tech Publications, 2012, 410: 98-101.

Wang C., Wang M. and Yuan X.Y., Nanofibrous delivery vehicles for drugs and biomolecules: Emulsion electrospinning vs. conventional electrospinning, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Wang C., Wang M. and Yuan X.Y., Novel electrospun bicomponent scaffolds for bone tissue engineering: Fabrication, characterization and sustained release of growth factor, Materials Research Society Fall Meeting. Boston, USA, 2011, 1pp.

Wang C. and Wang M., Osteoinductive and osteoconductive bone tissue engineering scaffolds formed through dual-source dual-power electrospinning, Proceedings of the 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Wang M., Advances in surface modification of biomaterials: Technologies and applications, Proceedings of the 3rd Asian Biomaterials Congress. Busan, Korea, 2011, 1pp.

Wang M., Advances in surface modification of biomaterials: technologies and applications, 3rd Asian Biomaterials Congress. Busan, Korea, 2011, 1pp.

Wang M., Associate Editor (2011 – Present), Bioceramics Development and Applications . Belgium, Ashdin Publishing, 2011.

Wang M., Associate Editor (2012 – Present), Nano LIFE. 2012.

Wang M., Editor (2007 – Present), Journal of Biomimetics, Biomaterials and Tissue Engineering. Switzerland, TransTech Publications, 2012.

Wang M., Editor (2012 – Present), Materials Letters. The Netherlands, Elsevier, 2012.

Wang M. and Narayan R., Editorial: Biomaterials and tissue engineering, Nano LIFE. Singapore, World Scientific, 2012, 2: 1202001 (4pp).

Wang M., Electrospinning and electrospun fibrous structures for biomedical applications, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011, 1pp.

Wang M., Electrospinning and electrospun fibrous structures for biomedical applications, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011.

Wang M., Electrospinning and electrospun fibrous structures for medical applications, 36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’12). Daytona Beach, FL, USA, 2012, 1pp.

Wang M., Electrospinning and electrospun fibrous structures for medical applications, Proceedings of the 36th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’12). Daytona Beach, FL, USA, 2012, 1pp.

Wang M., Electrospinning and electrospun fibrous structures for tissue engineering applications, 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Wang M., Electrospinning and electrospun fibrous structures for tissue engineering applications, Proceedings of the 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Wang M., Electrospun fibers for tissue engineering and controlled release applications, 9th China-Korea Symposium on Biomaterials and Nano-Biotechnology, Sanya. Sanya, China, 2011, 1pp.

Wang M., Electrospun fibers for tissue engineering and controlled release applications, Proceedings of the 9th China-Korea Symposium on Biomaterials and Nano-Biotechnology. Sanya, China, 2011, 1pp.

Wang M., Fellow of Biomaterials Science and Engineering (FBSE), International Union of Societies for Biomaterials Science and Engineering (IUSBSE). 2012.

Wang M., Fellow of the American Institute for Medical and Biological Engineering (FAIMBE), American Institute for Medical and Biological Engineering. Washington, DC, USA, 2012.

Wang M., Guest Editor, Thematic Issue on Biomaterials and Tissue Engineering, Nano LIFE. 2011, 2: No. 1.

Wang M., Member (2004 - Present) of the Editorial Board, Journal of Materials Science: Materials in Medicine. Germany, Springer, 2011.

Wang M., Member (2004 - Present) of the Editorial Board, Surface and Coatings Technology. The Netherlands, Elsevier, 2011.

Wang M., Member (2006 – 2012) of the Editorial Board, Biomedical Materials: Materials for Tissue Engineering & Regenerative Medicine. UK, Institute of Physics, 2011.

Wang M., Member (2006 – Present) of the Editorial Board, Composites Science and Technology . The Netherlands, Elsevier, 2011.

Wang M., Member (2007 – Present) of the Editorial Board, Frontiers of Materials Science. Germany, Higher Education Press, China, and Springer, 2011.

Wang M., Member (2007 – Present) of the Editorial Board, IET Nanobiotechnology. UK, Institution of Engineering and Technology, 2011.

Wang M., Member (2010 – Present) of the Editorial Board, Journal of the Royal Society Interface . London, UK, The Royal Society, 2012.

Wang M., Multifunctional thin coatings cormed on NiTi shape memory alloy through plasma immersion ion implantation and deposition (PIIID), Materials Research Society Fall Meeting. Boston, USA, 2011, 1pp.

Wang M., Multifunctional thin coatings formed on NiTi shape memory alloy through plasma immersion ion implantation and deposition (PIIID), Materials Research Society Fall Meeting. Boston, USA, 2011, 1pp.

Wang M., Nano-biomaterials, IUMRS International Conference in Asia (IUMRS-ICA). Taipei, Taiwan, 2011, 1pp.

Wang M., Nano-biomaterials, Proceedings of the IUMRS International Conference in Asia (IUMRS-ICA) 2011. Taipei, Taiwan, 1pp.

Wang M., Nanocomposites for hard tissue regeneration, International Forum of Biomedical Materials: Nanomaterials for Tissue Regeneration. Hangzhou, China, 2012, 1pp.

Wang M., Nanocomposites for hard tissue regeneration, Proceedings of the International Forum of Biomedical Materials: Nanomaterials for Tissue Regeneration. Hangzhou, China, 2012, 1pp.

Wang M., Novel electrospun bicomponent scaffolds for bone tissue engineering: Fabrication, characterization and sustained release of growth factor, Materials Research Society Fall Meeting. Boston, USA, 2011, 1pp.

Wang M., Plasma immersion ion implantation and deposition and its application to form multifunctional biomedical coatings on NiTi shape memory alloy, International Thin Films Workshop: New Frontiers in Thin Film Technology. Sanya, China, 2011, 1pp.

Wang M., Sun T. and Wang L.P., Plasma immersion ion implantation and deposition and its application to form multifunctional biomedical coatings on NiTi shape memory alloy, International Thin Films Workshop: New Frontiers in Thin Film Technology. Sanya, China, 2011, 1pp.

Wang M., Regional Editor (2011 – Present), Journal of Biomaterials and Tissue Engineering. USA, American Scientific Publishers, 2011.

Wang M., Selective laser sintered nanocomposite scaffolds for bone tissue engineering, International Conference on Materials for Advanced Technologies 2011 (ICMAT 2011). Singapore, 2011, 1pp.

Wang M., Selective laser sintered nanocomposite scaffolds for bone tissue engineering, Proceedings of the International Conference on Materials for Advanced Technologies 2011 (ICMAT 2011). Singapore, 2011, 1pp.

Wang M., Series Editor (2012 – Present), Springer Series in Biomaterials Science and Engineering . Germany, Springer, 2012.

Wang M., Technical Committee Member (2006 - Present), International Organization for Standardization (TC150 Implants for surgery). 2012.

Wang M., Technical Committee Member (2006 - Present), International Organization for Standardization (TC194 Biological evaluation of medical devices). 2012.

Wang M., Technical Committee Member (2006 - Present), International Organization for Standardization (TC229 Nanotechnologies). 2012.

Zhang X., Wang M., Yuan X.Y. and Kang J., A comparative study on conventional electrospinning and emulsion electrospinning of PLLA nanofibers, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011, 1pp.

Zhang X., Wang M., Yuan X.Y. and Kang J., A comparative study on conventional electrospinning and emulsion electrospinning of PLLA nanofibers, Advanced Materials Research. Switzerland, Trans Tech Publications, 2012, 410: 390-393.

Zhang X. and Wang M., Dual delivery of growth factors form electrospun bicomponent scaffolds for neural tissue engineering, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Zhang X. and Wang M., Effects of emulsion electrospinning parameters on the morphology and structure of core-shell structured PLLA fibers, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011, 1pp.

Zhang X. and Wang M., Effects of emulsion electrospinning parameters on the morphology and structure of core-shell structured PLLA fibers, Advanced Materials Research. Switzerland, Trans Tech Publications, 2012, 410: 386-389.

Zhang X. and Wang M., Emulsion electrospinning of PLLA nanofibrous scaffolds for delivery biomolecules, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Zhang X., Wang C., Kang J. and Wang M., Morphological and structural control of electrospun PLLA nanofibers: Influence of electrospinning techniques and parameters, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Researcher : Wang S

List of Research Outputs

Wang S., Ngan A.H.W. and Ng K.Y., Anomalous load dependence in single-asperity tribological behaviour of anodic aluminium oxide nanohoneycombs, Scripta Materialia. Elsevier, 2012, 67: 360-363.

Researcher : Wang W

List of Research Outputs

Wang W., Wang L., Liu F., Yan F., Johnston S. and Al-Jassim M., Silicon Grain Boundary Passivation for Photovoltaics: A Novel Approach with Small Polar Molecules, Proc. of The 37th IEEE Photovoltaic Specialists Conference. 2012.

Researcher : Wong CC

List of Research Outputs

Leung K.K., Wong C.C., Liu C.H., Ng G.C.T. and Lo J.C.Y., On the spatial behaviors of local mass transfer coefficients over idealized two-dimensional urban street canyons, Croucher Advanced Study Institute 2011-2012, Urban Climatology for Tropical and Sub-Tropical Regions, December 5 to 10, 2011, School of Architecture, The Chinese University of Hong Kong, Hong Kong. 2011.

Liu C.H., Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hong Kong Electric Co. Ltd., 2012.

Liu C.H., Cheng W.C., Chung N.H., Wong C.C. and Leung K.K., On the Mechanism of Pollutant Removal from Two-Dimensional Idealized Urban Street Canyons, International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hong Kong Electric Co. Ltd., 2012.

Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hongkong Electric Co. Ltd., 2012.

Wong C.C. and Liu C.H., Large-Eddy Simulation of Pollutant Dispersion over Two-Dimensional Idealized Street Canyons, International Workshop on Urban Weather and Climate Observation and Modeling, July 12-15, 2011, Beijing, China. 2011.

Wong C.C. and Liu C.H., Plume dispersion over two-dimensional urban roughness: an LES approach, Croucher Advanced Study Institute 2011-2012, Urban Climatology on Tropical and Sub-Tropical Regions, December 5 to 10, 2011, School of Architecture, The Chinese University of Hong Kong, Hong Kong.. 2011.

Wong C.C. and Liu C.H., Pollutant dispersion over two-dimensional idealized street canyons: a Large-eddy simulation approach, HARMO14 ‐ 14th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes Kos Island, Greece, October 2 to 6, 2011.

Wong C.C. and Liu C.H., Pollutant removal, dispersion, and entrainment over 2D idealized street canyons, 13th International Conference on Wind Engineering (ICWE13), July 10 to 15, 2011, Amsterdam, The Netherlands . 2011.

Wong C.C. and Liu C.H., Turbulent plume dispersion over two-dimensional idealized urban street canyons, European Geosciences Union General Assembly 2012, April 22 to 27, 2012, Vienna, Austria. 2012.

Researcher : Wong CC

List of Research Outputs

Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hong Kong Electric Co. Ltd., 2012.

Wong C.C. and Leung K.K., Final Report on Contract No. 12/2701 Eastern District Compact Zone Substation CFD Analysis on Air Ventilation Assessment for The Hongkong Electric Co. Ltd., 2012.

Researcher : Wong HL

List of Research Outputs

Wong M.Y., Wong H.L., Chan S., Chan G.C.F. and Chan B.P., Regulation of migration characteristics of human mesenchymal stem cells (hMSCs) by encapsulation in collagen matrix. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 182.

Researcher : Wong MY

List of Research Outputs

Li Y.Y., Cheng H.W., Chan P.M., Wong M.Y., Teng W.K., Chow S.T., Cheung K.M.C., Chan D. and Chan B.P., Collagen-mesenchymal stem cell microspheres for the repair of articular cartilage defects in a rabbit model., Cold Srping Harbor Asia Conference - Bone and cartilage: From development to human diseases. Jun 11-15, 2012, Suzhou, China.. 2012, 86.

Wong M.Y., Improving Engraftment Potential of hMSCs after Encapsulation in Collagen Microsphere - an in Vitro and in Vivo Study, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-83.

Wong M.Y., Wong H.L., Chan S., Chan G.C.F. and Chan B.P., Regulation of migration characteristics of human mesenchymal stem cells (hMSCs) by encapsulation in collagen matrix. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 182.

Researcher : Wong MY

List of Research Outputs

Researcher : Wong YK

List of Research Outputs

Wong Y.K., Characterization of hMSCs Transmigrated Through Collagen Barrier, MPhil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-122.

Wong Y.K., Han S.J., Chan C.H., Shum D.K.Y., Chan G.C.F. and Chan B.P., Characterization of human mesenchymal stem cells selected by collagen barrier., Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore.. 2011, 182.

Researcher : Wu CBB

List of Research Outputs

Wen C., Wu C.B.B., Tang B., Wang T., Yan C.H., Lu W.W., Hu Y., Pan H. and Chiu P.K.Y., Collagen Fibril Stiffening in Osteoarthritic Cartilage of Human Beings Revealed by Atomic Force Microscopy, Osteoarthritis Cartilage. 2012.

Wu C.B.B., Micro/Nano-Mechanics of Cartilage with Osteoarthritis, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-136.

Researcher : Wu D

List of Research Outputs

Sze K.Y. and Wu D., New slave-node constraints and element for adaptive analysis of C⁰ plates, Structural Engineering & Mechanics. 2011, 39: 339-360.

Researcher : Wu KS

List of Research Outputs

Ngan A.H.W., Tang B., Chan Y.L., Wu K.S. and Zhou Z., "Nanomechanical Characterization of Biological Tissues", Invited Talk,, 4th International Indentation Workshop (IIW4), July 3-8, 2011, Seoul National University, South Korea.. 2011.

Researcher : Wu X

List of Research Outputs

Leung Y.C., Wu X. and Leung M.H.K., 2011 Research output Prize in Mechanical Engineering for the paper "A review on biodiesel production using catalyzed transesterification", HKU Faculty of Engineering. 2011.

Wu X. and Leung Y.C., Biodiesel production from camelina oil: Process optimization using orthogonal experiment, Applied Energy. UK, Elsevier, 2011, 88: 3615-3624.

Researcher : Wu Z

List of Research Outputs

Wu Z., Lo S.H., Sze K.Y. and Chen W.J., A higher order finite element including finite element including transverse normal strain for linear elastic composite plates with general lamination configurations, Finite Elements in Analysis and Design. 2012, 48: 1346-1357.

Researcher : Xu J

List of Research Outputs

Liu T., Houle J.D., Xu J., Chan B.P. and Chew S.Y., Nanofibrous collagen nerve conduits for spinal cord repair., Journal of Biomedical Materials Research Part A.. 2012, 18(9-10): 1057-1066.

Liu T., Houle J.D., Xu J., Chan B.P. and Chew S.Y., Nanofibrous collagen nerve conduits for spinal cord repair, Tissue Engineering Part A . 2012, 18(9-10): 1057-1066.

Liu T., Xu J., Chan B.P. and Chew S.Y., Sustained release of neurotrophin-3 and chondroitinase ABC from electrospun collagen nanofiber scaffold for spinal cord injury repair, Journal of Biomedical Materials Research Part A.. 2011.

Ma J., Xu J., Cheng J.P., Cheng S.H. and Chan B.P., Free form submicron-biofabrication of protein matrix via multiphoton photochemical crosslinking. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 125.

Xu J., Ma J., Cheng J.P., Cheng S.H. and Chan B.P., Multiphoton fabrication of micro-engineered structures with controllable porosity and mechanical properties. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 122.

Xu J., Two-photon Photochemical Crosslinking-based Fabrication of Protein Microstructures, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-119.

Researcher : Xu Q

List of Research Outputs

Xu Q., Modeling the Deformation of Primary Cilium, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-125.

Researcher : Xuan J

List of Research Outputs

Wang H., Leung Y.C. and Xuan J., Modeling of a micro auto-electrolytic cell for hydrogen production, International Journal of Hydrogen Energy. 2012, 37: 10002-10009.

Wang H., Leung Y.C. and Xuan J., Modeling of a microfludic electrochemical cell for CO₂ utilization, Proceedings of the Advanced Electrochemical Energy Symposum AEES. 2011, Abstract: 1pp.

Wang H., Leung Y.C. and Xuan J., Modeling of an air cathode for microfluidic fuel cells: Transport and polarization behaviors, International Journal of Hydrogen Energy. 2011, 36: 14704-14718.

Xuan J., Leung Y.C., Leung M.K.H., Ni M. and Wang H., A computational study of bifunctional oxygen electrode in air-breathing reversible microfluidic fuel cells, International Journal of Hydrogen Energy. UK, Elsevier, 2011, 36: 9231-9241.

Xuan J., Leung Y.C. and Wang H., Air: breathing membraneless laminar flow-based fuel cells: Can they breathe enough air?, Proceedings of the Advanced Electrochemical Energy Symposium AEES. 2011, Abstract: 1pp.

Xuan J., Leung Y.C., Leung M.K.H., Wang H. and Ni M., Chaotic flow-based fuel cell built on counter-flow microfluidic network: predicting the over-limiting current behaviour, Journal of Power Sources. UK, Elsevier, 2011, 196: 9391-9397.

Xuan J., Leung Y.C., Leung M.K.H., Ni M. and Wang H., Chemical & transport behaviors in a microfludic reformer with catalytic-support membrane for efficient hydrogen production & purification, International Journal of Hydrogen Energy. USA, Elsevier, 2012, 37: 2614-2622.

Xuan J., Leung M.K.H., Leung Y.C. and Ni M., Density-induced asymmetric pair of Dean vortices and its effects on mass transfer in a curved microchannel with two layer laminar stream, Chemical Engineering Journal. UK, Elsevier, 2011, 171: 216-223.

Xuan J., Leung Y.C., Leung M.K.H., Ni M. and Wang H., Hydrodynamic focusing in microfluidic membraneless fuel cells: breaking the trade-off between fuel utilization and current density, International Journal of Hydrogen Energy. UK, Elsever, 2011, 36: 11075-11084.

Xuan J., Numerical Study of Microfluidic Electrochemical Energy Coversion System, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-183.

Researcher : Xuan J

List of Research Outputs

Wang H., Leung Y.C. and Xuan J., Modeling of a micro auto-electrolytic cell for hydrogen production, International Journal of Hydrogen Energy. 2012, 37: 10002-10009.

Wang H., Leung Y.C. and Xuan J., Modeling of a microfludic electrochemical cell for CO₂ utilization, Proceedings of the Advanced Electrochemical Energy Symposum AEES. 2011, Abstract: 1pp.

Wang H., Leung Y.C. and Xuan J., Modeling of an air cathode for microfluidic fuel cells: Transport and polarization behaviors, International Journal of Hydrogen Energy. 2011, 36: 14704-14718.

Xuan J., Numerical Study of Microfluidic Electrochemical Energy Coversion System, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-183.

Researcher : Yang Y

List of Research Outputs

Leung Y.C. and Yang Y., Wind energy development and its environmental impact: a review, Renewable & Sustainable Energy Reviews. UK, Elsevier, 2012, 16: 1031-1039.

Yang Y. and Leung Y.C., Numerical simulation on the environmental impacts of a wind trubine, 7th Annual International Symposium on Environmental. Anthen, Greece, 2012, Abstract: 1pp.

Researcher : Ye R

List of Research Outputs

Ye R., Chen Y.H. and Yau W.P., A simple and novel hybrid robotic system for robot-assisted femur fracture reduction, Advanced Robotics. 2012, 26(1-2): 83-104.

Ye R., Development of a Hybrid Robotic System for Femur Fracture Reduction, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-169.

Researcher : Yeung CW

Project Title:	Effect of dynamic compression on differentiation of MSC to disc-like cells in 3D model and the role of integrin-based mechanosensing mechanism.
Investigator(s):	Yeung CW, Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	03/2011
Completion Date:	07/2012

List of Research Outputs

Yeung C.W., Au Y.K., Gao Y., Chan D., Cheah K.S.E. and Chan B.P., Developing three dimensional culture system for Notochordal cells. , World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P116.

Yeung C.W. and Chan B.P., Effect of cyclic compression loading on human mesenchymal stem cells-collagen microspheres in rabbit intervertebral disc organ culture (ID: 3857), 9th World Biomaterials Congress, Jun 1-5, 2012, Cheng Du, China. 2012, P-SAT-B-206.

Yuan M., Yeung C.W. and Chan B.P., Decellularization of Nucleus Pulposus Cell-Encapsulated Collagen Microspheres and Susceptibility of the Matrix to Recellularization with Mesenchymal Stem Cells. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 120.

Yuan M., Yeung C.W. and Chan B.P., Reconstitution of nucleus pulposus cell matrix niche in 3D configuration for mesenchymal stem cell differentiation., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P127.

Researcher : Yu C

List of Research Outputs

Yu C. and Leung Y.C., Life cycle analysis (LCA) for biodiesel, 7th Annual International Symposium on Environment. Anthen, Greece, 2012, Abstract: 1pp.

Yu C., Leung Y.C. and Leung M.K.H., Life cycle analysis of biodiesel and other biofuels: a review, Biodiesel: Blends, Propeties and Applications. New York, USA, Nova Science Publishers, Inc., 2011, 283-298.

Zhang Y., Yu C., Yung K.F., Leung Y.C., Sun F. and Lim B.L., Over-expression of AtPAP2 in Camelina sativa leads to faster plant growth and higher seed yield., Biotechnology for Biofuels . 2012, 5: 19-28.

Researcher : Yuan M

List of Research Outputs

Yuan M., Yeung C.W. and Chan B.P., Decellularization of Nucleus Pulposus Cell-Encapsulated Collagen Microspheres and Susceptibility of the Matrix to Recellularization with Mesenchymal Stem Cells. , Tissue Engineering and Regenerative Medicine International Society Asia-Pacific Chapter Meeting (TERMIS-AP) 3-5 Aug 2011. Waterfront Conference Centre, Singapore. . 2011, 120.

Yuan M., Yeung C.W. and Chan B.P., Reconstitution of nucleus pulposus cell matrix niche in 3D configuration for mesenchymal stem cell differentiation., World Forum for Spine Research - The Intervertebral disc - from degeneration to pain. 18-21 Jun, 2012. Helsinki, Finland.. 2012, P127.

Yuan M., Leong K. and Chan B.P., Three dimensional culture of rabbit nucleus pulposus cells in collagen microspheres, Spine J. 2011.

Researcher : Zhang L

List of Research Outputs

Zhang L., Dispersion of Coughed Droplets in Crowded Indoor Environment, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-118.

Zhang L. and Li Y., Dispersion of coughed droplets in a fully-occupied high-speed rail cabin , Building and Environment. 2012, 47: 58-66.

Researcher : Zhang Q

List of Research Outputs

Sze K.Y., Zhang Q. and Liu G., Hybrid quadrilateral finite element models for axial symmetric Helmholtz problem, Finite Elements in Analysis and Design. 2012, 52: 1-10.

Sze K.Y., Zhang Q. and Liu G., Multi-field three-node triangular finite element models for Helmholtz Problem, Journal of Computational Acoustics. 2011, 19: 317-344.

Researcher : Zhang X

List of Research Outputs

Tong H.W., Zhang X. and Wang M., A new nanofiber fabrication technique based on coaxial electrospinning, Materials Letters. 2011, 66: 257-260.

Tong H.W., Zhang X. and Wang M., Electrospinning of nanofibrous tissue engineering scaffolds: A comparative study, Proceedings of the 9th Pacific Rim Conference on Ceramics and Glass Technology (PacRim9). Cairns, Australia, 2011, 1pp.

Zhang X., Wang M., Yuan X.Y. and Kang J., A comparative study on conventional electrospinning and emulsion electrospinning of PLLA nanofibers, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011, 1pp.

Zhang X., Wang M., Yuan X.Y. and Kang J., A comparative study on conventional electrospinning and emulsion electrospinning of PLLA nanofibers, Advanced Materials Research. Switzerland, Trans Tech Publications, 2012, 410: 390-393.

Zhang X. and Wang M., Dual delivery of growth factors form electrospun bicomponent scaffolds for neural tissue engineering, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Zhang X. and Wang M., Effects of emulsion electrospinning parameters on the morphology and structure of core-shell structured PLLA fibers, 20th International Symposium on Processing and Fabrication of Advanced Materials. Hong Kong, 2011, 1pp.

Zhang X. and Wang M., Effects of emulsion electrospinning parameters on the morphology and structure of core-shell structured PLLA fibers, Advanced Materials Research. Switzerland, Trans Tech Publications, 2012, 410: 386-389.

Zhang X. and Wang M., Emulsion electrospinning of PLLA nanofibrous scaffolds for delivery biomolecules, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Zhang X., Wang C., Kang J. and Wang M., Morphological and structural control of electrospun PLLA nanofibers: Influence of electrospinning techniques and parameters, Proceedings of the 9th World Biomaterials Congress. Chengdu, China, 2012, 1pp.

Researcher : Zhang Y

List of Research Outputs

Zhang Y., Dynamic Mass Modification by Electric Circuits, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2012, 1-106.

Researcher : Zhao X

List of Research Outputs

Zhao X., The Influence of Defects on the Domain Structure and Properties of Ferroelectrics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-140.

Zhao X. and Soh A.K., The influence of mechanical and electrical interfacial conditions on threshold field of ferroelectric nanothin films, Functional Materials Letters. 2012, 5(1): UNSP 1250013.

Researcher : Zheng G

Project Title:	Theoretical investigation and atomistic simulation of deformation in iron-based bulk metallic glasses
Investigator(s):	Zheng G
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	08/2006

Project Title:	Atomistic Modeling of Mechanical Properties of Metal-Carbon Nanotube Composites
Investigator(s):	Zheng G
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	08/2007

Researcher : Zheng T

List of Research Outputs

Zheng T., A Bio-feedback Rehabilitation System for Neuromuscular Recovery on Elbow Joint Movement, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2011, 1-134.

Researcher : Zhou Q

List of Research Outputs

Zhou Q. and Ng C.O., Cross flow through a corrugated channel with patterned slip, In: Jane W.Z. Lu and Jeff J.F. Wang, Proceedings of the 16th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 1st Mainland-Hong Kong Youth Forum on Mechanics, and the 8th Shanghai-Hong Kong Forum on Mechanics and Its Application, Hong Kong, March 17. HKSTAM, 2012, 57.

Researcher : Zhou W

List of Research Outputs

Duan B., Wang M., Zhou W. and Cheung W.L., Nonisothermal melt-crystallization behavior of Ca-P/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanocomposite microspheres, Polymer Engineering and Science. USA, Wiley, 2011, 51: 1580-1591.

Researcher : Zhou Y

List of Research Outputs

Zhou Y. and Sze K.Y., A geometric nonlinear rotation-free triangle and its application to drape simulation, International Journal for Numerical Methods in Engineering. 2012, 89: 509-536.

Researcher : Zhou Z

List of Research Outputs

Ngan A.H.W., Tang B., Chan Y.L., Wu K.S. and Zhou Z., "Nanomechanical Characterization of Biological Tissues", Invited Talk,, 4th International Indentation Workshop (IIW4), July 3-8, 2011, Seoul National University, South Korea.. 2011.

Zhou Z., Tang B., Ngan A.H.W., Dong Z.N. and Wu Y.S., Hepatitis B surface antigen - antibody interactions studied by optical tweezers, IET Nanobiotechnology. 2012, 6(1): 9-15.

Zhou Z., Ngan A.H.W., Tang B. and Wang A.X., Reliable measurement of elastic modulus of cells by nanoindentation in an atomic force microscope, Journal of the Mechanical Behavior of Biomedical Materials. Elsevier Ltd., 2012, 8: 134-142.

Zhou Z., Tang B. and Ngan A.H.W., The biomechanics of drug-treated leukemia cells investigated using optical tweezers, Nano Life. World Scientific Publishing Co., 2012, 2(1): 1250010-1 to 1250010-10.

-- End of Listing --