DEPT OF MECHANICAL ENGG
| Researcher : Au-yeung KL |
| List of Research Outputs |
| Au-yeung K.L., Sze K.Y., Sham M.H. and Chan B.P., Development of a micromanipulator-based loading device for mechanoregulation study of human mesenchymal stem cells in 3D collagen constructs, Tissue Engineering, Part C. 2009, 15: 1-15. |
| Au-yeung K.L., Effect of Cyclic Compressive Loading on Human Mesenchymal Stem Cells (hMSCs) Seeded in Type I Collagen Matrix, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-93. |
| Chan B.P., Li C.H., Au-yeung K.L., Sze K.Y. and Ngan A.H.W., A microplate compression method for elastic modulus measurement of soft and viscoelastic collagen microspheres, Annals of Biomedical Engineering. 2008, 36(7): 1254-1267. |
| Researcher : Bai C |
| List of Research Outputs |
| Bai C. and Wang L., Constructal design of particle volume fraction in nanofluids, Journal of Heat Transfer. 2009, 131: 112402/1-112402/7. |
| Bai C., Wang L. and Cheng L., Remarks on microfluidic fabrication of nano-/subnano-liter droplets, Current Nanoscience. 2009, 5: 353-357. |
| Researcher : Chan BP |
| List of Research Outputs |
| Au-yeung K.L., Sze K.Y., Sham M.H. and Chan B.P., Development of a micromanipulator-based loading device for mechanoregulation study of human mesenchymal stem cells in 3D collagen constructs, Tissue Engineering, Part C. 2009, 15: 1-15. |
| Chan B.P., Li C.H., Au-yeung K.L., Sze K.Y. and Ngan A.H.W., A microplate compression method for elastic modulus measurement of soft and viscoelastic collagen microspheres, Annals of Biomedical Engineering. 2008, 36(7): 1254-1267. |
| Chan B.P., Chan G.C.F., Wong H.L., Cheung P.T., Cheah K.S.E. and Chan D., Cell-matrix Microspheres, Methods For Preparatin And Applications 07872058.8 - 1223 Pct/ib2007004413, European Patent Office. 2008. |
| Chan B.P., Chan C.M. and So K.F., Collagen-based microspheres and methods of preparation and use thereof, US Regular Patent. 2008. |
| Chan B.P., Inter-vertebral disc regeneration via tissue engineering, 6th HK International Orthopaedic Forum – Musculoskeletal degeneration. 2009. |
| Chan B.P., Hui T.Y., Wong H.K., Yip H.K. and Chan G.C.F., Mesenchymal stem cell-encapsulated collagen microspheres for bone tissue engineering, Tissue Engineering, Part C. 2009, 15: 1-11. |
| Chan B.P. and So K.F., Photochemically crosslinked collagen scaffolds and methods for their preparation, United States Patent. 2008, 1-20. |
| Chan B.P. and Leong K., Scaffolding in tissue engineering – General approaches and tissue-specific considerations (2008), Eur. J Spine. 2008, 17(4): 467-479. |
| Cheng H.W., Tsui K., Cheung K.M.C., Chan D. and Chan B.P., Decellularization of chondrocyte-encapsulated collagen microspheres - A 3D model to study the effects of acellular matrix on stem cell fate, Tissue Engineering, Part C. 2009, 15: 1-10. |
| Cheng H.W., Tsui Y.K., Cheung K.M.C., Chan D. and Chan B.P., Decellularization of chondrocyte-encapsulated collagen microspheres – A 3D model to study effects of acellular matrix on stem cell fate, Biomaterials Asia 2009. Hong Kong, PA16. |
| Cheng H.W., Luk K.D.K., Cheung K.M.C. and Chan B.P., Optimization of composite medium for simultaneous co-culture of 3D cartilage-like and bone-like constructs, Biomaterials Asia 2009. Hong Kong, PB15. |
| Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Creation of a tissue interface between bone-like construct and soft tissue-like construct, Biomaterials Asia 2009. Hong Kong, PA17. |
| Lee M., Lo A.C.Y., Cheung P.T., Wong D.S.H. and Chan B.P., Drug carrier systems based on collagen-alginate composite structures for improving the performance of GDNF-secreting HEK293 cells, Biomaterials Asia 2009. Hong Kong, PA15. |
| Lee M., Lo A.C.Y., Cheung P.T., Wong D.S.H. and Chan B.P., GDNF-secreting HEK293 cells in collagen-alginate composite gel and collagen microspheres embedded in alginate gel - New designs for drug delivery applications, Biomaterials. 2009, 30: 1214-1221. |
| Li C.H., Ngan A.H.W., Sze K.Y. and Chan B.P., Association study between elastic modulus and extracellular matrix components of collagen-mesenchymal stem cell microspheres during chondrogenic differentiation, Biomaterials Asia 2009. Hogn Kong, PA18. |
| Li Y.Y., Cheng H.W., Chan P.M., Wong M.Y., Chan D. and Chan B.P., Collagen-mesenchymal stem cell microspheres for cartilage tissue engineering, Biomaterials Asia 2009. Hong Kong, OD02. |
| Liu T., Choy T.H.A., Shi L., Chan B.P. and Chew S.Y., Acid-based electrospinning of type I collagen nanofibers for neural tissue engineering, Biomaterials Asia 2009. Hong Kong, PB34. |
| Wong H.L., Chan G.C.F., Yang Z. and Chan B.P., Functionally selecting hMSCs subpopulations with better migratory activities using a collagen barrier, Biomaterials Asia 2009. Hong Kong, PA14. |
| Wong M.Y., Hui T.Y., Yip H.K., Chan G.C.F. and Chan B.P., Self-assembled osteoinductive bone-like microparticles, Biomaterials Asia 2009. Hong Kong, PB16. |
| Yeung C.W., Cheah K.S.E., Chan D. and Chan B.P., Three dimensional culture and chondrogenic differentiation of mouse embryonic stem cells, Biomaterials Asia 2009. Hong Kong, OB01. |
| Yeung C.W., Chan D., Cheah K.S.E. and Chan B.P., Three dimensional culture and embryoid body-free chondrogenic differentiation of mouse embryonic stem cells in collagen microspheres, Tissue Engineering, Part A. 2009, 15: 1-15. |
| Researcher : Chan CM |
| List of Research Outputs |
| Chan B.P., Chan C.M. and So K.F., Collagen-based microspheres and methods of preparation and use thereof, US Regular Patent. 2008. |
| Researcher : Chan YL |
| List of Research Outputs |
| Chan Y.L., Ngan A.H.W. and King N.M., Use of focused ion beam milling for investigating the mechanical properties of biological tissues: A study of human primary molars, Journal of the Mechanical Behavior of Biomedical Materials. Elsevier Ltd., 2009, 2: 375-383. |
| Wu S.L., Liu X.M., Chan Y.L., Chung C.Y., Chu P.K., Chu C.L., Lam K.O., Yeung K.W.K., Lu W.W., Luk K.D.K. and Cheung K.M.C., In vitro bioactivity and osteoblast response on chemically modified biomedical porous NiTi synthesized by capsule-free hot isostatic pressing, Surf. Coat. Technol.. 2008, 202: 2458-2462. |
| Researcher : Chen KZ |
| List of Research Outputs |
| Chen K.Z. and Feng X.A., A gene-engineering-based design method for the innovation of manufactured products, Journal of Engineering Design. London, UK, Taylor & Francis, 2009, 20(2): 175-193. |
| Wang F., Chen K.Z. and Feng X.A., Behavior modeling of laser micromaching in hybrid layered manufacturing for components made of a material with a periodic microstructure, International Journal of Advanced Manufacturing Technology. 2008, 38: 85-92. |
| Wang F., Chen K.Z., Feng X.Y. and Feng X.A., Developing a manufacturing technology for the components made of a multiphase perfect material, International Journal of Advanced Manufacturing Technology. London, UK, Springer-Verlag, 2009, 40: 837-846. |
| Wang F., Chen K.Z. and Feng X.A., Virtual manufacturing to design a manufacturing technology, Computer-Aided Design and Applications. 2008, 5(1-4): 110-120. |
| Researcher : Chen X |
| List of Research Outputs |
| Chen X. and Soh A.K., Interaction of Gaussian beams propagating beyond the paraxial approximation with left-handed materials slabs, In: Soh, AK; Ng, CO, The 13th Annual Conference of HKSTAM, the 5th Jiangsu-Hong Kong Forum on Mechanics and its application and Symposium on the Development of Mechanics in Macau. Hong Kong, HKSTAM, 2009, 1: 28. |
| Researcher : Chen YH |
| List of Research Outputs |
| Chen Y.H., Outstanding organization of VECIMS 2008 in Istanbul ,2008, IEEE Instrumentation and Measurement Society. 2008. |
| Researcher : Cheng HW |
| List of Research Outputs |
| Cheng H.W., Tsui K., Cheung K.M.C., Chan D. and Chan B.P., Decellularization of chondrocyte-encapsulated collagen microspheres - A 3D model to study the effects of acellular matrix on stem cell fate, Tissue Engineering, Part C. 2009, 15: 1-10. |
| Cheng H.W., Tsui Y.K., Cheung K.M.C., Chan D. and Chan B.P., Decellularization of chondrocyte-encapsulated collagen microspheres – A 3D model to study effects of acellular matrix on stem cell fate, Biomaterials Asia 2009. Hong Kong, PA16. |
| Cheng H.W., Luk K.D.K., Cheung K.M.C. and Chan B.P., Optimization of composite medium for simultaneous co-culture of 3D cartilage-like and bone-like constructs, Biomaterials Asia 2009. Hong Kong, PB15. |
| Li Y.Y., Cheng H.W., Chan P.M., Wong M.Y., Chan D. and Chan B.P., Collagen-mesenchymal stem cell microspheres for cartilage tissue engineering, Biomaterials Asia 2009. Hong Kong, OD02. |
| Researcher : Cheng WC |
| List of Research Outputs |
| Cheng W.C., Liu C.H. and Leung Y.C., Computational formulation for the evaluation of street canyon ventilation and pollutant removal performance, Atmospheric Environment. Elsevier, 2008, 42: 9041-9051. |
| Cheng W.C., Liu C.H. and Leung Y.C., Estimates of Air & Pollutant Exchange for Street Canyon in Combined Wind- Buoyancy-Driven Flow Using the RANS Renormalized Group k-epsilon Model, 89th AMS Annual Conference, Phoenix, AZ, January, 11-15, 2009. |
| Cheng W.C., Liu C.H. and Leung Y.C., On the comparison of the ventilation performance of street canyons of different aspect ratios and Richardson number, Building Simulation. Springer, 2009, 2: 53-61. |
| Cheng W.C., Liu C.H. and Leung Y.C., On the correlation of air and pollutant exchange for street canyons in combined wind-buoyancy-driven flow, Atmospheric Environment. 2009. |
| Cheng W.C., Liu C.H. and Leung Y.C., Periodic flow and pollutant removal of street canyon in wind-buoyancy, The 7th International Conference of Urban Climate. Yokohama, Japan, 2009, CD-Rom: 4pp. |
| Researcher : Cheung OP |
| List of Research Outputs |
| Cheung O.P. and Liu C.H., Effects of Building Interference on Natural Ventilation for High-Rise Residential Buildings, Joint Symposium – Shaping our Future Environment – The Role of Building Services Professionals, 18 November 2008 at Kowloon Shangri-la Hotel. 2008. |
| Cheung O.P. and Liu C.H., Numerical Simulation of wind flow and natural ventilation of a high-rise building cluster, CUHK Interdisciplinary Architectural Postgraduate Workshop 2009, CUHK, April 25, 2009, CUHK, 2009. |
| Researcher : Cheung SC |
| List of Research Outputs |
| Huang L. and Cheung S.C., Computation of Sound Radiation in a Duct by Chebyshev Collocation, In: Tian et al, Proceedings of Inter-Noise 2008. Article No. 0512. |
| Researcher : Cheung WL |
| List of Research Outputs |
| Duan B., Wang M., Zhou W. and Cheung W.L., Design and Characteristics of Selective Laser Sintered Ca-P/PHBV Nanocomposite Scaffolds for Bone Tissue Engineering, Proceedings of the 4th International Symposium on Apatites and Correlative Biomaterials. 2008, 75-79. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Design and characteristics of selective laser sintered Ca-P/PHBV nanocomposite scaffolds for bone tissue engineering, Proceedings of the 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 75-79. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Synthesis of Ca-P Nanoparticles and Fabrication of Ca-P/PHBV Nanocomposite Microspheres for Bone Tissue Engineering Applications, Applied Surface Science. Elsevier B.V., 2008, 255: 529-533. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Synthesis of Ca-P nanoparticles and fabrication of Ca-P/PHBV microspheres for bone tissue engineering applications, Applied Surface Science. The Netherlands, Elsevier, 2008, 255: 529-533. |
| Fan K.M., Cheung W.L. and Gibson I., Fusion behavior of TureFormTM/SiO2 composite powders during selective laser sintering, Rapid Prototyping Journal. Emerald Group Publishing Ltd, 2008, 14(2): 87-94. |
| Lee S.H., Zhou W., Wang M., Cheung W.L. and Ip W.Y., Selective laser sintering of Poly(L-Lactide) porous scaffolds for bone tissue engineering, Journal of Biomimetics, Biomaterials and Tissue Engineering. Switzerland, Trans Tech Publications, 2008, 1: 81-89. |
| Zhou W., Duan B., Wang M. and Cheung W.L., Crystallization kinetics of poly(L-lactide)/carbonated hydroxyapatite nanocomposite microspheres, Journal of Applied Polymer Science. 2009, 113: 4100 - 4115. |
| Researcher : Chik TK |
| List of Research Outputs |
| Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Creation of a tissue interface between bone-like construct and soft tissue-like construct, Biomaterials Asia 2009. Hong Kong, PA17. |
| Researcher : Ching WH |
| List of Research Outputs |
| Ching W.H., Leung M.K.H., Leung Y.C., Li Y. and Yuen P.L., Effect of exhaust flow rate in airborne transmitted infection in two-bed hospital room, The 5th International Workshop on Energy and Environment of Residential Buildings and The 3rd International Conference on Built Environment and Public Health, May,29-31, 2009, Guilin, China, organized by Hunan University, The University of Hong Kong and Tsinghua University. 2009. |
| Ching W.H., Modeling of Contaminant Dispersion by Statistical Mechanics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2009, 1-224. |
| Qian H., Li Y., Seto W.H., Ching P., Ching W.H. and Sun H., Natural ventilation for reducing airborne infection in hospitals, Building and Environment. Elsevier Ltd., 2009, 1-7. |
| Researcher : Chiu HS |
| List of Research Outputs |
| Chiu H.S. and Chow K.W., Stability and propagation of pulses in nonlinear Schrodinger mdoels, SIAM Conference in Nonlinear Waves and Coherent Structures, Rome, Italy. 2008. |
| Ng C.O. and Chiu H.S., Solving the problem of water waves over a stratified muddy bed by Mathcad, Proceedings of the 12th Asian Congress of Fluid Mechanics, Daejeon, Korea, August 18–21. Korea, The Korean Society of Computational Fluids Engineering, 2008, CD-ROM: 4pp. |
| Ng C.O. and Chiu H.S., Use of Mathcad as a calculation tool for water waves over a stratified muddy bed, Coastal Engineering Journal. Singapore, World Scientific, 2009, 51(1): 69-79. |
| Researcher : Chiu HS |
| List of Research Outputs |
| Chiu H.S. and Chow K.W., Stability and propagation of pulses in nonlinear Schrodinger mdoels, SIAM Conference in Nonlinear Waves and Coherent Structures, Rome, Italy. 2008. |
| Ng C.O. and Chiu H.S., Solving the problem of water waves over a stratified muddy bed by Mathcad, Proceedings of the 12th Asian Congress of Fluid Mechanics, Daejeon, Korea, August 18–21. Korea, The Korean Society of Computational Fluids Engineering, 2008, CD-ROM: 4pp. |
| Ng C.O. and Chiu H.S., Use of Mathcad as a calculation tool for water waves over a stratified muddy bed, Coastal Engineering Journal. Singapore, World Scientific, 2009, 51(1): 69-79. |
| Researcher : Chow KW |
| List of Research Outputs |
| Cheng S.W.K., Lam S.K., Fung S.K., Ho P., Ting A.C.W. and Chow K.W., A computational fluid dynamic study of stent graft remodeling after endovascular repair of thoracic aortic dissections, Journal of Vascular Surgery. 2008, 48(2): 303-310. |
| Chiu H.S. and Chow K.W., Stability and propagation of pulses in nonlinear Schrodinger mdoels, SIAM Conference in Nonlinear Waves and Coherent Structures, Rome, Italy. 2008. |
| Conte R. and Chow K.W., Doubly periodic waves of a discrete nonlinear Schrödinger system with saturable nonlinearity, Journal of Nonlinear Mathematical Physics. 2008, 15(4): 398-409. |
| Grimshaw R.H.J., Zhang D. and Chow K.W., Transcritical flows over a hole, Studies in Applied Mathematics. Massachusetts Institute of Technology, 2009, 122: 235-248. |
| Lai D.W.C., Chow K.W., Rogers C. and Yan Z., Anti–dark solitons and periodic solutions of the resonant nonlinear Schrödinger equation, Advances in Nonlinear Waves and Symbolic Computation. Nova Science Publishers, Inc., 2008, Chapter 4: 101-110. |
| Lam C.K., Malomed B.A., Chow K.W. and Wai P.K.A., Spatial solitons supported by localized gain in nonlinear optical waveguides, European Physical Journal – Special Topics. EDP Sciences, Springer-Verlag, 2009, 173: 217-227. |
| Lam S.K., Fung S.K., Cheng S.W.K. and Chow K.W., A computational study on the biomechanical factors related to stent-graft models in the thoracic aorta, Medical and Biological Engineering and Computing. 2008, 46(11): 1129-1138. |
| Nakkeeran K. and Chow K.W., Chirped solitons and the nonlinear Schrodinger systems, Fifth World Congress of Nonlinear Analysts, Orlando, Florida, USA. 2008. |
| Pak O.S. and Chow K.W., Free surface waves on shear currents with non–uniform vorticity: third order solutions, Fluid Dynamics Research. IOP Publishing Ltd., 2009, 41: 035511 (13 pages). |
| Rogers C., Yip L.P. and Chow K.W., A resonant Davey-Stewartson capillarity model system: solitonic generation, International Journal of Nonlinear Sciences and Numerical Simulation. 2009, 10: 397-405. |
| Shubha N., Rudraiah N. and Chow K.W., Electrohydrodynamic stability of poorly conducting parallel fluid flow in the presence of transverse electric field, International Journal of Nonlinear Mechanics. 2008, 43: 643-649. |
| Researcher : Choy THA |
| List of Research Outputs |
| Liu T., Choy T.H.A., Shi L., Chan B.P. and Chew S.Y., Acid-based electrospinning of type I collagen nanofibers for neural tissue engineering, Biomaterials Asia 2009. Hong Kong, PB34. |
| Researcher : Deng Y |
| List of Research Outputs |
| Deng Y., Leung Y.C. and Leung M.K.H., A cost-effective micro wind turbine for buildings, The 5th International Workshop on Energy and Environment of Residential Buildings and The 3rd International Conference on Built Environment and Public Health, May,29-31, 2009, Guilin, China, organized by Hunan University, The University of Hong Kong and Tsinghua University. 2009. |
| Deng Y., Design Optimization of a Micro Wind Turbine using Computational Fluid Dynamics, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-247. |
| Leung Y.C., Leung M.K.H., Gambarota L. and Deng Y., Application of an innovative micro-wind turbine for harnessing wind with low and high wind speeds (Abstract), U21 International Conference on Energy Technologies and Policy. UK, University of Birmingham, 2008, 1pp. |
| Researcher : Deng Y |
| List of Research Outputs |
| Deng Y., Leung Y.C. and Leung M.K.H., A cost-effective micro wind turbine for buildings, The 5th International Workshop on Energy and Environment of Residential Buildings and The 3rd International Conference on Built Environment and Public Health, May,29-31, 2009, Guilin, China, organized by Hunan University, The University of Hong Kong and Tsinghua University. 2009. |
| Deng Y., Design Optimization of a Micro Wind Turbine using Computational Fluid Dynamics, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-247. |
| Leung Y.C., Leung M.K.H., Gambarota L. and Deng Y., Application of an innovative micro-wind turbine for harnessing wind with low and high wind speeds (Abstract), U21 International Conference on Energy Technologies and Policy. UK, University of Birmingham, 2008, 1pp. |
| Researcher : Du B |
| List of Research Outputs |
| Du B., Lam J., Shu Z. and Wang Z., A delay-partitioning projection approach to stability analysis of continuous systems with multiple delay components, IET Control Theory and Applications. 2009, 3(4): 383-390. |
| Du B., Lam J. and Shu Z., A delay-partitioning projection approach to stability analysis of neutral systems, IFAC World Congress 2008. Seoul, Korea, 12348-12353. |
| Du B., Lam J. and Shu Z., A matrix transformation approach to H-infinity control via static output feedback for input delay systems, 17th Mediterranean Conference on Control & Automation. Thessaloniki, Greece, 2009, 1373-1378. |
| Du B. and Lam J., Stability analysis of static recurrent neural networks using delay-partitioning and projection, Neural Networks. 2009, 22(4): 343-347. |
| Shu Z., Lam J., Gao H., Du B. and Wu L., Positive observers and dynamic output-feedback controllers for interval positive linear systems, IEEE Transactions on Circuits and Systems I. 2008, 55(10): 3209-3222. |
| Wu L., Lam J., Shu Z. and Du B., Stability and stabilizability of uncertain positive delay systems: Necessary and sufficient conditions, Asian Journal of Control. 2009, 11(2): 226-234. |
| Researcher : Duan B |
| List of Research Outputs |
| Duan B. and Wang M., Controlled release of biomolecules from Ca-P/PHBV nanocomposite microspheres, Proceedings of the 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 106-109. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Design and Characteristics of Selective Laser Sintered Ca-P/PHBV Nanocomposite Scaffolds for Bone Tissue Engineering, Proceedings of the 4th International Symposium on Apatites and Correlative Biomaterials. 2008, 75-79. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Design and characteristics of selective laser sintered Ca-P/PHBV nanocomposite scaffolds for bone tissue engineering, Proceedings of the 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 75-79. |
| Duan B., Lin P.Y. and Wang M., Fabrication and characterisation of biomolecule-loaded Ca-P/PHBV nanocomposite scaffolds via selective laser sintering, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 28. |
| Duan B. and Wang M., Immobilization of heparin on gelatin modified three-dimensional osteoconductive Ca-P/PHBV nanocomposite scaffolds, Proceedings of the 8th Pacific Rim Conference on Ceramics and Glass Technology. Vancouver, Canada, 2009, 1pp. |
| Duan B. and Wang M., Incorporation and release of biomolecules from Ca-P/PHBV nanocomposite tissue engineering scaffolds, Proceedings of the 17th International Conference on Processing and Fabrication of Advanced Materials. Delhi, India, 2008, 881-891. |
| Duan B. and Wang M., Surface modification of three-dimensional Ca-P/PHBV nanocomposite scaffolds with gelatin, Proceedings of the 7th International Conference on Materials Processing for Properties and Performance. Singapore, 2008, 3pp. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Synthesis of Ca-P Nanoparticles and Fabrication of Ca-P/PHBV Nanocomposite Microspheres for Bone Tissue Engineering Applications, Applied Surface Science. Elsevier B.V., 2008, 255: 529-533. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Synthesis of Ca-P nanoparticles and fabrication of Ca-P/PHBV microspheres for bone tissue engineering applications, Applied Surface Science. The Netherlands, Elsevier, 2008, 255: 529-533. |
| Zhou W., Duan B., Wang M. and Cheung W.L., Crystallization kinetics of poly(L-lactide)/carbonated hydroxyapatite nanocomposite microspheres, Journal of Applied Polymer Science. 2009, 113: 4100 - 4115. |
| Researcher : Duggan BJ |
| List of Research Outputs |
| Chang C.S.T., Duggan B.J. and Inagaki H., Relationships between cold rolling microstructures and recrystallisation textures in Al-5% Mg, 11th International Conference on Aluminium Alloys (This Physical and Mechanical Properties). Aachen, Germany, 2008. |
| Duggan B.J., An overview of work done in Hong Kong University on microstructure and texture development in drawable interstitial free (IF) steels, A Lecture Invited by Vice President Zhu Shigen of Donghua University, Shanghai, China. 2009. |
| Duggan B.J., Tse Y.Y., Lam G. and Quadir M.Z., Deformation and recrystallisation of IF steel, 2nd International Conference on Thermo-Mechanical Simulation and Processing of Steels (SimPro'08). Ranchi, India, Allied Publishers Pvt. Ltd., 2008, 313-322. |
| Duggan B.J., Quadir M.Z., Tse Y.Y. and Lam K.T., The body in white: Automobiles, steel and aluminium, A Lecture Invited by President Li of the South China University of Technology, Wu Shan, Guangzhou, China. 2009. |
| Researcher : Fan J |
| List of Research Outputs |
| Fan J. and Wang L., Macroscale heat transfer in nanofluids, Proceedings of 17 th International Conference on Composites or Nano Engineering. Honolulu, USA, 2009, 233-235. |
| Fan J. and Wang L., Microstructural effects on macroscale thermal properties in nanofluids, 2009 ASME Summer Heat Transfer Conference. ASME, 2009, HT2009-88649. |
| Fan J. and Wang L., Nanofluids heat conduction: numerical simulation, Proceedings of 5th International Conference on Diffusion in Solids and Liquids. DSL, 2009, 2009-228.1. |
| Wang L., Fan J. and Wei X., Is heat conduction in two-phase systems Fourier type?, 2009 ASME Summer Heat Transfer Conference. ASME, 2009, HT2009-88173. |
| Researcher : Feng L |
| List of Research Outputs |
| Huang L., Ma X. and Feng L., Fan Noise Radiation in a Duct with Bulk Reactive Casing Treatment, In: Tian et al, Proceedings of Inter-Noise 2008. Article 0497. |
| Researcher : Fu Y |
| List of Research Outputs |
| Fu Y., A Haptic-Based Approach for the Conceptual Design of Multi-Material Products, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-97. |
| Researcher : Hang J |
| List of Research Outputs |
| Hang J., Sandberg M. and Li Y., Age of air and air exchange efficiency in idealized city models, Building and Environment. Elsevier Ltd., 2009, 44: 1714-1723. |
| Hang J., Sandberg M. and Li Y., Effect of urban morphology on wind condition in idealized city models, Atmospheric Environment. Elsevier Ltd., 2009, 43: 869-878. |
| Researcher : He X |
| List of Research Outputs |
| He X., Haptic Modeling for Virtual Manufacturing, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-244. |
| Researcher : Hong L |
| List of Research Outputs |
| Hong L., Soh A.K., Liu S. and Lu L., Influence of size-dependent electrostatic energy on the ferroelectric nanodot domain structure by phase field method , Journal of Physics D - Applied Physics. England, IOP PUBLISHING LTD, 2009, 42: Art. no. 122005. |
| Hong L., Soh A.K., Song Y. and Lim L.C., Interface and surface effects on ferroelectric nano-thin films, Acta Materialia. UK, Pergamon-Elsevier, 2008, 56(13): 2966-2974. |
| Hong L. and Soh A.K., Modeling of the influence of oxygen vacancy diffusion on the fatigue property of ferroelectric single crystals, In: Kim, KW; Kitamura, K; Lu, L; Xue, DF, International Conference on Advances in Functional Materials. China, Dalian University of Technology, 2009, 1: 15. |
| Hong L. and Soh A.K., Modeling of the influence of oxygen vacancy diffusion on the fatigue property of ferroelectric single crystals, In: K.W. Kim, K. Kitamura, L. Lu, D.F. Xue, International Conference on Advances in Functional Materials. China, Dalian University of Technology, 2009, 1: 15. |
| Researcher : Huang L |
| List of Research Outputs |
| Huang L., Broadband duct noise attenuation by a middle-ear mechanism, In: A Pierce, Journal of the Acoustical Society of America. Acoustical Society of America, 2008, 124: 2516. |
| Huang L. and Cheung S.C., Computation of Sound Radiation in a Duct by Chebyshev Collocation, In: Tian et al, Proceedings of Inter-Noise 2008. Article No. 0512. |
| Huang L., Ma X. and Feng L., Fan Noise Radiation in a Duct with Bulk Reactive Casing Treatment, In: Tian et al, Proceedings of Inter-Noise 2008. Article 0497. |
| Huang L., Membrane covered duct lining for high frequency noise attenuation – prediction using a Chebyshev collocation method, Journal of the Acoustical Society of America. 2008, 124(5): 2918-2929. |
| Huang L., Subject Editor, In: Morfey, CL, Journal of Sound and Vibration. Elsevier, 2009. |
| Wang C., Cheng L. and Huang L., Realization of a broadband low-frequency plate silencer using sandwich plates, Journal of Sound and Vibration. 2008, 318: 792-808. |
| Researcher : Hui SCM |
| List of Research Outputs |
| Hui S.C.M., ASHRAE Chapter Service Award, American Society of Heating, Refrigerating and Air Conditioning Engineers. 2008. |
| Hui S.C.M., ASHRAE Regional Award of Merit, American Society of Heating, Refrigerating and Air Conditioning Engineers. 2008. |
| Hui S.C.M., Analysis of effective lighting systems for university classrooms, Proceedings of the Henan-Hong Kong Joint Symposium 2008, 30 Jun-1 July 2008, Zhengzhou, China. Zhengzhou, China, 2008, 53-64. |
| Hui S.C.M., Development of modular green roofs for high-density urban cities, World Green Roof Congress 2008, 17-18 September 2008, London. London, International Green Roof Association, 2008, 12 pages. |
| Hui S.C.M., Research and development of green roof systems in Hong Kong, In: Hong Kong Institute of Architects (HKIA), Invited presentation for the Green Roof Action Project: Green Roof Experience Sharing Seminar, 15 November 2008 (Sat), HKIA Headquarters. Hong Kong, Hong Kong Institute of Architects (HKIA), 2008, n/a. |
| Hui S.C.M., Sustainable building technologies for hot and humid climates, 探討炎熱和潮濕氣候的可持續建築科技, In: Wang Zhu, et al., Green Building Design and Technologies: Experience in Hangzhou and Hong Kong. 可持續建築設計與技術--杭州及香港實例, Guangzhou, China Architectural and Building Press, 2008, n/a: 237-243. |
| Hui S.C.M. and Cheung W.Y., Two-stage evaporative cooling systems in hot and humid climate, 兩個階段的蒸發冷卻系統在炎熱潮濕氣候的應用分析, Proceedings of the Tianjin-Hong Kong Joint Symposium 2009. 2009津港建築設備工程技術交流研討會, Tianjin, China, Organizing Committee of the Symposium, n/a: 64-76. |
| Researcher : Hui TY |
| List of Research Outputs |
| Chan B.P., Hui T.Y., Wong H.K., Yip H.K. and Chan G.C.F., Mesenchymal stem cell-encapsulated collagen microspheres for bone tissue engineering, Tissue Engineering, Part C. 2009, 15: 1-11. |
| Wong M.Y., Hui T.Y., Yip H.K., Chan G.C.F. and Chan B.P., Self-assembled osteoinductive bone-like microparticles, Biomaterials Asia 2009. Hong Kong, PB16. |
| Researcher : Ip RWL |
| List of Research Outputs |
| Hung Y.Y., Chen Y.S., Ng S.P., Liu L., Huang Y.H., Luk B.L., Ip R.W.L. and Wu C.M.L., Review and comparison of shearography and active thermography for nondestructive evaluation, Materials Science and Engineering R. Netherlands, Elsevier Science SA, 2009, 64: 73-112. |
| Tsui W.T.M. and Ip R.W.L., Radio frequency textile drying machine, London, UK, European Patent Bulletin, 2008. |
| Researcher : Kang J |
| List of Research Outputs |
| Kang J., Wang M. and Yuan X.Y., An investigation into dual-source and dual-power electrospinning of nanofibrous membranes for medical applications, Advanced Materials Research. Switzerland, Trans Tech Publications, 2008, 47-50: 1454-1457. |
| Kang J., Wang M. and Yuan X.Y., Fibrous hybrid membranes fabricated through electrospinning of Poly(L-lactic acid) and gelatin, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 16. |
| Kang J., Wang M. and Yuan X.Y., Formation of hybrid fibrous membranes through electrospinning, Proceedings of the 7th International Conference on Materials Processing for Properties and Performance. Singapore, 2008, 3pp. |
| Researcher : Kou X |
| List of Research Outputs |
| Kou X., Liu X.C. and Tan S.T., Quadtree Based Mouse Trajectory Analysis for efficacy evaluation of Voice-enabled CAD , 2009 IEEE International Conference on Virtual Environments, Human-Computer Interfaces and Measurement Systems, Hong Kong. 2009. |
| Kou X. and Tan S.T., Robust and efficient algorithms for rapid prototyping of heterogeneous objects, Journal of Rapid Prototyping. 2009, 15: 5-18. |
| Xue S., Kou X. and Tan S.T., Natural Voice-Enabled CAD: Modeling via Natural Discourse, Computer-Aided Design and Applications. 2009. |
| Researcher : Lam CK |
| List of Research Outputs |
| Lam C.K., Malomed B.A., Chow K.W. and Wai P.K.A., Spatial solitons supported by localized gain in nonlinear optical waveguides, European Physical Journal – Special Topics. EDP Sciences, Springer-Verlag, 2009, 173: 217-227. |
| Lam C.K., The Dynamics of Wave Propagation in an Inhomogeneous Medium: the Complex Ginzhurg-Landau Model, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-110. |
| Researcher : Lam HN |
| List of Research Outputs |
| Lam H.N., Computer Modelling and Simulation of Geothermal Heat Pump and Ground-coupled Liquid Desiccant Air Conditioning Systems, Nanjing Normal University. 2008. |
| Lam H.N., GIS-based Intelligent Management of Building Facilities and Security System, WCSET 2009 Hong Kong Conference. 2009. |
| Lam H.N., Moisture Control Based on Liquid Desiccant Dehumidification and Far Infrared Radiation Technologies, Conference on Far Infrared Rays Product Markets and Its Business Opportunities. 2009. |
| Lam H.N., The Role of PLC Technology in Intelligent Buildings and Smart Homes, 4th Powerline Communication (PLC) Asia 2008 Conference. 2008. |
| Lee C.K. and Lam H.N., Computer Simulation of Ground-coupled Liquid Desiccant Air Conditioner for Sub-tropical Regions, International Journal of Thermal Sciences. 2009. |
| Lee C.K. and Lam H.N., Determination of Groundwater Velocity in Thermal Response Test Analysis, 11th International Conference on Thermal Energy Storage, Effstock 2009 – Thermal Energy Storage for Efficiency and Sustainability. 2009. |
| Lee H.Y. and Lam H.N., Open Integrated GIS-Based Platform for Building Management with Web Services, The 4th Annual Green Intelligent Buildings Conference . 2009. |
| Researcher : Lam J |
| List of Research Outputs |
| Dong D. and Lam J., Rapid incoherent control of a simple quantum system via two-step optimization, Chinese Control Conference 2008. Kunming, China, 511-515. |
| Dong D., Lam J. and Tarn T...-.J..., Rapid incoherent control of quantum systems based on continuous measurements and reference model, IET Control Theory and Applications. 2009, 3(2): 161-169. |
| Du B., Lam J., Shu Z. and Wang Z., A delay-partitioning projection approach to stability analysis of continuous systems with multiple delay components, IET Control Theory and Applications. 2009, 3(4): 383-390. |
| Du B., Lam J. and Shu Z., A delay-partitioning projection approach to stability analysis of neutral systems, IFAC World Congress 2008. Seoul, Korea, 12348-12353. |
| Du B., Lam J. and Shu Z., A matrix transformation approach to H-infinity control via static output feedback for input delay systems, 17th Mediterranean Conference on Control & Automation. Thessaloniki, Greece, 2009, 1373-1378. |
| Du B. and Lam J., Stability analysis of static recurrent neural networks using delay-partitioning and projection, Neural Networks. 2009, 22(4): 343-347. |
| Du H., Zhang N. and Lam J., Parameter-dependent input-delayed control of uncertain vehicle suspensions, Journal of Sound and Vibration. 2008, 318(3-5): 537-556. |
| Feng J., Lam J. and Xu S., Finite-time functional observers for descriptor systems, International Journal of Control, Automation, and Systems. 2009, 7(3): 341-347. |
| Gao H., Wu J., Lam J. and Chu D., Exponential stabilization of linear systems with probabilistic sampling, IFAC World Congress 2008. Seoul, Korea, 6804-6807. |
| Gao H., Zhao Y., Lam J. and Chen K., H¥ fuzzy filtering of nonlinear systems with intermittent measurements, IEEE Transactions on Fuzzy Systems. 2009, 17(2): 291-300. |
| Gao H., Liu X. and Lam J., Stability analysis and stabilization for discrete-time fuzzy systems with time-varying delay, IEEE Transactions on Systems, Man, and Cybernetics (B). 2009, 39(2): 306-317. |
| Haidar A., Boukas E...-.K..., Xu S. and Lam J., Exponential stability and static output feedback stabilization of singular time-delay systems with saturating actuators, American Control Conference 2009. St. Louis, USA, 4945-4950. |
| Lam J., A Tutorial on Model Reduction, Harbin Institute of Technology. 2008. |
| Lam J., Associate Editor , International Journal of Applied Mathematics and Computer Science. 2009. |
| Lam J., Associate Editor, Asian Journal of Control. 2008. |
| Lam J., Associate Editor, Automatica. 2009. |
| Lam J., Associate Editor, Conference Editorial Board of IEEE Control Systems Society. 2009. |
| Lam J., Associate Editor, Dynamics of Continuous, Discrete, and Impulsive Systems – Series B. 2008. |
| Lam J., Associate Editor, IEEE Transactions on Signal Processing. 2008. |
| Lam J., Associate Editor, International Journal of Systems Science. 2008. |
| Lam J., Associate Editor, Journal of Sound and Vibration. 2008. |
| Lam J., Associate Editor, Journal of The Franklin Institute. 2009. |
| Lam J., Control of Discrete Positive Linear Systems, Harbin Institute of Technology. 2008. |
| Lam J., Editoral Member, Journal of Electrical and Computer Engineering. 2008. |
| Lam J., Guest Professorship, Harbin Institute of Technology. 2008. |
| Lam J., Member of Editorial Board, IET Control Theory and Applications. 2009. |
| Lam J., Member of Editorial Board, International Journal of Systems, Control and Communications. 2009. |
| Lam J., Member of Editorial Board, Research Letters in Signal Processing. 2009. |
| Lam J., Member of Editorial Board, The Open Automation and Control Journal. 2009. |
| Lam J., Member of Editorial Board, The Open Electrical and Electronic Journal. 2009. |
| Lam J., Outstanding Researcher Award, The University of Hong Kong. 2008. |
| Lam J., Subject Editor, Journal of Sound and Vibration. 2009. |
| Lam J., Transient and Steady-State Estimates of Interval Genetic Regulatory Networks, Hangzhou Dianzi University. 2008. |
| Lam J., Transient and Steady-State Estimates of Interval Genetic Regulatory Networks, Harbin Institute of Technology. 2008. |
| Lam J., Transient and Steady-State Estimates of Interval Genetic Regulatory Networks, Nanjing Normal University. 2009. |
| Lam J., Transient and Steady-State Estimates of Interval Genetic Regulatory Networks, Nanjing University of Science and Technology. 2009. |
| Lam J., Transient and Steady-State Estimates of Interval Genetic Regulatory Networks, Zhejiang University of Technology. 2008. |
| Mao X., Lam J. and Huang L., Stabilisation of hybrid stochastic differential equations by delay feedback control, Systems and Control Letters. 2008, 57(11): 927-935. |
| Meng X., Lam J. and Fei Z., A generalized parameter-dependent approach to robust H¥ filtering of stochastic Systems, Circuits, Systems and Signal Processing. 2009, 28(2): 191-204. |
| Meng X., Lam J. and Gao H., H-infinity filter design for quantum stochastic systems, Chinese Control Conference 2008. Kunming, China, 525-529. |
| Meng X., Lam J. and Gao H., Network-based H¥ control for stochastic systems, International Journal of Robust and Nonlinear Control. 2009, 19(3): 295-312. |
| Niu Y., Lam J., Wang X. and Ho D.W.C., Neural adaptive sliding mode control for a class of nonlinear neutral delay systems, Journal of Dynamic Systems, Measurement and Control. 2008, 130(6): 061011, 7 pages. |
| Paszke W., Galkowski K., Rogers E. and Lam J., H2 and mixed H2/H¥ stabilization and disturbance attenuation for differential linear differential processes, IEEE Transactions on Circuits and Systems I. 2008, 55(9): 2813-2826. |
| Shu Z. and Lam J., An augmented system approach to static output-feedback stabilization with H¥ performance for continuous-time plants, International Journal of Robust and Nonlinear Control. 2009, 19(7): 768-785. |
| Shu Z. and Lam J., Global exponential estimates of stochastic interval neural networks with discrete and distributed delays, Neurocomputing. 2008, 71(13-15): 2950-2963. |
| Shu Z., Lam J. and Xu S., Improved exponential estimates for neutral systems, Asian Journal of Control. 2009, 11(3): 261-270. |
| Shu Z., Lam J. and Xiong J., Mixed H2/H-infinity control of discrete-time markovian jump systems via static output feedback controllers, IFAC World Congress 2008. Seoul, Korea, 5909-5914. |
| Shu Z., Lam J. and Xiong J., Non-fragile exponential stability assignment of discrete-time linear systems with missing data in actuators, IEEE Transactions on Automatic Control. 2009, 54(3): 625-630. |
| Shu Z. and Lam J., On exact exponential stability assignment of retarded delay systems via static output-feedback controllers, Recent Advances in Automation & Information: Proceedings of the 10th WSEAS International Conference on Automation & Information (ICAI'09). Prague, Czech Republic, Book Series: Recent Advances in Electrical Engineering, 2009, 58-63. |
| Shu Z., Lam J., Gao H., Du B. and Wu L., Positive observers and dynamic output-feedback controllers for interval positive linear systems, IEEE Transactions on Circuits and Systems I. 2008, 55(10): 3209-3222. |
| Wang J., Lam J., Xu S. and Shu Z., Time-multiplied guaranteed cost control of linear delay systems, Journal of Dynamic Systems, Measurement and Control. 2008, 130(6): 061007, 11 pages. |
| Wang Q. and Lam J., Delay-dependent L2-L-infinity model reduction for polytopic systems with time-varying delay, IEEE International Conference on Automation and Logistics. Qingdao, China, 2008, 50-55. |
| Wang Z., Lam J., Wei G., Fraser K. and Liu X., Filtering for nonlinear genetic regulatory networks with stochastic disturbances, IEEE Transactions on Automatic Control. 2008, 53(10): 2448-2457. |
| Wu L., Lam J. and Wang C., Robust H¥ dynamic output feedback control for 2-D linear parameter-varying systems, IMA Journal of Mathematical Control and Information. 2009, 26(1): 23-44. |
| Wu L. and Lam J., Sliding mode control of switched hybrid systems with time-varying delay, International Journal of Adaptive Control and Signal Processing. 2008, 22(10): 909-931. |
| Wu L., Lam J., Shu Z. and Du B., Stability and stabilizability of uncertain positive delay systems: Necessary and sufficient conditions, Asian Journal of Control. 2009, 11(2): 226-234. |
| Xi Z. and Lam J., Stabilization of generalized hamiltonian systems with internally generated energy and applications to power systems, Nonlinear Analysis: B – Real World Applications. 2008, 9(3): 1202-1223. |
| Xiong J. and Lam J., Robust H2 control of markovian jump systems with uncertain switching probabilities, International Journal of Systems Science. 2009, 40(3): 255-265. |
| Xiong J. and Lam J., Stabilization of networked control systems with A Logic ZOH, IEEE Transactions on Automatic Control. 2009, 54(2): 358-363. |
| Xu S. and Lam J., A survey of linear matrix inequality techniques in stability analysis of delay systems, International Journal of Systems Science. 2008, 39(12): 1095-1113. |
| Yue D., Lam J. and Wang Z., Persistent disturbance rejection via state feedback for networked control systems, Chaos, Solitons, and Fractals. 2009, 40(1): 382-391. |
| Zhang B., Lam J. and Xu S., Deconvolution filtering for stochastic systems via homogeneous polynomial lyapunov functions, Signal Processing. 2009, 89(4): 605-614. |
| Zhang B., Lam J., Xu S. and Shu Z., Robust stabilization of uncertain T-S fuzzy time-delay systems with exponential estimates, Fuzzy Sets and Systems. 2009, 160(12): 1720-1737. |
| Zhang L., Boukas E...-.K... and Lam J., Analysis and synthesis of markov jump linear systems with time-varying delays and partially known transition probabilities, IEEE Transactions on Automatic Control. 2008, 53(10): 2458-2464. |
| Zhao Y., Lam J. and Gao H., Fault detection for fuzzy systems with intermittent measurements, IEEE Transactions on Fuzzy Systems. 2009, 17(2): 398-410. |
| Zhou B., Lam J. and Duan G.R., Convergence of gradient-based iterative solution of couple markovian jump lyapunov equations, Computers and Mathematics with Applications. 2008, 56(12): 3070-3078. |
| Researcher : Lam SK |
| List of Research Outputs |
| Cheng S.W.K., Lam S.K., Fung S.K., Ho P., Ting A.C.W. and Chow K.W., A computational fluid dynamic study of stent graft remodeling after endovascular repair of thoracic aortic dissections, Journal of Vascular Surgery. 2008, 48(2): 303-310. |
| Lam S.K., Computational Fluid Dynamic Analyses of the Endovascular Stent-graft at the Thoractic Aorta with Different Biomechanical Factors, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-173. |
| Researcher : Lam SK |
| List of Research Outputs |
| Cheng S.W.K., Lam S.K., Fung S.K., Ho P., Ting A.C.W. and Chow K.W., A computational fluid dynamic study of stent graft remodeling after endovascular repair of thoracic aortic dissections, Journal of Vascular Surgery. 2008, 48(2): 303-310. |
| Lam S.K., Computational Fluid Dynamic Analyses of the Endovascular Stent-graft at the Thoractic Aorta with Different Biomechanical Factors, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-173. |
| Researcher : Lee CK |
| List of Research Outputs |
| Lee C.K., Computer Modelling and Simulation of Geothermal Heat Pump and Ground-coupled Liquid Desiccant Air Conditioining Systems is Sub-tropical Regions, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-192. |
| Lee C.K. and Lam H.N., Computer Simulation of Ground-coupled Liquid Desiccant Air Conditioner for Sub-tropical Regions, International Journal of Thermal Sciences. 2009. |
| Lee C.K. and Lam H.N., Determination of Groundwater Velocity in Thermal Response Test Analysis, 11th International Conference on Thermal Energy Storage, Effstock 2009 – Thermal Energy Storage for Efficiency and Sustainability. 2009. |
| Researcher : Lee HY |
| List of Research Outputs |
| Lee H.Y. and Lam H.N., Open Integrated GIS-Based Platform for Building Management with Web Services, The 4th Annual Green Intelligent Buildings Conference . 2009. |
| Researcher : Lee SH |
| List of Research Outputs |
| Lee S.H., Zhou W., Wang M., Cheung W.L. and Ip W.Y., Selective laser sintering of Poly(L-Lactide) porous scaffolds for bone tissue engineering, Journal of Biomimetics, Biomaterials and Tissue Engineering. Switzerland, Trans Tech Publications, 2008, 1: 81-89. |
| Researcher : Leung MKH |
| List of Research Outputs |
| Ching W.H., Leung M.K.H., Leung Y.C., Li Y. and Yuen P.L., Effect of exhaust flow rate in airborne transmitted infection in two-bed hospital room, The 5th International Workshop on Energy and Environment of Residential Buildings and The 3rd International Conference on Built Environment and Public Health, May,29-31, 2009, Guilin, China, organized by Hunan University, The University of Hong Kong and Tsinghua University. 2009. |
| Deng Y., Leung Y.C. and Leung M.K.H., A cost-effective micro wind turbine for buildings, The 5th International Workshop on Energy and Environment of Residential Buildings and The 3rd International Conference on Built Environment and Public Health, May,29-31, 2009, Guilin, China, organized by Hunan University, The University of Hong Kong and Tsinghua University. 2009. |
| Leung M.K.H., Tham A.G. and Leung Y.C., Airfoil-blade micro wind turbines, World Renewable Energy Congress 2009 - Asia, The 3rd International Conference on Sustainable Energy and Environment, 18-23 May 2009, Bangkok, Thailand, organized by The Joint Graduate School of Energy and Environment (JGSEE), King Mongkut’s University of Technology Thonburi, Bangkok, Thailand.. 2009. |
| Leung M.K.H. and Chan K.Y., Theoretical and experimental studies of heat transfer with moving phase-change interface in freezing and thawing of porous potting soil, Journal of Zhejiang University Science - A, 10, 1-6. 2009. |
| Leung Y.C., Leung M.K.H. and Chan A.H.S., An overview of emissions trading and its prospects in Hong Kong, In: Environmental Science & Policy, 2009, 12: 92-101. |
| Leung Y.C., Leung M.K.H., Gambarota L. and Deng Y., Application of an innovative micro-wind turbine for harnessing wind with low and high wind speeds (Abstract), U21 International Conference on Energy Technologies and Policy. UK, University of Birmingham, 2008, 1pp. |
| Leung Y.C., Ni M. and Leung M.K.H., Conference Proceeding Editors, The 1st International Conference on Applied Energy. Hong Kong, University of Hong Kong, 2009, 1-1600. |
| Li S.L., Leung M.K.H., Leung Y.C. and Ni M., Review on Development and Recent Progress of Dye-Sensitized Solar Cell Technology, Solar Energy: Research, Technology and Applications. NOVA Publishers, 2008. |
| Ni M., Leung Y.C. and Leung M.K.H., A complete polarization model for carbon dioxide electrolysis for oxygen production, The First Regional Electrochemistry Meeting of South-East Asia REMSEA 2008, 5-7 August 2008, Singapore. 2008. |
| Ni M., Leung Y.C. and Leung M.K.H., An improved electrochemical model for the NH3 fed proton conducting solid oxide fuel cells at intermediate temperatures, Journal of Power Sources. Elsevier, 2008, 185: 233-240. |
| Ni M., Leung Y.C. and Leung M.K.H., An isothermal 1D model of ammonia fed solid oxide fuel cells based on proton conducting electrolyte, The First Regional Electrochemistry Meeting of South-East Asia REMSEA 2008, 5-7 August 2008, Singapore. 2008. |
| Ni M., Leung Y.C. and Leung M.K.H., Electrochemical Modeling of Methane Fed Solid Oxide Fuel Cells: Comparison Between Proton Conducting Electrolyte and Oxygen Ion Electrolyte, Journal of Power Sources. Elsevier, 2008, 183: 133-142. |
| Ni M., Leung Y.C. and Leung M.K.H., Electrochemical modeling and parametric study of methane fed solid oxide fuel cells, Energy Conversion and Management. Elsevier, 2009, 50: 268-278. |
| Ni M., Leung Y.C. and Leung M.K.H., Electrochemical modeling of ammonia fed solid oxide fuel cells based on proton conducting electrolyte, Journal of Power Sources. Elsevier, 2008, 183: 687-692. |
| Ni M., Leung M.K.H. and Leung Y.C., Electrochemical modeling of hydrogen production by proton-conducting solid oxide steam electrolyzer, International Journal of Hydrogen Energy. Elsevier, 2008, 33: 4040-4047. |
| Ni M., Leung M.K.H. and Leung Y.C., Energy and exergy analysis of hydrogen production by a proton exchange membrane (PEM) electrolyzer plant, Energy Conversion and Management. Elsevier, 2008, 49: 2748-2756. |
| Ni M., Leung Y.C. and Leung M.K.H., Importance of pressure gradient in solid oxide fuel cell electrodes for modeling study, Journal of Power Sources. Elsevier, 2008, 183: 668-673. |
| Ni M., Leung Y.C. and Leung M.K.H., Mathematical modeling of ammonia-fed solid oxide fuel cells with different electrolytes, International Journal of Hydrogen Energy. Elsevier, 2008, 33: 5765-5772. |
| Ni M., Leung M.K.H. and Leung Y.C., Modeling of Electrochemistry and Heat/Mass Transfer in a Tubular Solid Oxide Steam Electrolyzer for Hydrogen Production , Chemical Engineering & Technology. 2008, 31: 1319-1327. |
| Ni M., Leung Y.C. and Leung M.K.H., Thermodynamic analysis of ammonia fed solid oxide fuel cells: comparison between proton-conducting electrolyte and oxygen ion-conducting electrolyte, Journal of Power Sources. Elsevier, 2008, 183: 682-686. |
| Ni M., Leung Y.C. and Leung M.K.H., Three-dimensional modeling of planar solid oxide fuel cells based on proton conducting electrolyte, The First Regional Electrochemistry Meeting of South-East Asia REMSEA 2008, 5-7 August 2008, Singapore. 2008. |
| Wang H., Leung Y.C., Leung M.K.H. and Ni M., A review on hydrogen production using aluminum and aluminum alloys, Renewable and Sustainable Energy Reviews. 2009, 13: 845-853. |
| Wang H., Leung Y.C., Leung M.K.H. and Ni M., Modeling and analysis of an aluminium-water electrochemical generator for both electricity and hydrogen production, The First International Conference on Applied Energy, 5-7 January 2009, Hong Kong. 2009. |
| Wong I., Tsai H.L. and Leung M.K.H., Experimental and modeling studies of light transmitting monolithic photocatalytic reactor for water purification, The 5th International Workshop on Energy and Environment of Residential Buildings and The 3rd International Conference on Built Environment and Public Health, May,29-31, 2009, Guilin, China, organized by Hunan University, The University of Hong Kong and Tsinghua University.. 2009. |
| Xuan J., Leung M.K.H., Leung Y.C. and Ni M., Assessment of coating-by-parts method to determine the CO distribution in a water gas shift reactor by CFD modeling, The First International Conference on Applied Energy, 5-7 January 2009, Hong Kong. 2009. |
| Researcher : Leung YC |
| List of Research Outputs |
| Cheng W.C., Liu C.H. and Leung Y.C., Computational formulation for the evaluation of street canyon ventilation and pollutant removal performance, Atmospheric Environment. Elsevier, 2008, 42: 9041-9051. |
| Cheng W.C., Liu C.H. and Leung Y.C., Estimates of Air & Pollutant Exchange for Street Canyon in Combined Wind- Buoyancy-Driven Flow Using the RANS Renormalized Group k-epsilon Model, 89th AMS Annual Conference, Phoenix, AZ, January, 11-15, 2009. |
| Cheng W.C., Liu C.H. and Leung Y.C., On the comparison of the ventilation performance of street canyons of different aspect ratios and Richardson number, Building Simulation. Springer, 2009, 2: 53-61. |
| Cheng W.C., Liu C.H. and Leung Y.C., On the correlation of air and pollutant exchange for street canyons in combined wind-buoyancy-driven flow, Atmospheric Environment. 2009. |
| Cheng W.C., Liu C.H. and Leung Y.C., Periodic flow and pollutant removal of street canyon in wind-buoyancy, The 7th International Conference of Urban Climate. Yokohama, Japan, 2009, CD-Rom: 4pp. |
| Ching W.H., Leung M.K.H., Leung Y.C., Li Y. and Yuen P.L., Effect of exhaust flow rate in airborne transmitted infection in two-bed hospital room, The 5th International Workshop on Energy and Environment of Residential Buildings and The 3rd International Conference on Built Environment and Public Health, May,29-31, 2009, Guilin, China, organized by Hunan University, The University of Hong Kong and Tsinghua University. 2009. |
| Deng Y., Leung Y.C. and Leung M.K.H., A cost-effective micro wind turbine for buildings, The 5th International Workshop on Energy and Environment of Residential Buildings and The 3rd International Conference on Built Environment and Public Health, May,29-31, 2009, Guilin, China, organized by Hunan University, The University of Hong Kong and Tsinghua University. 2009. |
| Fu X.L., Long J.L., Wang X.X., Leung Y.C., Ding Z.X., Wu L., Zhang Z.Z., Li Z.H. and Fu X.Z., Photocatalytic reforming of biomass: A systematic study of hydrogen evolution from glucose solution, International Journal of Hydrogen Energy. Elesvier, 2008, 33: 6484-6491. |
| Leung M.K.H., Tham A.G. and Leung Y.C., Airfoil-blade micro wind turbines, World Renewable Energy Congress 2009 - Asia, The 3rd International Conference on Sustainable Energy and Environment, 18-23 May 2009, Bangkok, Thailand, organized by The Joint Graduate School of Energy and Environment (JGSEE), King Mongkut’s University of Technology Thonburi, Bangkok, Thailand.. 2009. |
| Leung Y.C., Wong P., Liu C.H., Vrijmoed L.L.P. and Cheung B.K.H., A study on the BVOC emissions in Hong Kong, The 7th International Conference of Urban Climate. Yokohama, Japan, 2009, CD-Rom: 4pp. |
| Leung Y.C., Leung M.K.H. and Chan A.H.S., An overview of emissions trading and its prospects in Hong Kong, In: Environmental Science & Policy, 2009, 12: 92-101. |
| Leung Y.C., Leung M.K.H., Gambarota L. and Deng Y., Application of an innovative micro-wind turbine for harnessing wind with low and high wind speeds (Abstract), U21 International Conference on Energy Technologies and Policy. UK, University of Birmingham, 2008, 1pp. |
| Leung Y.C., BVOC emissiions: adverse effects on health and a study on its emission in Hong Kong, The 1st International Workshop on Environmental Risk adn Health Care. Shanghai, China, 2009. |
| Leung Y.C., Ni M. and Leung M.K.H., Conference Proceeding Editors, The 1st International Conference on Applied Energy. Hong Kong, University of Hong Kong, 2009, 1-1600. |
| Leung Y.C., Outstanding Earth Champion 2008 , Earth Champion Foundation. 2008. |
| Li S.L., Leung M.K.H., Leung Y.C. and Ni M., Review on Development and Recent Progress of Dye-Sensitized Solar Cell Technology, Solar Energy: Research, Technology and Applications. NOVA Publishers, 2008. |
| Li X., Liu C.H. and Leung Y.C., Large-eddy simulation of flow and pollutant dispersion in high aspect ratio urban street canyons with wall model, Boundary-layer Meteorology. Springer Netherlands, 2008, 129: 249-268. |
| Li X., Liu C.H. and Leung Y.C., Numerical investigation of pollutant transport characteristics inside deep urban street canyons, Atmospheric Environment. Elsevier, 2009, 43: 2410–2418. |
| Li X.X., Koh T.Y., Britter R., Liu C.H., Norford L.K., Entekhabi D. and Leung Y.C., Large-eddy simulation of flow field and pollutant dispersion in urban street canyons under unstable atmosphere, The 7th International Conference of Urban Climate. Yokohama, Japan, 2009, CD-Rom: 4pp. |
| Memon R.A., Leung Y.C. and Liu C.H., Effects of Building Aspect Ratios and Wind Speed on the Air Temperature in Urban-Like Street Canyons , Building and Environment. 2009. |
| Ni M., Leung Y.C. and Leung M.K.H., A complete polarization model for carbon dioxide electrolysis for oxygen production, The First Regional Electrochemistry Meeting of South-East Asia REMSEA 2008, 5-7 August 2008, Singapore. 2008. |
| Ni M., Leung Y.C. and Leung M.K.H., An improved electrochemical model for the NH3 fed proton conducting solid oxide fuel cells at intermediate temperatures, Journal of Power Sources. Elsevier, 2008, 185: 233-240. |
| Ni M., Leung Y.C. and Leung M.K.H., An isothermal 1D model of ammonia fed solid oxide fuel cells based on proton conducting electrolyte, The First Regional Electrochemistry Meeting of South-East Asia REMSEA 2008, 5-7 August 2008, Singapore. 2008. |
| Ni M., Leung Y.C. and Leung M.K.H., Electrochemical Modeling of Methane Fed Solid Oxide Fuel Cells: Comparison Between Proton Conducting Electrolyte and Oxygen Ion Electrolyte, Journal of Power Sources. Elsevier, 2008, 183: 133-142. |
| Ni M., Leung Y.C. and Leung M.K.H., Electrochemical modeling and parametric study of methane fed solid oxide fuel cells, Energy Conversion and Management. Elsevier, 2009, 50: 268-278. |
| Ni M., Leung Y.C. and Leung M.K.H., Electrochemical modeling of ammonia fed solid oxide fuel cells based on proton conducting electrolyte, Journal of Power Sources. Elsevier, 2008, 183: 687-692. |
| Ni M., Leung M.K.H. and Leung Y.C., Electrochemical modeling of hydrogen production by proton-conducting solid oxide steam electrolyzer, International Journal of Hydrogen Energy. Elsevier, 2008, 33: 4040-4047. |
| Ni M., Leung M.K.H. and Leung Y.C., Energy and exergy analysis of hydrogen production by a proton exchange membrane (PEM) electrolyzer plant, Energy Conversion and Management. Elsevier, 2008, 49: 2748-2756. |
| Ni M., Leung Y.C. and Leung M.K.H., Importance of pressure gradient in solid oxide fuel cell electrodes for modeling study, Journal of Power Sources. Elsevier, 2008, 183: 668-673. |
| Ni M., Leung Y.C. and Leung M.K.H., Mathematical modeling of ammonia-fed solid oxide fuel cells with different electrolytes, International Journal of Hydrogen Energy. Elsevier, 2008, 33: 5765-5772. |
| Ni M., Leung M.K.H. and Leung Y.C., Modeling of Electrochemistry and Heat/Mass Transfer in a Tubular Solid Oxide Steam Electrolyzer for Hydrogen Production , Chemical Engineering & Technology. 2008, 31: 1319-1327. |
| Ni M., Leung Y.C. and Leung M.K.H., Thermodynamic analysis of ammonia fed solid oxide fuel cells: comparison between proton-conducting electrolyte and oxygen ion-conducting electrolyte, Journal of Power Sources. Elsevier, 2008, 183: 682-686. |
| Ni M., Leung Y.C. and Leung M.K.H., Three-dimensional modeling of planar solid oxide fuel cells based on proton conducting electrolyte, The First Regional Electrochemistry Meeting of South-East Asia REMSEA 2008, 5-7 August 2008, Singapore. 2008. |
| Wang H., Leung Y.C., Leung M.K.H. and Ni M., A review on hydrogen production using aluminum and aluminum alloys, Renewable and Sustainable Energy Reviews. 2009, 13: 845-853. |
| Wang H., Leung Y.C., Leung M.K.H. and Ni M., Modeling and analysis of an aluminium-water electrochemical generator for both electricity and hydrogen production, The First International Conference on Applied Energy, 5-7 January 2009, Hong Kong. 2009. |
| Xuan J., Leung M.K.H., Leung Y.C. and Ni M., Assessment of coating-by-parts method to determine the CO distribution in a water gas shift reactor by CFD modeling, The First International Conference on Applied Energy, 5-7 January 2009, Hong Kong. 2009. |
| Researcher : Li CH |
| List of Research Outputs |
| Chan B.P., Li C.H., Au-yeung K.L., Sze K.Y. and Ngan A.H.W., A microplate compression method for elastic modulus measurement of soft and viscoelastic collagen microspheres, Annals of Biomedical Engineering. 2008, 36(7): 1254-1267. |
| Researcher : Li SL |
| List of Research Outputs |
| Li S.L., Leung M.K.H., Leung Y.C. and Ni M., Review on Development and Recent Progress of Dye-Sensitized Solar Cell Technology, Solar Energy: Research, Technology and Applications. NOVA Publishers, 2008. |
| Li S.L., Theoretical Study of Dye-sensitized Solar Cell (DSSC), M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2009, 1-87. |
| Researcher : Li X |
| List of Research Outputs |
| Li X., Large-eddy Simulation of Wind Flow and Air Pollutant Transport Inside Urban Street Canyons of Different Aspect Ratios, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-205. |
| Li X., Liu C.H. and Leung Y.C., Large-eddy simulation of flow and pollutant dispersion in high aspect ratio urban street canyons with wall model, Boundary-layer Meteorology. Springer Netherlands, 2008, 129: 249-268. |
| Li X., Liu C.H. and Leung Y.C., Numerical investigation of pollutant transport characteristics inside deep urban street canyons, Atmospheric Environment. Elsevier, 2009, 43: 2410–2418. |
| Researcher : Li Y |
| List of Research Outputs |
| Chao C.Y.H., Wan M.P., Morawska L., Johnson G.R., Ristovski Z.D., Hargreaves M., Mengersen K., Corbett S., Li Y., Xie X. and Katoshevski D., Characterization of expiration air jets and droplet size distributions immediately at the mouth opening, Aerosol Science. Elsevier Ltd., 2009, 40: 122-133. |
| Ching W.H., Leung M.K.H., Leung Y.C., Li Y. and Yuen P.L., Effect of exhaust flow rate in airborne transmitted infection in two-bed hospital room, The 5th International Workshop on Energy and Environment of Residential Buildings and The 3rd International Conference on Built Environment and Public Health, May,29-31, 2009, Guilin, China, organized by Hunan University, The University of Hong Kong and Tsinghua University. 2009. |
| Hang J., Sandberg M. and Li Y., Age of air and air exchange efficiency in idealized city models, Building and Environment. Elsevier Ltd., 2009, 44: 1714-1723. |
| Hang J., Sandberg M. and Li Y., Effect of urban morphology on wind condition in idealized city models, Atmospheric Environment. Elsevier Ltd., 2009, 43: 869-878. |
| Li Y., Best Paper Award Indoor Air Journal 2005-2007, International Society of Indoor Air Quality and Climate. 2008. |
| Li Y., Zhuang Z. and Liu J.P., Chinese kangs and building energy consumption, Chinese Science Bulletin. Springer, 2009, 54(6): 992-1002. |
| Morawska L., Johnson G.R., Ristovski Z.D., Hargreaves M., Mengersen K., Corbett S., Chao C.Y.H., Li Y. and Katoshevski D., Size distribution and sites of origin of droplets expelled from the human respiratory tract during expiratory activities, Aerosol Science. Elsevier Ltd., 2009, 40: 256-269. |
| Qian H., Li Y., Seto W.H., Ching P., Ching W.H. and Sun H., Natural ventilation for reducing airborne infection in hospitals, Building and Environment. Elsevier Ltd., 2009, 1-7. |
| Qian H., Li Y., Nielsen P.V. and Huang X., Spatial distribution of infection risk of SARS transmission in a hospital ward, Building and Environment. Elsevier Ltd., 2009, 44: 1651-1658. |
| Shui P., Liu C.H. and Li Y., 2D Simulation of Ventilation and Pollutant Removal in Urban Street Canyons, CUHK Interdisciplinary Architectural Postgraduate Workshop 2009, 25/4/2009, Chinese University of Hong Kong. 2009. |
| Yang L. and Li Y., City ventilation of Hong Kong at no-wind conditions, Atmospheric Environment. Elsevier Ltd., 2009, 43: 3111-3121. |
| Yang L. and Li Y., Cooling load reduction by using thermal mass and night ventilation, Energy and Buildings. Elsevier B.V., 2008, 40: 2052-2058. |
| Zhou J., Zhang G., Lin Y. and Li Y., Coupling of thermal mass and natural ventilation in buildings, Energy and Buildings. Elsevier B.V., 2008, 40: 979-986. |
| Zhuang Z., Li Y., Chen B. and Guo J., Chinese kang as a domestic heating system in rural northern China - A review, Energy and Buildings. Elsevier Ltd., 2009, 41: 111-119. |
| Zhuang Z., Li Y. and Chen B., Thermal storage performance analysis on Chinese kangs, Energy and Buildings. Elsevier Ltd., 2009, 41: 452-459. |
| Researcher : Lin Y |
| List of Research Outputs |
| Lin Y., Mechanics model for actin-based motility, Physical Review E. The American Physical Society, 2009, 79: 021916. |
| Lin Y. and Freund L.B., Optimum size of a molecular bond cluster in adhesion, Physical Review E. The American Physical Society, 2008, 78: 021909. |
| Ng K.Y., Lin Y. and Ngan A.H.W., Deformation of anodic aluminum oxide nano-honeycombs during nanoindentation, Acta Materialia. Elsevier Ltd., 2009, 57: 2710-2720. |
| Researcher : Liu CH |
| List of Research Outputs |
| Cheng W.C., Liu C.H. and Leung Y.C., Computational formulation for the evaluation of street canyon ventilation and pollutant removal performance, Atmospheric Environment. Elsevier, 2008, 42: 9041-9051. |
| Cheng W.C., Liu C.H. and Leung Y.C., Estimates of Air & Pollutant Exchange for Street Canyon in Combined Wind- Buoyancy-Driven Flow Using the RANS Renormalized Group k-epsilon Model, 89th AMS Annual Conference, Phoenix, AZ, January, 11-15, 2009. |
| Cheng W.C., Liu C.H. and Leung Y.C., On the comparison of the ventilation performance of street canyons of different aspect ratios and Richardson number, Building Simulation. Springer, 2009, 2: 53-61. |
| Cheng W.C., Liu C.H. and Leung Y.C., On the correlation of air and pollutant exchange for street canyons in combined wind-buoyancy-driven flow, Atmospheric Environment. 2009. |
| Cheng W.C., Liu C.H. and Leung Y.C., Periodic flow and pollutant removal of street canyon in wind-buoyancy, The 7th International Conference of Urban Climate. Yokohama, Japan, 2009, CD-Rom: 4pp. |
| Cheung O.P. and Liu C.H., Effects of Building Interference on Natural Ventilation for High-Rise Residential Buildings, Joint Symposium – Shaping our Future Environment – The Role of Building Services Professionals, 18 November 2008 at Kowloon Shangri-la Hotel. 2008. |
| Cheung O.P. and Liu C.H., Numerical Simulation of wind flow and natural ventilation of a high-rise building cluster, CUHK Interdisciplinary Architectural Postgraduate Workshop 2009, CUHK, April 25, 2009, CUHK, 2009. |
| Leung Y.C., Wong P., Liu C.H., Vrijmoed L.L.P. and Cheung B.K.H., A study on the BVOC emissions in Hong Kong, The 7th International Conference of Urban Climate. Yokohama, Japan, 2009, CD-Rom: 4pp. |
| Li X., Liu C.H. and Leung Y.C., Large-eddy simulation of flow and pollutant dispersion in high aspect ratio urban street canyons with wall model, Boundary-layer Meteorology. Springer Netherlands, 2008, 129: 249-268. |
| Li X., Liu C.H. and Leung Y.C., Numerical investigation of pollutant transport characteristics inside deep urban street canyons, Atmospheric Environment. Elsevier, 2009, 43: 2410–2418. |
| Li X.X., Koh T.Y., Britter R., Liu C.H., Norford L.K., Entekhabi D. and Leung Y.C., Large-eddy simulation of flow field and pollutant dispersion in urban street canyons under unstable atmosphere, The 7th International Conference of Urban Climate. Yokohama, Japan, 2009, CD-Rom: 4pp. |
| Memon R.A., Leung Y.C. and Liu C.H., Effects of Building Aspect Ratios and Wind Speed on the Air Temperature in Urban-Like Street Canyons , Building and Environment. 2009. |
| Poon H.C.C., Liu C.H. and Jim C.Y., Mathematical modeling of airflow within and above vegetation canopy, CUHK Interdisciplinary Architectural Postgraduate Workshop 2009, CUHK, April 25, 2009, CUHK. 2009. |
| Shui P., Liu C.H. and Li Y., 2D Simulation of Ventilation and Pollutant Removal in Urban Street Canyons, CUHK Interdisciplinary Architectural Postgraduate Workshop 2009, 25/4/2009, Chinese University of Hong Kong. 2009. |
| Researcher : Liu S |
| List of Research Outputs |
| Hong L., Soh A.K., Liu S. and Lu L., Influence of size-dependent electrostatic energy on the ferroelectric nanodot domain structure by phase field method , Journal of Physics D - Applied Physics. England, IOP PUBLISHING LTD, 2009, 42: Art. no. 122005. |
| Researcher : Liu Y |
| List of Research Outputs |
| Liu Y., Wang M., Li Z. and Lu W.W., Biodegradation and In Vitro biological assessment of totally biodegradable TCP/PHBV composite developed for bone tissue repair, Proceedings of the 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 102-105. |
| Liu Y., Developing Bioactive and Biodegradable Composites for Bone Tissue Repair, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-253. |
| Liu Y. and Wang M., Totally biodegradable and osteoconductive composite material consisting of polyhydroxybutyrate and tricalcium phosphate for bone tissue repair, Advanced Materials Research. Switzerland, Trans Tech Publications, 2008, 47-50: 1395-1398. |
| Wang M., Liu Y., Au C.L., Lai P.K., Leung L.Y. and Chua B.H., Deformation and fracture of bone analogue biomaterials having different polymer matrices, Advanced Materials Research. Switzerland, Trans Tech Publications, 2008, 47-50: 1391-1394. |
| Researcher : Lu D |
| List of Research Outputs |
| Lu D. and Ng C.O., Interfacial capillary-gravity waves due to a fundamental singularity in a system of two semi-infinite fluids, Journal of Engineering Mathematics. Netherlands, Springer, 2008, 62(3): 233-245. |
| Researcher : Ma X |
| List of Research Outputs |
| Huang L., Ma X. and Feng L., Fan Noise Radiation in a Duct with Bulk Reactive Casing Treatment, In: Tian et al, Proceedings of Inter-Noise 2008. Article 0497. |
| Researcher : Ma Y |
| List of Research Outputs |
| Ma Y. and Ng C.O., Dispersion due to oscillatory flow through a prestressed viscoelastic tube with a retentive and absorptive wall, Proceedings of the 13th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 5th Jiangsu-Hong Kong Forum on Mechanics and Its Application, and Symposium on the Development of Mechanics in Macau, Hong Kong and Macau, March 13-14. Hong Kong, HKSTAM, 2009, 45. |
| Ma Y. and Ng C.O., Wave propagation and induced steady streaming in viscous fluid contained in a prestressed viscoelastic tube, Physics of Fluids. New York, USA, AIP, 2009, 21(5): 051901. |
| Ma Y. and Ng C.O., Wave propagation and induced steady streaming in viscous fluid contained in a prestressed viscoelastic tube, Proceedings of the 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Blacksburg, Virginia, USA, June 24–27. ASCE, ASME, SES, 2009, 7-8. |
| Ma Y. and Ng C.O., Wave propagation through a viscous fluid contained in a prestressed viscoelastic tube, Proceedings of the ASME 28th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2009, Honolulu, Hawaii, USA, May 31–June 5. USA, ASME, 2009, 10pp. |
| Researcher : Memon RA |
| List of Research Outputs |
| Memon R.A., Leung Y.C. and Liu C.H., Effects of Building Aspect Ratios and Wind Speed on the Air Temperature in Urban-Like Street Canyons , Building and Environment. 2009. |
| Memon R.A., Statistical Analysis of Urban Heat Island and Modeling of Heat Generation Within Street Canyon, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2009, 1-142. |
| Researcher : Memon RA |
| List of Research Outputs |
| Memon R.A., Leung Y.C. and Liu C.H., Effects of Building Aspect Ratios and Wind Speed on the Air Temperature in Urban-Like Street Canyons , Building and Environment. 2009. |
| Memon R.A., Statistical Analysis of Urban Heat Island and Modeling of Heat Generation Within Street Canyon, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2009, 1-142. |
| Researcher : Murthy PVSN |
| List of Research Outputs |
| Shaw S., Gorla R.S.R., Murthy P.V.S.N. and Ng C.O., Pulsatile Casson fluid flow through a stenosed bifurcated artery, International Journal of Fluid Mechanics Research. CT, USA, Begell House, 2009, 36(1): 43-63. |
| Researcher : Ng CO |
| List of Research Outputs |
| Kandaswamy P., Nithyadevi N. and Ng C.O., Natural convection in enclosures with partially thermally active side walls containing internal heat sources, Physics of Fluids. New York, USA, AIP, 2008, 20(9): 097104. |
| Kandaswamy P., Eswaramurthi M. and Ng C.O., Transient buoyancy-driven convection of water around 4ºC in a porous cavity with internal heat generation, Physics of Fluids. New York, USA, AIP, 2008, 20(8): 087104. |
| Lu D. and Ng C.O., Interfacial capillary-gravity waves due to a fundamental singularity in a system of two semi-infinite fluids, Journal of Engineering Mathematics. Netherlands, Springer, 2008, 62(3): 233-245. |
| Ma Y. and Ng C.O., Dispersion due to oscillatory flow through a prestressed viscoelastic tube with a retentive and absorptive wall, Proceedings of the 13th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 5th Jiangsu-Hong Kong Forum on Mechanics and Its Application, and Symposium on the Development of Mechanics in Macau, Hong Kong and Macau, March 13-14. Hong Kong, HKSTAM, 2009, 45. |
| Ma Y. and Ng C.O., Wave propagation and induced steady streaming in viscous fluid contained in a prestressed viscoelastic tube, Physics of Fluids. New York, USA, AIP, 2009, 21(5): 051901. |
| Ma Y. and Ng C.O., Wave propagation and induced steady streaming in viscous fluid contained in a prestressed viscoelastic tube, Proceedings of the 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Blacksburg, Virginia, USA, June 24–27. ASCE, ASME, SES, 2009, 7-8. |
| Ma Y. and Ng C.O., Wave propagation through a viscous fluid contained in a prestressed viscoelastic tube, Proceedings of the ASME 28th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2009, Honolulu, Hawaii, USA, May 31–June 5. USA, ASME, 2009, 10pp. |
| Ng C.O., Best Teacher Award 2008-09, Faculty of Engineering, The University of Hong Kong. 2009. |
| Ng C.O. and Rudraiah N., Convective diffusion in steady flow through a tube with a retentive and absorptive wall, Physics of Fluids. New York, USA, AIP, 2008, 20(7): 073604. |
| Ng C.O., Editorial Advisory Board Member, since December 2007, The Open Ocean Engineering Journal. Bentham Science Publishers, 2008. |
| Ng C.O., Editorial Advisory Board Member, since October 2007, The Open Oceanography Journal. Bentham Science Publishers, 2008. |
| Ng C.O., Rudraiah N. and Nagaraj C., Electrohydrodynamic pulsatile flow in a channel bounded by porous layer of smart material, International Journal of Engineering Science. Oxford, U.K., Elsevier Science Ltd., 2009, 47(1): 103–115. |
| Ng C.O., Rudraiah N. and Devaraju N., Electrohydrodynamic pulsating flow in a pipe in the presence of transverse electric field, International Journal of Applied Mathematics and Engineering Sciences. New Delhi, India, Serials Publications, 2008, 2(2): 143–156. |
| Ng C.O., Invited (international) Editorial Board Committee Member, since August 2003, Journal of Hydrodynamics. Shanghai, China, Publishing House for Journal of Hydrodynamics, 2008. |
| Ng C.O., Mechanics of Water Waves over a Viscoelastic Muddy Bed, Invited Seminar in the Department of Civil and Environmental Engineering, University of Macau, Macau, January 21. 2009. |
| Ng C.O., Member of the Editorial Board, since July 2006, Engineering Applications of Computational Fluid Mechanics. Hong Kong, The Hong Kong Polytechnic University, 2008. |
| Ng C.O., On the calculation of properties of water waves over a layered muddy bed, Proceedings of the Nineteenth (2009) International Offshore (Ocean) and Polar Engineering Conference, Osaka, Japan, June 21–26. USA, ISOPE, 2009, 1313–1320. |
| Ng C.O. and Chiu H.S., Solving the problem of water waves over a stratified muddy bed by Mathcad, Proceedings of the 12th Asian Congress of Fluid Mechanics, Daejeon, Korea, August 18–21. Korea, The Korean Society of Computational Fluids Engineering, 2008, CD-ROM: 4pp. |
| Ng C.O. and Wang C.Y., Stokes shear flow over a grating: implications for superhydrophobic slip, Physics of Fluids. New York, USA, AIP, 2009, 21(1): 013602. |
| Ng C.O. and Chiu H.S., Use of Mathcad as a calculation tool for water waves over a stratified muddy bed, Coastal Engineering Journal. Singapore, World Scientific, 2009, 51(1): 69-79. |
| Rudraiah N. and Ng C.O., Marangoni magneto electroconvection in a poorly conducting fluid-saturated porous layer cooled from below in the presence of the electric and magnetic fields, Proceedings of the 12th Asian Congress of Fluid Mechanics, Daejeon, Korea, August 18–21. Korea, The Korean Society of Computational Fluids Engineering, 2008, CD-ROM: 4pp. |
| Shaw S., Gorla R.S.R., Murthy P.V.S.N. and Ng C.O., Pulsatile Casson fluid flow through a stenosed bifurcated artery, International Journal of Fluid Mechanics Research. CT, USA, Begell House, 2009, 36(1): 43-63. |
| Soh A.K. and Ng C.O., Co-Editors, Proceedings of the 13th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 5th Jiangsu-Hong Kong Forum on Mechanics and Its Application, and Symposium on the Development of Mechanics in Macau, March 13-14, 2009, Hong Kong and Macau. Hong Kong, HKSTAM, 2009. |
| Tang X., Huang S., Ng C.O. and Li Z., Enhancement of nitrogen and phosphorus removal in pilot-scale vertical subsurface flow-constructed wetlands using polypropylene pellets, Environmental Engineering Science. NY, USA, Mary Ann Liebert, 2009, 26(3): 621–631. |
| Xu H., Bai Y. and Ng C.O., Nonlinear mechanism of bed load transport, Transactions of Tianjin University. Tianjin, China, Tianjin University, 2009, 15(2): 126–129. |
| Researcher : Ng KS |
| List of Research Outputs |
| Ng K.S. and Ngan A.H.W., Breakdown of Schmid's law in micropillars, Scripta Materialia. Elsevier, 2008, 59: 796-799. |
| Ng K.S., Plastic Deformation of Aluminium Micro-specimens, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-340. |
| Ng K.S. and Ngan A.H.W., Trapping Dislocations Inside Small Crystals Strengthens and Smoothens Their Deformation, Invited Lecture, 2nd International Conference from Nanoparticles & Nanomaterials to Nanodevices & Nanosystems, Hakkidiki, Rhodes Island, Greece, June 28-July 3, 2009.. 2009. |
| Researcher : Ng KS |
| List of Research Outputs |
| Ng K.S. and Ngan A.H.W., Breakdown of Schmid's law in micropillars, Scripta Materialia. Elsevier, 2008, 59: 796-799. |
| Ng K.S., Plastic Deformation of Aluminium Micro-specimens, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-340. |
| Ng K.S. and Ngan A.H.W., Trapping Dislocations Inside Small Crystals Strengthens and Smoothens Their Deformation, Invited Lecture, 2nd International Conference from Nanoparticles & Nanomaterials to Nanodevices & Nanosystems, Hakkidiki, Rhodes Island, Greece, June 28-July 3, 2009.. 2009. |
| Researcher : Ng KY |
| List of Research Outputs |
| Ng K.Y., An Investigaton of the Deformation of Anodic Aluminium Oxide Nano-honeycmb During Nanoindentation, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2009, 1-146. |
| Ng K.Y., Lin Y. and Ngan A.H.W., Deformation of anodic aluminum oxide nano-honeycombs during nanoindentation, Acta Materialia. Elsevier Ltd., 2009, 57: 2710-2720. |
| Researcher : Ng KY |
| List of Research Outputs |
| Ng K.Y., An Investigaton of the Deformation of Anodic Aluminium Oxide Nano-honeycmb During Nanoindentation, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2009, 1-146. |
| Ng K.Y., Lin Y. and Ngan A.H.W., Deformation of anodic aluminum oxide nano-honeycombs during nanoindentation, Acta Materialia. Elsevier Ltd., 2009, 57: 2710-2720. |
| Researcher : Ngan AHW |
| List of Research Outputs |
| Aladin Kaderbatcha D.M., Lu W.W., Ngan A.H.W., Cheung K.M.C., Chan D. and Luk K.D.K., Nano-scale morphology of disc collagens and their correlation with disc mechanics, 28th Annual Congress of the Hong Kong Orthopaedic Association, Hong Kong, November 29-30, 2008. |
| Cao Z.H., Lu H.M., Meng X.K. and Ngan A.H.W., Indentation size dependent plastic deformation of nanocrystalline and ultrafine grain Cu films at nanoscale, Journal of Applied Physics. American Institute of Physics, 2009, 105: 083521-1 - 083521-4. |
| Chan B.P., Li C.H., Au-yeung K.L., Sze K.Y. and Ngan A.H.W., A microplate compression method for elastic modulus measurement of soft and viscoelastic collagen microspheres, Annals of Biomedical Engineering. 2008, 36(7): 1254-1267. |
| Chan Y.L., Ngan A.H.W. and King N.M., Use of focused ion beam milling for investigating the mechanical properties of biological tissues: A study of human primary molars, Journal of the Mechanical Behavior of Biomedical Materials. Elsevier Ltd., 2009, 2: 375-383. |
| Gibson I., Chow S.P., Lam K.W., Lu W.W., Ngan A.H.W., Ip W.Y. and Chiu P.K.Y., The development of an artificial finger joint, P Bartolo, B Bidanda (Editors): "Biomaterials and prototyping applications in medicine". Springer, 2008, 157-190. |
| Li C.H., Ngan A.H.W., Sze K.Y. and Chan B.P., Association study between elastic modulus and extracellular matrix components of collagen-mesenchymal stem cell microspheres during chondrogenic differentiation, Biomaterials Asia 2009. Hogn Kong, PA18. |
| Li Z., Lu W.W., Chiu P.K.Y., Lam W.M., Tang B., Ngan A.H.W., Fang D., Cheung K.M.C., Leong J.C.Y. and Luk K.D.K., Architectural and mechanical properties of cancellous bone with strontium treatment in osteoporotic goats (abstract number 17444), SICOT/SIROT 2008 XXIV World Congress. 2008. |
| Li Z., Lu W.W., Chiu P.K.Y., Lam R.W.M., Tang B., Ngan A.H.W., Fang D., Cheung K.M.C., Leong J.C.Y. and Luk K.D.K., Architectural and mechanical properties of cancellous bone with strontium treatment in osteoporotic goats, SICOT/SIROT 2008 XXIV Triennial World Congress, Hong Kong, August 24-28, 2008. |
| Ng K.S. and Ngan A.H.W., Breakdown of Schmid's law in micropillars, Scripta Materialia. Elsevier, 2008, 59: 796-799. |
| Ng K.S. and Ngan A.H.W., Trapping Dislocations Inside Small Crystals Strengthens and Smoothens Their Deformation, Invited Lecture, 2nd International Conference from Nanoparticles & Nanomaterials to Nanodevices & Nanosystems, Hakkidiki, Rhodes Island, Greece, June 28-July 3, 2009.. 2009. |
| Ng K.Y., Lin Y. and Ngan A.H.W., Deformation of anodic aluminum oxide nano-honeycombs during nanoindentation, Acta Materialia. Elsevier Ltd., 2009, 57: 2710-2720. |
| Ngan A.H.W., Athermal Statistical Mechanics for Material Elastostatics and Deformation, Invited Paper, MMM 2008 - Multiscale Materials Modeling 4th International Conference, October 27-31, 2008, Tallahassee, Florida, USA. 2008. |
| Ngan A.H.W., Canonical ensemble for static elastic structures with random microstructures, Journal of the Mechanics and Physics of Solids. Elsevier Ltd., 2009, 57: 803-811. |
| Ngan A.H.W., Croucher Senior Research Fellowship, Croucher Foundation. 2009. |
| Ngan A.H.W., Doctor of Science (DSc) - Higher Doctorate, University of Birmingham. 2008. |
| Ngan A.H.W., Wang H.T., Tang B. and Sze K.Y., Most Cited Author 2005-2008, International Journal of Solids and Structures. 2009. |
| Ngan A.H.W. and Tang B., Response of power-law-viscoelastic and time-dependent materials to rate jumps, Journal of Materials Research. Materials Research Society, 2009, 24(3): 853-862. |
| Ngan A.H.W., Small Scale Plasticity – an ad hoc Review, Invited Lecture at Workshop on Processing, Microstructure and Performance of Materials, Auckland, New Zealand, April 8-9, 2009.. 2009. |
| Ngan A.H.W., Statistical Aspects of Yield Strength of Micro-pillars, Keynote Lecture, The 15th International Symposium on Plasticity and Its Current Applications, to be held in St. Thomas, US Virgin Islands, Jan. 3-8, 2009.. 2009. |
| Tang B. and Ngan A.H.W., A Novel Scheme For Quantitative Measurement Of The Elastic Modulus Of Materials At Nanoscale Using Atomic Force Microscope, International Conference On Materials For Advanced Technologies (icmat) 2009. |
| Tang B., Ngan A.H.W. and Pethica J.B., A method to quantitatively measure the elastic modulus of materials in nanometer scale using atomic force microscopy, Nanotechnology. IOP Publishing Ltd, 2008, 19: 495713-495719. |
| Wen M., An B., Yokogawa K. and Ngan A.H.W., Thermally activated model for tensile yielding of pristine single-walled carbon nanotubes with nonlinear elastic deformation, Carbon. Elsevier Ltd., 2009, 47: 2070-2076. |
| Wo P.C., Jones I.P. and Ngan A.H.W., TEM study of the deformation structures around nano-scratches, Philosophical Magazine. Taylor & Francis, 2008, 88(9): 1369-1388. |
| Researcher : Ni M |
| List of Research Outputs |
| Leung Y.C., Ni M. and Leung M.K.H., Conference Proceeding Editors, The 1st International Conference on Applied Energy. Hong Kong, University of Hong Kong, 2009, 1-1600. |
| Li S.L., Leung M.K.H., Leung Y.C. and Ni M., Review on Development and Recent Progress of Dye-Sensitized Solar Cell Technology, Solar Energy: Research, Technology and Applications. NOVA Publishers, 2008. |
| Ni M., Leung Y.C. and Leung M.K.H., A complete polarization model for carbon dioxide electrolysis for oxygen production, The First Regional Electrochemistry Meeting of South-East Asia REMSEA 2008, 5-7 August 2008, Singapore. 2008. |
| Ni M., Leung Y.C. and Leung M.K.H., An improved electrochemical model for the NH3 fed proton conducting solid oxide fuel cells at intermediate temperatures, Journal of Power Sources. Elsevier, 2008, 185: 233-240. |
| Ni M., Leung Y.C. and Leung M.K.H., An isothermal 1D model of ammonia fed solid oxide fuel cells based on proton conducting electrolyte, The First Regional Electrochemistry Meeting of South-East Asia REMSEA 2008, 5-7 August 2008, Singapore. 2008. |
| Ni M., Leung Y.C. and Leung M.K.H., Electrochemical Modeling of Methane Fed Solid Oxide Fuel Cells: Comparison Between Proton Conducting Electrolyte and Oxygen Ion Electrolyte, Journal of Power Sources. Elsevier, 2008, 183: 133-142. |
| Ni M., Leung Y.C. and Leung M.K.H., Electrochemical modeling and parametric study of methane fed solid oxide fuel cells, Energy Conversion and Management. Elsevier, 2009, 50: 268-278. |
| Ni M., Leung Y.C. and Leung M.K.H., Electrochemical modeling of ammonia fed solid oxide fuel cells based on proton conducting electrolyte, Journal of Power Sources. Elsevier, 2008, 183: 687-692. |
| Ni M., Leung M.K.H. and Leung Y.C., Electrochemical modeling of hydrogen production by proton-conducting solid oxide steam electrolyzer, International Journal of Hydrogen Energy. Elsevier, 2008, 33: 4040-4047. |
| Ni M., Leung M.K.H. and Leung Y.C., Energy and exergy analysis of hydrogen production by a proton exchange membrane (PEM) electrolyzer plant, Energy Conversion and Management. Elsevier, 2008, 49: 2748-2756. |
| Ni M., Leung Y.C. and Leung M.K.H., Importance of pressure gradient in solid oxide fuel cell electrodes for modeling study, Journal of Power Sources. Elsevier, 2008, 183: 668-673. |
| Ni M., Leung Y.C. and Leung M.K.H., Mathematical modeling of ammonia-fed solid oxide fuel cells with different electrolytes, International Journal of Hydrogen Energy. Elsevier, 2008, 33: 5765-5772. |
| Ni M., Leung M.K.H. and Leung Y.C., Modeling of Electrochemistry and Heat/Mass Transfer in a Tubular Solid Oxide Steam Electrolyzer for Hydrogen Production , Chemical Engineering & Technology. 2008, 31: 1319-1327. |
| Ni M., Leung Y.C. and Leung M.K.H., Thermodynamic analysis of ammonia fed solid oxide fuel cells: comparison between proton-conducting electrolyte and oxygen ion-conducting electrolyte, Journal of Power Sources. Elsevier, 2008, 183: 682-686. |
| Ni M., Leung Y.C. and Leung M.K.H., Three-dimensional modeling of planar solid oxide fuel cells based on proton conducting electrolyte, The First Regional Electrochemistry Meeting of South-East Asia REMSEA 2008, 5-7 August 2008, Singapore. 2008. |
| Wang H., Leung Y.C., Leung M.K.H. and Ni M., A review on hydrogen production using aluminum and aluminum alloys, Renewable and Sustainable Energy Reviews. 2009, 13: 845-853. |
| Wang H., Leung Y.C., Leung M.K.H. and Ni M., Modeling and analysis of an aluminium-water electrochemical generator for both electricity and hydrogen production, The First International Conference on Applied Energy, 5-7 January 2009, Hong Kong. 2009. |
| Xuan J., Leung M.K.H., Leung Y.C. and Ni M., Assessment of coating-by-parts method to determine the CO distribution in a water gas shift reactor by CFD modeling, The First International Conference on Applied Energy, 5-7 January 2009, Hong Kong. 2009. |
| Researcher : Poon HCC |
| List of Research Outputs |
| Poon H.C.C., Liu C.H. and Jim C.Y., Mathematical modeling of airflow within and above vegetation canopy, CUHK Interdisciplinary Architectural Postgraduate Workshop 2009, CUHK, April 25, 2009, CUHK. 2009. |
| Researcher : Qian H |
| List of Research Outputs |
| Qian H., Li Y., Seto W.H., Ching P., Ching W.H. and Sun H., Natural ventilation for reducing airborne infection in hospitals, Building and Environment. Elsevier Ltd., 2009, 1-7. |
| Qian H., Li Y., Nielsen P.V. and Huang X., Spatial distribution of infection risk of SARS transmission in a hospital ward, Building and Environment. Elsevier Ltd., 2009, 44: 1651-1658. |
| Researcher : Rudraiah N |
| List of Research Outputs |
| Ng C.O. and Rudraiah N., Convective diffusion in steady flow through a tube with a retentive and absorptive wall, Physics of Fluids. New York, USA, AIP, 2008, 20(7): 073604. |
| Ng C.O., Rudraiah N. and Nagaraj C., Electrohydrodynamic pulsatile flow in a channel bounded by porous layer of smart material, International Journal of Engineering Science. Oxford, U.K., Elsevier Science Ltd., 2009, 47(1): 103–115. |
| Ng C.O., Rudraiah N. and Devaraju N., Electrohydrodynamic pulsating flow in a pipe in the presence of transverse electric field, International Journal of Applied Mathematics and Engineering Sciences. New Delhi, India, Serials Publications, 2008, 2(2): 143–156. |
| Rudraiah N. and Ng C.O., Marangoni magneto electroconvection in a poorly conducting fluid-saturated porous layer cooled from below in the presence of the electric and magnetic fields, Proceedings of the 12th Asian Congress of Fluid Mechanics, Daejeon, Korea, August 18–21. Korea, The Korean Society of Computational Fluids Engineering, 2008, CD-ROM: 4pp. |
| Researcher : Shu Z |
| List of Research Outputs |
| Du B., Lam J., Shu Z. and Wang Z., A delay-partitioning projection approach to stability analysis of continuous systems with multiple delay components, IET Control Theory and Applications. 2009, 3(4): 383-390. |
| Du B., Lam J. and Shu Z., A delay-partitioning projection approach to stability analysis of neutral systems, IFAC World Congress 2008. Seoul, Korea, 12348-12353. |
| Du B., Lam J. and Shu Z., A matrix transformation approach to H-infinity control via static output feedback for input delay systems, 17th Mediterranean Conference on Control & Automation. Thessaloniki, Greece, 2009, 1373-1378. |
| Shu Z. and Lam J., An augmented system approach to static output-feedback stabilization with H¥ performance for continuous-time plants, International Journal of Robust and Nonlinear Control. 2009, 19(7): 768-785. |
| Shu Z., Exponential Estimates and Synthesis of Dynamic Systems with Time Delay and Stochasticity, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-259. |
| Shu Z. and Lam J., Global exponential estimates of stochastic interval neural networks with discrete and distributed delays, Neurocomputing. 2008, 71(13-15): 2950-2963. |
| Shu Z., Lam J. and Xu S., Improved exponential estimates for neutral systems, Asian Journal of Control. 2009, 11(3): 261-270. |
| Shu Z., Lam J. and Xiong J., Mixed H2/H-infinity control of discrete-time markovian jump systems via static output feedback controllers, IFAC World Congress 2008. Seoul, Korea, 5909-5914. |
| Shu Z., Lam J. and Xiong J., Non-fragile exponential stability assignment of discrete-time linear systems with missing data in actuators, IEEE Transactions on Automatic Control. 2009, 54(3): 625-630. |
| Shu Z. and Lam J., On exact exponential stability assignment of retarded delay systems via static output-feedback controllers, Recent Advances in Automation & Information: Proceedings of the 10th WSEAS International Conference on Automation & Information (ICAI'09). Prague, Czech Republic, Book Series: Recent Advances in Electrical Engineering, 2009, 58-63. |
| Shu Z., Lam J., Gao H., Du B. and Wu L., Positive observers and dynamic output-feedback controllers for interval positive linear systems, IEEE Transactions on Circuits and Systems I. 2008, 55(10): 3209-3222. |
| Wang J., Lam J., Xu S. and Shu Z., Time-multiplied guaranteed cost control of linear delay systems, Journal of Dynamic Systems, Measurement and Control. 2008, 130(6): 061007, 11 pages. |
| Wu L., Lam J., Shu Z. and Du B., Stability and stabilizability of uncertain positive delay systems: Necessary and sufficient conditions, Asian Journal of Control. 2009, 11(2): 226-234. |
| Zhang B., Lam J., Xu S. and Shu Z., Robust stabilization of uncertain T-S fuzzy time-delay systems with exponential estimates, Fuzzy Sets and Systems. 2009, 160(12): 1720-1737. |
| Researcher : Shui P |
| List of Research Outputs |
| Shui P., Liu C.H. and Li Y., 2D Simulation of Ventilation and Pollutant Removal in Urban Street Canyons, CUHK Interdisciplinary Architectural Postgraduate Workshop 2009, 25/4/2009, Chinese University of Hong Kong. 2009. |
| Researcher : Soh AK |
| List of Research Outputs |
| Chang W.S., Lim L.C., Yang P., Miao H., Tu C.S., Chen Q.M. and Soh A.K., Tetragonal micro/nanotwins in 0.91Pb(Zn1/3Nb2/3)O-3-0.09PbTiO(3) revealed by reciprocal space mapping , Applied Physics Letters. USA, AMER INST PHYSICS, 2009, 94: Art. no. 202907. |
| Chen X. and Soh A.K., Interaction of Gaussian beams propagating beyond the paraxial approximation with left-handed materials slabs, In: Soh, AK; Ng, CO, The 13th Annual Conference of HKSTAM, the 5th Jiangsu-Hong Kong Forum on Mechanics and its application and Symposium on the Development of Mechanics in Macau. Hong Kong, HKSTAM, 2009, 1: 28. |
| Hong L., Soh A.K., Liu S. and Lu L., Influence of size-dependent electrostatic energy on the ferroelectric nanodot domain structure by phase field method , Journal of Physics D - Applied Physics. England, IOP PUBLISHING LTD, 2009, 42: Art. no. 122005. |
| Hong L., Soh A.K., Song Y. and Lim L.C., Interface and surface effects on ferroelectric nano-thin films, Acta Materialia. UK, Pergamon-Elsevier, 2008, 56(13): 2966-2974. |
| Hong L. and Soh A.K., Modeling of the influence of oxygen vacancy diffusion on the fatigue property of ferroelectric single crystals, In: Kim, KW; Kitamura, K; Lu, L; Xue, DF, International Conference on Advances in Functional Materials. China, Dalian University of Technology, 2009, 1: 15. |
| Hong L. and Soh A.K., Modeling of the influence of oxygen vacancy diffusion on the fatigue property of ferroelectric single crystals, In: K.W. Kim, K. Kitamura, L. Lu, D.F. Xue, International Conference on Advances in Functional Materials. China, Dalian University of Technology, 2009, 1: 15. |
| Liu J.X., Zhao X., Soh A.K. and Wang B.L., Thickness-edge modes in a semi-infinite magneto-electro-elastic plate, Philosophical Magazine Letters. England, TAYLOR & FRANCIS LTD, 2009, 89: 155-161. |
| Soh A.K. and Song Y., Anisotropic polling and piezoelectric behaviors in rhombohedral ferroelectric single crystals , In: Denier, J.; Finn, M.D.; Mattner, T., 22nd International Congress of theoretical and applied mechanics (ICTAM 2008). Australia, IUTAM, 2008, 1: 294. |
| Soh A.K. and Song Y., Anisotropic polling and piezoelectric behaviors in rhombohedral ferroelectric single crystals , In: Denier, J.; Finn, M.D.; Mattner, T., XXII International Congress of Theoretical and Applied Mechanics. Australia, IUTAM, 2008, 1: 294. |
| Soh A.K. and Ng C.O., Co-Editors, Proceedings of the 13th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 5th Jiangsu-Hong Kong Forum on Mechanics and Its Application, and Symposium on the Development of Mechanics in Macau, March 13-14, 2009, Hong Kong and Macau. Hong Kong, HKSTAM, 2009. |
| Soh A.K., Song Y. and Zhao X., Crack Tip Domain Switching in Normal and Relaxor Ferroelectrics Subjected to Mechanical and Electric Loading, International Conference on Materials for Advanced Technologies 2009. 2009. |
| Soh A.K., Visiting Professorship, National University of Singapore. 2008. |
| Soh A.K., Visiting Professorship, National University of Singapore. 2009. |
| Yan K. and Soh A.K., Effects of grain boundary cavities on the thermal resistance under ultrashort laser pulse, JOURNAL OF PHYSICS D - APPLIED PHYSICS . UK, IOP PUBLISHING, 2008, 41(15): Art. No. 155401. |
| Yan K. and Soh A.K., Simulation of surface effects on the intrinsic dissipation of nanooscillators, Philosophical Magazine Letters. England, TAYLOR & FRANCIS LTD, 2009, 89: 51-58. |
| Zhao X. and Soh A.K., Influence of dipole defects on polarization switching in the vicinity of a crack in relaxor ferroelectrics, In: Soh, AK; Ng, CO , The 13th Annual Conference of HKSTAM, the 5th Jiangsu-Hong Kong Forum on Mechanics and its application and Symposium on the Development of Mechanics in Macau. Hong Kong, HKSTAM, 2009, 1: 27. |
| Zhuang H., Zheng G.P. and Soh A.K., Interactions between transition metals and defective carbon nanotubes, Computational Materials Science. NETHERLANDS, ELSEVIER SCIENCE BV, 2008, 43: 823-828. |
| Researcher : Song Y |
| List of Research Outputs |
| Hong L., Soh A.K., Song Y. and Lim L.C., Interface and surface effects on ferroelectric nano-thin films, Acta Materialia. UK, Pergamon-Elsevier, 2008, 56(13): 2966-2974. |
| Soh A.K. and Song Y., Anisotropic polling and piezoelectric behaviors in rhombohedral ferroelectric single crystals , In: Denier, J.; Finn, M.D.; Mattner, T., 22nd International Congress of theoretical and applied mechanics (ICTAM 2008). Australia, IUTAM, 2008, 1: 294. |
| Soh A.K. and Song Y., Anisotropic polling and piezoelectric behaviors in rhombohedral ferroelectric single crystals , In: Denier, J.; Finn, M.D.; Mattner, T., XXII International Congress of Theoretical and Applied Mechanics. Australia, IUTAM, 2008, 1: 294. |
| Soh A.K., Song Y. and Zhao X., Crack Tip Domain Switching in Normal and Relaxor Ferroelectrics Subjected to Mechanical and Electric Loading, International Conference on Materials for Advanced Technologies 2009. 2009. |
| Researcher : Sultana N |
| List of Research Outputs |
| Sultana N., Wong L.S. and Wang M., Fabrication and evaluation of polyhydroxybutyrate and Hydroxyapatite/Polyhydroxybutyrate composite scaffolds for tissue engineering applications, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 11. |
| Sultana N. and Wang M., In vitro degradation and protein adsorption characteristics of PHBV/PLLA blends and PHBV/PLLA-based tissue engineering scaffolds, Advanced Materials Research. Switzerland, Trans Tech Publications, 2008, 47-50: 1399-1402. |
| Sultana N. and Wang M., PHBV/PLLA-based composite acaffolds containing nano-sized calcium phosphate particles for bone tissue engineering, Journal of Experimental Nanoscience. Taylor & Francis, 2008, 3(2): 121-132. |
| Researcher : Sun H |
| List of Research Outputs |
| Qian H., Li Y., Seto W.H., Ching P., Ching W.H. and Sun H., Natural ventilation for reducing airborne infection in hospitals, Building and Environment. Elsevier Ltd., 2009, 1-7. |
| Researcher : Sun T |
| List of Research Outputs |
| Sun T., Wang L.P. and Wang M., A comparative study of (Ti-O)/Ti and (Ti-O-N)/Ti composite coatings for NiTi shape memory alloy for medical applications, Proceedings of the 12th Annual Conference on Ceramics, Cells and Tissues. Faenza, Italy, 2009, 1pp. |
| Sun T. and Wang M., Apatite/TiO2 composite coatings formed on Ti, Ti-6Al-4V and NiTi shape memory alloy, Proceedings of the 7th International Conference on Materials Processing for Properties and Performance. Singapore, 2008, 3pp. |
| Sun T. and Wang M., Characteristics and chemical stability of bioactive titania gel formed on Ti, Ti-6Al-4V and NiTi SMA through a low temperature oxidation process, Advanced Materials Research. Switzerland, Trans Tech Publications, 2008, 47-50: 1403-1406. |
| Sun T. and Wang M., Low-temperature biomimetic formation of apatite/TiO2 composite coatings on Ti and NiTi shape memory alloy and their characterization, Applied Surface Science. The Netherlands, Elsevier, 2008, 255: 396-400. |
| Sun T. and Wang M., Mechanical performance of apatite/TiO2 composite coatings formed on Ti and NiTi shape memory alloy, Applied Surface Science. The Netherlands, Elsevier, 2008, 255: 404-408. |
| Sun T., Cheung H.M. and Wang M., Surface modification of NiTi shape memory alloy by forming a bioactive titania layer through a low temperature process, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 14. |
| Researcher : Sze KY |
| List of Research Outputs |
| Au-yeung K.L., Sze K.Y., Sham M.H. and Chan B.P., Development of a micromanipulator-based loading device for mechanoregulation study of human mesenchymal stem cells in 3D collagen constructs, Tissue Engineering, Part C. 2009, 15: 1-15. |
| Chan B.P., Li C.H., Au-yeung K.L., Sze K.Y. and Ngan A.H.W., A microplate compression method for elastic modulus measurement of soft and viscoelastic collagen microspheres, Annals of Biomedical Engineering. 2008, 36(7): 1254-1267. |
| Chen S.H., Chen J.H. and Sze K.Y., A new perturbation procedure for limit cycle analysis in three-dimensional nonlinear autonomous dynamical systems, Nonlinear Dynamics. 2009, 56(3): 255-268. |
| Chik T.K., Luk K.D.K., Cheung K.M.C., Sze K.Y. and Chan B.P., Creation of a tissue interface between bone-like construct and soft tissue-like construct, Biomaterials Asia 2009. Hong Kong, PA17. |
| Fan H., Chen Y. and Sze K.Y., Phenomenological modeling for pore opening, closure and rupture of the GUV membrane, International Journal of Applied Mechanics. 2009, 1: 327-338. |
| Li C.H., Ngan A.H.W., Sze K.Y. and Chan B.P., Association study between elastic modulus and extracellular matrix components of collagen-mesenchymal stem cell microspheres during chondrogenic differentiation, Biomaterials Asia 2009. Hogn Kong, PA18. |
| Liu X.H. and Sze K.Y., A corotational interpolatory model for fabric drape simulation, International Journal for Numerical Methods in Engineering. 2009, 77(6): 799-823. |
| Ngan A.H.W., Wang H.T., Tang B. and Sze K.Y., Most Cited Author 2005-2008, International Journal of Solids and Structures. 2009. |
| Sze K.Y. and Cheung Y.K., A hybrid-Trefftz finite element model for Helmholtz problem, Communications in Numerical Methods in Engineering. 2008, 24(12): 2047-2060. |
| Sze K.Y., Editor (Mechanical), Transactions of HKIE. HKIE, 2008. |
| Wu D., Sze K.Y. and Lo S.H., Two- and Three-dimensional transition elements for adaptive refinement analysis of elasticity problems, International Journal for Numerical Methods in Engineering. 2008, available on line. |
| Researcher : Tan J |
| List of Research Outputs |
| Tan J., Investigation of a Novel Liquid Desticcant Cooling System, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-143. |
| Researcher : Tan ST |
| List of Research Outputs |
| Kou X., Liu X.C. and Tan S.T., Quadtree Based Mouse Trajectory Analysis for efficacy evaluation of Voice-enabled CAD , 2009 IEEE International Conference on Virtual Environments, Human-Computer Interfaces and Measurement Systems, Hong Kong. 2009. |
| Kou X. and Tan S.T., Robust and efficient algorithms for rapid prototyping of heterogeneous objects, Journal of Rapid Prototyping. 2009, 15: 5-18. |
| Xue S., Kou X. and Tan S.T., Natural Voice-Enabled CAD: Modeling via Natural Discourse, Computer-Aided Design and Applications. 2009. |
| Researcher : Tan X |
| List of Research Outputs |
| Tan X., Optimization and Stability Analysis on Light-weight Multi-functional Smart Structures using Genetic Algorithms, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-131. |
| Researcher : Tang B |
| List of Research Outputs |
| Li Z., Lu W.W., Chiu P.K.Y., Lam W.M., Tang B., Ngan A.H.W., Fang D., Cheung K.M.C., Leong J.C.Y. and Luk K.D.K., Architectural and mechanical properties of cancellous bone with strontium treatment in osteoporotic goats (abstract number 17444), SICOT/SIROT 2008 XXIV World Congress. 2008. |
| Li Z., Lu W.W., Chiu P.K.Y., Lam R.W.M., Tang B., Ngan A.H.W., Fang D., Cheung K.M.C., Leong J.C.Y. and Luk K.D.K., Architectural and mechanical properties of cancellous bone with strontium treatment in osteoporotic goats, SICOT/SIROT 2008 XXIV Triennial World Congress, Hong Kong, August 24-28, 2008. |
| Ngan A.H.W., Wang H.T., Tang B. and Sze K.Y., Most Cited Author 2005-2008, International Journal of Solids and Structures. 2009. |
| Ngan A.H.W. and Tang B., Response of power-law-viscoelastic and time-dependent materials to rate jumps, Journal of Materials Research. Materials Research Society, 2009, 24(3): 853-862. |
| Tang B. and Ngan A.H.W., A Novel Scheme For Quantitative Measurement Of The Elastic Modulus Of Materials At Nanoscale Using Atomic Force Microscope, International Conference On Materials For Advanced Technologies (icmat) 2009. |
| Tang B., Ngan A.H.W. and Pethica J.B., A method to quantitatively measure the elastic modulus of materials in nanometer scale using atomic force microscopy, Nanotechnology. IOP Publishing Ltd, 2008, 19: 495713-495719. |
| Researcher : Tang L |
| List of Research Outputs |
| Tang L., Compliant Mechanism Modeling and Applications with Haptic Aided Evaluation, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-116. |
| Researcher : Tham AG |
| List of Research Outputs |
| Leung M.K.H., Tham A.G. and Leung Y.C., Airfoil-blade micro wind turbines, World Renewable Energy Congress 2009 - Asia, The 3rd International Conference on Sustainable Energy and Environment, 18-23 May 2009, Bangkok, Thailand, organized by The Joint Graduate School of Energy and Environment (JGSEE), King Mongkut’s University of Technology Thonburi, Bangkok, Thailand.. 2009. |
| Researcher : Tong HW |
| List of Research Outputs |
| Tong H.W., Wang M. and Lu W.W., Cell Interactions with surface-smooth and surface-porous fibers in electrospun fibrous tissue engineering scaffolds, Proceedings of the 12th Annual Conference on Ceramics, Cells and Tissues. Faenza, Italy, 2009, 1pp. |
| Tong H.W., Lam F.S. and Wang M., Electrospinning of porous Poly(hydroxybutrate-co-hydroxyvalerate) fibers, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 27. |
| Tong H.W., Wang M., Li Z. and Lu W.W., Micro- and nano-fibers of Poly(hydroxybutrate-co-hydroxyvalerate) formed through electrospinning and their biocompatibility assessment, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 23. |
| Researcher : Tsai HL |
| List of Research Outputs |
| Wong I., Tsai H.L. and Leung M.K.H., Experimental and modeling studies of light transmitting monolithic photocatalytic reactor for water purification, The 5th International Workshop on Energy and Environment of Residential Buildings and The 3rd International Conference on Built Environment and Public Health, May,29-31, 2009, Guilin, China, organized by Hunan University, The University of Hong Kong and Tsinghua University.. 2009. |
| Researcher : Tsui KC |
| List of Research Outputs |
| Tsui K.C., Neighborhood Ventilation of a Building Cluster by Combined Forces, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-172. |
| Researcher : Wang C |
| List of Research Outputs |
| Wang C., Cheng L. and Huang L., Realization of a broadband low-frequency plate silencer using sandwich plates, Journal of Sound and Vibration. 2008, 318: 792-808. |
| Researcher : Wang F |
| List of Research Outputs |
| Wang F., Chen K.Z., Feng X.Y. and Feng X.A., Developing a manufacturing technology for the components made of a multiphase perfect material, International Journal of Advanced Manufacturing Technology. London, UK, Springer-Verlag, 2009, 40: 837-846. |
| Researcher : Wang H |
| List of Research Outputs |
| Wang H., Leung Y.C., Leung M.K.H. and Ni M., A review on hydrogen production using aluminum and aluminum alloys, Renewable and Sustainable Energy Reviews. 2009, 13: 845-853. |
| Wang H., Leung Y.C., Leung M.K.H. and Ni M., Modeling and analysis of an aluminium-water electrochemical generator for both electricity and hydrogen production, The First International Conference on Applied Energy, 5-7 January 2009, Hong Kong. 2009. |
| Researcher : Wang H |
| List of Research Outputs |
| Wang H., Leung Y.C., Leung M.K.H. and Ni M., A review on hydrogen production using aluminum and aluminum alloys, Renewable and Sustainable Energy Reviews. 2009, 13: 845-853. |
| Wang H., Leung Y.C., Leung M.K.H. and Ni M., Modeling and analysis of an aluminium-water electrochemical generator for both electricity and hydrogen production, The First International Conference on Applied Energy, 5-7 January 2009, Hong Kong. 2009. |
| Researcher : Wang L |
| List of Research Outputs |
| Bai C. and Wang L., Constructal design of particle volume fraction in nanofluids, Journal of Heat Transfer. 2009, 131: 112402/1-112402/7. |
| Bai C., Wang L. and Cheng L., Remarks on microfluidic fabrication of nano-/subnano-liter droplets, Current Nanoscience. 2009, 5: 353-357. |
| Cheng L., Xu M.T. and Wang L., From Boltzmann transport equation to single-phase-lagging heat conduction, International Journal of Heat and Mass Transfer. 2008, 51: 6018-6023. |
| Cheng L., Xu M.T. and Wang L., Single- and dual-phase-lagging heat conduction models in moving media, Journal of Heat Transfer. 2008, 130: 121302/1-121302/6. |
| Cheng L., Xu M.T. and Wang L., Thermal vibration phenomenon of single phase lagging heat conduction and its thermodynamic basis, Chinese Science Bulletin. 2008, 53: 3597-3602. |
| Di Q.Q., Yang J.H., Zhao J. and Wang L., The role of aperture in the extraction of functional components from plant materials, 2009 ASME Summer Heat Transfer Conference. ASME, 2009, HT2009-88388. |
| Fan J. and Wang L., Macroscale heat transfer in nanofluids, Proceedings of 17 th International Conference on Composites or Nano Engineering. Honolulu, USA, 2009, 233-235. |
| Fan J. and Wang L., Microstructural effects on macroscale thermal properties in nanofluids, 2009 ASME Summer Heat Transfer Conference. ASME, 2009, HT2009-88649. |
| Fan J. and Wang L., Nanofluids heat conduction: numerical simulation, Proceedings of 5th International Conference on Diffusion in Solids and Liquids. DSL, 2009, 2009-228.1. |
| Wang L., Advances in Transport Phenomena 2009. Heidelberg, Springer-Verlag, 2009, 1-250. |
| Wang L., Xu M.T. and Wei X., Dual-phase-lagging and porous-medium heat conduction processes, Emerging Topics in Heat and Mass Transfer in Porous Media - from Bioengineering and Microelectronics to Nanotechnology, In: P. Vadasz, Theory and Applications of Transport in Porous Media. Berlin, Germany, Springer-Verlang, 2008, 22: 1-37. |
| Wang L., Xu M.T. and Wei X., Dual-phase-lagging and porous-medium heat conduction processes, In: P. Vadasz, Emerging Topics in Heat and Mass Transfer in Porous Media - from Bioengineering and Microelectronics to Nanotechnology, Theory and Applications of Transport in Porous Media. Berlin, Springer-Verlag, 2008, 22: 1-38. |
| Wang L. and Wei X., Erratum: Nanofluids: Synthesis, Heat Conduction, and Extension, Journal of Heat Transfer. 2009, 131(3): 033102. |
| Wang L., Frontier in nanofluids, Proceedings of 5th International Conference on Diffusion in Solids and Liquids. DSL, 2009, 2009-228. |
| Wang L., Zhou X.S. and Wei X., Heat Conduction: Mathematical Models and Analytical Solutions. Heidelberg, Springer-Verlag, 2008, 1-515. |
| Wang L. and Wei X., Heat conduction in nanofluids, Chaos, Solitons & Fractals. 2009, 39: 2211-2215. |
| Wang L., Fan J. and Wei X., Is heat conduction in two-phase systems Fourier type?, 2009 ASME Summer Heat Transfer Conference. ASME, 2009, HT2009-88173. |
| Wang L., Zhang Y. and Cheng L., Magic microfluidic T-junctions: valving and bubbling, Chaos, Solitons & Fractals. 2009, 39: 1530-1537. |
| Wang L. and Wei X., Modeling two-phase-system heat conduction, Mathematics in Chemical Kinetics and Engineering, An International Workshop . 2009, 4pp. |
| Wang L., Xu M.T. and Wei X., Multiscale theorems, Advances in Chemical Engineering. Elsevier B.V., 2008, 34: 175-468. |
| Wang L., Nanofluids of the future, Keynote lecture, Proceedings of UK-China Particle Technology Forum II. 2009, K-2-1: 39-40. |
| Wang L. and Quintard M., Nanofluids of the future, Advances in Transport Phenomena 2009. Heidelberg, Springer-Verlag, 2009, 179-248. |
| Wang L. and Wei X., Nanofluids: synthesis, heat conduction, and extension, Journal of Heat Transfer. 2009, 131: 033102/1-033102/7. |
| Wang L., Next frontier in nanofluids research and development, Proceedings of 17 th International Conference on Composites or Nano Engineering. Honolulu, USA, 2009, 1085-1086. |
| Wang L., Jaluria Y., Kelleher M., Lloyd J., Minkowycz W.J., Sen M. and Shah R., Professor Kwang-Tzu Yang on his 80th birthday, International Journal of Heat and Mass Transfer. 2009, 52: 13-14. |
| Wang L., Structural thermodynamics, Keynote lecture, Proceedings of the Advanced Workshop on Constructal Human Dynamics, Security and Sustainability. Evora, Portugal, 2008, 1-21. |
| Wei X., Zhu H.T. and Wang L., CePO4 nanofluids: synthesis and thermal conductivity, Journal of Thermophysics and Heat Transfer. 2009, 23: 219-222. |
| Wei X., Zhu H.T., Kong T.T. and Wang L., Synthesis and thermal conductivity of Cu2O nanofluids, International Journal of Heat and Mass Transfer . 2009, 52: 4371-4374. |
| Wu D.X., Zhu H.T., Wang L. and Liu L.M., Critical issues in nanofluids preparation, characterization and thermal conductivity, Current Nanoscience. 2009, 5: 103-112. |
| Xu M.T., Cheng L., Du W.J. and Wang L., Thermal vibration of dual-phase-lagging heat conduction, Journal of Engineering Thermophysics. 2008, 29: 2075-2077. |
| Yang J.H., Di Q.Q., Zhao J. and Wang L., Mechanism on mass transfer in micro-scale during the microwave drying of plant porous materials, 2009 ASME Summer Heat Transfer Conference. ASME, 2009, HT2009-88389. |
| Yeung J.H., Di Q.Q., Zhao J. and Wang L., Effect of biological macro-molecular flow on the hot-air drying of astragalus slices, 2009 ASME Summer Heat Transfer Conference. ASME, 2009, HT2009-88385. |
| Yun H.M., Cheng L. and Wang L., The influence of variable fluid thermal properties on flow and heat transfer in rectangular mini-channels, Journal of Engineering Thermophysics. 2008, 29: 1915-1917. |
| Researcher : Wang M |
| List of Research Outputs |
| Chen Y., Mak A.F.T., Wang M., Li J.S. and Wong M.S., In vitro behaviour of osteoblast-like cells on PLLA films with a biomimetic apatite or apatite/collagen composite coating, Journal of Materials Science: Materials in Medicine. Germany, Springer, 2008, 19: 2261-2268. |
| Duan B. and Wang M., Controlled release of biomolecules from Ca-P/PHBV nanocomposite microspheres, Proceedings of the 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 106-109. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Design and Characteristics of Selective Laser Sintered Ca-P/PHBV Nanocomposite Scaffolds for Bone Tissue Engineering, Proceedings of the 4th International Symposium on Apatites and Correlative Biomaterials. 2008, 75-79. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Design and characteristics of selective laser sintered Ca-P/PHBV nanocomposite scaffolds for bone tissue engineering, Proceedings of the 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 75-79. |
| Duan B., Lin P.Y. and Wang M., Fabrication and characterisation of biomolecule-loaded Ca-P/PHBV nanocomposite scaffolds via selective laser sintering, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 28. |
| Duan B. and Wang M., Immobilization of heparin on gelatin modified three-dimensional osteoconductive Ca-P/PHBV nanocomposite scaffolds, Proceedings of the 8th Pacific Rim Conference on Ceramics and Glass Technology. Vancouver, Canada, 2009, 1pp. |
| Duan B. and Wang M., Incorporation and release of biomolecules from Ca-P/PHBV nanocomposite tissue engineering scaffolds, Proceedings of the 17th International Conference on Processing and Fabrication of Advanced Materials. Delhi, India, 2008, 881-891. |
| Duan B. and Wang M., Surface modification of three-dimensional Ca-P/PHBV nanocomposite scaffolds with gelatin, Proceedings of the 7th International Conference on Materials Processing for Properties and Performance. Singapore, 2008, 3pp. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Synthesis of Ca-P Nanoparticles and Fabrication of Ca-P/PHBV Nanocomposite Microspheres for Bone Tissue Engineering Applications, Applied Surface Science. Elsevier B.V., 2008, 255: 529-533. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Synthesis of Ca-P nanoparticles and fabrication of Ca-P/PHBV microspheres for bone tissue engineering applications, Applied Surface Science. The Netherlands, Elsevier, 2008, 255: 529-533. |
| Kang J., Wang M. and Yuan X.Y., An investigation into dual-source and dual-power electrospinning of nanofibrous membranes for medical applications, Advanced Materials Research. Switzerland, Trans Tech Publications, 2008, 47-50: 1454-1457. |
| Kang J., Wang M. and Yuan X.Y., Fibrous hybrid membranes fabricated through electrospinning of Poly(L-lactic acid) and gelatin, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 16. |
| Kang J., Wang M. and Yuan X.Y., Formation of hybrid fibrous membranes through electrospinning, Proceedings of the 7th International Conference on Materials Processing for Properties and Performance. Singapore, 2008, 3pp. |
| Lee S.H., Zhou W., Wang M., Cheung W.L. and Ip W.Y., Selective laser sintering of Poly(L-Lactide) porous scaffolds for bone tissue engineering, Journal of Biomimetics, Biomaterials and Tissue Engineering. Switzerland, Trans Tech Publications, 2008, 1: 81-89. |
| Liu Y., Wang M., Li Z. and Lu W.W., Biodegradation and In Vitro biological assessment of totally biodegradable TCP/PHBV composite developed for bone tissue repair, Proceedings of the 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 102-105. |
| Liu Y. and Wang M., Totally biodegradable and osteoconductive composite material consisting of polyhydroxybutyrate and tricalcium phosphate for bone tissue repair, Advanced Materials Research. Switzerland, Trans Tech Publications, 2008, 47-50: 1395-1398. |
| Sultana N., Wong L.S. and Wang M., Fabrication and evaluation of polyhydroxybutyrate and Hydroxyapatite/Polyhydroxybutyrate composite scaffolds for tissue engineering applications, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 11. |
| Sultana N. and Wang M., In vitro degradation and protein adsorption characteristics of PHBV/PLLA blends and PHBV/PLLA-based tissue engineering scaffolds, Advanced Materials Research. Switzerland, Trans Tech Publications, 2008, 47-50: 1399-1402. |
| Sultana N. and Wang M., PHBV/PLLA-based composite acaffolds containing nano-sized calcium phosphate particles for bone tissue engineering, Journal of Experimental Nanoscience. Taylor & Francis, 2008, 3(2): 121-132. |
| Sun T., Wang L.P. and Wang M., A comparative study of (Ti-O)/Ti and (Ti-O-N)/Ti composite coatings for NiTi shape memory alloy for medical applications, Proceedings of the 12th Annual Conference on Ceramics, Cells and Tissues. Faenza, Italy, 2009, 1pp. |
| Sun T. and Wang M., Apatite/TiO2 composite coatings formed on Ti, Ti-6Al-4V and NiTi shape memory alloy, Proceedings of the 7th International Conference on Materials Processing for Properties and Performance. Singapore, 2008, 3pp. |
| Sun T. and Wang M., Characteristics and chemical stability of bioactive titania gel formed on Ti, Ti-6Al-4V and NiTi SMA through a low temperature oxidation process, Advanced Materials Research. Switzerland, Trans Tech Publications, 2008, 47-50: 1403-1406. |
| Sun T. and Wang M., Low-temperature biomimetic formation of apatite/TiO2 composite coatings on Ti and NiTi shape memory alloy and their characterization, Applied Surface Science. The Netherlands, Elsevier, 2008, 255: 396-400. |
| Sun T. and Wang M., Mechanical performance of apatite/TiO2 composite coatings formed on Ti and NiTi shape memory alloy, Applied Surface Science. The Netherlands, Elsevier, 2008, 255: 404-408. |
| Sun T., Cheung H.M. and Wang M., Surface modification of NiTi shape memory alloy by forming a bioactive titania layer through a low temperature process, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 14. |
| Tong H.W., Wang M. and Lu W.W., Cell Interactions with surface-smooth and surface-porous fibers in electrospun fibrous tissue engineering scaffolds, Proceedings of the 12th Annual Conference on Ceramics, Cells and Tissues. Faenza, Italy, 2009, 1pp. |
| Tong H.W., Lam F.S. and Wang M., Electrospinning of porous Poly(hydroxybutrate-co-hydroxyvalerate) fibers, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 27. |
| Tong H.W., Wang M., Li Z. and Lu W.W., Micro- and nano-fibers of Poly(hydroxybutrate-co-hydroxyvalerate) formed through electrospinning and their biocompatibility assessment, Proceedings of the Biomedical Engineering Conference BME2008. Hong Kong, 23. |
| Wang M., Bioactive apatites and calcium phosphates and their use in bone tissue engineering scaffolds, 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 57-60. |
| Wang M., Bioactive apatites and calcium phosphates and their use in bone tissue engineering scaffolds, Proceedings of the 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 57-60. |
| Wang M., Bioactive calcium phosphates and nanocomposite scaffolds for bone tissue engineering, 8th Pacific Rim Conference on Ceramics and Glass Technology. Vancouver, Canada, 2009, 1pp. |
| Wang M., Bioactive calcium phosphates and nanocomposite scaffolds for bone tissue engineering, Proceedings of the 8th Pacific Rim Conference on Ceramics and Glass Technology. Vancouver, Canada, 2009, 1pp. |
| Wang M., Liu Y., Au C.L., Lai P.K., Leung L.Y. and Chua B.H., Deformation and fracture of bone analogue biomaterials having different polymer matrices, Advanced Materials Research. Switzerland, Trans Tech Publications, 2008, 47-50: 1391-1394. |
| Wang M., Design and fabrication of nanocomposite scaffolds for bone tissue engineering, 17th International Conference on Processing and Fabrication of Advanced Materials. Delhi, India, 2008, 1pp. |
| Wang M., Design and fabrication of nanocomposite scaffolds for bone tissue engineering, Proceedings of the 17th International Conference on Processing and Fabrication of Advanced Materials. Delhi, India, 2008, 1pp. |
| Wang M., Developing Biomedical Composites: what have we achieved and where are we headed?, International Conference on Multi-functional Materials and Structures. Hong Kong, 2008, 1pp. |
| Wang M., Developing Biomedical Composites: what have we achieved and where are we headed?, Proceedings of International Conference on Multi-functional Materials and Structures. Hong Kong, 2008, 1pp. |
| Wang M., Developing tissue engineering scaffolds: Materials selection, fabrication technologies, and other issues, Proceedings of World Conference of Regenerative Medicine & Stem Cell 2008 (RMSC-2008). Foshan, Guangdong, China, 2008, 1pp. |
| Wang M., Lessons from nature and the biomimetic approach in developing new biomaterials, International Workshop on Mechanics and Biomimetics of Biomaterials & Animal Locomotion (IWMBAL-2008. Sanya, China, 2008, 1pp. |
| Wang M., Lessons from nature and the biomimetic approach in developing new biomaterials, Proceedings of International Workshop on Mechanics and Biomimetics of Biomaterials & Animal Locomotion (IWMBAL-2008). Sanya, China, 2008, 1pp. |
| Wang M., Member of Technical Committee, TC150 Implants for surgery International Organization for Standardization (ISO). International, 2008. |
| Wang M., Member of Technical Committee, TC194 Biological Evaluation of Medical Devices International Organization for Standardization (ISO). International, 2008. |
| Wang M., Member of Technical Committee, TC229 Nanotechnologies International Organization for Standardization (ISO). International, 2008. |
| Wang M., Member of the Editorial Board: the Editorial Board, Associate Editor , Journal of Bionanoscience. USA, American Scientific Publishers, 2008. |
| Wang M., Member of the Editorial Board, Biomedical Materials: Materials for Tissue Engineering & Regenerative Medicine. UK, Institute of Physics, 2008. |
| Wang M., Member of the Editorial Board, Composites Science and Technology. The Netherlands, Elsevier, 2008. |
| Wang M., Member of the Editorial Board, Frontiers of Materials Science in China (in English). China and Germany, Higher Education Press Springer, 2008. |
| Wang M., Member of the Editorial Board, IET Nanobiotechnology. UK, Institution of Engineering and Technology, 2008. |
| Wang M., Member of the Editorial Board, Journal of Biomimetics, Biomaterials and Tissue Engineering. Switzerland, TransTech Publications, 2008. |
| Wang M., Member of the Editorial Board, Journal of Materials Science: Materials in Medicine. Germany, Springer, 2008. |
| Wang M., Member of the Editorial Board, Surface adn Coatings Technology. The Netherlands, Elesevier, 2008. |
| Wang M., Nano-biomaterials for bone tissue repair, 6th Korea-China Symposium on Biomaterial & Nano-Biotechnology. Busan, Korea, 2008, 16. |
| Wang M., Nano-biomaterials for bone tissue repair, Proceedings of the 6th Korea-China Symposium on Biomaterial & Nano-Biotechnology. Busan, Korea, 2008, 16. |
| Wang M., Nanomaterials and composite scaffolds for tissue engineering, 7th International Conference on Materials Processing for Properties and Performance. Singapore, 2008, 1pp. |
| Wang M., Nanomaterials and composite scaffolds for tissue engineering, Proceedings of the 7th International Conference on Materials Processing for Properties and Performance. Singapore, 2008, 1pp. |
| Wang M., Nanostructured biomaterials and biomimicking in biomaterials development for human body tissue repair, 26th Chinese Chemical Society Congress. Tianjin, China, 2008, 1pp. |
| Wang M., Nanostructured biomaterials and biomimicking in biomaterials development for human body tissue repair, Proceedings of the 26th Chinese Chemical Society Congress. Tianjin, China, 2008, 1pp. |
| Wang M., Surface modification technologies and coatings for metal implants, 12th Annual Conference on Ceramics, Cells and Tissues. Faenza, Italy, 2009, 1pp. |
| Wang M., Surface modification technologies and coatings for metal implants, Proceedings of the 12th Annual Conference on Ceramics, Cells and Tissues. Faenza, Italy, 2009, 1pp. |
| Wang M., The composite and hybridization approach in tissue engineering scaffold development, 2nd Asian Biomaterials Congress. Singapore, 2009, 1pp. |
| Wang M., The composite and hybridization approach in tissue engineering scaffold development, Proceedings of the 2nd Asian Biomaterials Congress. Singapore, 2009, 1pp. |
| Wang M., Tissue engineering scaffolds: materials selection, fabrication technologies, and other issues, World Conference of Regenerative Medicine & Stem Cell 2008 (RMSC-2008). Foshan, Guangdong, China, 2008, 1pp. |
| Zhou W., Duan B., Wang M. and Cheung W.L., Crystallization kinetics of poly(L-lactide)/carbonated hydroxyapatite nanocomposite microspheres, Journal of Applied Polymer Science. 2009, 113: 4100 - 4115. |
| Researcher : Wang Q |
| List of Research Outputs |
| Wang Q. and Lam J., Delay-dependent L2-L-infinity model reduction for polytopic systems with time-varying delay, IEEE International Conference on Automation and Logistics. Qingdao, China, 2008, 50-55. |
| Researcher : Wei X |
| List of Research Outputs |
| Wang L., Xu M.T. and Wei X., Dual-phase-lagging and porous-medium heat conduction processes, Emerging Topics in Heat and Mass Transfer in Porous Media - from Bioengineering and Microelectronics to Nanotechnology, In: P. Vadasz, Theory and Applications of Transport in Porous Media. Berlin, Germany, Springer-Verlang, 2008, 22: 1-37. |
| Wang L., Xu M.T. and Wei X., Dual-phase-lagging and porous-medium heat conduction processes, In: P. Vadasz, Emerging Topics in Heat and Mass Transfer in Porous Media - from Bioengineering and Microelectronics to Nanotechnology, Theory and Applications of Transport in Porous Media. Berlin, Springer-Verlag, 2008, 22: 1-38. |
| Wang L. and Wei X., Erratum: Nanofluids: Synthesis, Heat Conduction, and Extension, Journal of Heat Transfer. 2009, 131(3): 033102. |
| Wang L., Zhou X.S. and Wei X., Heat Conduction: Mathematical Models and Analytical Solutions. Heidelberg, Springer-Verlag, 2008, 1-515. |
| Wang L. and Wei X., Heat conduction in nanofluids, Chaos, Solitons & Fractals. 2009, 39: 2211-2215. |
| Wang L., Fan J. and Wei X., Is heat conduction in two-phase systems Fourier type?, 2009 ASME Summer Heat Transfer Conference. ASME, 2009, HT2009-88173. |
| Wang L. and Wei X., Modeling two-phase-system heat conduction, Mathematics in Chemical Kinetics and Engineering, An International Workshop . 2009, 4pp. |
| Wang L., Xu M.T. and Wei X., Multiscale theorems, Advances in Chemical Engineering. Elsevier B.V., 2008, 34: 175-468. |
| Wang L. and Wei X., Nanofluids: synthesis, heat conduction, and extension, Journal of Heat Transfer. 2009, 131: 033102/1-033102/7. |
| Wei X., Zhu H.T. and Wang L., CePO4 nanofluids: synthesis and thermal conductivity, Journal of Thermophysics and Heat Transfer. 2009, 23: 219-222. |
| Wei X., Zhu H.T., Kong T.T. and Wang L., Synthesis and thermal conductivity of Cu2O nanofluids, International Journal of Heat and Mass Transfer . 2009, 52: 4371-4374. |
| Researcher : Wo PC |
| List of Research Outputs |
| Wo P.C., Jones I.P. and Ngan A.H.W., TEM study of the deformation structures around nano-scratches, Philosophical Magazine. Taylor & Francis, 2008, 88(9): 1369-1388. |
| Researcher : Wong HL |
| List of Research Outputs |
| Chan B.P., Chan G.C.F., Wong H.L., Cheung P.T., Cheah K.S.E. and Chan D., Cell-matrix Microspheres, Methods For Preparatin And Applications 07872058.8 - 1223 Pct/ib2007004413, European Patent Office. 2008. |
| Wong H.L., Chan G.C.F., Yang Z. and Chan B.P., Functionally selecting hMSCs subpopulations with better migratory activities using a collagen barrier, Biomaterials Asia 2009. Hong Kong, PA14. |
| Wong H.L., Migration and other Characteristics of Collagen Microencapsulated hMSCs - A Comparison with hMSCs in Traditional 2D Culture, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-83. |
| Researcher : Wong HL |
| List of Research Outputs |
| Chan B.P., Chan G.C.F., Wong H.L., Cheung P.T., Cheah K.S.E. and Chan D., Cell-matrix Microspheres, Methods For Preparatin And Applications 07872058.8 - 1223 Pct/ib2007004413, European Patent Office. 2008. |
| Wong H.L., Chan G.C.F., Yang Z. and Chan B.P., Functionally selecting hMSCs subpopulations with better migratory activities using a collagen barrier, Biomaterials Asia 2009. Hong Kong, PA14. |
| Wong H.L., Migration and other Characteristics of Collagen Microencapsulated hMSCs - A Comparison with hMSCs in Traditional 2D Culture, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-83. |
| Researcher : Wong MY |
| List of Research Outputs |
| Li Y.Y., Cheng H.W., Chan P.M., Wong M.Y., Chan D. and Chan B.P., Collagen-mesenchymal stem cell microspheres for cartilage tissue engineering, Biomaterials Asia 2009. Hong Kong, OD02. |
| Wong M.Y., Hui T.Y., Yip H.K., Chan G.C.F. and Chan B.P., Self-assembled osteoinductive bone-like microparticles, Biomaterials Asia 2009. Hong Kong, PB16. |
| Researcher : Xie X |
| List of Research Outputs |
| Chao C.Y.H., Wan M.P., Morawska L., Johnson G.R., Ristovski Z.D., Hargreaves M., Mengersen K., Corbett S., Li Y., Xie X. and Katoshevski D., Characterization of expiration air jets and droplet size distributions immediately at the mouth opening, Aerosol Science. Elsevier Ltd., 2009, 40: 122-133. |
| Xie X., Evaporation and Movement of Respiratory Droplets in Indoor Environments, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-196. |
| Researcher : Xiong J |
| List of Research Outputs |
| Shu Z., Lam J. and Xiong J., Mixed H2/H-infinity control of discrete-time markovian jump systems via static output feedback controllers, IFAC World Congress 2008. Seoul, Korea, 5909-5914. |
| Shu Z., Lam J. and Xiong J., Non-fragile exponential stability assignment of discrete-time linear systems with missing data in actuators, IEEE Transactions on Automatic Control. 2009, 54(3): 625-630. |
| Xiong J. and Lam J., Robust H2 control of markovian jump systems with uncertain switching probabilities, International Journal of Systems Science. 2009, 40(3): 255-265. |
| Xiong J. and Lam J., Stabilization of networked control systems with A Logic ZOH, IEEE Transactions on Automatic Control. 2009, 54(2): 358-363. |
| Researcher : Xuan J |
| List of Research Outputs |
| Xuan J., Leung M.K.H., Leung Y.C. and Ni M., Assessment of coating-by-parts method to determine the CO distribution in a water gas shift reactor by CFD modeling, The First International Conference on Applied Energy, 5-7 January 2009, Hong Kong. 2009. |
| Researcher : Xue S |
| List of Research Outputs |
| Xue S., Kou X. and Tan S.T., Natural Voice-Enabled CAD: Modeling via Natural Discourse, Computer-Aided Design and Applications. 2009. |
| Researcher : Yan K |
| List of Research Outputs |
| Yan K. and Soh A.K., Effects of grain boundary cavities on the thermal resistance under ultrashort laser pulse, JOURNAL OF PHYSICS D - APPLIED PHYSICS . UK, IOP PUBLISHING, 2008, 41(15): Art. No. 155401. |
| Yan K. and Soh A.K., Simulation of surface effects on the intrinsic dissipation of nanooscillators, Philosophical Magazine Letters. England, TAYLOR & FRANCIS LTD, 2009, 89: 51-58. |
| Yan K., Size Effects on the Thermo-mechanical Behavior of Nano-structures / Materials, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-133. |
| Researcher : Yang J |
| List of Research Outputs |
| Yang J., On the Development of Water Waves Generated by a Submerged Moving Body in a Two-layer Fluid, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-137. |
| Researcher : Yang L |
| List of Research Outputs |
| Yang L. and Li Y., City ventilation of Hong Kong at no-wind conditions, Atmospheric Environment. Elsevier Ltd., 2009, 43: 3111-3121. |
| Yang L. and Li Y., Cooling load reduction by using thermal mass and night ventilation, Energy and Buildings. Elsevier B.V., 2008, 40: 2052-2058. |
| Researcher : Yang Z |
| List of Research Outputs |
| Yang Z., Fault Detection, Estimation and Control of Periodically Excited Nonlinear Systems, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2008, 1-167. |
| Researcher : Yeung CW |
| List of Research Outputs |
| Yeung C.W., Three Dimensional Culture and In Vitro Chondrogenic Differentiation of Mouse Embryonic Stem Cell in Collagen Microsphere, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2009, 1-215. |
| Yeung C.W., Cheah K.S.E., Chan D. and Chan B.P., Three dimensional culture and chondrogenic differentiation of mouse embryonic stem cells, Biomaterials Asia 2009. Hong Kong, OB01. |
| Yeung C.W., Chan D., Cheah K.S.E. and Chan B.P., Three dimensional culture and embryoid body-free chondrogenic differentiation of mouse embryonic stem cells in collagen microspheres, Tissue Engineering, Part A. 2009, 15: 1-15. |
| Researcher : Yip LP |
| List of Research Outputs |
| Rogers C., Yip L.P. and Chow K.W., A resonant Davey-Stewartson capillarity model system: solitonic generation, International Journal of Nonlinear Sciences and Numerical Simulation. 2009, 10: 397-405. |
| Researcher : Zhang D |
| List of Research Outputs |
| Grimshaw R.H.J., Zhang D. and Chow K.W., Transcritical flows over a hole, Studies in Applied Mathematics. Massachusetts Institute of Technology, 2009, 122: 235-248. |
| Researcher : Zhang Y |
| List of Research Outputs |
| Wang L., Zhang Y. and Cheng L., Magic microfluidic T-junctions: valving and bubbling, Chaos, Solitons & Fractals. 2009, 39: 1530-1537. |
| Researcher : Zhao X |
| List of Research Outputs |
| Liu J.X., Zhao X., Soh A.K. and Wang B.L., Thickness-edge modes in a semi-infinite magneto-electro-elastic plate, Philosophical Magazine Letters. England, TAYLOR & FRANCIS LTD, 2009, 89: 155-161. |
| Soh A.K., Song Y. and Zhao X., Crack Tip Domain Switching in Normal and Relaxor Ferroelectrics Subjected to Mechanical and Electric Loading, International Conference on Materials for Advanced Technologies 2009. 2009. |
| Zhao X. and Soh A.K., Influence of dipole defects on polarization switching in the vicinity of a crack in relaxor ferroelectrics, In: Soh, AK; Ng, CO , The 13th Annual Conference of HKSTAM, the 5th Jiangsu-Hong Kong Forum on Mechanics and its application and Symposium on the Development of Mechanics in Macau. Hong Kong, HKSTAM, 2009, 1: 27. |
| Researcher : Zhou W |
| List of Research Outputs |
| Duan B., Wang M., Zhou W. and Cheung W.L., Design and characteristics of selective laser sintered Ca-P/PHBV nanocomposite scaffolds for bone tissue engineering, Proceedings of the 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 75-79. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Synthesis of Ca-P Nanoparticles and Fabrication of Ca-P/PHBV Nanocomposite Microspheres for Bone Tissue Engineering Applications, Applied Surface Science. Elsevier B.V., 2008, 255: 529-533. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Synthesis of Ca-P nanoparticles and fabrication of Ca-P/PHBV microspheres for bone tissue engineering applications, Applied Surface Science. The Netherlands, Elsevier, 2008, 255: 529-533. |
| Lee S.H., Zhou W., Wang M., Cheung W.L. and Ip W.Y., Selective laser sintering of Poly(L-Lactide) porous scaffolds for bone tissue engineering, Journal of Biomimetics, Biomaterials and Tissue Engineering. Switzerland, Trans Tech Publications, 2008, 1: 81-89. |
| Researcher : Zhou W |
| List of Research Outputs |
| Duan B., Wang M., Zhou W. and Cheung W.L., Design and characteristics of selective laser sintered Ca-P/PHBV nanocomposite scaffolds for bone tissue engineering, Proceedings of the 4th International Symposium on Apatite and Correlative Biomaterials (ISACB 2008). Manila, the Philippines, 2008, 75-79. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Synthesis of Ca-P Nanoparticles and Fabrication of Ca-P/PHBV Nanocomposite Microspheres for Bone Tissue Engineering Applications, Applied Surface Science. Elsevier B.V., 2008, 255: 529-533. |
| Duan B., Wang M., Zhou W. and Cheung W.L., Synthesis of Ca-P nanoparticles and fabrication of Ca-P/PHBV microspheres for bone tissue engineering applications, Applied Surface Science. The Netherlands, Elsevier, 2008, 255: 529-533. |
| Lee S.H., Zhou W., Wang M., Cheung W.L. and Ip W.Y., Selective laser sintering of Poly(L-Lactide) porous scaffolds for bone tissue engineering, Journal of Biomimetics, Biomaterials and Tissue Engineering. Switzerland, Trans Tech Publications, 2008, 1: 81-89. |
| Researcher : Zhuang H |
| List of Research Outputs |
| Zhuang H., Zheng G.P. and Soh A.K., Interactions between transition metals and defective carbon nanotubes, Computational Materials Science. NETHERLANDS, ELSEVIER SCIENCE BV, 2008, 43: 823-828. |
| Researcher : Zhuang Z |
| List of Research Outputs |
| Zhuang Z., Li Y., Chen B. and Guo J., Chinese kang as a domestic heating system in rural northern China - A review, Energy and Buildings. Elsevier Ltd., 2009, 41: 111-119. |
| Zhuang Z., Li Y. and Chen B., Thermal storage performance analysis on Chinese kangs, Energy and Buildings. Elsevier Ltd., 2009, 41: 452-459. |