DEPT OF MECHANICAL ENGG
Researcher : An X |
List of Research Outputs |
An X., Leung V., Cheung K.M.C. and Chan B.P., A comparison between disc degeneration models induced by annulus puncture and nucleus aspiration in Rabbits. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada. . 2010, 1042. |
Researcher : Au-yeung KL |
List of Research Outputs |
Chan B.P., Au-yeung K.L., Kwok C.B., Ho F.C. and Li C.W., Compression-induced alignment of human mesenchymal stem cells in 3D collagen constructs., Global Spine Congress 2011, March 24-26, 2011, Barcelona, Spain. . 2011, 1724. |
Researcher : Bai L |
List of Research Outputs |
Bai L., In Silico Simulation of Actin-based Motility, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2010, 1-88. |
Bai L. and Lin Y., Transient state model of actin-based motility, Theoretical and Applied Mechanics Letters . 2011, 1: 014002. |
Lin Y., Shenoy V...B., Hu B. and Bai L., A Microscopic Formulation for the Actin-Driven Motion of Listeria in Curved Paths, Biophysical Journal. 2010, 99: 1043-1052. |
Researcher : Chan ATY |
Project Title: | Strategic guidelines for future development to achieve sustainable air quality in urban areas |
Investigator(s): | Chan ATY |
Department: | Mechanical Engg |
Source(s) of Funding: | Other Funding Scheme |
Start Date: | 09/1999 |
Project Title: | Evaluation of air pollution indication system in Hong Kong |
Investigator(s): | Chan ATY |
Department: | Mechanical Engg |
Source(s) of Funding: | Pollution Studies in Hong Kong |
Start Date: | 01/2000 |
Project Title: | 16th Engineering Mechanics Conference (ASCE) Drag Effect on Mountain Waves by Flow Over Topography |
Investigator(s): | Chan ATY |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 07/2003 |
Project Title: | Indoor/outdoor air quality relationships of respirable suspended particulates, nitrogen oxides and carbon monoxides in urban buildings |
Investigator(s): | Chan ATY, Li Y |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 09/2003 |
Project Title: | Correlation between urban morphological attributes and air pollution in urban areas in Hong Kong |
Investigator(s): | Chan ATY |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 09/2004 |
Project Title: | 15th United States National Congress on Theoretical and Applied Mechanics Indoor/outdoor Air Quality Relationship in an Urban Street Canyon |
Investigator(s): | Chan ATY |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 06/2006 |
Researcher : Chan BP |
Project Title: | Photochemical crosslinking (PC) technology in fabrication of collagen-based scaffolds for tissue engineering |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 02/2004 |
Project Title: | International Society for Stem Cell Research 4th ISSCR Annual Meeting A Novel 3-Dimensional Culture System for Human Mesenchymal Stem Cells |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 06/2006 |
Project Title: | Collagen biomaterial and bone marrow derived mesenchymal stem cell (MSCs) based therapy - Second generation tissue engineering solutions for cartilage repair |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme |
Start Date: | 07/2008 |
Project Title: | Collagen biomaterial and bone marrow derived mesenchymal stem cell (MSCs) based therapy - Second generation tissue engineering solutions for cartilage repair |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme |
Start Date: | 08/2008 |
Project Title: | A Novel Cell Delivery Technology Injectable Collagen-Cell Microspheres For Intervertebral Disc Regeneration |
Investigator(s): | Chan BP, Chan D, Chan GCF, Cheung KMC, Leung YL, Sze KY |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2009 |
Project Title: | Creating Stable Tissue Interfaces for Bioengineered Intervertebral Disc Segment |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme |
Start Date: | 02/2009 |
Project Title: | Creating Stable Tissue Interfaces for Bioengineered Intervertebral Disc Segment |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme |
Start Date: | 05/2009 |
Project Title: | Fabrication of osteoinductive microparticles for bone tissue engineering |
Investigator(s): | Chan BP, Luk KDK, Cheung KMC |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2009 |
Completion Date: | 11/2010 |
Project Title: | Research Output Prize |
Investigator(s): | Chan BP, Li CH, Sze KY, Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | Research Output Prize (in Faculty) |
Start Date: | 12/2009 |
Project Title: | Selection of human mesenchymal stem cells (hMSCs) sub-populations with better migratory activities using a collagen barrier - A strategy to enhance stem cell engraftment? |
Investigator(s): | Chan BP, Chan GCF, Yang Z |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2010 |
Project Title: | Decellularization of intervertebral disc cell-encapsulated collagen microspheres – A 3D model to study the effects of acellular matrix on stem cell fate |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2010 |
Project Title: | Development of a selection kit for mesenchymal stem cells with better migratory properties from various tissue sources |
Investigator(s): | Chan BP, Chan GCF, Yu CS |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Applied Research |
Start Date: | 06/2010 |
Completion Date: | 06/2011 |
Project Title: | Bioengineering a Prototype Intervertebral Disc Motion Segment |
Investigator(s): | Chan BP, Luk KDK, Cheung KMC |
Department: | Mechanical Engg |
Source(s) of Funding: | Innovation and Technology Support Programme (Tier 2) |
Start Date: | 12/2010 |
Project Title: | Outstanding Young Researcher Award 2009-10 |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Outstanding Young Researcher Award |
Start Date: | 12/2010 |
Project Title: | Platform technologies in engineering biomaterial structures with controlled heterogeneity for investigation of stem cell-matrix interactions |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Travel Grants for NSFC/RGC JRS |
Start Date: | 12/2010 |
Project Title: | Bioengineering a Prototype Intervertebral Disc Motion Segment |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme |
Start Date: | 12/2010 |
Project Title: | Bioengineering a Prototype Intervertebral Disc Motion Segment |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme |
Start Date: | 12/2010 |
Project Title: | Cellular and molecular mechanism of compression-induced reorientation of human mesenchymal stem cells in 3D collagen constructs |
Investigator(s): | Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2011 |
List of Research Outputs |
An X., Leung V., Cheung K.M.C. and Chan B.P., A comparison between disc degeneration models induced by annulus puncture and nucleus aspiration in Rabbits. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada. . 2010, 1042. |
Chan B.P., Bioactive biomaterials, AO World Forum for Spine Research, Montreal. 2010. |
Chan B.P., Collagen microencapsulation and its applications in tissue engineering, Biomedical Engineering, Duke University, USA. 2010. |
Chan B.P., Collagen microencapsulation and its applications in tissue engineering, Biomedical Engineering, Peking University. 2010. |
Chan B.P., Collagen microencapsulation and its applications, Biomedical Engineering, Tsing Hua University. 2010. |
Chan B.P., Collagen microsphere based protein delivery , Biomedical Engineering, Peking University. 2010. |
Chan B.P., Collagen microsphere-based protein delivery , Forum on Strategic Research Themes in Biomedicine. 2011. |
Chan B.P., Chan C.M. and So K.F., Collagen-Based Microspheres and Methods for Preparation and Use., Us Patent No. 7,931,918 (issued on 26 April 2011). 2011. |
Chan B.P., Chan M.C. and So K.F., Collagen-based microspheres and methods of preparation and uses thereof. 2011, United States Patent No. US 7,931,918 B2. |
Chan B.P., Au-yeung K.L., Kwok C.B., Ho F.C. and Li C.W., Compression-induced alignment of human mesenchymal stem cells in 3D collagen constructs., Global Spine Congress 2011, March 24-26, 2011, Barcelona, Spain. . 2011, 1724. |
Chan B.P., Ho F.C. and Li C.W., Compression-induced alignment of human mesenchymal stem cells in collagen constructs. , International Socity of Stem Cell Research (ISSCR) 9th Annual Meeting, June 15 - 18, 2011, Toronto, Ontario Canada. 2011, 97. |
Chan B.P., Effects of compression loading on mesenchymal stem cell alignment, Biomedical Engineering, Peking University. 2010. |
Chan B.P., Mechanoregulation of mesenchymal stem cell in 3D collagen constructs, Stem Cell Engineering Symposium. 2010. |
Chan B.P., Mechanoregulation of mesenchymal stem cell, Forum on Strategic Research Themes in Bionanotechnology. 2011. |
Chan B.P., Mesenchymal stem cell collagen microspheres for cartilage tissue engineering , Mini-Cartilage Symposium. 2010. |
Chan B.P., Mesenchymal stem cell collagen microspheres for cartilage tissue engineering, Biomedical Engineering, Peking University. 2010. |
Chan B.P., Cheng H.W., Chik T.K., Cheung K.M.C. and Luk K.D.K., Methods for Complex Tissue Engineering. , US Regular Patent Application (filed on 14 June 2011) (Application No. 13/159,837). 2011. |
Chan B.P., Cheng H.W., Chik T.K., Cheung K.M.C. and Luk K.D.K., Methods for Complex Tissue Engineering, PCT Patent Application (filed on 15 June 2011) (Application No. pct/cn2011/000988). 2011. |
Chan B.P., Wong H.L., Wong M.Y., Chan G.C.F. and Yang Z., Methods to Enhance Mesenchymal Stem Cell Migration. , US Regular Patent Application (filed on 14 June 2011) (Application No. 13/159,835). 2011. |
Chan B.P., Outstanding Young Researcher Award (Faculty of Engineering), University Research Committee, HKU. 2010. |
Chan B.P., Platform Technologies for Complex Tissue Engineering, Stem Cell and Regenerative Medicine Consortium (SCRMC) Technology Forum 2010. 2010. |
Cheng H.W., Chan D., Cheung K.M.C. and Chan B.P., Generation of an osteochondral interface using rabbit mesenchymal stem cells (rMSCs) and collagen gel. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada.. 2010, 1068. |
Cheng H.W., Luk K.D.K., Cheung K.M.C. and Chan B.P., In vitro generation of osteochondral interface from mesenchymal stem cell-collagen microspheres. , Biomaterials. 2011, 32: 1526-1535. |
Chik T.K., Luk K.D.K., Cheung K.M.C. and Chan B.P., Creation of a tissue interface between bone-like construct and soft tissue-like construct. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada.. 2010, 1099. |
Choy T.H.A., Leong K. and Chan B.P., Controlling Glycosaminoglycan (gag) Incorporation And Retention In Collagen-Gag Co-Precipitates By Chemical Modification Of Collagen. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada.. 2010, 1069. |
Choy T.H.A., Leong K. and Chan B.P., The Effect of Chemical Modification of Collagen on Collagen-Glycosaminoglycan Co-Precipitate for Nucleus Pulposus Replacement. , 2010 IEEE International Conference on Nano/Molecular Medicine and Engineering. Dec 5-9, 2010. Hong Kong, China.. 2010, 67. |
Ho F.C. and Chan B.P., Effect of Dynamic Mechanical Compression on Actin Cytoskeleton Network of Human Mesenchymal Stem Cells (hMSCs) in Three Dimensional Collagen Environments. , 2010 IEEE International Conference on Nano/Molecular Medicine and Engineering. Dec 5-9, 2010. Hong Kong, China. 2010, 65. |
Ho F.C. and Chan B.P., Effect of dynamic compression on actin cytoskeleton network of human mesenchymal stem cells in three dimensional collagen constructs, Gordon Conference on Musculoskeletal Biology and Bioengineering. 1-6 Aug 2010, Andover, New Hamshire, MA.. 2010, 26. |
Li C.H., Chik T.K., Ngan A.H.W., Chan C.H., Shum D.K.Y. and Chan B.P., Correlation between compositional and mechanical properties of human mesenchymal stem cell-collagen microspheres during chondrogenic differentiation., Tissue Engineering Part A . 2011, 17(5-6): 777-788. |
Li C.W. and Chan B.P., 3D Matrix Adhesions Mediating Mechanostranduction in hMSC-Collagen Constructs. , 2010 IEEE International Conference on Nano/Molecular Medicine and Engineering. Dec 5-9, 2010. Hong Kong, China. 2010, 15. |
Li C.W. and Chan B.P., 3D matrix adhesions mediating mechanotransduction in hMSC collagen constructs., Gordon Conference on Musculoskeletal Biology and Bioengineering. 1-6 Aug 2010, Andover, New Hamshire, MA.. 2010, 28. |
Lo A.C.Y., Wong C.H., Nian S., Cheung P.T., Chan B.P. and Wong D.S.H., A cell-based drug delivery system using collagen-alginate composite matrix: in vitro and in vivo studies, 2011 Congress of the Asia-Pacific Academy of Ophthalmology. 2011. |
Poon C.H., Wong M.Y., Chan B.P. and Yu A.C.H., Low-intensity pulsed ultrasound enhances differentiation of osteolineage-committed human mesenchymal stem cells, International Symposium on Therapeutic Ultrasound. 2011. |
Shen Y., Ng V.C.W., Cheung S.K.C., Shen W., Lam Y.W., Agata K., Chan B.P. and Chan D., The Study of Extracellular Matrix and Stem Cell Niche in Planarian, 15 th Research Postgraduate Symposium, HKU, 1 & 2 Dec 2010. HK. |
Wong M.Y., Wong H.L., Diao H., Chan G.C.F., Yang Z. and Chan B.P., Regulation of migration characteristics of human mesenchynal stem cells (hMSCs) by encapsulation in collagen matrix. , International Society of Stem Cell Research (ISSCR) 9th Annual Meeting, June 15 - 18, 2011, Toronto, Ontario Canada. . 2011, 147. |
Xu J. and Chan B.P., Microstructure of Bovine Serum Albumin (BSA) matrix fabricated by two-photon photochemical crosslinking., 2010 International Conference on Biofabrication. Philadelphia, Pennsylvania, USA. Oct 4-6, 2010.. 2010, 134. |
Xu J., Cheng J.P., Cheng S.H. and Chan B.P., Submicron-fabrication of Bovine serum albumin (BSA) matrix via two-photon photochemical Crosslinking. , 2010 IEEE International Conference on Nano/Molecular Medicine and Engineering. Dec 5-9, 2010. Hong Kong, China. . 2010, 71. |
Yeung C.W., Junger S., Grad S., Lezuo P., Alini M. and Chan B.P., Effect of compression loading on human mesenchymal stem cells-collagen microspheres in an ovine intervertebral disc organ culture – a preliminary study. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada.. 2010, 1091. |
Yuan M., Yeung C.W., Diao H. and Chan B.P., Differentiation Of Mesenchymal Stem Cells Into Nucleus Pulposus Cells With The Use Of Microencapsulation In Vitro. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada. . 2010, 1092. |
Researcher : Chan CM |
List of Research Outputs |
Chan B.P., Chan C.M. and So K.F., Collagen-Based Microspheres and Methods for Preparation and Use., Us Patent No. 7,931,918 (issued on 26 April 2011). 2011. |
Researcher : Chan CW |
Project Title: | IFAC Symposium on Artificial Intelligence in Real Time Control AIRTC-2000 Adaptive Control of Stochastic Nonlinear Systems Using Neurofuzzy Networks Modelling of Nonlinear Dynamic Systems Using Support Vector Neural Networks |
Investigator(s): | Chan CW |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 10/2000 |
Project Title: | International Federation of Automatic Control 15th IFAC World Congress Asymptotic Local Approach in Fault Detection with Faults Modeled by Neurofuzzy Networks |
Investigator(s): | Chan CW |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 07/2002 |
Project Title: | Installation of wave suppressor in the Victoria Harbour |
Investigator(s): | Chan CW |
Department: | Mechanical Engg |
Source(s) of Funding: | Utility Information Ltd. |
Start Date: | 06/2006 |
Project Title: | Neurofuzzy network based adaptive control for nonlinear networked control systems |
Investigator(s): | Chan CW |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2008 |
Project Title: | Wireless networked control of unmaaned mini-helicopters based on neurofuzzy networks |
Investigator(s): | Chan CW |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 12/2008 |
Researcher : Chan KW |
Project Title: | Computer-aided mould design and manufacture of thermoformed PVC sheets |
Investigator(s): | Chan KW |
Department: | Mechanical Engg |
Source(s) of Funding: | Other Funding Scheme |
Start Date: | 01/2002 |
Project Title: | Design and development of implantable artifical finger joints for biological repair |
Investigator(s): | Chan KW, Chow SP, Lu WW, Chiu PKY, Ngan AHW, Luk KDK |
Department: | Mechanical Engg |
Source(s) of Funding: | Guangdong-Hong Kong Technology Cooperation Funding Scheme |
Start Date: | 06/2007 |
Project Title: | Design and development of implantable artifical finger joints for biological repair |
Investigator(s): | Chan KW |
Department: | Mechanical Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme |
Start Date: | 10/2009 |
Project Title: | Design and development of implantable artifical finger joints for biological repair |
Investigator(s): | Chan KW |
Department: | Mechanical Engg |
Source(s) of Funding: | Innovation and Technology Fund Internship Programme |
Start Date: | 10/2009 |
List of Research Outputs |
Zheng T., Chan K.W. and Hu Y., A rehabilitation system of elbow joint neuromuscular recovery, In: N.J. Sarhan, M.H. Hamza, Proceedings of the 6th IASTED International Conference on Human-Computer Interaction. Canada, The International Association of Sci. and Tech. for Deveop., 2011, 7-14. |
Researcher : Chan YL |
List of Research Outputs |
Chan Y.L., Nano-mechanical Characterization of Dental Tissues, PhD Thesis. Hong Kong, The University of Hong Kong, 2010, 1-184. |
Researcher : Chen H |
List of Research Outputs |
Chen H., Hong L. and Soh A.K., Effects of film thickness and mismatch strains on magnetoelectric coupling in vertical heteroepitaxial nanocomposite thin films, Journal of Applied Physics. 2011, 109(9): 094102. |
Researcher : Chen K |
Project Title: | Virtual component modelling for components made of a multiphase perfect material |
Investigator(s): | Chen K |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 02/2005 |
Researcher : Chen KZ |
Project Title: | Virtual component modelling for components made of a multiphase perfect material |
Investigator(s): | Chen K |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 02/2005 |
Researcher : Chen MZ |
Project Title: | Passive network synthesis with restricted complexity |
Investigator(s): | Chen MZ |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 08/2010 |
Project Title: | The 8th Asian Control Conference (ASCC 2011) Adaptive rendezvous of multiple mobile agents with nonlinear dynamics and preserved network connectivity |
Investigator(s): | Chen MZ |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 05/2011 |
Completion Date: | 05/2011 |
List of Research Outputs |
Su H.S., Li C. and Chen M.Z., Adaptive rendezvous of multiple mobile agents with nonlinear dynamics and preserved network connectivity, The 8th Asian Control Conference. 2011. |
Wang Q., Du B., Lam J. and Chen M.Z., Stability analysis of Markovian jump systems with multiple delay components and polytopic uncertainties, Circuits, Systems, and Signal Processing. 2011. |
Xu Y., Chen M.Z. and Chen W.J., Buckling and post-buckling of a pumpkin balloon, The 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. 2010, 2671. |
Zhai C., Zhang H.T., Zhao Y., Chen M.Z., Rong Z.H. and Wang B.H., Effective usage of credit records promotes cooperation on weighted networks, Physical Review E. 2010, 81: 036112. |
Zhang H.T., Chen M.Z. and Stan G.B., Fast consensus via predictive pinning control, IEEE Transactions on Circuits and Systems I: Regular Papers. 2011. |
Zhang H.T., Wang N., Chen M.Z., Su R.Q., Zhou T. and Zhou C., Spatially quantifying the leadership eectiveness in collective behaviors, New Journal of Physics. 2010, 12: 123025. |
Researcher : Chen X |
List of Research Outputs |
Chen X. and Ngan A.H.W., Specimen size and grain size effects on tensile strength of Ag microwires, Scripta Materialia. Elsevier, 2011, 64: 717-720. |
Researcher : Chen YH |
Project Title: | Measurements and Multi-modal Modeling of Bone Drilling and Milling |
Investigator(s): | Chen YH |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2008 |
Completion Date: | 12/2010 |
Project Title: | Modeling of compliant needle insertion in minimum invasive surgery (MIS) |
Investigator(s): | Chen YH |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2008 |
Completion Date: | 11/2010 |
Project Title: | Design and Development of A Common Robotic Flatform for Computer-Aided Orthopaedic Surgery Research |
Investigator(s): | Chen YH, Yau WP |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2009 |
Completion Date: | 05/2011 |
Project Title: | Design, analysis and fabrication of microfluidic device for biomedical applications |
Investigator(s): | Chen YH |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2010 |
Project Title: | Investigation of topology optimization based on a visibility sphere |
Investigator(s): | Chen YH |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2011 |
List of Research Outputs |
Mak J.N.F., Hu Y., Cheng A.C.S., Kwok H.Y., Chen Y.H. and Luk K.D.K., Flexion-extension ratio in sitting: application in low back pain rehabilitation, Spine. 2010, 35(16): 1532-1538. |
Mak N.F.J., Hu Y., Cheng A.C., Kwok H.Y., Chen Y.H. and Luk K.D.K., Flexion-Relaxation Ratio in Sitting: Application in Low Back Pain Rehabilitation., Spine. 2010, 35: 1532-8. |
Wang Y.Z., Liu C.J., Huang H.F., Zhang R., Chen Y.H. and Hu Y., Study on one-direction bendable articulated needle, 3rd International Conference on Biomedical Engineering and Informatics (BMEI). 2010, 5: 2114. |
Researcher : Chen Z |
List of Research Outputs |
Chen Z., Selection of Optimal Build Orientation with Minimum Strain and Maximum Strength iin Rapid Prototyping, MPhil Thesis. Hong Kong, The University of Hong Kong, 2010, 1-135. |
Researcher : Cheng C |
List of Research Outputs |
Ng K.Y., Cheng C. and Ngan A.H.W., "Mechanics of nanohoneycombs", invited lecture, Gordon Research Conference on Thin Film and Small-scale Mechanical Behaviour, July 25-30, 2010 at Colby College, Waterville, Maine, USA. 2010. |
Researcher : Cheng HW |
List of Research Outputs |
Chan B.P., Cheng H.W., Chik T.K., Cheung K.M.C. and Luk K.D.K., Methods for Complex Tissue Engineering. , US Regular Patent Application (filed on 14 June 2011) (Application No. 13/159,837). 2011. |
Chan B.P., Cheng H.W., Chik T.K., Cheung K.M.C. and Luk K.D.K., Methods for Complex Tissue Engineering, PCT Patent Application (filed on 15 June 2011) (Application No. pct/cn2011/000988). 2011. |
Cheng H.W., Chan D., Cheung K.M.C. and Chan B.P., Generation of an osteochondral interface using rabbit mesenchymal stem cells (rMSCs) and collagen gel. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada.. 2010, 1068. |
Cheng H.W., Luk K.D.K., Cheung K.M.C. and Chan B.P., In vitro generation of osteochondral interface from mesenchymal stem cell-collagen microspheres. , Biomaterials. 2011, 32: 1526-1535. |
Researcher : Cheng WC |
List of Research Outputs |
Cheng W.C., Tung R.W.T. and Liu C.H., CFD studies of flow and pollutant dispersion in urban street canyon under different thermal stratifications, First International Conference on Sustainable Urbanization (ICSU 2010), December 15 to 17, 2010, Hong Kong, China. 2010. |
Cheng W.C. and Liu C.H., Large-eddy simulation of flow and pollutant dispersion in urban street canyons under different thermal stratifications, Pacific Rim Applications and Grid Middleware Assembly (PRAGMA) 20, March 2 to 4, 2011, Hong Kong, China. 2011. |
Cheng W.C. and Liu C.H., Large-eddy simulation of flow and pollutant transports in and above two-dimensional idealized street canyons, Boundary-layer meteorology. 2011, 139: 411-437. |
Cheng W.C. and Liu C.H., Large-eddy simulation of turbulent transports in urban street canyons in different thermal stabilities, Journal of Wind Engineering and Industrial Aerodynamics. 2011, 99: 434-442. |
Cheng W.C. and Liu C.H., The flow pattern and pollutant removal behavior in different thermal stratifications by large-eddy simulation, European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011 . 2011. |
Liu C.H., Cheng W.C., Chung N.H. and Wong C.C., On the Air Pollutant Removal Mechanism from 2D Urban Street Canyons, European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011. |
Liu C.H., Cheng W.C., Chung N.H. and Wong C.C., On the mechanisms of pollutant removal from urban street canyons: a large-eddy simulation approach, ERCOFTAC Workshop Direct & Large-Eddy Simulation 8, Eindhoven University of Technology, Eindhoven, The Netherlands, July 5-9, 2010 . 2010. |
Researcher : Cheung KC |
Project Title: | 14th World Congress of International Federation of Automatic Control A Fast On-Line Training Algorithm for Neurofuzzy Networks |
Investigator(s): | Cheung KC |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 07/1999 |
Project Title: | A study on the use of fuel cells as replacement for lead-acid batteries in solar-based electrical power generation |
Investigator(s): | Cheung KC |
Department: | Mechanical Engg |
Source(s) of Funding: | Low Budget High Impact Programme |
Start Date: | 11/2001 |
Project Title: | A study on solar-powered water electrolysis for hydrogen production |
Investigator(s): | Cheung KC |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 11/2002 |
Project Title: | Operator and artificial intelligence based approaches to construct the sound perceived by human beings |
Investigator(s): | Cheung KC, Huang L, Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2009 |
Project Title: | Stability analysis of uncertain stochastic neural networks with delays |
Investigator(s): | Cheung KC, Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 01/2010 |
Project Title: | Multi-objective control of vehicle active suspension system |
Investigator(s): | Cheung KC, Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 04/2011 |
List of Research Outputs |
Li H., Cheung K.C., Lam J. and Gao H., Robust stability for interval stochastic neural networks with time-varying discrete and distributed delays, Differential Equations and Dynamical Systems. 2011, 19(1-2): 97-118. |
Researcher : Cheung OP |
List of Research Outputs |
Cheung O.P. and Liu C.H., CFD simulations of natural ventilation behaviour in high-rise buildings in regular and staggered arrangements at various spacings, Energy and Buildings. 2011, 43: 1149-1158. |
Cheung O.P., Computational Fluid Dynamics Simulations on the Natural Ventilation Behaviour within a Building Cluster, MPhil Thesis. Hong Kong, The University of Hong Kong, 2010, 1-147. |
Cheung O.P. and Liu C.H., Large-eddy simulation of the cross-ventilation behavior in an array of low-rise buildings, 9th American Meteorological Society Urban Conference, Keystone, Colorado, USA, August 2-6, 2010. |
Researcher : Cheung SM |
List of Research Outputs |
Cheung S.M., Electric Control of Acoustic Impedance, MPhil Thesis. Hong Kong, The University of Hong Kong, 2010, 1-110. |
Researcher : Cheung WL |
List of Research Outputs |
Cheng Y.Y., Li J.Y., Fok S.L., Cheung W.L. and Chow T.W., 3D FEA of high-performance polyethylene fiber reinforced maxillary dentures, Dental Materials. 2010, 26: 211-219. |
Cheng Y.Y., Cheung W.L. and Chow T.W., Strain analysis of maxillary complete denture with three-dimensional finite element method, Journal of Prosthetic Dentistry. 2010, 103: 309-318. |
Duan B., Wang M. and Cheung W.L., Optimized fabrication of Ca-P/PHBV nanocomposite scaffolds via selective laser sintering for bone tissue engineering, Biofabrication. UK, Institute of Physics, 2011, 3: 015001 (13pp). |
Duan B., Wang M., Zhou W., Cheung W.L., Li Z. and Lu W.W., Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering, Acta Biomaterialia. The Netherlands, Elsevier, 2010, 6: 4495-4505. |
Zhou W., Duan B., Wang M. and Cheung W.L., Isothermal and nonisothermal crystallization kinetics of Poly(L-Lactide)/Carbonated hydroxyapatite nanocomposite microspheres, Advances in Diverse Industrial Applications of Nanocomposites . Vienna, Austria, IN-TECH, 2011, 231-260. |
Zhou W., Wang M. and Cheung W.L., Selective laser sintered Poly(L-Lactide)/Carbonated hydroxyapatite nanocomposite scaffolds: A bottom-up approach, Advances in Diverse Industrial Applications of Nanocomposites. Vienna, Austria, IN-TECH, 2011, 203-230. |
Researcher : Chik TK |
List of Research Outputs |
Chan B.P., Cheng H.W., Chik T.K., Cheung K.M.C. and Luk K.D.K., Methods for Complex Tissue Engineering. , US Regular Patent Application (filed on 14 June 2011) (Application No. 13/159,837). 2011. |
Chan B.P., Cheng H.W., Chik T.K., Cheung K.M.C. and Luk K.D.K., Methods for Complex Tissue Engineering, PCT Patent Application (filed on 15 June 2011) (Application No. pct/cn2011/000988). 2011. |
Chik T.K., Luk K.D.K., Cheung K.M.C. and Chan B.P., Creation of a tissue interface between bone-like construct and soft tissue-like construct. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada.. 2010, 1099. |
Li C.H., Chik T.K., Ngan A.H.W., Chan C.H., Shum D.K.Y. and Chan B.P., Correlation between compositional and mechanical properties of human mesenchymal stem cell-collagen microspheres during chondrogenic differentiation., Tissue Engineering Part A . 2011, 17(5-6): 777-788. |
Researcher : Chiu WK |
Project Title: | The 2011 International CAD Conference and Exhibition (CAD'11) Adaptive meshing of 2D heterogeneous objects using material quadtree |
Investigator(s): | Chiu WK |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 06/2011 |
Completion Date: | 06/2011 |
List of Research Outputs |
Chiu W.K., Kou X. and Tan S.T., Adaptive meshing of 2D heterogeneous objects using materials quadtree, Computer-aided Design & Applications. 2011, 1-12. |
Researcher : Chow KW |
Project Title: | Nonlinear localized modes and their dynamics: applications in hydrodynamics and optics |
Investigator(s): | Chow KW, Rogers C |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2006 |
Project Title: | The nonlinear Schrödinger models with novel nonlinearities: their applications in capillarity and physics of optical fibers |
Investigator(s): | Chow KW, Rogers C |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2008 |
Completion Date: | 12/2010 |
Project Title: | Wave propagation in non-uniform media: Effects of amplification / attenuation and marginal stability |
Investigator(s): | Chow KW |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2009 |
Project Title: | Competing nonlinearities in systems of hydrodynamic waves |
Investigator(s): | Chow KW, Zhang D |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2010 |
Completion Date: | 06/2011 |
List of Research Outputs |
Chow K.W. and Ng T.W., Periodic solutions of a derivative nonlinear Schrödinger equation: Elliptic integrals of the third kind, Journal of Computational and Applied Mathematics. Elsevier B.V., 2011, 235: 3825-3830. |
Ee B.K., Grimshaw R.H.J., Chow K.W. and Zhang D., Steady transcritical flow over an obstacle: Parametric map of solutions of the forced extended Korteweg-de Vries equation, Physics of Fluids. American Institute of Physics, 2011, 23: 046602-1 to 046602-4. |
Fan E. and Chow K.W., Darboux covariant Lax pairs and infinite conservation laws of the (2+1)-dimensional breaking soliton equation, Journal of Mathematical Physics. American Institute of Physics, 2011, 52: 023504-1 to 023504-10. |
Fan E. and Chow K.W., On the periodic solutions for both nonlinear differential and difference equations: A unified approach, Physics Letters A. Elsevier B.V., 2010, 374: 3629-3634. |
Fan Y., Cheng S.W.K., Qing K. and Chow K.W., Endovascular repair of type B aortic dissection: a study by computational fluid dynamics, Journal of Biomedical Science and Engineering. Scientific Research, 2010, 3: 900-907. |
Kraenkel R.A., Nakkeeran K. and Chow K.W., Integrable NLS equation with time-dependent nonlinear coefficient and self-similar attractive BEC, Communications in Nonlinear Science and Numerical Simulations. Elsevier B.V., 2011, 16: 86-92. |
Rogers C., Malomed B., Chow K.W. and An H., Ermakov-Ray-Reid systems in nonlinear optics, Journal of Physics A: Mathematical and Theoretical. IOP Publishing Ltd, 2010, 43: 455214 (15pp). |
Tsang A.C.H., Malomed B.A., Lam C.K. and Chow K.W., Solitons pinned to hot spots, The European Physical Journal D. 2010, 59: 81-89. |
Tsang C.H. and Chow K.W., Exact solutions of the Poisson Boltzmann equation in electrokinetic flows, 63th American Physical Society Division of Fluid Dynamics Meeting, Long Beach, California, USA. 2010. |
Yee T.L. and Chow K.W., A "Localized Pulse-Moving Front" pair in a system of coupled complex ginzburg-landau equations, Journal of the Physical Society of Japan. The Physical Society of Japan, 2010, 79(12): 124003-1 to 124003-7. |
Yee T.L., Tsang C.H., Malomed B.A. and Chow K.W., Exact solutions for domain walls in coupled complex Ginzburg Landau equations, Journal of the Physical Society of Japan. 2011, 80: 064001-1 to 064001-7. |
Researcher : Choy THA |
List of Research Outputs |
Choy T.H.A., Leong K. and Chan B.P., Controlling Glycosaminoglycan (gag) Incorporation And Retention In Collagen-Gag Co-Precipitates By Chemical Modification Of Collagen. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada.. 2010, 1069. |
Choy T.H.A., Leong K. and Chan B.P., The Effect of Chemical Modification of Collagen on Collagen-Glycosaminoglycan Co-Precipitate for Nucleus Pulposus Replacement. , 2010 IEEE International Conference on Nano/Molecular Medicine and Engineering. Dec 5-9, 2010. Hong Kong, China.. 2010, 67. |
Researcher : Chu HCW |
List of Research Outputs |
Chu H.C.W. and Ng C.O., Electrohydrodynamic slip flow through a micropatterned channel, Proceedings of the 15th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 7th Jiangsu-Hong Kong Forum on Mechanics and Its Application, and the 2nd Symposium on the Development of Mechanics in Macau, Hong Kong and Macau, March 11-12. HKSTAM, 2011, 8. |
Ng C.O., Chu H.C.W. and Wang C.Y., On the effects of liquid-gas interfacial shear on slip flow through a parallel-plate channel with superhydrophobic grooved walls, Physics of Fluids. 2010, 22(10): 102002. |
Researcher : Chung NH |
List of Research Outputs |
Chung N.H. and Liu C.H., Favorable street canyon aspect ratios for pollutant removal - a large-eddy simulation approach, European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011. |
Chung N.H. and Liu C.H., Large-eddy simulation of flows and pollutant removal in street canyons of different aspect ratios, Pacific Rim Applications and Grid Middleware Assembly (PRAGMA) 20, March 2 to 4, 2011, Hong Kong, China. 2011. |
Chung N.H. and Liu C.H., Numerical investigation of pollutant transfer coefficients in street canyons of different aspect ratios, 9th American Meteorological Society, Symposium on Urban Environment, Keystone, Colorado, USA, August 2-6, 2010. |
Liu C.H., Zhou X. and Chung N.H., Heat dispersion study for transformer bay ventilation improvement for Kennedy Road substation building, 2011. |
Liu C.H., Cheng W.C., Chung N.H. and Wong C.C., On the Air Pollutant Removal Mechanism from 2D Urban Street Canyons, European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011. |
Liu C.H., Cheng W.C., Chung N.H. and Wong C.C., On the mechanisms of pollutant removal from urban street canyons: a large-eddy simulation approach, ERCOFTAC Workshop Direct & Large-Eddy Simulation 8, Eindhoven University of Technology, Eindhoven, The Netherlands, July 5-9, 2010 . 2010. |
Researcher : Diao H |
List of Research Outputs |
Wong M.Y., Wong H.L., Diao H., Chan G.C.F., Yang Z. and Chan B.P., Regulation of migration characteristics of human mesenchynal stem cells (hMSCs) by encapsulation in collagen matrix. , International Society of Stem Cell Research (ISSCR) 9th Annual Meeting, June 15 - 18, 2011, Toronto, Ontario Canada. . 2011, 147. |
Yuan M., Yeung C.W., Diao H. and Chan B.P., Differentiation Of Mesenchymal Stem Cells Into Nucleus Pulposus Cells With The Use Of Microencapsulation In Vitro. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada. . 2010, 1092. |
Researcher : Du B |
List of Research Outputs |
Du B., Lam J. and Shu Z., Stabilization for state/Input delay systems via static and integral output feedback, Automatica. 2010, 46(12): 2000-2007. |
Gao H., Fei Z., Lam J. and Du B., Further results on exponential estimates of markovian jump systems with mode-dependent time-varying delays, IEEE Transactions on Automatic Control. 2011, 56(1): 223-229. |
Researcher : Du Q |
List of Research Outputs |
Du Q. and Leung Y.C., 2D numerical simulation of ocean waves, World Renewable Energy Congress 2011. Sweden, CD Rom: 7pp. |
Researcher : Duan B |
List of Research Outputs |
Duan B. and Wang M., Customized Ca-P/PHBV nanocomposite scaffolds for bone tissue engineering: Design, fabrication, surface modification and sustained release of growth factor, Journal of the Royal Society Interface. London, UK, The Royal Society, 2010, 7: S615-S629. |
Duan B., Developing Calcium Phosphate/Poly(hydroxybutyrate-co-hydroxyvalerate) Nanocomposite Scaffolds via Selective Laser Sintering for Bone Tissue Engineering, PhD Thesis. Hong Kong, The University of Hong Kong, 2010, 1-350. |
Duan B. and Wang M., Encapsulation and release of biomolecules from Ca-P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering, Polymer Degradation and Stability. Elsevier, 2010, 95: 1655-1664. |
Duan B., Wang M. and Cheung W.L., Optimized fabrication of Ca-P/PHBV nanocomposite scaffolds via selective laser sintering for bone tissue engineering, Biofabrication. UK, Institute of Physics, 2011, 3: 015001 (13pp). |
Duan B. and Wang M., Selective laser sintered Ca-P/PHBV nanocomposite scaffolds with sustained release of rhBMP-2 for bone tissue engineering, Proceedings of the 35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’11). Daytona Beach, FL, USA, 2011, CD-ROM: 1pp. |
Duan B., Wang M., Li Z., Chan W.C. and Lu W.W., Surface modification of three-dimensional Ca-P/PHBV nanocomposite scaffolds by physical entrapment of gelatin and its In vitro biological evaluation, Frontiers of Materials Science. Germany, Springer, 2011, 5(1): 57-68. |
Duan B., Wang M., Zhou W., Cheung W.L., Li Z. and Lu W.W., Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering, Acta Biomaterialia. The Netherlands, Elsevier, 2010, 6: 4495-4505. |
Wang M. and Duan B., Nanocomposite scaffolds for bone tissue engineering: Design, fabrication, surface modification and sustained release of growth factor, Materials Research Society Symposium Proceedings. Boston, USA, Materials Reserach Society, 2011, 1301: 99-110. |
Wang M. and Duan B., Nanocomposite scaffolds for bone tissue engineering: design, fabrication, surface modification and sustained release of growth factor, Materials Research Society Fall Meeting. Boston, USA, 2010. |
Zhou W., Duan B., Wang M. and Cheung W.L., Isothermal and nonisothermal crystallization kinetics of Poly(L-Lactide)/Carbonated hydroxyapatite nanocomposite microspheres, Advances in Diverse Industrial Applications of Nanocomposites . Vienna, Austria, IN-TECH, 2011, 231-260. |
Researcher : Duan B |
List of Research Outputs |
Duan B. and Wang M., Customized Ca-P/PHBV nanocomposite scaffolds for bone tissue engineering: Design, fabrication, surface modification and sustained release of growth factor, Journal of the Royal Society Interface. London, UK, The Royal Society, 2010, 7: S615-S629. |
Duan B., Developing Calcium Phosphate/Poly(hydroxybutyrate-co-hydroxyvalerate) Nanocomposite Scaffolds via Selective Laser Sintering for Bone Tissue Engineering, PhD Thesis. Hong Kong, The University of Hong Kong, 2010, 1-350. |
Duan B. and Wang M., Encapsulation and release of biomolecules from Ca-P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering, Polymer Degradation and Stability. Elsevier, 2010, 95: 1655-1664. |
Duan B., Wang M. and Cheung W.L., Optimized fabrication of Ca-P/PHBV nanocomposite scaffolds via selective laser sintering for bone tissue engineering, Biofabrication. UK, Institute of Physics, 2011, 3: 015001 (13pp). |
Duan B. and Wang M., Selective laser sintered Ca-P/PHBV nanocomposite scaffolds with sustained release of rhBMP-2 for bone tissue engineering, Proceedings of the 35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’11). Daytona Beach, FL, USA, 2011, CD-ROM: 1pp. |
Duan B., Wang M., Li Z., Chan W.C. and Lu W.W., Surface modification of three-dimensional Ca-P/PHBV nanocomposite scaffolds by physical entrapment of gelatin and its In vitro biological evaluation, Frontiers of Materials Science. Germany, Springer, 2011, 5(1): 57-68. |
Duan B., Wang M., Zhou W., Cheung W.L., Li Z. and Lu W.W., Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering, Acta Biomaterialia. The Netherlands, Elsevier, 2010, 6: 4495-4505. |
Wang M. and Duan B., Nanocomposite scaffolds for bone tissue engineering: Design, fabrication, surface modification and sustained release of growth factor, Materials Research Society Symposium Proceedings. Boston, USA, Materials Reserach Society, 2011, 1301: 99-110. |
Wang M. and Duan B., Nanocomposite scaffolds for bone tissue engineering: design, fabrication, surface modification and sustained release of growth factor, Materials Research Society Fall Meeting. Boston, USA, 2010. |
Zhou W., Duan B., Wang M. and Cheung W.L., Isothermal and nonisothermal crystallization kinetics of Poly(L-Lactide)/Carbonated hydroxyapatite nanocomposite microspheres, Advances in Diverse Industrial Applications of Nanocomposites . Vienna, Austria, IN-TECH, 2011, 231-260. |
Researcher : Duggan BJ |
List of Research Outputs |
Duggan B.J., Tse Y.Y., Lam G. and Quadir M.Z., Deformation and recrystallization of interstitial free (IF) steel, Materials and Manufacturing Processes. Taylor & Francis Group, 2011, 26: 51-57. |
Researcher : Fan Y |
List of Research Outputs |
Fan Y., Cheng S.W.K., Qing K. and Chow K.W., Endovascular repair of type B aortic dissection: a study by computational fluid dynamics, Journal of Biomedical Science and Engineering. Scientific Research, 2010, 3: 900-907. |
Researcher : Feng L |
List of Research Outputs |
Huang L., Ma X. and Feng L., Suppression of broadband noise radiated by a low-speed fan in a duct, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA. MELVILLE, NY 11747-4502 USA, ACOUSTICAL SOC AMER AMER INST PHYSICS, 2010, 128: 152-163. |
Researcher : Feng Z |
List of Research Outputs |
Feng Z. and Lam J., Stability and dissipativity analysis of distributed delay cellular neural networks, IEEE Transactions on Neural Networks. 2011, 22(6): 976-981. |
Researcher : Fu X |
Project Title: | The 1st International Conference on Clean Energy Photocatalytic reforming of C3-polyols for H2 production: Work (II) role of their OH groups Photocatalytic reforming of C3-polyols for H2 production: Work (I) FTIR study on the adsorption and photocatalytic reforming reaction of 2-propanol on Pt/TiO2 |
Investigator(s): | Fu X |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 04/2011 |
Completion Date: | 04/2011 |
List of Research Outputs |
Fu X., Wang X., Leung Y.C., Gu Q., Chen S. and Huang H., Photocatalytic reforming of C3-polyols for H2 production:: Part (I). Role of their OH groups, Applied Catalysis B: Environmental. 2011. |
Fu X., Leung Y.C., Wang X.X., Xue W.W. and Fu X.Z., Photocatalytic reforming of ethanol to H2 and CH4 over ZnSn(OH)6 nanocubes, International Journal of Hydrogen Energy. Elsevier, 2011, 36: 1524-1530. |
Fu X., Leung Y.C. and Leung M.K.H., Photocatalytic reforming of glucose over La doped Alkali tantalate photocatalysts for H2 production, In: Angelika Brückner , Catalysis Communications . Elsevier, 2010. |
Fu X., Wang X., Leung Y.C., Xue W., Ding Z. and Huang H., Photocatalytic reforming of glucose over La doped alkali tantalate photocatalysts for H2 production, Catalysis Communications. 2011. |
Huang H., Leung Y.C., Li G., Leung M.K.H. and Fu X., Photocatalytic destruction of air pollutants with vacuum ultraviolet (VUV) irradiation, Catalysis Today. 2011. |
Huang H., Leung Y.C. and Fu X., Vacuum ultraviolet-irradiated photocatalysis--an advanced process for VOCs abatement, 6th International Conference on Environmental Catalysis (ICEC 2010). 2010. |
Researcher : Gong J |
List of Research Outputs |
Gong J., Miultiple Solutions of Smoke Flow in Building Fires, PhD Thesis. Hong Kong, The University of Hong Kong, 2010, 1-154. |
Gong J. and Li Y., Multiple solutions of smoke flow in a building with an opposing wind, International Journal of Ventilation. 2010, 9: 99-114. |
Researcher : Han SJ |
Project Title: | Intracellular degradation of a 3D collagen scaffold by human mesenchymal stem cells: its role in chondrogenic differentiation and new matrix synthesis |
Investigator(s): | Han SJ, Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 01/2011 |
List of Research Outputs |
Mrozek M., Zelawski M., Han S.J. and Krajniak A., Homological Methods For Extraction And Analysis Of Linear Features In Multidimensional Images, In: CHING Y. SUEN, EDWIN HANCOCK, SONG-WHAN LEE, Pattern Recognition. Elsevier, 2011. |
Researcher : Hang J |
Project Title: | Quantifying the effect of building height variation on pollutant removal and heat removal from high-rise compact building arrays |
Investigator(s): | Hang J, Li Y |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 01/2011 |
Researcher : Ho FC |
List of Research Outputs |
Chan B.P., Au-yeung K.L., Kwok C.B., Ho F.C. and Li C.W., Compression-induced alignment of human mesenchymal stem cells in 3D collagen constructs., Global Spine Congress 2011, March 24-26, 2011, Barcelona, Spain. . 2011, 1724. |
Chan B.P., Ho F.C. and Li C.W., Compression-induced alignment of human mesenchymal stem cells in collagen constructs. , International Socity of Stem Cell Research (ISSCR) 9th Annual Meeting, June 15 - 18, 2011, Toronto, Ontario Canada. 2011, 97. |
Ho F.C. and Chan B.P., Effect of Dynamic Mechanical Compression on Actin Cytoskeleton Network of Human Mesenchymal Stem Cells (hMSCs) in Three Dimensional Collagen Environments. , 2010 IEEE International Conference on Nano/Molecular Medicine and Engineering. Dec 5-9, 2010. Hong Kong, China. 2010, 65. |
Ho F.C. and Chan B.P., Effect of dynamic compression on actin cytoskeleton network of human mesenchymal stem cells in three dimensional collagen constructs, Gordon Conference on Musculoskeletal Biology and Bioengineering. 1-6 Aug 2010, Andover, New Hamshire, MA.. 2010, 26. |
Researcher : Hong L |
List of Research Outputs |
Chen H., Hong L. and Soh A.K., Effects of film thickness and mismatch strains on magnetoelectric coupling in vertical heteroepitaxial nanocomposite thin films, Journal of Applied Physics. 2011, 109(9): 094102. |
Hong L. and Soh A.K., Control of domain states in individual PbTiO(3) nanoparticles by prescribed strains, Key Engineering Materials. 2011, 465: 203-206. |
Hong L. and Soh A.K., Unique vortex and stripe domain structures in PbTiO(3) epitaxial nanodots, Mechanics of Materials. 2011, 43(6): 342-347. |
Researcher : Hu B |
List of Research Outputs |
Hu B., Actin-Based Propulsion and Entropic Forces Generated by Single Filament, MPhil Thesis. Hong Kong, The University of Hong Kong, 2011, 1-116. |
Lin Y., Shenoy V...B., Hu B. and Bai L., A Microscopic Formulation for the Actin-Driven Motion of Listeria in Curved Paths, Biophysical Journal. 2010, 99: 1043-1052. |
Researcher : Huang H |
Project Title: | Destruction of multiple indoor air pollutants using photocatalysis irradiated by ozone-producing UV lamp |
Investigator(s): | Huang H, Leung YC, Leung MKH |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 10/2009 |
Completion Date: | 03/2011 |
List of Research Outputs |
Fu X., Wang X., Leung Y.C., Gu Q., Chen S. and Huang H., Photocatalytic reforming of C3-polyols for H2 production:: Part (I). Role of their OH groups, Applied Catalysis B: Environmental. 2011. |
Fu X., Wang X., Leung Y.C., Xue W., Ding Z. and Huang H., Photocatalytic reforming of glucose over La doped alkali tantalate photocatalysts for H2 production, Catalysis Communications. 2011. |
Huang H., Ye D.Q. and Leung Y.C., Abatement of toluene in the plasma-driven catalysis: mechanism and reaction kinetics, IEEE Transactions on Plasma Science. UK, IEEE, 2011, 39: 877-882. |
Huang H. and Leung Y.C., Complete elimination of indoor formaldehyde over supported Pt catalysts with extremely low Pt content at ambient temperature, Journal of Catalysis. Elsevier, 2011, 280: 60-67. |
Huang H. and Leung Y.C., Complete oxidation of formaldehyde at room temperature using TiO2 supported metallic Pd nanoparticles, ACS Catalysis. USA, American Chemical Society, 2011, 1: 348-354. |
Huang H., Leung Y.C. and Ye D., Effect of reduction treatment on structural properties of TiO2 supported Pt nanoparticles and their catalytic activity for formaldehyde oxidation, Journal of Materials Chemistry. 2011, 21(26): 9647-9652. |
Huang H. and Leung Y.C., Oxidation of formaldehyde at room temperature with Au/TiO2 catalysts, 15th National Conference on Catalysis. Guangzhou, China, 2010, CD-Rom. |
Huang H., Leung Y.C., Li G., Leung M.K.H. and Fu X., Photocatalytic destruction of air pollutants with vacuum ultraviolet (VUV) irradiation, Catalysis Today. 2011. |
Huang H., Ye D. and Leung Y.C., Plasma-Driven Catalysis Process for Toluene Abatement: Effect of Water Vapor, Plasma Science, IEEE Transactions on. 2011, (99): 1-5. |
Huang H. and Leung Y.C., Purification of gaseous formaldehyde at room temperature using highly efficient nano-scale noble metal catalysts prepared by liquid phase reduction at low temperature, Chinese Petent. 2010. |
Huang H., Removal of Air Pollutants by Photocatalysis with Ozone in a Continuous-Flow Reactor, Environmental Engineering Science. 2011, 27(8): 651-656. |
Huang H., Ye D.Q. and Leung Y.C., Removal of toluene using UV-irradiated and nonthermal plasma-driven photocatalyst system, Journal of Environmental Engineering. USA, ASCE, 2010, 136: 1231-1236. |
Huang H., Leung Y.C. and Fu X., Vacuum ultraviolet-irradiated photocatalysis--an advanced process for VOCs abatement, 6th International Conference on Environmental Catalysis (ICEC 2010). 2010. |
Researcher : Huang L |
Project Title: | The suppression of multiple tones for small axial-flow fans |
Investigator(s): | Huang L |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 12/2005 |
Project Title: | Blower noise source identification and mitigation for notebook PCs |
Investigator(s): | Huang L |
Department: | Mechanical Engg |
Source(s) of Funding: | Intel Corporation - General Award |
Start Date: | 05/2007 |
Project Title: | Broadband Duct Noise Control Inspired by the Middle Ear Mechanisms |
Investigator(s): | Huang L |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2009 |
Completion Date: | 12/2010 |
Project Title: | Exploring a new approach of ground noise control for the over-land supersonic transportation |
Investigator(s): | Huang L |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2009 |
Project Title: | Study of two prototype problems of confined noise sources |
Investigator(s): | Huang L |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2010 |
Project Title: | Development of an Environmentally Friendly Sound Absorption Panel for Broadband Noise Reduction Purpose |
Investigator(s): | Huang L, Chan YJ |
Department: | Mechanical Engg |
Source(s) of Funding: | Innovation and Technology Support Programme (Tier 3) |
Start Date: | 06/2011 |
List of Research Outputs |
Huang L., Best Teachers Award 2010-2011, Faculty of Engineering, The University of Hong Kong. 2011. |
Huang L. and Morgans A.S., Passive control of combustion instability through an acoustic valve, Journal of Propulsion Technology. 推进技术, Beijing, China Aerospace Science & Industry Corporation, 2010, 31: 701-709. |
Huang L., Ma X. and Feng L., Suppression of broadband noise radiated by a low-speed fan in a duct, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA. MELVILLE, NY 11747-4502 USA, ACOUSTICAL SOC AMER AMER INST PHYSICS, 2010, 128: 152-163. |
Researcher : Huang M |
Project Title: | The nucleation mechanism of nano-sized twins in Twinning Induced Plasticity (TWIP) steels |
Investigator(s): | Huang M |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 10/2010 |
Project Title: | The 5th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD5) Effect of solid solution on the work hardening capacity of ultrafine grained Fe based alloys |
Investigator(s): | Huang M |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 03/2011 |
Completion Date: | 03/2011 |
List of Research Outputs |
Bouaziz O., Barges P., Maugis P. and Huang M., A nanometre-sized porous phase in iron–carbon–boron system, Materials Letters. Elesvier, 2010, 64: 2559. |
Bouaziz O., Zurob H., Chehab B., Embury J.D., Allain S. and Huang M., Effect of chemical composition on the work hardening of Fe-Mn-C TWIP steels, Materials Science and Technology. Maney Publishing, 2011, 27: 707. |
Bouaziz O., Allain S., Huang M. and Barbier D., Effects of microstructural length scales and of carbon content on the work hardening of Twinning Induced Plasticity Steels, The First International Conference on High Manganese Steels, Seoul, Korea. 2011. |
Huang M., Bouaziz O. and Barbier D., Effect of Carbon Content on the Work Hardening of Twinning Induced Plasticity Steels, The International Conference on Advanced Steels (ICAS), Guilin, China. 2010. |
Huang M., Barbier D., Bouaziz O., Hamouche Z. and Chevalier J., Effect of solid solution on the work hardening capacity of ultrafine grained Fe based alloys, The 5th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD5), Nanjing, China. 2011. |
Huang M., Bouaziz O., Barbier D. and Allain S., Modelling The Effect Of Carbon On Deformation Behaviour Of Twinning Induced Plasticity Steels, Journal Of Materials Science. Springer, 2011, 46: 7410. |
Huang M., Perlade A. and Rivera-Díaz-del-Castillo P...E...J..., Predicting the evolution of dislocation density following hot deformation, Philosophical Magazine Letters. Taylor & Francis, 2011, 91: 387. |
Zhu K., Bouaziz O., Oberbillig C. and Huang M., An Approach to Define The Effective Lath Size Controlling Yield Strength of Bainite, Materials Science and Engineering A. Elesvier, 2010, 527: 6614. |
Researcher : Hui SCM |
List of Research Outputs |
Hui S.C.M. and Wong M.K.F., Benchmarking the energy performance of hotel buildings in Hong Kong, 香港酒店建築物能耗表現的基準分析, Proceedings of the Liaoning (Dalian) -- Hong Kong Joint Symposium 2010, 2-3 July 2010, Dalian, China. Dalian, China, Conference organisers, 2010, 56-69. |
Hui S.C.M., Building energy codes in Hong Kong, Invited presentation for TYS Energy Seminar 2011: Green Building is Leading Asia, 19 Jan 2011 (Wed), Hotel Nikko Hong Kong, Tsimshashui East, Kowloon, Hong Kong. Hong Kong, Trane Hong Kong, 2011, N/A. |
Hui S.C.M., Development of technical guidelines for green roof systems in Hong Kong, Proceedings of Joint Symposium 2010 on Low Carbon High Performance Buildings. Hong Kong, Conference organisers, 2010, 1-8. |
Hui S.C.M., Energy benchmarking for buildings and plant engineering, Proceeding of the SOE Symposium 2010: Sustainable Plant Engineering for Achieving Green and Environmental Friendliness Facilities in Asia, 10 July 2010, TU201, PolyU, Hong Kong. Hong Kong, SOE Hong Kong Region, 2010, 87-97. |
Hui S.C.M., Green roof urban farming for buildings in high-density urban cities, 高密度城市建筑屋顶绿化及都市农业, Hainan China World Green Roof Conference 2011, 18-21 March 2011, Hainan (Haikuo, Boao and Sanya), China. 中国海南2011 世界屋顶绿化大会,2011 年3 月18-21 日,中国海南(海口,博鳌,三亚), Hainan, China, Conference organiser, 2011, 1-9. |
Hui S.C.M., Towards zero energy and zero carbon buildings, 走向零能耗零碳建築, Invited keynote speech at the 2011 International Conference on Green Energy & Refrigeration and Air Conditioning, 12 Jun 2011 (Sun), National Chin-Yi University of Technology, Taichung, Taiwan. 主題演講,2011綠色能源與冷凍空調國際學術研討會,2011年6月12日,國立勤益科技大學,台中,台灣, Taichung, Taiwan, National Chin-Yi University of Technology, Taichung, Taiwan, 2011, N/A. |
Researcher : Ip RWL |
Project Title: | Axial-fugal Flow Turbo-machines: A New Family Group of Airflow Machines for Specific Industrial Applications |
Investigator(s): | Ip RWL |
Department: | Mechanical Engg |
Source(s) of Funding: | Matching Grant for Joint Research |
Start Date: | 03/2010 |
Researcher : Jiang W |
List of Research Outputs |
Jiang W., Synthesis and Thermal Conductivity of Nanofluids, MPhil Thesis. Hong Kong, The University of Hong Kong, 2010, 1-107. |
Researcher : Kou X |
Project Title: | Doris Zimmern HKU-Cambridge Hughes Hall Fellowships 2010-11 |
Investigator(s): | Kou X |
Department: | Mechanical Engg |
Source(s) of Funding: | Doris Zimmern HKU-Cambridge Hughes Hall Fellowships |
Start Date: | 09/2010 |
List of Research Outputs |
Chiu W.K., Kou X. and Tan S.T., Adaptive meshing of 2D heterogeneous objects using materials quadtree, Computer-aided Design & Applications. 2011, 1-12. |
Kou X. and Tan S.T., A Simple and Effective Geometric Representation for Irregular Porous Structure Modeling, Computer-Aided Design. Elsevier, 2010, 42: 930-941. |
Kou X., Tan S.T. and Lipson H., A data-driven process for estimating nonlinear materials models , Applied Mechanics and Materials. Switzerland, Trans Tech Publications, 2011, 50-51: 599-604. |
Researcher : Lam CK |
List of Research Outputs |
Tsang A.C.H., Malomed B.A., Lam C.K. and Chow K.W., Solitons pinned to hot spots, The European Physical Journal D. 2010, 59: 81-89. |
Researcher : Lam HN |
Project Title: | GIS -based Intelligent Management of Building Facilities and Security System |
Investigator(s): | Lam HN |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 11/2007 |
Project Title: | Intelligent Control Strategy for Direct Expansion Air Conditioning Systems |
Investigator(s): | Lam HN |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 12/2008 |
Completion Date: | 11/2010 |
Project Title: | Powerline-based Smart Energy System for User Decision Support and Energy Saving |
Investigator(s): | Lam HN |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 12/2009 |
Project Title: | Integrating geothermal heat pump with novel liquid desiccant dehumidification for environmentally friendly air conditioning design in sub-tropical regions |
Investigator(s): | Lam HN |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 12/2010 |
Project Title: | Far Infrared Heating System for Liquid-Desiccant-Based Air Dehumidification |
Investigator(s): | Lam HN |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 02/2011 |
List of Research Outputs |
Lam H.N., Design Considerations for FIR Applications to Food Processing Industry, Workshops on Far Infrared Rays (FIR) Technology for Food Processing and Healthcare Products. 2011. |
Lam H.N., Design Considerations for FIR Applications to Healthcare Industry, Workshops on Far Infrared Rays (FIR) Technology for Food Processing and Healthcare Products. 2011. |
Lam H.N., Energy and Cost Saving Opportunities Based on Useful Technologies, HuaWei - HKU Technology Day. 2010. |
Lam H.N., Far Infrared Radiation Technology - How Useful Is It?, Seminar on Far Infrared Radiation Technology for Environmental Protection. 2011. |
Researcher : Lam J |
Project Title: | Synthesis of Networked Dynamic Systems with Improved Stability and Performance |
Investigator(s): | Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2008 |
Completion Date: | 12/2010 |
Project Title: | Outstanding Researcher Award 2007-2008 |
Investigator(s): | Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | Outstanding Researcher Award |
Start Date: | 10/2008 |
Project Title: | Robust Synthesis of Quantum Systems |
Investigator(s): | Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 01/2009 |
Project Title: | Dissipativity Analysis and Related Reduced-Order Synthesis for Stochastic Delay Systems |
Investigator(s): | Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 11/2009 |
Project Title: | Design of Distributed Filters for Multi-agent Systems |
Investigator(s): | Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 01/2010 |
Completion Date: | 12/2011 |
Project Title: | 19th International Symposium on Mathematical Theory of Networks and Systems Strong practical stability and stabilization of discrete linear repetitive processes - a new simple approach |
Investigator(s): | Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 07/2010 |
Completion Date: | 07/2010 |
Project Title: | Iterative Solutions to Linear Matrix Equations Arising from Control Theory |
Investigator(s): | Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 01/2011 |
Project Title: | Control Synthesis and Approximation of Jump Systems with Uncertain Transitions and Positive Characteristics |
Investigator(s): | Lam J |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2011 |
List of Research Outputs |
Du B., Lam J. and Shu Z., Stabilization for state/Input delay systems via static and integral output feedback, Automatica. 2010, 46(12): 2000-2007. |
Feng J., Lam J., Li P. and Shu Z., Decay rate constrained stabilization of positive systems using static output feedback, International Journal of Robust and Nonlinear Control. 2011, 21(1): 44-54. |
Feng Z. and Lam J., Stability and dissipativity analysis of distributed delay cellular neural networks, IEEE Transactions on Neural Networks. 2011, 22(6): 976-981. |
Galkowski K., Dabkowski P., Rogers E., Bachelier O. and Lam J., A new approach to strong practical stability and stabilization of discrete linear repetitive processes, MTNS 2010. Budapest, Hungary, 311-317. |
Gao H., Fei Z., Lam J. and Du B., Further results on exponential estimates of markovian jump systems with mode-dependent time-varying delays, IEEE Transactions on Automatic Control. 2011, 56(1): 223-229. |
Lam J., Associate Editor , International Journal of Applied Mathematics and Computer Science. 2010. |
Lam J., Associate Editor, Automatica. 2011. |
Lam J., Associate Editor, Conference Editorial Board of IEEE Control Systems Society. 2010. |
Lam J., Associate Editor, Dynamics of Continuous, Discrete, and Impulsive Systems – Series B. 2010. |
Lam J., Associate Editor, IEEE Transactions on Signal Processing. 2010. |
Lam J., Distinguished Visiting Fellow, Royal Academy of Engineering. 2010. |
Lam J., Editoral Member, Journal of Electrical and Computer Engineering. 2010. |
Lam J., Li Z., Wei Y., Feng J. and Chung K.W., Estimates of the spectral condition number, Linear and Multilinear Algebra. 2011, 59(3): 249-260. |
Lam J., Guest Professorship, East China University of Science and Technology. 2010. |
Lam J., Guest Professorship, Southwest University of Nationalities. 2011. |
Lam J., Member of Editorial Board, IET Control Theory and Applications. 2011. |
Lam J., Member of Editorial Board, International Journal of Systems, Control and Communications. 2011. |
Lam J., Member of Editorial Board, Proc. IMechE Part I: Journal of Systems and Control Engineering. 2010. |
Lam J., Member of Editorial Board, The Open Automation and Control Journal. 2011. |
Lam J., Most Cited Paper (2006-2010) --- Gao, Chen, and Lam (2008), Automatica. 2011. |
Lam J., Most Cited Paper (2006-2010) --- Xu and Lam (2006), Neural Networks. 2011. |
Lam J., Most Cited Paper (2006-2010) --- Xu, Lam, and Zou (2006), Automatica. 2011. |
Lam J., Subject Editor, Journal of Sound and Vibration. 2011. |
Li H., Cheung K.C., Lam J. and Gao H., Robust stability for interval stochastic neural networks with time-varying discrete and distributed delays, Differential Equations and Dynamical Systems. 2011, 19(1-2): 97-118. |
Li P. and Lam J., Disturbance analysis of nonlinear differential equation models of genetic SUM regulatory networks, IEEE/ACM Transactions on Computational Biology and Bioinformatics. 2011, 8(1): 253-259. |
Li P., Lam J. and Shu Z., H¥ positive filtering for positive linear discrete-time systems: An augmentation approach, IEEE Transactions on Automatic Control. 2010, 55(10): 2337-2342. |
Wang Q., Du B., Lam J. and Chen M.Z., Stability analysis of Markovian jump systems with multiple delay components and polytopic uncertainties, Circuits, Systems, and Signal Processing. 2011. |
Wang Z., Lam J., Ma L., Bo Y. and Guo Z., Variance-constrained dissipative observed-based control for a class of nonlinear stochastic systems with degraded measurements, Journal of Mathematical Analysis and Applications. 2011, 377(2): 645-658. |
Wu L., Lam J., Gao H. and Xiong J., Robust guaranteed cost Control of discrete-time networked control systems, Optimal Control Applications and Methods. 2011, 32(1): 95-112. |
Zhang J., Lam J. and Xia Y., Observer-based output feedback control for discrete systems with quantized inputs, IET Control Theory and Applications. 2011, 5(3): 478-485. |
Zhang L. and Lam J., Necessary and sufficient conditions for analysis and synthesis of markov jump linear systems with incomplete transition descriptions, IEEE Transactions on Automatic Control. 2010, 55(7): 1695-1701. |
Zhao Y., Gao H. and Lam J., New results on H¥ filtering for fuzzy systems with interval time-varying delays, Information Sciences. 2011, 181(11): 2356-2369. |
Zhou S. and Lam J., H¥ filtering for delayed systems with nonlinear fractional transformation forms, Circuits, Systems and Signal Processing. 2010, 29(4): 601-627. |
Zhou S., Ren W. and Lam J., Stabilization for T-S model based uncertain stochastic systems, Information Sciences. 2011, 181(4): 779-791. |
Researcher : Lee WC |
List of Research Outputs |
Lee W.C. and Wang M., Formation of a titania nanotube layer on the titanium alloy surface via DC anodization for biomedical applications, Proceedings of the Biomedical Engineering Conference (BME2010). Hong Kong, 2010, F-4. |
Lee W.C. and Wang M., Incorporation of antibiotics into apatite coatings on NiTi shape memory alloy and their In Vitro release behaviours, Proceedings of the 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011, 1pp. |
Lee W.C. and Wang M., Vancomycin-containing apatite coating on a titanium alloy: Coating fabrication and drug release, Proceedings of the Biomedical Engineering Conference (BME2010). Hong Kong, 2010, C-2. |
Researcher : Leung KK |
List of Research Outputs |
Leung K.K. and Liu C.H., Laboratory measurement of local mass transfer coefficients over idealized two-dimensional urban street canyon models, 15th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics (HKSTAM) 2010-2011, March 11 to 12, 2011, Hong Kong, China.. 2011. |
Leung K.K. and Liu C.H., Laboratory measurements of local mass transfer coefficients over idealized 2D urban street canyon models , European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011 . 2011. |
Researcher : Leung MKH |
Project Title: | Indoor air quality control and mitigation measures for printing plants |
Investigator(s): | Leung MKH |
Department: | Mechanical Engg |
Source(s) of Funding: | Occupational Safety and Health Council - Research Grant Projects |
Start Date: | 03/2003 |
Project Title: | Local exhaust ventilation for protection against nosocomial infection of SARS |
Investigator(s): | Leung MKH |
Department: | Mechanical Engg |
Source(s) of Funding: | VCO SARS Research Fund |
Start Date: | 07/2003 |
Project Title: | Environmental friendly cold water thawing for catering industry |
Investigator(s): | Leung MKH |
Department: | Mechanical Engg |
Source(s) of Funding: | Environmental Research, Technology Demonstration Projects |
Start Date: | 07/2003 |
Project Title: | Novel local exhaust ventilation device for printing industry |
Investigator(s): | Leung MKH |
Department: | Mechanical Engg |
Source(s) of Funding: | The OSH Enhancement Scheme for SMEs |
Start Date: | 10/2004 |
Project Title: | Domestic Single-Phase Heat Pump Water Heater and Air Conditioner |
Investigator(s): | Leung MKH, Leung YC |
Department: | Mechanical Engg |
Source(s) of Funding: | CLP Power Hong Kong Ltd. - General Award |
Start Date: | 08/2007 |
Project Title: | Enhancement of integrated heat pumps for energy savings in hot water and air-conditioning at home |
Investigator(s): | Leung MKH, Leung YC, Liu CH |
Department: | Mechanical Engg |
Source(s) of Funding: | Environment and Conservation Fund |
Start Date: | 06/2008 |
Project Title: | Study of manifold airflow dynamics and NOx formation mechanisms in solar gas turbine for performance enhancement |
Investigator(s): | Leung MKH |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 12/2008 |
Project Title: | TiO2-WO3 nanotube array coated on glass substrate for enhanced photoelectrocatalysis |
Investigator(s): | Leung MKH |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2010 |
List of Research Outputs |
Fu X., Leung Y.C. and Leung M.K.H., Photocatalytic reforming of glucose over La doped Alkali tantalate photocatalysts for H2 production, In: Angelika Brückner , Catalysis Communications . Elsevier, 2010. |
Leung M.K.H., Tsai H.L. and Li G., Fabrication of Nanotube-Array Photocatalyst for Solar Photocatalytic Applications, Proceedings of 18th International Conference on Photochemical Conversion and Storage of Solar Energy (IPS-18). 2010. |
Researcher : Leung YC |
Project Title: | Production of biodiesel fuel using grease trap waste oil |
Investigator(s): | Leung YC |
Department: | Mechanical Engg |
Source(s) of Funding: | Dynamic Progress International Ltd. - General Award |
Start Date: | 08/2005 |
Project Title: | Photocatalytic production of clean and renewable hydrogen fuel |
Investigator(s): | Leung YC, Leung MKH |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2006 |
Project Title: | Hong Kong Biogenic VOCs emission study |
Investigator(s): | Leung YC, Liu CH |
Department: | Mechanical Engg |
Source(s) of Funding: | Environment Protection Department - General Award |
Start Date: | 07/2007 |
Project Title: | Study on the use of wet scrubber for cleaning the exhaust gas from ferry |
Investigator(s): | Leung YC |
Department: | Mechanical Engg |
Source(s) of Funding: | Urban and Environmental Studies - General Award |
Start Date: | 11/2007 |
Project Title: | NOx removal from flue gas by an integrated absorption and biological denitrification process in a bioreactor |
Investigator(s): | Leung YC |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 01/2010 |
Completion Date: | 03/2011 |
Project Title: | The 2010 International Conference of Mechanical Engineering (WCE 2010) Design Optimization of a Cost-Effective Micro-Wind Turbine |
Investigator(s): | Leung YC |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 06/2010 |
Completion Date: | 07/2010 |
Project Title: | Experimental Study of Membraneless Microfluidic Fuel Cells |
Investigator(s): | Leung YC |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 03/2011 |
Project Title: | International Conference on Applied Energy 2011 An innovative micro-wind turbine system for harnessing wind energy in urban environment |
Investigator(s): | Leung YC |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 05/2011 |
Completion Date: | 05/2011 |
List of Research Outputs |
Cheung K.P., Leung Y.C. and Fok W.W.T., Cheung, K. P., Leung, D., Fok, W. Audio visual broadcast of Interview on “ HKU-ICEE, The Initiative on Clean Energy and Environment, http://icee.hku.hk/index/index.html, and Research Project named 香江永綠‧百善永續 - Pearl for the World : A Holistic Sustainable Development Scheme for HKSAR in the coming 50 years and beyond, http://icee.hku.hk/exhibition/pearlOfTheWorldII/index.html”, shown in 九巴路訊通 ROADSHOW Programme, on 4500 buses in HKSAR. 16 times per day, 2 episodes for 4 days, 5 to 8 July, 2010. Broadcast programme produced by RoadShow Department. Kowloon Bus Company Limited. HKSAR. July 2010. , 2010. |
Du Q. and Leung Y.C., 2D numerical simulation of ocean waves, World Renewable Energy Congress 2011. Sweden, CD Rom: 7pp. |
Fok W.W.T., Li V.O.K., Zhong J., Chau K.T., Pong P.W.T. and Leung Y.C., Clean Energy and Environment, HKU Faculty of Engineering. 2011. |
Fu X., Wang X., Leung Y.C., Gu Q., Chen S. and Huang H., Photocatalytic reforming of C3-polyols for H2 production:: Part (I). Role of their OH groups, Applied Catalysis B: Environmental. 2011. |
Fu X., Leung Y.C., Wang X.X., Xue W.W. and Fu X.Z., Photocatalytic reforming of ethanol to H2 and CH4 over ZnSn(OH)6 nanocubes, International Journal of Hydrogen Energy. Elsevier, 2011, 36: 1524-1530. |
Fu X., Leung Y.C. and Leung M.K.H., Photocatalytic reforming of glucose over La doped Alkali tantalate photocatalysts for H2 production, In: Angelika Brückner , Catalysis Communications . Elsevier, 2010. |
Fu X., Wang X., Leung Y.C., Xue W., Ding Z. and Huang H., Photocatalytic reforming of glucose over La doped alkali tantalate photocatalysts for H2 production, Catalysis Communications. 2011. |
Huang H., Ye D.Q. and Leung Y.C., Abatement of toluene in the plasma-driven catalysis: mechanism and reaction kinetics, IEEE Transactions on Plasma Science. UK, IEEE, 2011, 39: 877-882. |
Huang H. and Leung Y.C., Complete elimination of indoor formaldehyde over supported Pt catalysts with extremely low Pt content at ambient temperature, Journal of Catalysis. Elsevier, 2011, 280: 60-67. |
Huang H. and Leung Y.C., Complete oxidation of formaldehyde at room temperature using TiO2 supported metallic Pd nanoparticles, ACS Catalysis. USA, American Chemical Society, 2011, 1: 348-354. |
Huang H., Leung Y.C. and Ye D., Effect of reduction treatment on structural properties of TiO2 supported Pt nanoparticles and their catalytic activity for formaldehyde oxidation, Journal of Materials Chemistry. 2011, 21(26): 9647-9652. |
Huang H. and Leung Y.C., Oxidation of formaldehyde at room temperature with Au/TiO2 catalysts, 15th National Conference on Catalysis. Guangzhou, China, 2010, CD-Rom. |
Huang H., Leung Y.C., Li G., Leung M.K.H. and Fu X., Photocatalytic destruction of air pollutants with vacuum ultraviolet (VUV) irradiation, Catalysis Today. 2011. |
Huang H., Ye D. and Leung Y.C., Plasma-Driven Catalysis Process for Toluene Abatement: Effect of Water Vapor, Plasma Science, IEEE Transactions on. 2011, (99): 1-5. |
Huang H. and Leung Y.C., Purification of gaseous formaldehyde at room temperature using highly efficient nano-scale noble metal catalysts prepared by liquid phase reduction at low temperature, Chinese Petent. 2010. |
Huang H., Ye D.Q. and Leung Y.C., Removal of toluene using UV-irradiated and nonthermal plasma-driven photocatalyst system, Journal of Environmental Engineering. USA, ASCE, 2010, 136: 1231-1236. |
Huang H., Leung Y.C. and Fu X., Vacuum ultraviolet-irradiated photocatalysis--an advanced process for VOCs abatement, 6th International Conference on Environmental Catalysis (ICEC 2010). 2010. |
Leung Y.C., An innovative micro-wind turbine for harnessing wind speed in urban environment, International symposium on Green Technology & Professional Cultiviation. Tainan, Taiwan, 2010, Abstract book. |
Leung Y.C., Leung M.K.H. and Deng Y., An innovative micro-wind turbine system for harnessing wind energy in urban environment, 3rd International Conference on Applied Energy. Perugia, Italy, 2011, CD-Rom: 12pp. |
Leung Y.C., Biodiesel production from GM camelina oil, 3rd Annual World Congress of Industrial Biotechnology i Bio-2010. Dalian, China, Abstract book. |
Leung Y.C., Tsui J.K.Y., Chen F., Yip W.K., Vrijmoed L.L.P. and Liu C.H., Effects of urban vegetations on urban air quality-A review, Landscape Research. London, UK, Taylor & Francis, 2011, 36: 173-188. |
Leung Y.C., Leung M.K.H., Gambarota L. and Deng Y., Micro-wind turbine system in urban environment, Clean Energy and Environment. Hong Kong, The University of Hong Kong, 2011, 73-82. |
Leung Y.C., Yang H.X. and Yan J.Y., Special Issue of the 1st International Conference on Applied Energy, Applied Energy. Elesvier Ltd., 2010, 87: 2861-2951. |
Leung Y.C., Yang H.X. and Yan J.Y., Special Issue of the 1st International Conference on Applied Energy, International Journal of Energy Research. 2011, 35: 1-77. |
Leung Y.C., Worldwide tread of using biofuels for on road vehicles, International Conference on Carbon Reduction. Hong Kong, 2010, Abstract book. |
Li X...-.-.X..., Britter R...E..., Koh T...Y..., Norford L...K..., Entekhabi D... and Leung Y.C., Large-eddy simulation of flow and pollutant transport in urban street canyons with ground heating, Boundary-Layer Meteorology. 2010. |
Li X.X., Liu C.H. and Leung Y.C., Parallel FEM LES with one-equation subgrid-scale model for in-compressible flows, International Journal of Computational Fluid Dynamics. London, UK, Toylor & Francis, 2010, 24: 37-49. |
Memon R.A. and Leung Y.C., Impacts of environmental factors on urban heating, Journal of Environmental Sciences. Elsevier, 2010, 22: 1903-1909. |
Memon R.A., Leung Y.C., Liu C.H. and Leung M.K.H., Urban heat islands & its affection on the cooling & heating phenomena in urban & subarban areas of hong Kong, Theoretical & Applied Climatology. New York, USA, Springer, 2011, 103: 441-450. |
Niu H. and Leung Y.C., A review on the removal of nitrogen oxides from polluted flow by bioreactors , Environmental Reviews. Canada, NRC Research Press, 2010, 18: 175-189. |
Tong Y.O., Leung Y.C. and Liu C.H., A review on ozone evolution and its relationship with boundary layer characteristics in urban environments, Water, Air & Soil Pollution. Netherlands, Kluwer Academic Publishers, 2011, 214: 13-36. |
Wang H., Leung Y.C., Leung M.H.K., Ni M. and Chan G.K.Y., Modeling And Analysis Of An Aluminium-water Electrochemical Generator For Both Electricity And Hydrogen Production, International Journal of Energy Research. USA, Wiley, 2011, 35: 44-51. |
Wang H., Leung Y.C., Leung M.K.H. and Ni M., Modeling of parasitic hydrogen evolution effects in an aluminum-air cell, Energy & Fuels. USA, American Chemical Society, 2010, 24: 3748-3753. |
Wu X. and Leung Y.C., Orthogonal array design for biodiesel production optimization using ultrasonic-assisted transestification of camelina sativa L. crantz oil, World Renewable Energy congress 2011. Sweden, CD-Rom: 8pp. |
Xuan J., Leung M.K.H. and Leung Y.C., Fuel cell without membrane: fluid physics and electrochemistry at the sub-micro-liter scale, 11th National Hydrogen Conference. Hangzhou, China, 2010, Abstract book. |
Xuan J., Leung M.K.H., Leung Y.C., Ni M. and Wang H., Hydrodynamic focusing in on-chip fuel cells, 11th National Hydrogen Conference. Hangzhou, China, 2010, Abstract book. |
Researcher : Li C |
Project Title: | Stability of stochastic switched systems with application to a hover vehicle |
Investigator(s): | Li C, Lam J, Chen MZ |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 01/2011 |
Completion Date: | 10/2011 |
List of Research Outputs |
Su H.S., Li C. and Chen M.Z., Adaptive rendezvous of multiple mobile agents with nonlinear dynamics and preserved network connectivity, The 8th Asian Control Conference. 2011. |
Researcher : Li CH |
List of Research Outputs |
Li C.H., Chik T.K., Ngan A.H.W., Chan C.H., Shum D.K.Y. and Chan B.P., Correlation between compositional and mechanical properties of human mesenchymal stem cell-collagen microspheres during chondrogenic differentiation., Tissue Engineering Part A . 2011, 17(5-6): 777-788. |
Researcher : Li CW |
List of Research Outputs |
Chan B.P., Au-yeung K.L., Kwok C.B., Ho F.C. and Li C.W., Compression-induced alignment of human mesenchymal stem cells in 3D collagen constructs., Global Spine Congress 2011, March 24-26, 2011, Barcelona, Spain. . 2011, 1724. |
Chan B.P., Ho F.C. and Li C.W., Compression-induced alignment of human mesenchymal stem cells in collagen constructs. , International Socity of Stem Cell Research (ISSCR) 9th Annual Meeting, June 15 - 18, 2011, Toronto, Ontario Canada. 2011, 97. |
Li C.W. and Chan B.P., 3D Matrix Adhesions Mediating Mechanostranduction in hMSC-Collagen Constructs. , 2010 IEEE International Conference on Nano/Molecular Medicine and Engineering. Dec 5-9, 2010. Hong Kong, China. 2010, 15. |
Li C.W. and Chan B.P., 3D matrix adhesions mediating mechanotransduction in hMSC collagen constructs., Gordon Conference on Musculoskeletal Biology and Bioengineering. 1-6 Aug 2010, Andover, New Hamshire, MA.. 2010, 28. |
Researcher : Li G |
List of Research Outputs |
Leung M.K.H., Tsai H.L. and Li G., Fabrication of Nanotube-Array Photocatalyst for Solar Photocatalytic Applications, Proceedings of 18th International Conference on Photochemical Conversion and Storage of Solar Energy (IPS-18). 2010. |
Researcher : Li J |
List of Research Outputs |
Ngan A.H.W., Ng K.S. and Li J., Creep deformation of micron to submicron material volumes, Keynote Lecture, The 15th International Symposium on Plasticity and Its Current Applications (Plasticity 2011), January 3-8, 2011 at Puerto-Vallarta, Mexico. 2011. |
Researcher : Li P |
List of Research Outputs |
Feng J., Lam J., Li P. and Shu Z., Decay rate constrained stabilization of positive systems using static output feedback, International Journal of Robust and Nonlinear Control. 2011, 21(1): 44-54. |
Li P. and Lam J., Disturbance analysis of nonlinear differential equation models of genetic SUM regulatory networks, IEEE/ACM Transactions on Computational Biology and Bioinformatics. 2011, 8(1): 253-259. |
Li P., Lam J. and Shu Z., H¥ positive filtering for positive linear discrete-time systems: An augmentation approach, IEEE Transactions on Automatic Control. 2010, 55(10): 2337-2342. |
Researcher : Li S |
List of Research Outputs |
Li S. and Wang M., Folic Acid-Chitosan@Gold nanocomposite for potential diagnostic and therapeutic applications, Proceedings of the 2011 Spring Meeting of the European Materials Research Society. Nice, France, 2011, 1pp. |
Li S. and Wang M., Gold-embedded elliptical chitosan microparticles for medical Imaging and drug delivery applications, Proceedings of the 3rd Chinese-European Symposium on Biomaterials in Regenerative Medicine. Nanjing, China, 2011, 1pp. |
Li S. and Wang M., Gold-embedded polymeric micro- or nanospheres for medical applications, Proceedings of the 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011, 1pp. |
Li S. and Wang M., Multifunctional SERS tags based on Au-Ag bimetallic flower-like nanoparticles, Proceedings of the 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011, 1pp. |
Li S. and Wang M., Novel SERS-active Ag/Au bimetallic nanocomposites for biomedical applications, Proceedings of the 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010, 83. |
Li S. and Wang M., Novel SERS-active Ag/Au bimetallic nanocomposites for biomedical applications, Young Investigator Award at the 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010. |
Li S. and Wang M., One-pot synthesis of folic acid-chitosan protected hold nanoflowers, Proceedings of the 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010, 67. |
Li S. and Wang M., Synthesis and characteristics of bimetallic Core-Shell Ag-Au nanoflowers as SERS-tag, Proceedings of the 2011 Spring Meeting of the European Materials Research Society. Nice, France, 2011, 1pp. |
Researcher : Li Y |
Project Title: | World Renewable Energy Congress VII Analysis and Design of Hybrid Ventilation and Cooling in Buildings |
Investigator(s): | Li Y |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 06/2002 |
Project Title: | Full-scale study of air conditioning systems for SARS wards |
Investigator(s): | Li Y |
Department: | Mechanical Engg |
Source(s) of Funding: | Other Funding Scheme |
Start Date: | 06/2006 |
Project Title: | Healthy Buildings 2006 - Creating a Healthy Indoor Environment for People How Far Respiratory Droplets Move in Indoor Environments? |
Investigator(s): | Li Y |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 06/2006 |
Project Title: | ConnectVent - Ventilation of"connected"indoor environments in controlling airborne disease transmission |
Investigator(s): | Li Y, Leung GM |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 12/2008 |
Completion Date: | 11/2010 |
Project Title: | City Ventilation by Valley Winds |
Investigator(s): | Li Y |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2009 |
Completion Date: | 05/2011 |
Project Title: | Two-box models for the city-scale pollutant and heat transport |
Investigator(s): | Li Y, Yang L |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 03/2010 |
List of Research Outputs |
Chen C., Zhao B., Yang X. and Li Y., Role of two-way airflow owing to temperature difference in severe acute respiratory syndrome transmission: revisiting the largest nosocomial severe acute respiratory syndrome outbreak in Hong Kong. , J. R. Soc. Interface. 2011, 8: 699-710. |
Gong J. and Li Y., Multiple solutions of smoke flow in a building with an opposing wind, International Journal of Ventilation. 2010, 9: 99-114. |
Li Y., Invited speaker. How to improve the CDC recommended ventilation design in isolation rooms? , 2010 IFHE Congress in Tokyo, 21st Congress of International Federation of Hospital Engineering (IFHE), Tokyo Japan, November 17 to 19, 2010. . 2010. |
Li Y., Invited speaker. Modelling infectious diseases from an engineering perspective. , Health Research Symposium 2010:“Improving Health and Recognising Excellence” 11 September 2010, Hong Kong Academy of Medicine, Food and Health Bureau.. 2010. |
Li Y., Plenary speaker. City ventilation for better urban and indoor environment. , 2010 Cross-Strait Conference on Indoor Environment and Health 20-21 August, 2010, Tainan.. 2010. |
Li Y., Plenary speaker. H1N1 and SARS– What Can Ventilation Do? , 2010 Asian Workshop on Indoor Environment And Health and ISIAQ Asian Regional Conference 2010 22 August 2010, Tainan.. 2010. |
Li Y., Plenary speaker. Infection and hospital ventilation. , ASHRAE IAQ 2010, Airborne Infection Control – Ventilation, IAQ & Energy, November 10-12, 2010, Malaysia. 2010. |
Li Y., Technical plenary speaker: H1N1 – What can ventilation do, ASHRAE Winter Conference, Orlando, USA, January, 2010.. 2011. |
Nielsen P.V., Li Y., Buss M. and Winther F.V., Risk of cross-infection in a hospital ward with downward ventilation., Building and Environment. 2010, 45: 2008-2014. |
Qian H. and Li Y., Best Paper Award Indoor Air Journal 2008-2010, Indoor Air Journal. 2011. |
Qian H., Li Y., Sun H., Nielsen P.V., Huang X.H. and Zheng X., Particle removal efficiency of the portable HEPA air cleaner in a simulated hospital ward, Building Simulation. 2010, 3: 215-224. |
Sundell J., Levin H., Nazaroff W.W., Cain W.S., Fisk W.J., Grimsrud D.T., Gyntelberg F., Li Y., Persily A.K., Pickering A.C., Samet J.M., Spengler J.D., Taylor S.T. and Weschler C.J., Ventilation Rates and Health: Multidisciplinary Review of the Scientific Literature, Indoor Air. 2011, 21: 191-204. |
Tang J.W., Noakes C.J., Nielsen P.V., Eames I., Nicolle A. and Li Y., Observing and quantifying airflows in the infection control of aerosol- and airborne-transmitted diseases: an overview of approaches, Journal of Hospital Infection. 2011, 77: 213-222. |
Wong B.X., Lee N., Li Y., Chan P.X., Qiu H., Luo Z., Lai R.X., Ngai K.X., Hui D.X., Choi K.X. and Yu I.X., Possible Role of Aerosol Transmission in a Hospital Outbreak of Influenza, Clinical Infectious Diseases . 2010, 51: 1176-83. |
Yang L. and Li Y., Simple Correction Methods of Infrared Thermography for Building Exterior Surfaces, International Journal of Ventilation. 2010, 9: 261-272. |
Yang L. and Li Y., Thermal conditions and ventilation in an ideal city model of Hong Kong, Energy and Buildings. 2011, 43: 1139-1148. |
Researcher : Lin Y |
Project Title: | Cell motility meditated by adhesion |
Investigator(s): | Lin Y |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 10/2008 |
Completion Date: | 09/2010 |
Project Title: | Investigation of the role of focal adhesion in mechanosensing |
Investigator(s): | Lin Y |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2010 |
Project Title: | 16th US National Congress on Theoretical and Applied Mechanics (USNCTAM) A microscopic formulation of the motion of actin-driven Listeria |
Investigator(s): | Lin Y |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 06/2010 |
Completion Date: | 07/2010 |
Project Title: | A theoretical and experimental investigation of actin-based motility |
Investigator(s): | Lin Y, Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 10/2010 |
Project Title: | The ASME Applied Mechanics and Materials Conference (McMAT-2011) Deformation of anodic aluminum oxide nano-honeycombs under axial compression |
Investigator(s): | Lin Y |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 05/2011 |
Completion Date: | 06/2011 |
Project Title: | Mechanics of bio-filaments |
Investigator(s): | Lin Y |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2011 |
List of Research Outputs |
Bai L. and Lin Y., Transient state model of actin-based motility, Theoretical and Applied Mechanics Letters . 2011, 1: 014002. |
Lin Y., Shenoy V...B., Hu B. and Bai L., A Microscopic Formulation for the Actin-Driven Motion of Listeria in Curved Paths, Biophysical Journal. 2010, 99: 1043-1052. |
Ng K.Y., Lin Y. and Ngan A.H.W., Compression of micron-sized pillars of anodic aluminium oxide nano-honeycomb, Journal of the Mechanics and Physics of solids. Elsevier, 2011, 59: 251-264. |
Researcher : Liu CH |
Project Title: | On the Upward and Sideward Air Pollutant Removal in 3D Urban Street Canopies |
Investigator(s): | Liu CH |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 03/2009 |
Completion Date: | 02/2011 |
Project Title: | LESChem: Large-Eddy Simulation and Wind Tunnel Experiments for the Transport of Chemically Reactive Air Pollutants in Urban Canopies |
Investigator(s): | Liu CH, Lam KM |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2010 |
Project Title: | Wind and Air Pollutant Transport in the Urban Canopy Layer under Unstable Stratification: Development of an Experimental Dataset for Computer Model Validation Exercises |
Investigator(s): | Liu CH |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2010 |
Project Title: | EGU General Assembly 2011 On the air pollutant removal mechanism from 2D urban street canyons |
Investigator(s): | Liu CH |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 04/2011 |
Completion Date: | 04/2011 |
Project Title: | Large-Eddy Simulation for the Transport of Semivolatile Organic Compounds in Urban Areas |
Investigator(s): | Liu CH |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 06/2011 |
List of Research Outputs |
Chan T...L..., Zhou K..., Lin J...Z... and Liu C.H., Vehicular exhaust of gas-to-nanoparticle conversion and concentration distribution in the vehicle wake region, International Journal of Nonlinear Sciences Mathematics. 2010. |
Cheng W.C., Tung R.W.T. and Liu C.H., CFD studies of flow and pollutant dispersion in urban street canyon under different thermal stratifications, First International Conference on Sustainable Urbanization (ICSU 2010), December 15 to 17, 2010, Hong Kong, China. 2010. |
Cheng W.C. and Liu C.H., Large-eddy simulation of flow and pollutant dispersion in urban street canyons under different thermal stratifications, Pacific Rim Applications and Grid Middleware Assembly (PRAGMA) 20, March 2 to 4, 2011, Hong Kong, China. 2011. |
Cheng W.C. and Liu C.H., Large-eddy simulation of flow and pollutant transports in and above two-dimensional idealized street canyons, Boundary-layer meteorology. 2011, 139: 411-437. |
Cheng W.C. and Liu C.H., Large-eddy simulation of turbulent transports in urban street canyons in different thermal stabilities, Journal of Wind Engineering and Industrial Aerodynamics. 2011, 99: 434-442. |
Cheng W.C. and Liu C.H., The flow pattern and pollutant removal behavior in different thermal stratifications by large-eddy simulation, European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011 . 2011. |
Cheung O.P. and Liu C.H., CFD simulations of natural ventilation behaviour in high-rise buildings in regular and staggered arrangements at various spacings, Energy and Buildings. 2011, 43: 1149-1158. |
Cheung O.P. and Liu C.H., Large-eddy simulation of the cross-ventilation behavior in an array of low-rise buildings, 9th American Meteorological Society Urban Conference, Keystone, Colorado, USA, August 2-6, 2010. |
Chung N.H. and Liu C.H., Favorable street canyon aspect ratios for pollutant removal - a large-eddy simulation approach, European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011. |
Chung N.H. and Liu C.H., Large-eddy simulation of flows and pollutant removal in street canyons of different aspect ratios, Pacific Rim Applications and Grid Middleware Assembly (PRAGMA) 20, March 2 to 4, 2011, Hong Kong, China. 2011. |
Chung N.H. and Liu C.H., Numerical investigation of pollutant transfer coefficients in street canyons of different aspect ratios, 9th American Meteorological Society, Symposium on Urban Environment, Keystone, Colorado, USA, August 2-6, 2010. |
Leung K.K. and Liu C.H., Laboratory measurement of local mass transfer coefficients over idealized two-dimensional urban street canyon models, 15th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics (HKSTAM) 2010-2011, March 11 to 12, 2011, Hong Kong, China.. 2011. |
Leung K.K. and Liu C.H., Laboratory measurements of local mass transfer coefficients over idealized 2D urban street canyon models , European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011 . 2011. |
Leung Y.C., Tsui J.K.Y., Chen F., Yip W.K., Vrijmoed L.L.P. and Liu C.H., Effects of urban vegetations on urban air quality-A review, Landscape Research. London, UK, Taylor & Francis, 2011, 36: 173-188. |
Li X.X., Liu C.H. and Leung Y.C., Parallel FEM LES with one-equation subgrid-scale model for in-compressible flows, International Journal of Computational Fluid Dynamics. London, UK, Toylor & Francis, 2010, 24: 37-49. |
Liu C.H., Zhou X. and Chung N.H., Heat dispersion study for transformer bay ventilation improvement for Kennedy Road substation building, 2011. |
Liu C.H., High-Performance Computing and Air Turbulence/Pollution Studies, Pacific Rim Applications and Grid Middleware Assembly (PRAGMA) 20, March 2 to 4, 2011, Hong Kong, China. 2011. |
Liu C.H., Cheng W.C., Chung N.H. and Wong C.C., On the Air Pollutant Removal Mechanism from 2D Urban Street Canyons, European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011. |
Liu C.H., Cheng W.C., Chung N.H. and Wong C.C., On the mechanisms of pollutant removal from urban street canyons: a large-eddy simulation approach, ERCOFTAC Workshop Direct & Large-Eddy Simulation 8, Eindhoven University of Technology, Eindhoven, The Netherlands, July 5-9, 2010 . 2010. |
Liu C.H., Tang K.K.W. and Lai A.C.K., On the particle deposition onto 2D idealized street canyons in cross flow, Liaoning-Hong Kong Joint Symposium 2010, Low Carbon Building Technology: Challenges & Opportunities, Dalian, PRC, July 2-3, 2010. |
Memon R.A., Leung Y.C., Liu C.H. and Leung M.K.H., Urban heat islands & its affection on the cooling & heating phenomena in urban & subarban areas of hong Kong, Theoretical & Applied Climatology. New York, USA, Springer, 2011, 103: 441-450. |
Tong Y.O., Leung Y.C. and Liu C.H., A review on ozone evolution and its relationship with boundary layer characteristics in urban environments, Water, Air & Soil Pollution. Netherlands, Kluwer Academic Publishers, 2011, 214: 13-36. |
Wong C.C. and Liu C.H., Large-Eddy simulation of Pollutant Plume Dispersion over 2D Idealized Street Canyons, Pacific Rim Applications and Grid Middleware Assembly (PRAGMA) 20, March 2 to 4, 2011, Hong Kong, China, 2011 . 2011. |
Wong C.C. and Liu C.H., Pollutant removal, dispersion and entrainment over two-dimensional idealized street canyons: an LES approach, European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011. |
Researcher : Liu F |
Project Title: | Hybrid Tandem and Quantum-Dot Solar Cells |
Investigator(s): | Liu F |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 11/2009 |
Project Title: | the 37th IEEE Photovoltaic Specialist Conference Grain boundary passivation with small polar molecules for photovoltaics |
Investigator(s): | Liu F |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 06/2011 |
Completion Date: | 06/2011 |
List of Research Outputs |
Liu F., HKU Engineering Overseas Visitor Programme Fellowship (EOVPF), HKU. HKU, 2011. |
Liu F., Jiang C...-.S., Guthrey H., Johnston S., Romero M...J. and Al-Jassim M...M., Optical Response Of Grain Boundaries In Upgraded Metallurgical-grade Silicon For Photovoltaics, Solar Energy Materials & Solar Cells. Elsevier, 2011, 95: 2497–2501. |
Liu F., Ranked in the top 25% group in the SETL scores in the second semester of the academic year 2009-2010 (Heat Transfer MECH3011), HKU. 2010. |
Liu F., Solar Photovoltaics: Light to Electricity, Summer Visitors from Washington University in St. Louis, USA. 2011. |
Wang W., Wang L. and Liu F., Grain Boundary Passivation With Small Polar Molecules For Photovoltaics, The 37th IEEE Photovoltaic Specialists Conference. Institute of Electrical and Electronics Engineers, 2011. |
Researcher : Liu G |
List of Research Outputs |
Liu G. and Sze K.Y., Axisymmetric quadrilateral elements for large deformation hyperelastic analysis, International Jourual of Mech. & Matl. in Design. 2010, 6: 197-207. |
Liu G., Zhang Q.H. and Sze K.Y., Spherical-wave based triangular finite element models for axial symmetric Helmholtz problems, Finite Elements in Analysis adn Design. 2011, 47: 342-350. |
Sze K.Y. and Liu G., Hybrid-Trefftz six-node triangular finite element models for Helmholtz problem, Computational Mechanics. 2010, 46: 455-470. |
Researcher : Luo Z |
List of Research Outputs |
Luo Z., City Ventilation by Slope Wind, PhD Thesis. Hong kong, The University of Hong Kong, 2010, 1-194. |
Wong B.X., Lee N., Li Y., Chan P.X., Qiu H., Luo Z., Lai R.X., Ngai K.X., Hui D.X., Choi K.X. and Yu I.X., Possible Role of Aerosol Transmission in a Hospital Outbreak of Influenza, Clinical Infectious Diseases . 2010, 51: 1176-83. |
Researcher : Luo Z |
List of Research Outputs |
Luo Z., City Ventilation by Slope Wind, PhD Thesis. Hong kong, The University of Hong Kong, 2010, 1-194. |
Wong B.X., Lee N., Li Y., Chan P.X., Qiu H., Luo Z., Lai R.X., Ngai K.X., Hui D.X., Choi K.X. and Yu I.X., Possible Role of Aerosol Transmission in a Hospital Outbreak of Influenza, Clinical Infectious Diseases . 2010, 51: 1176-83. |
Researcher : Ma X |
List of Research Outputs |
Huang L., Ma X. and Feng L., Suppression of broadband noise radiated by a low-speed fan in a duct, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA. MELVILLE, NY 11747-4502 USA, ACOUSTICAL SOC AMER AMER INST PHYSICS, 2010, 128: 152-163. |
Researcher : Ma Y |
List of Research Outputs |
Ma Y., Lagrangian Mass Transport Induced by Wave Motions in Biological Systems, PhD Thesis. Hong Kong, The University of Hong Kong, 2010, 1-159. |
Ma Y. and Ng C.O., Lagrangian transport induced by peristaltic pumping in a tube, Fluid Dynamics Research. 2011, 43(1): 015505. |
Ma Y. and Ng C.O., Mass transport due to oscillatory flow through a prestressed viscoelastic tube with a retentive and absorptive wall, European Journal of Mechanics B/Fluids. 2011, 30(2): 195–205. |
Ma Y. and Ng C.O., Mass transport due to oscillatory flow through a prestressed viscoelastic tube, Abstract Book of the 6th International Conference on Diffusion in Solids and Liquids, DSL 2010, Paris, France, July 5–7. 2010, 126. |
Ma Y., Ng C.O. and Chang Y.Y., Wave induced oscillatory and steady flows in the annulus of a catheterized viscoelastic tube, Journal of Hydrodynamics. 2010, 22(5): 605-617. |
Ng C.O. and Ma Y., Lagrangian transport by peristalsis in a closed cavity, Proceedings of the 9th International Conference on Hydrodynamics (ICHD-2010), Shanghai, China, October 11-15. Beijing, China, China Ocean Press, 2010, 138-143. |
Researcher : Mak HMH |
List of Research Outputs |
Mak H.M.H. and Ng C.O., Effect of wall pattern configurations on Stokes flow through a microchannel with superhydrophobic slip, Bulletin of the American Physical Society. The 63rd Annual Meeting of the APS Division of Fluid Dynamics, Long Beach, California, U.S.A., November 21–23. USA, APS, 2010, 55(16): 88. |
Mak H.M.H. and Ng C.O., Study of different wall pattern configuration on Stokes flow through a microchannel with superhydrophobic slip, Proceedings of the 15th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 7th Jiangsu-Hong Kong Forum on Mechanics and Its Application, and the 2nd Symposium on the Development of Mechanics in Macau, Hong Kong and Macau, March 11-12. HKSTAM, 2011, 18. |
Researcher : Malomed BA |
List of Research Outputs |
Yee T.L., Tsang C.H., Malomed B.A. and Chow K.W., Exact solutions for domain walls in coupled complex Ginzburg Landau equations, Journal of the Physical Society of Japan. 2011, 80: 064001-1 to 064001-7. |
Researcher : Ng CO |
Project Title: | Shear Flow over a Superhydrophobic Surface |
Investigator(s): | Ng CO |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 01/2009 |
Completion Date: | 12/2010 |
Project Title: | A homogenization-based model for roughness-induced apparent slip |
Investigator(s): | Ng CO |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2010 |
Project Title: | Mass transport in directional electroosmotic flow by interactive oscillatory electrical forcings |
Investigator(s): | Ng CO |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 03/2010 |
Project Title: | Electrohydrodynamic slip flow through a channel with micropatterned surfaces |
Investigator(s): | Ng CO |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2011 |
List of Research Outputs |
Chu H.C.W. and Ng C.O., Electrohydrodynamic slip flow through a micropatterned channel, Proceedings of the 15th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 7th Jiangsu-Hong Kong Forum on Mechanics and Its Application, and the 2nd Symposium on the Development of Mechanics in Macau, Hong Kong and Macau, March 11-12. HKSTAM, 2011, 8. |
Kairi R.R., Murthy P.V.S.N. and Ng C.O., Effect of viscous dissipation on natural convection in a non-Darcy porous medium saturated with non-Newtonian fluid of variable viscosity, The Open Transport Phenomena Journal. Bentham Open, 2011, 3: 1-8. |
Ma Y. and Ng C.O., Lagrangian transport induced by peristaltic pumping in a tube, Fluid Dynamics Research. 2011, 43(1): 015505. |
Ma Y. and Ng C.O., Mass transport due to oscillatory flow through a prestressed viscoelastic tube with a retentive and absorptive wall, European Journal of Mechanics B/Fluids. 2011, 30(2): 195–205. |
Ma Y. and Ng C.O., Mass transport due to oscillatory flow through a prestressed viscoelastic tube, Abstract Book of the 6th International Conference on Diffusion in Solids and Liquids, DSL 2010, Paris, France, July 5–7. 2010, 126. |
Ma Y., Ng C.O. and Chang Y.Y., Wave induced oscillatory and steady flows in the annulus of a catheterized viscoelastic tube, Journal of Hydrodynamics. 2010, 22(5): 605-617. |
Mak H.M.H. and Ng C.O., Effect of wall pattern configurations on Stokes flow through a microchannel with superhydrophobic slip, Bulletin of the American Physical Society. The 63rd Annual Meeting of the APS Division of Fluid Dynamics, Long Beach, California, U.S.A., November 21–23. USA, APS, 2010, 55(16): 88. |
Mak H.M.H. and Ng C.O., Study of different wall pattern configuration on Stokes flow through a microchannel with superhydrophobic slip, Proceedings of the 15th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, the 7th Jiangsu-Hong Kong Forum on Mechanics and Its Application, and the 2nd Symposium on the Development of Mechanics in Macau, Hong Kong and Macau, March 11-12. HKSTAM, 2011, 18. |
Ng C.O. and Wang C.Y., Apparent slip arising from Stokes shear flow over a bidimensional patterned surface, Proceedings of the 13th Asian Congress of Fluid Mechanics, Dhaka, Bangladesh, December 17-21. Dhaka, Bangladesh, Bangladesh Society of Mechanical Engineers, 2010, 974-977. |
Ng C.O., Associate Editor since August 2009, HKIE Transactions. Hong Kong, HKIE, 2010. |
Ng C.O., Associate Editor since September 2009, Journal of Applied Fluid Mechanics. Iran, Physical Society of Iran, 2010. |
Ng C.O. and Wang C.Y., Darcy–Brinkman flow through a corrugated channel, Transport in Porous Media. 2010, 85(2): 605-618. |
Ng C.O., Editorial Advisory Board Member, since December 2007, The Open Ocean Engineering Journal. Bentham Science Publishers, 2010. |
Ng C.O., Editorial Advisory Board Member, since October 2007, The Open Oceanography Journal. Bentham Science Publishers, 2010. |
Ng C.O., First Class Prize of Natural Science Award 2010, 自然科學獎一等獎, State Ministry of Education, China. 中國教育部, 2011. |
Ng C.O., Homogenization Technique Applied to Problems of Taylor Dispersion, Invited Lecture at the Disaster Prevention & Water Environment Research Center, National Chiao Tung University, Taiwan, August 5. 2010. |
Ng C.O., How does wall slippage affect hydrodynamic dispersion?, Microfluidics and Nanofluidics. Heidelberg, Germany, Springer Verlag, 2011, 10(1): 47–57. |
Ng C.O., ISST Journal of Mathematics & Computer Sciences, Editorial Board Member, since November 2009. India, Intellectuals Society for Socio-Techno Welfare, 2010. |
Ng C.O., ISST Journal of Mechanical Engineering, Editorial Board Member, since November 2009. India, Intellectuals Society for Socio-Techno Welfare, 2010. |
Ng C.O., Invited (international) Editorial Board Committee Member, since August 2003, Journal of Hydrodynamics. Shanghai, China, Publishing House for Journal of Hydrodynamics, 2010. |
Ng C.O. and Ma Y., Lagrangian transport by peristalsis in a closed cavity, Proceedings of the 9th International Conference on Hydrodynamics (ICHD-2010), Shanghai, China, October 11-15. Beijing, China, China Ocean Press, 2010, 138-143. |
Ng C.O., Member of the Editorial Board, since July 2006, Engineering Applications of Computational Fluid Mechanics. Hong Kong, The Hong Kong Polytechnic University, 2010. |
Ng C.O., Chu H.C.W. and Wang C.Y., On the effects of liquid-gas interfacial shear on slip flow through a parallel-plate channel with superhydrophobic grooved walls, Physics of Fluids. 2010, 22(10): 102002. |
Ng C.O. and Wang C.Y., Oscillatory flow through a channel with stick-slip walls: Complex Navier's slip length, Journal of Fluids Engineering. USA, ASME, 2011, 133(1): 014502. |
Ng C.O. and Wang C.Y., Oscillatory flow through a channel with stick–slip walls: Complex Navier’s slip length, In: Jiachun Li, Song Fu, Proceedings of the Sixth International Conference on Fluid Mechanics, Guangzhou, China, June 30–July 3. AIP, 2011, 606–609. |
Ng C.O. and Wang C.Y., Oscillatory flow through a channel with stick–slip walls: Complex Navier’s slip length, Session Keynote Lecture at the Sixth International Conference on Fluid Mechanics (ICFM6), Guangzhou, China, July 2. 2011. |
Ng C.O. and Wang C.Y., Slip Flow Over a Superhydrophobic Surface Patterned with Gratings and Grooves, Invited Lecture at the Hydrotech Research Institute, National Taiwan University, Taiwan, August 6. 2010. |
Ng C.O. and Wang C.Y., Stokes flow through a periodically grooved tube, Journal of Fluids Engineering. ASME, 2010, 132(10): 101204. |
Rudraiah N., Ranganna G. and Ng C.O., Effects of electric field, couple stress and permeability of poorly conducting polluted fluid through composite materials, Proceedings of the 7th Asian-Australasian Conference on Composite Materials, Taipei, Taiwan, November 15–18, CD-ROM. 2010, 4pp. |
Rudraiah N., Devaraju N. and Ng C.O., Electrohydrodynamic dispersion of deformable aerosols in the presence of an electric field and chemical reaction using Taylor dispersion model, Journal of Hydrodynamics. 2011, 23(2): 247-257. |
Rudraiah N., Shankar B.M. and Ng C.O., Electrohydrodynamic stability of couple stress fluid flow in a channel occupied by a porous medium, Special Topics & Reviews in Porous Media. Begell House, 2011, 2(1): 11-22. |
Wang J., Huang S.L., Luo Y. and Ng C.O., Comparison of horizontal and wavy subsurface flow constructed wetlands by numerical modeling, Proceedings of the 9th International Conference on Hydroinformatics, HIC 2010, Tianjin, China, September 7-11. 2010, 230-238. |
Wang J., Huang S.L., Luo Y. and Ng C.O., Development and convergence criteria evaluation of a water flow model in variably saturated porous media, Proceedings of the 9th International Conference on Hydroinformatics, HIC 2010, Tianjin, China, September 7-11. 2010, 222-229. |
Wang J., Huang S.L., He C.D. and Ng C.O., Numerical analysis of the performance of horizontal and wavy subsurface flow constructed wetlands, Journal of Hydrodynamics. 2011, 23(3): 339–347. |
Zhang D.H., Yip T.L. and Ng C.O., Tsunami Warnings: Predicting Arrivals, In: Justin A. Daniels, Advances in Environmental Research, Volume 7. Nova Science Pub Inc, 2011, 173-194. |
Researcher : Ng KS |
List of Research Outputs |
Ngan A.H.W., Ng K.S. and Li J., Creep deformation of micron to submicron material volumes, Keynote Lecture, The 15th International Symposium on Plasticity and Its Current Applications (Plasticity 2011), January 3-8, 2011 at Puerto-Vallarta, Mexico. 2011. |
Researcher : Ng KY |
List of Research Outputs |
Ng K.Y., Cheng C. and Ngan A.H.W., "Mechanics of nanohoneycombs", invited lecture, Gordon Research Conference on Thin Film and Small-scale Mechanical Behaviour, July 25-30, 2010 at Colby College, Waterville, Maine, USA. 2010. |
Ng K.Y., Lin Y. and Ngan A.H.W., Compression of micron-sized pillars of anodic aluminium oxide nano-honeycomb, Journal of the Mechanics and Physics of solids. Elsevier, 2011, 59: 251-264. |
Researcher : Ngan AHW |
Project Title: | Stress-exponent measurement of nano-grained thin-films by nanoindentation |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 09/2002 |
Project Title: | Statistical distribution, size and time dependence of initial yield strength in submicron crystals |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 09/2006 |
Project Title: | Outstanding Researcher Award 2006-2007 |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | Outstanding Researcher Award |
Start Date: | 11/2007 |
Project Title: | Nano-biotechnology |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding for Strategic Research Theme |
Start Date: | 07/2008 |
Project Title: | Stochastic nature of plastic deformation of small materials |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 09/2008 |
Completion Date: | 02/2011 |
Project Title: | Microstructure and Mechanical properties of metal nano-wires |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | Travel Grants for NSFC/RGC JRS |
Start Date: | 12/2008 |
Project Title: | Bio-nanomechanics Laboratory |
Investigator(s): | Ngan AHW, Luk KDK, Lu WW, Wang M, Chan BP, Tang B |
Department: | Mechanical Engg |
Source(s) of Funding: | UGC One-off Special Equipment Grant Scheme |
Start Date: | 12/2008 |
Project Title: | Mechanical Behaviour of Composite Micro-Pillars |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 04/2009 |
Completion Date: | 03/2011 |
Project Title: | Mechanical properties of submicron-sized materials and bio-tissues |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | Croucher Senior Research Fellowships in Natural Sciences, Technology and Medicine |
Start Date: | 09/2009 |
Project Title: | Gordon Research Conference on "Thin Film & Small Scale Mechanical Behavior" Mechanical Properties of Nano-honeycomb |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 07/2010 |
Completion Date: | 07/2010 |
Project Title: | Ultra-high Strength Micro-sized Materials |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 10/2010 |
Project Title: | Acoustoplasticity: theory and experiment |
Investigator(s): | Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 04/2011 |
List of Research Outputs |
Chen X. and Ngan A.H.W., Specimen size and grain size effects on tensile strength of Ag microwires, Scripta Materialia. Elsevier, 2011, 64: 717-720. |
Li C.H., Chik T.K., Ngan A.H.W., Chan C.H., Shum D.K.Y. and Chan B.P., Correlation between compositional and mechanical properties of human mesenchymal stem cell-collagen microspheres during chondrogenic differentiation., Tissue Engineering Part A . 2011, 17(5-6): 777-788. |
Ng K.Y., Cheng C. and Ngan A.H.W., "Mechanics of nanohoneycombs", invited lecture, Gordon Research Conference on Thin Film and Small-scale Mechanical Behaviour, July 25-30, 2010 at Colby College, Waterville, Maine, USA. 2010. |
Ng K.Y., Lin Y. and Ngan A.H.W., Compression of micron-sized pillars of anodic aluminium oxide nano-honeycomb, Journal of the Mechanics and Physics of solids. Elsevier, 2011, 59: 251-264. |
Ngan A.H.W., Achieving Ultra-high Strength and Strain-hardening Rate by Trapping Dislocations in Small Material Volumes, invited talk at symposium “Size Effects in Mechanical Behavior”, 140th TMS Annual Meeting, San Diego, CA, Feb 27-March 3, 2011.. 2011. |
Ngan A.H.W., Ng K.S. and Li J., Creep deformation of micron to submicron material volumes, Keynote Lecture, The 15th International Symposium on Plasticity and Its Current Applications (Plasticity 2011), January 3-8, 2011 at Puerto-Vallarta, Mexico. 2011. |
Ngan A.H.W., Statistical plastic events in small material volumes, invited talk, Micromechanics Meeting – Materials for Fusion and Fission Power, Sept. 19-22, 2010 at Oxford University, U.K.. 2010. |
Ngan A.H.W., Stochastic and jerky nature of plasticity in small material volumes, invited talk, International Workshop on Structural Integrity & Materials – Behaviour at Micro and Nano Scales (SMMN 2010), Oct. 25-27, 2010, Brisbane, Australia. 2010. |
Ngan A.H.W., Transition from Deterministic to Stochastic Deformation, invited talk at symposium “Advances in Mechanics of One-Dimensional Micro/Nano Materials”, 140th TMS Annual Meeting, San Diego, CA, Feb 27-March 3, 2011.. 2011. |
Siu K.W., Ngan A.H.W. and Jones I.P., New insight on acoustoplasticity - ultrasonic irradiation enhances subgrain formation during deformation, Internatioanl Journal of Plasticity. Elsevier, 2011, 27: 788-800. |
Tang B. and Ngan A.H.W., Nanoindentation using an atomic force microscope, Philosophical Magazine. Taylor and Francis, 2011, 91(7-9): 1329-1338. |
Researcher : Niu H |
List of Research Outputs |
Niu H. and Leung Y.C., A review on the removal of nitrogen oxides from polluted flow by bioreactors , Environmental Reviews. Canada, NRC Research Press, 2010, 18: 175-189. |
Researcher : Poon HCC |
List of Research Outputs |
Poon H.C.C., Numerical Simulation of Turbulent Flow and Microclimate within and above Vegetation Canopy, MPhil Thesis. Hong Kong, The University of Hong Kong, 2010, 1-179. |
Researcher : Qian H |
List of Research Outputs |
Qian H. and Li Y., Best Paper Award Indoor Air Journal 2008-2010, Indoor Air Journal. 2011. |
Researcher : Rudraiah N |
List of Research Outputs |
Rudraiah N., Ranganna G. and Ng C.O., Effects of electric field, couple stress and permeability of poorly conducting polluted fluid through composite materials, Proceedings of the 7th Asian-Australasian Conference on Composite Materials, Taipei, Taiwan, November 15–18, CD-ROM. 2010, 4pp. |
Rudraiah N., Shankar B.M. and Ng C.O., Electrohydrodynamic stability of couple stress fluid flow in a channel occupied by a porous medium, Special Topics & Reviews in Porous Media. Begell House, 2011, 2(1): 11-22. |
Researcher : Shabayek AAE |
Project Title: | 11th International Association of Management of Technology Conference (IAMOT) Government's Support for Small & Medium Enterprises (SMEs) for Prospering Hong Kong Economy: Impacts of Globalization & China Joining WTO |
Investigator(s): | Shabayek AAE |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 03/2002 |
Researcher : Shao L |
List of Research Outputs |
Shao L., Flutter of a Cantilevered Plate, MPhil Thesis. Hong Kong, The University of Hong Kong, 2010, 1-82. |
Researcher : Shi Y |
List of Research Outputs |
Shi Y., Soh A.K. and Weng G.J., Anisotropic mechanism on distinct transition modes of tip-activated multipolorizaion switching in epitaxial BiFeO(3) films, Journal of Applied Physics. 2011, 109(2): 024102. |
Shi Y. and Soh A.K., Correlation between coercive tip bias and domain wall width evolution, and tunable mechanism transition in ferroelectric films, EPL. 2010, 92(5): 57006. |
Researcher : Shu J |
Project Title: | The Fourth International Conference on Hydrodynamics Impact of Breaking Wave on a Wall |
Investigator(s): | Shu J |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 09/2000 |
Project Title: | International Conference on Applied Mathematics The Additivity of the Soliton Equation and Exact N-Envelope-Soliton Solutions of the Hirota Equation |
Investigator(s): | Shu J |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 09/2000 |
Researcher : Shu Z |
List of Research Outputs |
Du B., Lam J. and Shu Z., Stabilization for state/Input delay systems via static and integral output feedback, Automatica. 2010, 46(12): 2000-2007. |
Feng J., Lam J., Li P. and Shu Z., Decay rate constrained stabilization of positive systems using static output feedback, International Journal of Robust and Nonlinear Control. 2011, 21(1): 44-54. |
Li P., Lam J. and Shu Z., H¥ positive filtering for positive linear discrete-time systems: An augmentation approach, IEEE Transactions on Automatic Control. 2010, 55(10): 2337-2342. |
Researcher : Shum HC |
Project Title: | Synthesis and assembly of small soft particles in capillary microfluidics |
Investigator(s): | Shum HC |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 01/2011 |
Project Title: | The Ninth International Conference on Nanochannels, Microchannels, and Minichannels Tunable morphology of monodisperse polymer particles with microfluidics |
Investigator(s): | Shum HC |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 06/2011 |
Completion Date: | 06/2011 |
List of Research Outputs |
Adams L., Zhao Y.J., Shum H.C. and Weitz D.A., Control Over The Number, Size, And Type Of Inner Drops Inside A Double Emulsion, March Meeting Of The American Physical Society. 2011. |
Datta S.S., Shum H.C. and Weitz D.A., Controlled Buckling and Crumpling of Nanoparticle-Coated Droplets, Langmuir. 2010, 26(24): 18612-18616. |
Kanai T., Lee D., Shum H.C., Shah R.K. and Weitz D.A., Fabrication Of Microcapsules With Gel-immobilized Colloidal Crystal Shells In Microfluidic Devices, Spring Meeting Of The Materials Research Society 2011. |
Kanai T., Lee D., Shum H.C., Shah R.K. and Weitz D.A., Gel-Immobilized Colloidal Crystal Shell with Enhanced Thermal Sensitivity at Photonic Wavelengths, Advanced Materials. 2010, 22(44): 4998-+. |
Shum H.C., Colloido-polymersomes: capsules consisting of a composite layer of particles and polymer, Technical Proceedings of the 2011 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2011. 3: 147-150. |
Shum H.C., Sauret A., Fernandez-Nieves A., Stone H.A. and Weitz D.A., Corrugated interfaces in multiphase core-annular flow, Physics of Fluids. 2010, 22(8). |
Shum H.C., Santanach-Carreras E., Kim J., Ehrlicher A., Bibette J. and Weitz D.A., Dewetting-Induced Membrane Formation by Adhesion of Amphiphile-Laden Interfaces, Journal of the American Chemical Society. 2011, 133(12): 4420-4426. |
Shum H.C., Droplet Microfluidics- Emerging Platform For Formulation, BASF China, Pudong. 2011. |
Shum H.C., Droplet Microfluidics- Emerging Platform For Formulation, School of Chemical and Material Engineering, Jiangnan University. 2011. |
Shum H.C., Droplet Microfluidics- Opportunities For Biomaterials, Tissue Engineering And Cell Studies, Khademhosseini Group- Harvard Medical School & Brigham And Women's Hospital. 2011. |
Shum H.C., Fabricating Functional Material Structures With Droplet Microfluidics, Advanced Seminars In Orthopaedic Research, Hku Medical School. 2011. |
Shum H.C., Fabricating Functional Material Structures With Droplet Microfluidics, Physics Colloquium Of Hong Kong University Of Science And Technology (hkust). 2011. |
Shum H.C., Varnell J. and Weitz D.A., Water-based Droplet Microfluidics, Advances In Microfluidics And Nanofluidics & Asian-pacific International Symposium On Lab On Chip. 2011. |
Studart A.R., Studer J., Xu L., Yoon K., Shum H.C. and Weitz D.A., Hierarchical Porous Materials Made by Drying Complex Suspensions, Langmuir. 2011, 27(3): 955-964. |
Sun B.J., Shum H.C., Holtze C. and Weitz D.A., Microfluidic Melt Emulsification for Encapsulation and Release of Actives, Acs Applied Materials & Interfaces. 2010, 2(12): 3411-3416. |
Thiele J., Abate A.R., Shum H.C., Bachtler S., Foerster S. and Weitz D.A., Fabrication of Polymersomes using Double-Emulsion Templates in Glass-Coated Stamped Microfluidic Devices, Small. 2010, 6(16): 1723-1727. |
Wang B.G., Weitz D.A. and Shum H.C., Tunable Morphology of Monodisperse Polymer Particles with Microfluidics, ASME 9th International Conference on Nanochannels, Microchannels & Minichannels.. 2011. |
Zhao Y., Shum H.C., Chen H., Adams L.L.A., Gu Z. and Weitz D.A., Microfluidic Generation of Multifunctional Quantum Dot Barcode Particles, Journal of the American Chemical Society. 2011, 133(23): 8790-8793. |
Researcher : Siu KW |
List of Research Outputs |
Siu K.W., Ngan A.H.W. and Jones I.P., New insight on acoustoplasticity - ultrasonic irradiation enhances subgrain formation during deformation, Internatioanl Journal of Plasticity. Elsevier, 2011, 27: 788-800. |
Researcher : Soh AK |
Project Title: | International Conference on Materials for Advanced Technologies 2007 Phase field simulation of surface roughening of heteroepitaxial films |
Investigator(s): | Soh AK |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 07/2007 |
Project Title: | Development and application of a novel mesoscopic theory for the study of semiconducting ferroelectrics with crystal defects |
Investigator(s): | Soh AK |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2008 |
Completion Date: | 09/2010 |
Project Title: | Mesoscopic study of magnetoelectroelastic coupling in multiferroic materials |
Investigator(s): | Soh AK |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2009 |
Completion Date: | 06/2011 |
Project Title: | Design and analysis of environmental friendly lead-free ferroelectric ceramics |
Investigator(s): | Soh AK |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 05/2009 |
Completion Date: | 04/2011 |
Project Title: | Development of nanoscale electro-mechanical coupling theory and functional design of nanoferroelectrics |
Investigator(s): | Soh AK |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 03/2010 |
Project Title: | HKU Overseas Fellowship Awards 2010-11 |
Investigator(s): | Soh AK |
Department: | Mechanical Engg |
Source(s) of Funding: | HKU Overseas Fellowship Awards |
Start Date: | 08/2010 |
Project Title: | 3rd International Congress on Ceramics (ICC3) Numerical Simulations of Ferroelectric Ceramic materials with Defects |
Investigator(s): | Soh AK |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 11/2010 |
Completion Date: | 11/2010 |
Project Title: | Behavior of constrained ionic polymer gels with coupled large deformation and diffusion |
Investigator(s): | Soh AK |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 03/2011 |
List of Research Outputs |
Chen H., Hong L. and Soh A.K., Effects of film thickness and mismatch strains on magnetoelectric coupling in vertical heteroepitaxial nanocomposite thin films, Journal of Applied Physics. 2011, 109(9): 094102. |
Hong L. and Soh A.K., Control of domain states in individual PbTiO(3) nanoparticles by prescribed strains, Key Engineering Materials. 2011, 465: 203-206. |
Hong L. and Soh A.K., Unique vortex and stripe domain structures in PbTiO(3) epitaxial nanodots, Mechanics of Materials. 2011, 43(6): 342-347. |
Peng Z.L., Chen S.H. and Soh A.K., Peeling behavior of a bio-inspired nano-film on a substrate, International Journal of Solids and Structures. 2010, 47(14-15): 1952-1960. |
Shi Y., Soh A.K. and Weng G.J., Anisotropic mechanism on distinct transition modes of tip-activated multipolorizaion switching in epitaxial BiFeO(3) films, Journal of Applied Physics. 2011, 109(2): 024102. |
Shi Y. and Soh A.K., Correlation between coercive tip bias and domain wall width evolution, and tunable mechanism transition in ferroelectric films, EPL. 2010, 92(5): 57006. |
Tang M. and Soh A.K., Simulation of a Bio-adhesion System with Viscoelasticity, Key Engineering Materials. 2011, 462-463: 780-784. |
Wang J., Soh A.K. and Xiao P., Molecular-dynamics investigation on polarization retention of barium titanate nanofilm arising from ordered oxygen vacancy, EPL. 2010, 92(1): 17006. |
Xie S.F., Chen S.D. and Soh A.K., The effect of atomic vacancies and grain boundaries on mechanical properties of GaN nanowires, Chinese Physics Letters. 2011, 28(6): 066201. |
Zhao X. and Soh A.K., Phase field simulation of ferroelectrics with cracks, Key Engineering Materials. 2011, 462-463: 710-715. |
Researcher : Sun H |
List of Research Outputs |
Qian H., Li Y., Sun H., Nielsen P.V., Huang X.H. and Zheng X., Particle removal efficiency of the portable HEPA air cleaner in a simulated hospital ward, Building Simulation. 2010, 3: 215-224. |
Researcher : Sun T |
List of Research Outputs |
Sun T. and Wang M., A comparative study on titania layers formed on Ti, Ti-6Al-4V and NiTi shape memory alloy through a low temperature oxidation process, Surface and Coatings Technology. Elsevier, 2010, 205: 92-101. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Characteristics and In Vitro biological assessment of (Ti, O, N)/Ti composite coating formed on NiTi shape memory alloy, 5th International Conference on Technological Advances of Thin Film & Surface Coatings. Harbin, China, 2010. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Characteristics and In Vitro biological assessment of (Ti, O, N)/Ti composite coating formed on NiTi shape memory alloy, Proceedings of the 5th International Conference on Technological Advances of Thin Film & Surface Coatings. Harbin, China, 2010, 1pp. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Characteristics and in vitro biological assessment of (Ti, O, N)/Ti composite coating formed on NiTi shape memory alloy, Thin Solid Films. 2011, 519: 4623-4628. |
Sun T., Wang L.P. and Wang M., Characteristics and mechanical properties of a (Ti, O, N)/Ti composite coating fabricated on NiTi shape memory alloy via PIIID, Materials Letters. Elsevier, 2010, 64: 1769-1771. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Fabrication, nanomechanical properties and In Vitro evaluation of (Ti, O)/Ti composite coating on NiTi shape memory alloy, IFMBE Proceedings. Germany, Springer, 2010, 31: 1222-1225. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti Coatings on NiTi Shape Memory Alloy for Medical Applications, The 2nd Advanced Welding & Joining Technology Conference and International Forum on Recent Advances in Welding Science and Technology (AWJTC-FAWST), Harbin, China. 2011. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti coatings on NiTi shape memory alloy for medical applications, Best Paper Award at the 2nd Advanced Welding & Joining Technology Conference (AWJTC). Harbin, China, 2011. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti coatings on NiTi shape memory alloy for medical applications, Proceedings of the 2nd Advanced Welding & Joining Technology Conference (AWJTC). Harbin, China, 2011, 268-276. |
Sun T., Surface Modification of Titanium Metals for Medical Applications, PhD Thesis. Hong Kong, The University of Hong Kong, 2010, 1-347. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., The Best Paper Award, for "PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti Coatings on NiTi Shape Memory Alloy for Medical Applications", The 2nd Advanced Welding & Joining Technology Conference and International Forum on Recent Advances in Welding Science and Technology. 2011. |
Sun T., Wang L.P. and Wang M., “(Ti, O)/Ti and (Ti, O, N)/Ti composite coatings fabricated via PIIID for the medical application of NiTi shape memory alloy, Journal of Biomedical Materials Research Part B Applied Biomaterials. USA, Wiley, 2011, 96B: 249-260. |
Researcher : Sze KY |
Project Title: | Computational methods for meso-electromechanical analysis of ferroelectrics and ferroelectric devices |
Investigator(s): | Sze KY |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2001 |
Project Title: | Development of wave-based finite element families for plane, axial symmetric and three-dimensional Helmholtz problems. |
Investigator(s): | Sze KY |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 11/2008 |
Completion Date: | 04/2011 |
Project Title: | Development of efficient rotation-free triangles for shell and drape analyses. |
Investigator(s): | Sze KY |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2010 |
Project Title: | International Conference on Computational & Experimental Engineering and Sciences 2011 (ICCES'11) Rotation-Free Beam and Shell Models for Geometric Nonlinear Analysis of Thin Shells |
Investigator(s): | Sze KY |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 04/2011 |
Completion Date: | 04/2011 |
List of Research Outputs |
Fan H., Xie X.M. and Sze K.Y., Effective modulus of polycrystalline aggregates in different geometrical configurations, Materials Science & Engineering A. 2010, 527: 5008–5017. |
Liu G. and Sze K.Y., Axisymmetric quadrilateral elements for large deformation hyperelastic analysis, International Jourual of Mech. & Matl. in Design. 2010, 6: 197-207. |
Liu G., Zhang Q.H. and Sze K.Y., Spherical-wave based triangular finite element models for axial symmetric Helmholtz problems, Finite Elements in Analysis adn Design. 2011, 47: 342-350. |
Lo S.H., Wu Z. and Sze K.Y., C(0)-type global-local theory with non-zero normal strain for the analysis of thick multilayer composite plates , COMPUTATIONAL MECHANICS . USA, Springer, 2011, 47: 479-491. |
Lo S.H. and Sze K.Y., Hexahedral connection element based on hybrid-stress theory for solid structures , Materials Science and Engineering. Australia, IOP Publishing, 2010, 10: Article Number: 012232. |
Sze K.Y. and Zhou Y., Finite element analysis of aircraft cabin seat undergoing high deceleration, Hong Kong Productivity Council. 2010. |
Sze K.Y. and Lo S.H., Hexahedral connection element based on hybrid-stress theory for solid structures , 9TH WORLD CONGRESS ON COMPUTATIONAL MECHANICS AND 4TH ASIAN PACIFIC CONGRESS ON COMPUTATIONAL MECHANICS. Singapore, IOP PUBLISHING LTD, 2010. |
Sze K.Y. and Liu G., Hybrid-Trefftz six-node triangular finite element models for Helmholtz problem, Computational Mechanics. 2010, 46: 455-470. |
Sze K.Y. and Zhou Y., Session Keynote: Rotation-Free Beam and Shell Models for Geometric Nonlinear Analysis of Thin Shells, International Conference on Computational & Experimental Engineering & Sciences. Nanjing, China. 18-20 April, 2011 . 2011. |
Sze K.Y. and Wu D., Transition finite element families for adaptive analysis of axisymmetric elasticity problems, Finite Elements in Analysis and Design. 2011, 47: 360-372. |
Yeung K.W.K., Chan K.Y., Leung Y.L., Tam V., Lu W.W., Sze K.Y. and Cheung K.M.C., Effects of detergents on bovine disc decullularization for the generation of natural disc scaffolds for intervertebral disc tissue engineering, Seventh SICOT/SIROT Annual International Conference, Gothenburg, Sweden, August 31- September 3, 2010. |
Researcher : Tan ST |
Project Title: | Heterogeneous solid modeling using materially defined geometric entities |
Investigator(s): | Tan ST |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 04/2005 |
Project Title: | Voice enabled CAD modeling |
Investigator(s): | Tan ST |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2009 |
Completion Date: | 12/2010 |
Project Title: | Adaptive mesh generation for the finite element analysis of heterogeneous objects |
Investigator(s): | Tan ST |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2010 |
Project Title: | Visiting Research Professors Scheme 2010-11 |
Investigator(s): | Tan ST |
Department: | Mechanical Engg |
Source(s) of Funding: | Visiting Research Professors Scheme |
Start Date: | 09/2010 |
List of Research Outputs |
Chiu W.K., Kou X. and Tan S.T., Adaptive meshing of 2D heterogeneous objects using materials quadtree, Computer-aided Design & Applications. 2011, 1-12. |
Kou X. and Tan S.T., A Simple and Effective Geometric Representation for Irregular Porous Structure Modeling, Computer-Aided Design. Elsevier, 2010, 42: 930-941. |
Kou X., Tan S.T. and Lipson H., A data-driven process for estimating nonlinear materials models , Applied Mechanics and Materials. Switzerland, Trans Tech Publications, 2011, 50-51: 599-604. |
Researcher : Tang B |
Project Title: | Nanomechanical characterization of bone using AFM nanoindentation |
Investigator(s): | Tang B, Lu WW |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 12/2008 |
Completion Date: | 06/2011 |
Project Title: | Mechanical nanolithography and characterization of polymer under elevated temperatures using atomic force microscope |
Investigator(s): | Tang B |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 03/2009 |
Completion Date: | 02/2011 |
Project Title: | Investigation of Biomechanics and Biophysics of White Blood Cell using Optical Tweezer |
Investigator(s): | Tang B, Ngan AHW |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 03/2010 |
Project Title: | 6th World Congress on Biomechanics Using High-power Optical tweezers to Investigate Hepatitis B Surface Antigen-antibody Protein Interactions |
Investigator(s): | Tang B |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 08/2010 |
Completion Date: | 08/2010 |
List of Research Outputs |
Tang B. and Ngan A.H.W., Nanoindentation using an atomic force microscope, Philosophical Magazine. Taylor and Francis, 2011, 91(7-9): 1329-1338. |
Wen C., Pan H., Tang B., Lu W.W., Yan C.H. and Chiu P.K.Y., Uncoupling of Bone Resorption with Formation in Osteoarthritis Subchondral Bone in Postmenopausal Women - Associated with Osteocyte Dysfunction?, The 4th International Congress of Chinese Orthopaedic Association, Xiamen, PR China, November 19th2nd. 2010. |
Wu C.B.B., Tang B., Wen C., Lu W.W., Yan C.H. and Chiu P.K.Y., Individual collagen fibrils of osteoarthritic cartilage are mechanically inferior outside in., Bone. 2010, 47(Supplement 3): S443. |
Researcher : Tang M |
List of Research Outputs |
Tang M., Investigation of Reversible Adhesion Mechanism in Gecko's Foot Hair, MPhil Thesis. Hong Kong, The University of Hong Kong, 2010, 1-61. |
Tang M. and Soh A.K., Simulation of a Bio-adhesion System with Viscoelasticity, Key Engineering Materials. 2011, 462-463: 780-784. |
Researcher : Tong HW |
Project Title: | An investigation into coaxial electrospinning for forming biomolecule delivering tissue engineering scaffolds |
Investigator(s): | Tong HW, Wang M |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 02/2011 |
List of Research Outputs |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Characteristics and In Vitro biological assessment of (Ti, O, N)/Ti composite coating formed on NiTi shape memory alloy, 5th International Conference on Technological Advances of Thin Film & Surface Coatings. Harbin, China, 2010. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Characteristics and In Vitro biological assessment of (Ti, O, N)/Ti composite coating formed on NiTi shape memory alloy, Proceedings of the 5th International Conference on Technological Advances of Thin Film & Surface Coatings. Harbin, China, 2010, 1pp. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Characteristics and in vitro biological assessment of (Ti, O, N)/Ti composite coating formed on NiTi shape memory alloy, Thin Solid Films. 2011, 519: 4623-4628. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Fabrication, nanomechanical properties and In Vitro evaluation of (Ti, O)/Ti composite coating on NiTi shape memory alloy, IFMBE Proceedings. Germany, Springer, 2010, 31: 1222-1225. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti Coatings on NiTi Shape Memory Alloy for Medical Applications, The 2nd Advanced Welding & Joining Technology Conference and International Forum on Recent Advances in Welding Science and Technology (AWJTC-FAWST), Harbin, China. 2011. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti coatings on NiTi shape memory alloy for medical applications, Best Paper Award at the 2nd Advanced Welding & Joining Technology Conference (AWJTC). Harbin, China, 2011. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti coatings on NiTi shape memory alloy for medical applications, Proceedings of the 2nd Advanced Welding & Joining Technology Conference (AWJTC). Harbin, China, 2011, 268-276. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., The Best Paper Award, for "PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti Coatings on NiTi Shape Memory Alloy for Medical Applications", The 2nd Advanced Welding & Joining Technology Conference and International Forum on Recent Advances in Welding Science and Technology. 2011. |
Tong H.W. and Wang M., An investigation into negative voltage electrospinning of PLLA and PLGA fibrous tissue engineering scaffolds, Proceedings of the Biomedical Engineering Conference BME2010, Hong Kong. 2010, Sess. C: C-1. |
Tong H.W. and Wang M., An investigation into the influence of electrospinning parameters on the diameter and alignment of poly(hydroxybutyrate-co-hydroxyvalerate) fibers, Journal of Applied Polymer Science. 2010, 120: 1694-1706. |
Tong H.W., Wang M. and Lu W.W., Best Young Engineers Papers Award, for "Electrospun Fibrous Tissue Engineering Scaffolds: Topographic Cues and their Influence on Cell Behaviour", Hong Kong Institution of Engineers. 2010. |
Tong H.W., Wang M., Li Z. and Wang M., Biomedical Materials’s Highlight of 2010, for "Electrospinning, Characterization and In Vitro Biological Evaluation of Nanocomposite Fibers containing Carbonated Hydroxyapatite Nanoparticles", Biomedical Materials. 2010. |
Tong H.W. and Wang M., Electrospinning of fibrous polymer scaffolds using positive voltage or negative voltage: a comparative study, Biomedical Materials. IOP Publishing, 2010, 5: 054110. |
Tong H.W. and Wang M., Electrospinning of poly(hydroxybutyrate-co-hydroxyvalerate) fibrous scaffolds for tissue engineering applications: effects of electrospinning parameters and solution properties, Journal of Macromolecular Science, Part B: Physics. 2011, 50: 1535-1558. |
Tong H.W. and Wang M., Electrospinning of poly(hydroxybutyrate-co-hydroxyvalerate) fibrous tissue engineering scaffolds in two different electric fields, Polymer Engineering & Science. 2011, 51: 1325-1338. |
Tong H.W., Wang M., Li Z. and Lu W.W., Electrospinning, characterization and in vitro biological evaluation of nanocomposite fibers containing carbonated hydroxyapatite nanoparticles, Biomedical Materials. IOP Publishing, 2010, 5: 054111. |
Tong H.W., Wang M. and Lu W.W., Electrospun fibrous tissue engineering scaffolds: topographic cues and their influence on cell behavior, Proceedings of the Biomedical Engineering Conference BME2010, Hong Kong. 2010, Sess. B: B-6. |
Tong H.W., Zhang X. and Wang M., Fabrication of nanofibrous tissue engineering scaffolds via coaxial electrospinning and their characteristics, Proceedings of the 3rd Chinese-European Symposium on Biomaterials in Regenerative Medicine. Nanjing, China, 2011, 1pp. |
Tong H.W., Zhang X. and Wang M., Fabrication of nanofibrous tissue engineering scaffolds via coaxial electrospinning and their characteristics, The Third China-Europe Symposium on Biomaterials in Regenerative Medicine (CESB2011), Nanjing, China. 2011. |
Tong H.W. and Wang M., Forming fibrous nanocomposite tissue engineering scaffolds through electrospinning: a comparative study of three fabrication routes, Bioceramics Development and Applications. 2010, 1: D110107. |
Tong H.W., Hong Kong's Representative at the Young Persons' World Lecture Competition in Kuala Lumpur, The Institute of Materials, Minerals and Mining. 2010. |
Tong H.W., Wang M. and Lu W.W., In vitro biological evaluation of fibrous PHBV polymer and CHA/PHBV nanocomposite scaffolds developed for tissue engineering applications, Bioceramics Development and Applications. 2011, 1: D110168. |
Tong H.W. and Wang M., Tissue engineering scaffolds formed by pseudo-negative voltage electrospinning, SPE Plastics Research Online. USA, Society of Plastics Engineers, 2011, 3pp. |
Tong H.W. and Wang M., Tissue engineering scaffolds formed by pseudo-negative voltage electrospinning, Society of Plastics Engineers – Plastics Research Online. 2011. |
Tong H.W. and Wang M., Winner of the Young Persons’ Lecture Competition (HK Heat), for “Electrospinning: An Old Technology for Modern Medicine”, The Institute of Materials, Minerals and Mining. 2010. |
Researcher : Tong YO |
List of Research Outputs |
Tong Y.O., Leung Y.C. and Liu C.H., A review on ozone evolution and its relationship with boundary layer characteristics in urban environments, Water, Air & Soil Pollution. Netherlands, Kluwer Academic Publishers, 2011, 214: 13-36. |
Researcher : Tsai HL |
List of Research Outputs |
Leung M.K.H., Tsai H.L. and Li G., Fabrication of Nanotube-Array Photocatalyst for Solar Photocatalytic Applications, Proceedings of 18th International Conference on Photochemical Conversion and Storage of Solar Energy (IPS-18). 2010. |
Tsai H.L., Parametric Study on the Fabrication and Modification of TiO2 Nanotube Arrays for Photoeletrocatalytic Degradation of Organic Pollutants, MPhil Thesis. Hong Kong, The University Hong Kong, 2010, 1-120. |
Researcher : Tsang ACH |
List of Research Outputs |
Tsang A.C.H., Malomed B.A., Lam C.K. and Chow K.W., Solitons pinned to hot spots, The European Physical Journal D. 2010, 59: 81-89. |
Researcher : Tsang CH |
List of Research Outputs |
Tsang C.H. and Chow K.W., Exact solutions of the Poisson Boltzmann equation in electrokinetic flows, 63th American Physical Society Division of Fluid Dynamics Meeting, Long Beach, California, USA. 2010. |
Yee T.L., Tsang C.H., Malomed B.A. and Chow K.W., Exact solutions for domain walls in coupled complex Ginzburg Landau equations, Journal of the Physical Society of Japan. 2011, 80: 064001-1 to 064001-7. |
Researcher : Wang C |
Project Title: | Hybrid Control Technology for Low Frequency Noise Attenuation |
Investigator(s): | Wang C, Huang L |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 11/2010 |
Completion Date: | 10/2011 |
Researcher : Wang C |
List of Research Outputs |
Wang C. and Wang M., Electrospun bioactive and biodegradable calcium phosphate/polymer nanocomposite scaffolds for bone tissue engineering, Proceedings of the 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011, 1pp. |
Wang C. and Wang M., Evolution of the core-shell structure for electrospun fibers: from emulsions to fibers, Proceedings of the 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010, 95. |
Wang C. and Wang M., Fabrication and characteristics of bicomponent multifunctional bone tissue engineering scaffolds, Proceedings of the 3rd Chinese-European Symposium on Biomaterials in Regenerative Medicine. Nanjing, China, 2011, 1pp. |
Wang C. and Wang M., Fibrous delivery vehicles formed by dual-source dual-power electrospinning for the dual release of growth factors, Proceedings of the 2011 Spring Meeting of the European Materials Research Society. Nice, France, 2011, 1pp. |
Wang C. and Wang M., Influence of emulsion composition and water phase on the structure and biomolecule release behaviour of electrospun fibers, Proceedings of the 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010, 128. |
Researcher : Wang H |
List of Research Outputs |
Wang H., Leung Y.C., Leung M.H.K., Ni M. and Chan G.K.Y., Modeling And Analysis Of An Aluminium-water Electrochemical Generator For Both Electricity And Hydrogen Production, International Journal of Energy Research. USA, Wiley, 2011, 35: 44-51. |
Wang H., Leung Y.C., Leung M.K.H. and Ni M., Modeling of parasitic hydrogen evolution effects in an aluminum-air cell, Energy & Fuels. USA, American Chemical Society, 2010, 24: 3748-3753. |
Xuan J., Leung M.K.H., Leung Y.C., Ni M. and Wang H., Hydrodynamic focusing in on-chip fuel cells, 11th National Hydrogen Conference. Hangzhou, China, 2010, Abstract book. |
Researcher : Wang L |
Project Title: | Magic Microfluidic T-Junctions: Valving, Bubbling and Bubble-Manipulating |
Investigator(s): | Wang L |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 11/2007 |
Completion Date: | 10/2010 |
Project Title: | Nanofluids: Synthesis, Characterization and Thermal Conductivity |
Investigator(s): | Wang L |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2009 |
Completion Date: | 12/2010 |
Project Title: | Synthesizing Nanofluids inside Microfluidic Droplets |
Investigator(s): | Wang L |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 04/2009 |
Completion Date: | 03/2011 |
Project Title: | Microfluidic Nanofluids: Synthesis and Characterization |
Investigator(s): | Wang L |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2010 |
Project Title: | Constructal Design of Nanofluids |
Investigator(s): | Wang L |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 03/2010 |
Project Title: | The Ninth International Conference on Nanochannels, Microchannels, and Minichannels RESEARCH AND ENGINEERING PRACTICE IN NANOFLUIDS: KEY ISSUES |
Investigator(s): | Wang L |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 06/2011 |
Completion Date: | 06/2011 |
Researcher : Wang L |
List of Research Outputs |
Wang W., Wang L. and Liu F., Grain Boundary Passivation With Small Polar Molecules For Photovoltaics, The 37th IEEE Photovoltaic Specialists Conference. Institute of Electrical and Electronics Engineers, 2011. |
Researcher : Wang M |
Project Title: | Bioactive and biodegradable composites for bone tissue repair |
Investigator(s): | Wang M, Lu WW |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 12/2005 |
Project Title: | Compostie tssue engineering scaffolds and the synergetic effects of simultaneous controlled release of several bioactive substances |
Investigator(s): | Wang M |
Department: | Mechanical Engg |
Source(s) of Funding: | Matching Fund for NSFC Academic Collaboration Award |
Start Date: | 01/2009 |
Project Title: | Electrospinning for Tissue Engineering Scaffolds: Effects of Emitting Electrode Polarity and Formation of Highly Aligned Fibrous Structures |
Investigator(s): | Wang M, Lu WW |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 01/2009 |
Project Title: | An Investigation into the Fabrication and Properties of Bioactive and High Performance Coatings for NiTi Shape Memory Alloy |
Investigator(s): | Wang M |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 05/2009 |
Completion Date: | 04/2011 |
Project Title: | Emulsion Electrospinning and Formation of Bicomponent Fibrous Scaffolds for the Dual Growth Factor Delivery in Tissue Engineering |
Investigator(s): | Wang M |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 12/2009 |
Project Title: | Gold Nanoparticles and their Functionalization for Biomedical Applications |
Investigator(s): | Wang M |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 04/2010 |
Project Title: | 2010 Materials Research Society Fall Meeting Nanocomposite Scaffolds for Bone Tissue Engineering: Design, Fabrication, Surface Modification and Sustained Release of Growth Factor |
Investigator(s): | Wang M |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 11/2010 |
Completion Date: | 12/2010 |
Project Title: | An Investigation into the Fabrication and Properties of Layered Scaffolds for Osteochondral Tissue Engineering |
Investigator(s): | Wang M |
Department: | Mechanical Engg |
Source(s) of Funding: | Seed Funding Programme for Basic Research |
Start Date: | 04/2011 |
List of Research Outputs |
Duan B. and Wang M., Customized Ca-P/PHBV nanocomposite scaffolds for bone tissue engineering: Design, fabrication, surface modification and sustained release of growth factor, Journal of the Royal Society Interface. London, UK, The Royal Society, 2010, 7: S615-S629. |
Duan B. and Wang M., Encapsulation and release of biomolecules from Ca-P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering, Polymer Degradation and Stability. Elsevier, 2010, 95: 1655-1664. |
Duan B., Wang M. and Cheung W.L., Optimized fabrication of Ca-P/PHBV nanocomposite scaffolds via selective laser sintering for bone tissue engineering, Biofabrication. UK, Institute of Physics, 2011, 3: 015001 (13pp). |
Duan B. and Wang M., Selective laser sintered Ca-P/PHBV nanocomposite scaffolds with sustained release of rhBMP-2 for bone tissue engineering, Proceedings of the 35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’11). Daytona Beach, FL, USA, 2011, CD-ROM: 1pp. |
Duan B., Wang M., Li Z., Chan W.C. and Lu W.W., Surface modification of three-dimensional Ca-P/PHBV nanocomposite scaffolds by physical entrapment of gelatin and its In vitro biological evaluation, Frontiers of Materials Science. Germany, Springer, 2011, 5(1): 57-68. |
Duan B., Wang M., Zhou W., Cheung W.L., Li Z. and Lu W.W., Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering, Acta Biomaterialia. The Netherlands, Elsevier, 2010, 6: 4495-4505. |
Lee W.C. and Wang M., Formation of a titania nanotube layer on the titanium alloy surface via DC anodization for biomedical applications, Proceedings of the Biomedical Engineering Conference (BME2010). Hong Kong, 2010, F-4. |
Lee W.C. and Wang M., Incorporation of antibiotics into apatite coatings on NiTi shape memory alloy and their In Vitro release behaviours, Proceedings of the 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011, 1pp. |
Lee W.C. and Wang M., Vancomycin-containing apatite coating on a titanium alloy: Coating fabrication and drug release, Proceedings of the Biomedical Engineering Conference (BME2010). Hong Kong, 2010, C-2. |
Li S. and Wang M., Folic Acid-Chitosan@Gold nanocomposite for potential diagnostic and therapeutic applications, Proceedings of the 2011 Spring Meeting of the European Materials Research Society. Nice, France, 2011, 1pp. |
Li S. and Wang M., Gold-embedded elliptical chitosan microparticles for medical Imaging and drug delivery applications, Proceedings of the 3rd Chinese-European Symposium on Biomaterials in Regenerative Medicine. Nanjing, China, 2011, 1pp. |
Li S. and Wang M., Gold-embedded polymeric micro- or nanospheres for medical applications, Proceedings of the 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011, 1pp. |
Li S. and Wang M., Multifunctional SERS tags based on Au-Ag bimetallic flower-like nanoparticles, Proceedings of the 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011, 1pp. |
Li S. and Wang M., Novel SERS-active Ag/Au bimetallic nanocomposites for biomedical applications, Proceedings of the 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010, 83. |
Li S. and Wang M., Novel SERS-active Ag/Au bimetallic nanocomposites for biomedical applications, Young Investigator Award at the 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010. |
Li S. and Wang M., One-pot synthesis of folic acid-chitosan protected hold nanoflowers, Proceedings of the 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010, 67. |
Li S. and Wang M., Synthesis and characteristics of bimetallic Core-Shell Ag-Au nanoflowers as SERS-tag, Proceedings of the 2011 Spring Meeting of the European Materials Research Society. Nice, France, 2011, 1pp. |
Sun T. and Wang M., A comparative study on titania layers formed on Ti, Ti-6Al-4V and NiTi shape memory alloy through a low temperature oxidation process, Surface and Coatings Technology. Elsevier, 2010, 205: 92-101. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Characteristics and In Vitro biological assessment of (Ti, O, N)/Ti composite coating formed on NiTi shape memory alloy, 5th International Conference on Technological Advances of Thin Film & Surface Coatings. Harbin, China, 2010. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Characteristics and In Vitro biological assessment of (Ti, O, N)/Ti composite coating formed on NiTi shape memory alloy, Proceedings of the 5th International Conference on Technological Advances of Thin Film & Surface Coatings. Harbin, China, 2010, 1pp. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Characteristics and in vitro biological assessment of (Ti, O, N)/Ti composite coating formed on NiTi shape memory alloy, Thin Solid Films. 2011, 519: 4623-4628. |
Sun T., Wang L.P. and Wang M., Characteristics and mechanical properties of a (Ti, O, N)/Ti composite coating fabricated on NiTi shape memory alloy via PIIID, Materials Letters. Elsevier, 2010, 64: 1769-1771. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., Fabrication, nanomechanical properties and In Vitro evaluation of (Ti, O)/Ti composite coating on NiTi shape memory alloy, IFMBE Proceedings. Germany, Springer, 2010, 31: 1222-1225. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti Coatings on NiTi Shape Memory Alloy for Medical Applications, The 2nd Advanced Welding & Joining Technology Conference and International Forum on Recent Advances in Welding Science and Technology (AWJTC-FAWST), Harbin, China. 2011. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti coatings on NiTi shape memory alloy for medical applications, Best Paper Award at the 2nd Advanced Welding & Joining Technology Conference (AWJTC). Harbin, China, 2011. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti coatings on NiTi shape memory alloy for medical applications, Proceedings of the 2nd Advanced Welding & Joining Technology Conference (AWJTC). Harbin, China, 2011, 268-276. |
Sun T., Wang L.P., Wang M., Tong H.W. and Lu W.W., The Best Paper Award, for "PIIID-formed (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti Coatings on NiTi Shape Memory Alloy for Medical Applications", The 2nd Advanced Welding & Joining Technology Conference and International Forum on Recent Advances in Welding Science and Technology. 2011. |
Sun T., Wang L.P. and Wang M., “(Ti, O)/Ti and (Ti, O, N)/Ti composite coatings fabricated via PIIID for the medical application of NiTi shape memory alloy, Journal of Biomedical Materials Research Part B Applied Biomaterials. USA, Wiley, 2011, 96B: 249-260. |
Tong H.W. and Wang M., An investigation into negative voltage electrospinning of PLLA and PLGA fibrous tissue engineering scaffolds, Proceedings of the Biomedical Engineering Conference BME2010, Hong Kong. 2010, Sess. C: C-1. |
Tong H.W. and Wang M., An investigation into the influence of electrospinning parameters on the diameter and alignment of poly(hydroxybutyrate-co-hydroxyvalerate) fibers, Journal of Applied Polymer Science. 2010, 120: 1694-1706. |
Tong H.W., Wang M. and Lu W.W., Best Young Engineers Papers Award, for "Electrospun Fibrous Tissue Engineering Scaffolds: Topographic Cues and their Influence on Cell Behaviour", Hong Kong Institution of Engineers. 2010. |
Tong H.W., Wang M., Li Z. and Wang M., Biomedical Materials’s Highlight of 2010, for "Electrospinning, Characterization and In Vitro Biological Evaluation of Nanocomposite Fibers containing Carbonated Hydroxyapatite Nanoparticles", Biomedical Materials. 2010. |
Tong H.W. and Wang M., Electrospinning of fibrous polymer scaffolds using positive voltage or negative voltage: a comparative study, Biomedical Materials. IOP Publishing, 2010, 5: 054110. |
Tong H.W. and Wang M., Electrospinning of poly(hydroxybutyrate-co-hydroxyvalerate) fibrous scaffolds for tissue engineering applications: effects of electrospinning parameters and solution properties, Journal of Macromolecular Science, Part B: Physics. 2011, 50: 1535-1558. |
Tong H.W. and Wang M., Electrospinning of poly(hydroxybutyrate-co-hydroxyvalerate) fibrous tissue engineering scaffolds in two different electric fields, Polymer Engineering & Science. 2011, 51: 1325-1338. |
Tong H.W., Wang M., Li Z. and Lu W.W., Electrospinning, characterization and in vitro biological evaluation of nanocomposite fibers containing carbonated hydroxyapatite nanoparticles, Biomedical Materials. IOP Publishing, 2010, 5: 054111. |
Tong H.W., Wang M. and Lu W.W., Electrospun fibrous tissue engineering scaffolds: topographic cues and their influence on cell behavior, Proceedings of the Biomedical Engineering Conference BME2010, Hong Kong. 2010, Sess. B: B-6. |
Tong H.W., Zhang X. and Wang M., Fabrication of nanofibrous tissue engineering scaffolds via coaxial electrospinning and their characteristics, Proceedings of the 3rd Chinese-European Symposium on Biomaterials in Regenerative Medicine. Nanjing, China, 2011, 1pp. |
Tong H.W., Zhang X. and Wang M., Fabrication of nanofibrous tissue engineering scaffolds via coaxial electrospinning and their characteristics, The Third China-Europe Symposium on Biomaterials in Regenerative Medicine (CESB2011), Nanjing, China. 2011. |
Tong H.W. and Wang M., Forming fibrous nanocomposite tissue engineering scaffolds through electrospinning: a comparative study of three fabrication routes, Bioceramics Development and Applications. 2010, 1: D110107. |
Tong H.W., Wang M. and Lu W.W., In vitro biological evaluation of fibrous PHBV polymer and CHA/PHBV nanocomposite scaffolds developed for tissue engineering applications, Bioceramics Development and Applications. 2011, 1: D110168. |
Tong H.W. and Wang M., Tissue engineering scaffolds formed by pseudo-negative voltage electrospinning, SPE Plastics Research Online. USA, Society of Plastics Engineers, 2011, 3pp. |
Tong H.W. and Wang M., Tissue engineering scaffolds formed by pseudo-negative voltage electrospinning, Society of Plastics Engineers – Plastics Research Online. 2011. |
Tong H.W. and Wang M., Winner of the Young Persons’ Lecture Competition (HK Heat), for “Electrospinning: An Old Technology for Modern Medicine”, The Institute of Materials, Minerals and Mining. 2010. |
Wang C. and Wang M., Electrospun bioactive and biodegradable calcium phosphate/polymer nanocomposite scaffolds for bone tissue engineering, Proceedings of the 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011, 1pp. |
Wang C. and Wang M., Evolution of the core-shell structure for electrospun fibers: from emulsions to fibers, Proceedings of the 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010, 95. |
Wang C. and Wang M., Fabrication and characteristics of bicomponent multifunctional bone tissue engineering scaffolds, Proceedings of the 3rd Chinese-European Symposium on Biomaterials in Regenerative Medicine. Nanjing, China, 2011, 1pp. |
Wang C. and Wang M., Fibrous delivery vehicles formed by dual-source dual-power electrospinning for the dual release of growth factors, Proceedings of the 2011 Spring Meeting of the European Materials Research Society. Nice, France, 2011, 1pp. |
Wang C. and Wang M., Influence of emulsion composition and water phase on the structure and biomolecule release behaviour of electrospun fibers, Proceedings of the 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010, 128. |
Wang M., Associate Editor (2008 – Present), Journal of Bionanoscience. USA, American Scientific Publishers, 2010. |
Wang M., Bioactive calcium phosphates and their use for composite scaffolds in bone tissue engineering, 35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’11). Daytona Beach, FL, USA, 2011. |
Wang M., Bioactive calcium phosphates and their use for composite scaffolds in bone tissue engineering, Proceedings of the 35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC’11). Daytona Beach, FL, USA, 2011, CD-ROM: 1pp. |
Wang M., Biomaterials and tissue engineering products: From lab-scale fabrication to industrial production, Chinese Journal of Pharmaceutical Analysis. China, Chinese Pharmaceutical Association, 2010, 30: 2462-2468. |
Wang M., Cell Interaction with material surface of tissue engineering scaffolds, 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011. |
Wang M., Cell Interaction with material surface of tissue engineering scaffolds, Proceedings of the 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011, 1pp. |
Wang M., Developing high-performance coatings for NiTi shape memory alloy using the PIIID technique, 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011. |
Wang M., Developing high-performance coatings for NiTi shape memory alloy using the PIIID technique, Proceedings of the 13th CCT Conference: Regenerative Nanomedicine, Tissue and Genetic Engineering, and the Role of Ceramics. Faenza, Italy, 2011, 1pp. |
Wang M., Editorial Board Member (2004 - Present), Journal of Materials Science: Materials in Medicine. Germany, Springer, 2010. |
Wang M., Editorial Board Member (2004 - Present), Surface and Coatings Technology . The Netherlands, Elsevier, 2010. |
Wang M., Editorial Board Member (2006 – Present), Biomedical Materials: Materials for Tissue Engineering & Regenerative Medicine. UK, Institute of Physics, 2010. |
Wang M., Editorial Board Member (2006 – Present), Composites Science and Technology. The Netherlands, Elsevier, 2010. |
Wang M., Editorial Board Member (2007 – Present), Frontiers of Materials Science in China (in English). China and Germany, Higher Education Press Springer, 2010. |
Wang M., Editorial Board Member (2007 – Present), IET Nanobiotechnology. UK, Institution of Engineering and Technology, 2010. |
Wang M., Editorial Board Member (2007 – Present), Journal of Biomimetics, Biomaterials and Tissue Engineering. Switzerland, TransTech Publications, 2010. |
Wang M., Editorial Board Member (2008 – Present), Journal of Bionanoscience. USA, American Scientific Publishers, 2010. |
Wang M., Editorial Board Member (2010 – Present), Journal of the Royal Society Interface . London, UK, The Royal Society, 2010. |
Wang M., Editorial Board Member (2011 – Present), Bioceramics Development and Applications. Belgium, Ashdin Publishing, 2011. |
Wang M., Editorial Board Member (2011 – Present), Nano LIFE. Singapore, World Scientific, 2011. |
Wang M., Editorial Board Member, Regional Editor (2011 – Present), Journal of Biomaterials and Tissue Engineering. USA, American Scientific Publishers, 2011. |
Wang M., Editorial: Surface and interface of biomaterials (Special issue for the second international symposium on surface and interface of biomaterials), Biomedical Materials. UK, Institute of Physics, 2011, 5: 050201, (3pp). |
Wang M., Guest Editor, Special Issue of Biomedical Materials. 2010, 5(10). |
Wang M., Multifunctional tissue engineering scaffolds produced by advanced manufacturing technologies, 3rd Chinese-European Symposium on Biomaterials in Regenerative Medicine. Nanjing, China, 2011. |
Wang M., Multifunctional tissue engineering scaffolds produced by advanced manufacturing technologies, Proceedings of the 3rd Chinese-European Symposium on Biomaterials in Regenerative Medicine. Nanjing, China, 2011, 1pp. |
Wang M. and Duan B., Nanocomposite scaffolds for bone tissue engineering: Design, fabrication, surface modification and sustained release of growth factor, Materials Research Society Symposium Proceedings. Boston, USA, Materials Reserach Society, 2011, 1301: 99-110. |
Wang M. and Duan B., Nanocomposite scaffolds for bone tissue engineering: design, fabrication, surface modification and sustained release of growth factor, Materials Research Society Fall Meeting. Boston, USA, 2010. |
Wang M., Regenerative medicine: Materials and scaffolds for bone tissue regeneration, 2010 International Symposium of Materials on Regenerative Medicine (2010 ISOMRM). Zhunan, Taiwan, 2010. |
Wang M., Regenerative medicine: Materials and scaffolds for bone tissue regeneration, Proceedings of the 2010 International Symposium of Materials on Regenerative Medicine. Zhunan, Taiwan, 2010, 100. |
Wang M., Techanical Committee Member (2006 – Present), International Organization for Standardization (TC150 Implants for surgery). 2010. |
Wang M., Technical Committee Member (2006 – Present), International Organization for Standardization (TC194 Biological evaluation of medical devices). 2010. |
Wang M., Technical Committee Member (2006 – Present), International Organization for Standardization (TC229 Nanotechnologies). 2010. |
Wang M., The application of rapid prototyping technologies in constructing nanocomposite scaffolds for bone tissue engineering, 2011 Spring Meeting of the European Materials Research Society. Nice, France, 2011. |
Wang M., The application of rapid prototyping technologies in constructing nanocomposite scaffolds for bone tissue engineering, Proceedings of the 2011 Spring Meeting of the European Materials Research Society. Nice, France, European Materials Research Society, 2011, 1pp. |
Yang Y., Tang G., Zhang H., Zhao Y., Yuan X., Wang M. and Yuan X., Controllable Dual Release of Dexamethasone and bovine serum albumin from PLGA/b-tricalcium phosphate Composite Scaffolds, Journal of Biomedical Materials Research Part B Applied Biomaterials. USA, Wiley, 2011, 96B: 139-151. |
Yang Y., Tang G., Zhang H., Zhao Y., Yuan X., Fan Y. and Wang M., Controlled release of BSA by microspheres incorporated PLGA scaffolds under cyclic loading, Materials Science and Engineering C. The Netherlands, Elsevier, 2011, 31: 350-356. |
Zhang H., Zhao Y., Han F., Wang M. and Yuan X., Controlled release of bovine serum albumin from electrospun fibrous membranes via improved emulsion-core technique, Proceesings of the Symposium on Innovative Polymers for Controlled Delivery (SIPCD). Suzhou, China, 2010, 3pp. |
Zhou W., Duan B., Wang M. and Cheung W.L., Isothermal and nonisothermal crystallization kinetics of Poly(L-Lactide)/Carbonated hydroxyapatite nanocomposite microspheres, Advances in Diverse Industrial Applications of Nanocomposites . Vienna, Austria, IN-TECH, 2011, 231-260. |
Zhou W., Wang M. and Cheung W.L., Selective laser sintered Poly(L-Lactide)/Carbonated hydroxyapatite nanocomposite scaffolds: A bottom-up approach, Advances in Diverse Industrial Applications of Nanocomposites. Vienna, Austria, IN-TECH, 2011, 203-230. |
Researcher : Wang S |
List of Research Outputs |
Wang S., Motion Planning and Control Simulation for Robot Assisted Femur Fracture Reduction, MPhil Thesis. Hong Kong, The University of Hong Kong, 2010, 1-104. |
Researcher : Wang W |
List of Research Outputs |
Wang W., Wang L. and Liu F., Grain Boundary Passivation With Small Polar Molecules For Photovoltaics, The 37th IEEE Photovoltaic Specialists Conference. Institute of Electrical and Electronics Engineers, 2011. |
Researcher : Wei X |
List of Research Outputs |
Wei X., Nanofluids: Synthesis, Characterization and Thermal Conductivity, PhD Thesis. Hong Kong, The University of Hong Kong, 2010, 1-157. |
Researcher : Wong CC |
List of Research Outputs |
Liu C.H., Cheng W.C., Chung N.H. and Wong C.C., On the Air Pollutant Removal Mechanism from 2D Urban Street Canyons, European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011. |
Liu C.H., Cheng W.C., Chung N.H. and Wong C.C., On the mechanisms of pollutant removal from urban street canyons: a large-eddy simulation approach, ERCOFTAC Workshop Direct & Large-Eddy Simulation 8, Eindhoven University of Technology, Eindhoven, The Netherlands, July 5-9, 2010 . 2010. |
Wong C.C. and Liu C.H., Large-Eddy simulation of Pollutant Plume Dispersion over 2D Idealized Street Canyons, Pacific Rim Applications and Grid Middleware Assembly (PRAGMA) 20, March 2 to 4, 2011, Hong Kong, China, 2011 . 2011. |
Wong C.C. and Liu C.H., Pollutant removal, dispersion and entrainment over two-dimensional idealized street canyons: an LES approach, European Geosciences Union (EGU) General Assembly 2011, Vienna, Austria, April 3 to 8, 2011. |
Researcher : Wong HL |
List of Research Outputs |
Chan B.P., Wong H.L., Wong M.Y., Chan G.C.F. and Yang Z., Methods to Enhance Mesenchymal Stem Cell Migration. , US Regular Patent Application (filed on 14 June 2011) (Application No. 13/159,835). 2011. |
Wong M.Y., Wong H.L., Diao H., Chan G.C.F., Yang Z. and Chan B.P., Regulation of migration characteristics of human mesenchynal stem cells (hMSCs) by encapsulation in collagen matrix. , International Society of Stem Cell Research (ISSCR) 9th Annual Meeting, June 15 - 18, 2011, Toronto, Ontario Canada. . 2011, 147. |
Researcher : Wong KC |
List of Research Outputs |
Wong K.C., Optimization of Building Cooling Systems Based on Genetic Algorithms and Thermal Energy Storage, MPhil Thesis. Hong Kong, The University of Hong Kong, 2011, 1-148. |
Researcher : Wong MY |
List of Research Outputs |
Chan B.P., Wong H.L., Wong M.Y., Chan G.C.F. and Yang Z., Methods to Enhance Mesenchymal Stem Cell Migration. , US Regular Patent Application (filed on 14 June 2011) (Application No. 13/159,835). 2011. |
Poon C.H., Wong M.Y., Chan B.P. and Yu A.C.H., Low-intensity pulsed ultrasound enhances differentiation of osteolineage-committed human mesenchymal stem cells, International Symposium on Therapeutic Ultrasound. 2011. |
Wong M.Y., Wong H.L., Diao H., Chan G.C.F., Yang Z. and Chan B.P., Regulation of migration characteristics of human mesenchynal stem cells (hMSCs) by encapsulation in collagen matrix. , International Society of Stem Cell Research (ISSCR) 9th Annual Meeting, June 15 - 18, 2011, Toronto, Ontario Canada. . 2011, 147. |
Researcher : Wong MY |
List of Research Outputs |
Chan B.P., Wong H.L., Wong M.Y., Chan G.C.F. and Yang Z., Methods to Enhance Mesenchymal Stem Cell Migration. , US Regular Patent Application (filed on 14 June 2011) (Application No. 13/159,835). 2011. |
Poon C.H., Wong M.Y., Chan B.P. and Yu A.C.H., Low-intensity pulsed ultrasound enhances differentiation of osteolineage-committed human mesenchymal stem cells, International Symposium on Therapeutic Ultrasound. 2011. |
Wong M.Y., Wong H.L., Diao H., Chan G.C.F., Yang Z. and Chan B.P., Regulation of migration characteristics of human mesenchynal stem cells (hMSCs) by encapsulation in collagen matrix. , International Society of Stem Cell Research (ISSCR) 9th Annual Meeting, June 15 - 18, 2011, Toronto, Ontario Canada. . 2011, 147. |
Researcher : Wu CBB |
List of Research Outputs |
Wu C.B.B., Tang B., Wen C., Lu W.W., Yan C.H. and Chiu P.K.Y., Individual collagen fibrils of osteoarthritic cartilage are mechanically inferior outside in., Bone. 2010, 47(Supplement 3): S443. |
Researcher : Wu D |
List of Research Outputs |
Sze K.Y. and Wu D., Transition finite element families for adaptive analysis of axisymmetric elasticity problems, Finite Elements in Analysis and Design. 2011, 47: 360-372. |
Researcher : Wu J |
List of Research Outputs |
Wu J., Slope Flows and Thermal Comfort for Hospital Natural Ventilation, MPhil Thesis. Hong Kong, The University of Hong Kong, 2010, 1-120. |
Researcher : Wu X |
List of Research Outputs |
Wu X. and Leung Y.C., Orthogonal array design for biodiesel production optimization using ultrasonic-assisted transestification of camelina sativa L. crantz oil, World Renewable Energy congress 2011. Sweden, CD-Rom: 8pp. |
Researcher : Xu J |
List of Research Outputs |
Xu J. and Chan B.P., Microstructure of Bovine Serum Albumin (BSA) matrix fabricated by two-photon photochemical crosslinking., 2010 International Conference on Biofabrication. Philadelphia, Pennsylvania, USA. Oct 4-6, 2010.. 2010, 134. |
Xu J., Cheng J.P., Cheng S.H. and Chan B.P., Submicron-fabrication of Bovine serum albumin (BSA) matrix via two-photon photochemical Crosslinking. , 2010 IEEE International Conference on Nano/Molecular Medicine and Engineering. Dec 5-9, 2010. Hong Kong, China. . 2010, 71. |
Researcher : Xuan J |
List of Research Outputs |
Xuan J., Leung M.K.H. and Leung Y.C., Fuel cell without membrane: fluid physics and electrochemistry at the sub-micro-liter scale, 11th National Hydrogen Conference. Hangzhou, China, 2010, Abstract book. |
Xuan J., Leung M.K.H., Leung Y.C., Ni M. and Wang H., Hydrodynamic focusing in on-chip fuel cells, 11th National Hydrogen Conference. Hangzhou, China, 2010, Abstract book. |
Researcher : Xue S |
List of Research Outputs |
Xue S., Voice-Enabled CAD System, MPhil Thesis. Hong Kong, The University of Hong Kong, 2010, 1-111. |
Researcher : Yang L |
List of Research Outputs |
Yang L. and Li Y., Simple Correction Methods of Infrared Thermography for Building Exterior Surfaces, International Journal of Ventilation. 2010, 9: 261-272. |
Yang L. and Li Y., Thermal conditions and ventilation in an ideal city model of Hong Kong, Energy and Buildings. 2011, 43: 1139-1148. |
Researcher : Yeung CW |
Project Title: | World Forum for Spine Research 2010 EFFECT OF COMPRESSION LOADING ON HUMAN MESENCHYMAL STEM CELLS-COLLAGEN MICROSPHERES IN AN OVINE INTERVERTEBRAL DISC ORGAN CULTURE – A PRELIMINARY STUDY |
Investigator(s): | Yeung CW |
Department: | Mechanical Engg |
Source(s) of Funding: | URC/CRCG - Conference Grants for Teaching Staff |
Start Date: | 07/2010 |
Completion Date: | 07/2010 |
Project Title: | Effect of dynamic compression on differentiation of MSC to disc-like cells in 3D model and the role of integrin-based mechanosensing mechanism. |
Investigator(s): | Yeung CW, Chan BP |
Department: | Mechanical Engg |
Source(s) of Funding: | Small Project Funding |
Start Date: | 03/2011 |
List of Research Outputs |
Yeung C.W., Junger S., Grad S., Lezuo P., Alini M. and Chan B.P., Effect of compression loading on human mesenchymal stem cells-collagen microspheres in an ovine intervertebral disc organ culture – a preliminary study. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada.. 2010, 1091. |
Yuan M., Yeung C.W., Diao H. and Chan B.P., Differentiation Of Mesenchymal Stem Cells Into Nucleus Pulposus Cells With The Use Of Microencapsulation In Vitro. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada. . 2010, 1092. |
Researcher : Yuan M |
List of Research Outputs |
Yuan M., Yeung C.W., Diao H. and Chan B.P., Differentiation Of Mesenchymal Stem Cells Into Nucleus Pulposus Cells With The Use Of Microencapsulation In Vitro. , World Forum for Spine Research, 5-8 Jul, 2010, Montreal, Canada. . 2010, 1092. |
Researcher : Zhang D |
List of Research Outputs |
Ee B.K., Grimshaw R.H.J., Chow K.W. and Zhang D., Steady transcritical flow over an obstacle: Parametric map of solutions of the forced extended Korteweg-de Vries equation, Physics of Fluids. American Institute of Physics, 2011, 23: 046602-1 to 046602-4. |
Researcher : Zhang X |
List of Research Outputs |
Tong H.W., Zhang X. and Wang M., Fabrication of nanofibrous tissue engineering scaffolds via coaxial electrospinning and their characteristics, Proceedings of the 3rd Chinese-European Symposium on Biomaterials in Regenerative Medicine. Nanjing, China, 2011, 1pp. |
Tong H.W., Zhang X. and Wang M., Fabrication of nanofibrous tissue engineering scaffolds via coaxial electrospinning and their characteristics, The Third China-Europe Symposium on Biomaterials in Regenerative Medicine (CESB2011), Nanjing, China. 2011. |
Researcher : Zhang Y |
List of Research Outputs |
Zhang Y., Microfluidics: Frabrication, Droplets, Bubbles and Nanofluids Synthesis, PhD Thesis. Hong Kong, The University of Hong Kong, 2010, 1-200. |
Researcher : Zhao X |
List of Research Outputs |
Zhao X. and Soh A.K., Phase field simulation of ferroelectrics with cracks, Key Engineering Materials. 2011, 462-463: 710-715. |
Researcher : Zheng G |
Project Title: | Theoretical investigation and atomistic simulation of deformation in iron-based bulk metallic glasses |
Investigator(s): | Zheng G |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 08/2006 |
Project Title: | Atomistic Modeling of Mechanical Properties of Metal-Carbon Nanotube Composites |
Investigator(s): | Zheng G |
Department: | Mechanical Engg |
Source(s) of Funding: | General Research Fund (GRF) |
Start Date: | 08/2007 |
Researcher : Zheng T |
List of Research Outputs |
Zheng T., Chan K.W. and Hu Y., A rehabilitation system of elbow joint neuromuscular recovery, In: N.J. Sarhan, M.H. Hamza, Proceedings of the 6th IASTED International Conference on Human-Computer Interaction. Canada, The International Association of Sci. and Tech. for Deveop., 2011, 7-14. |
Researcher : Zhou W |
List of Research Outputs |
Duan B., Wang M., Zhou W., Cheung W.L., Li Z. and Lu W.W., Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering, Acta Biomaterialia. The Netherlands, Elsevier, 2010, 6: 4495-4505. |
Zhou W., Duan B., Wang M. and Cheung W.L., Isothermal and nonisothermal crystallization kinetics of Poly(L-Lactide)/Carbonated hydroxyapatite nanocomposite microspheres, Advances in Diverse Industrial Applications of Nanocomposites . Vienna, Austria, IN-TECH, 2011, 231-260. |
Zhou W., Wang M. and Cheung W.L., Selective laser sintered Poly(L-Lactide)/Carbonated hydroxyapatite nanocomposite scaffolds: A bottom-up approach, Advances in Diverse Industrial Applications of Nanocomposites. Vienna, Austria, IN-TECH, 2011, 203-230. |
Researcher : Zhou W |
List of Research Outputs |
Duan B., Wang M., Zhou W., Cheung W.L., Li Z. and Lu W.W., Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering, Acta Biomaterialia. The Netherlands, Elsevier, 2010, 6: 4495-4505. |
Zhou W., Duan B., Wang M. and Cheung W.L., Isothermal and nonisothermal crystallization kinetics of Poly(L-Lactide)/Carbonated hydroxyapatite nanocomposite microspheres, Advances in Diverse Industrial Applications of Nanocomposites . Vienna, Austria, IN-TECH, 2011, 231-260. |
Zhou W., Wang M. and Cheung W.L., Selective laser sintered Poly(L-Lactide)/Carbonated hydroxyapatite nanocomposite scaffolds: A bottom-up approach, Advances in Diverse Industrial Applications of Nanocomposites. Vienna, Austria, IN-TECH, 2011, 203-230. |
Researcher : Zhou X |
List of Research Outputs |
Liu C.H., Zhou X. and Chung N.H., Heat dispersion study for transformer bay ventilation improvement for Kennedy Road substation building, 2011. |
Researcher : Zhou Y |
List of Research Outputs |
Sze K.Y. and Zhou Y., Finite element analysis of aircraft cabin seat undergoing high deceleration, Hong Kong Productivity Council. 2010. |
Sze K.Y. and Zhou Y., Session Keynote: Rotation-Free Beam and Shell Models for Geometric Nonlinear Analysis of Thin Shells, International Conference on Computational & Experimental Engineering & Sciences. Nanjing, China. 18-20 April, 2011 . 2011. |