Dept of Mechanical Engg

DEPT OF MECHANICAL ENGG

Researcher : Behera H

List of Research Outputs

Behera H. and Ng C.O., Interaction between oblique waves and multiple bottom-standing flexible porous barriers near a rigid wall, Meccanica. Springer, 2018, 53: 871-885.

Researcher : CAI J

List of Research Outputs

Cai J., Zhu Z., Alkemade P.F., van Veldhoven E., Wang Q., Ge H., Rodrigues S.P., Cai W. and Li W., 3D Volumetric Energy Deposition of Focused Helium Ion Beam Lithography: Visualization, Modeling, and Applications in Nanofabrication, Advanced Materials Interfaces. 2018, 1800203.

Cai J., Zhang C., Khan A., Liang C. and Li W., Highly transparent and flexible polyaniline mesh sensor for chemiresistive sensing of ammonia gas, RSC Advances. 2018, 8(10): 5312-5320.

Li W., MIN S., Li S., Zhu Z., Liang C. and Cai J., Refractometric Sensing Using Gradient Plasmonic Nanostructures: Mapping Spectral Information to Spatial Patterns, META 2018 , the 9th International Conference on Metamaterials, Photonic Crystals and Plasmonics. 2018.

Li W., CAI J., ZHANG C., KHAN A., Liang C., LI S., ZHU Z. and MIN S., Solution-Processed Metallic Micro and Nanostructures for Transparent Electrodes and Plasmonic Sensors, The 17th IEEE International Conference on Nanotechnology (IEEE-NANO 2017). 2017, FrO1O3.1.

Liang C., Qu T., Cai J., Zhu Z., Li S. and Li W., Wafer-scale nanopatterning using fast-reconfigurable and actively-stabilized two-beam fiber-optic interference lithography, Optics Express. 2018, 26(7): 8194-8200.

Zhang C., Khan A., Cai J., Liang C., Liu Y.J., Deng J., Huang S., Li G. and Li W., Stretchable Transparent Electrodes with Solution-processed Regular Metal Mesh for Electroluminescent Light-emitting Film, ACS Applied Materials & Interfaces. 2018.

Researcher : CHAN MC

List of Research Outputs

CHAN M.C. and Liu C.H., Velocity Profiles over Hypothetical Urban Areas in Unstable Stratification: Large-Eddy Simulation Approach, Direct and Large-Eddy Simulation X. 2017.

Researcher : CHANG Y-H

List of Research Outputs

CHANG Y.-.H., LIU C., Rouvimov S., Luo T. and Feng S.P.T., Electrochemical synthesis to convert a Ag film into Ag nanoflowers with high electrocatalytic activity, Chem. Commun.. 2017, 53: 6752-6755.

LIU C., CHANG Y.-.H., CHEN J. and Feng S.P.T., Electrochemical Synthesis of Cu2O Concave Octahedrons with High-Index Facets and Enhanced Photoelectrochemical Activity , ACS Applied Materials & Interfaces. 2017, 9: 39027-39033.

Researcher : CHAO Y

List of Research Outputs

CHAO Y., MAK S.Y., Kong T., Ding Z. and Shum H.C., Droplet formation at the non-equilibrium water/water (w/w) interface, APS Division of Fluid Dynamics (Fall) 2017. American Physical Society, id.KP1.062.

LU Y., Chan Y.K., CHAO Y. and Shum H.C., Wetting of silicone oil onto a cell-seeded substrate, APS Division of Fluid Dynamics (Fall) 2017. American Physical Society, id.KP1.030.

Mak S.Y., Chao Y., Rahman S. and Shum H.C., Droplet Formation by Rupture of Vibration-Induced Interfacial Fingers, Langmuir. 2018, 34(3): 926-932.

Researcher : CHEN J

List of Research Outputs

LIU C., CHANG Y.-.H., CHEN J. and Feng S.P.T., Electrochemical Synthesis of Cu2O Concave Octahedrons with High-Index Facets and Enhanced Photoelectrochemical Activity , ACS Applied Materials & Interfaces. 2017, 9: 39027-39033.

Researcher : CHEN M

List of Research Outputs

CHEN M., XU Z., Kim J.H., Seol S.K. and Kim J., Meniscus-on-Demand Parallel 3D Nanoprinting, ACS Nano. 2018, 12: 4172-4177.

Researcher : CHEN X

List of Research Outputs

YI J., CHEN X. and Wang Z., A Three-Dimensional-Printed Soft Robotic Glove With Enhanced Ergonomics and Force Capability, IEEE Robotics and Automation Letters. 2018, 3: 242-248.

YI J., CHEN X. and Wang Z., A Three-Dimensional-Printed Soft Robotic Glove With Enhanced Ergonomics and Force Capability, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS2017). 2017, 1-8.

YI J., CHEN X., Song C. and Wang Z., Fiber-Reinforced Origamic Robotic Actuator, Soft Robotics. 2018, 5: 81-92.

ZHOU J., CHEN X., Li J., Tian Y. and Wang Z., A Soft Robotic Approach to Robust and Dexterous Grasping, IEEE-RAS International Conference on Soft Robotics. 2018.

ZHOU J., CHEN X., Li J. and Wang Z., A Soft Robotic Gripper With Hybrid Structure Capable Of Robust And Dexterous Grasping, IEEE-RAS International Conference on Soft Robotics. 2018.

ZHOU J., CHEN X. and Wang Z., Champion in 3rd International Soft Robotic Picking Challenge, Shanghai Jiaotong University. 2017.

Researcher : CHEUNG CL

List of Research Outputs

DONG Z., GUO Z., Fu K.C.D., LEE K.H., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., Luk W. and Kwok K.W., Best Poster Paper Award (Merit prize), the 2017 IEEE International Conference on Robotics and Automation (ICRA’17) workshop on Surgical Robots， sponsored by Intuitive Surgical Inc.. 2017.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Best Conference Paper Award, In: 2018 IEEE International Conference on Robotics and Automation (ICRA’18), IEEE International Conference on Robotics and Automation 2018 (ICRA’18). 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., POON W.S., CHAN D.T.M. and Kwok K.W., Compact Design of a Hydraulic Driving Robot for Intra-operative MRI-guided Bilateral Stereotactic Neurosurgery, IEEE Robotics and Automation Letters. 2018, 3(3): 2515-2522.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Finalist for ICRA Best Medical Robotics Paper Award , IEEE International Conference on Robotics and Automation 2018 (ICRA’18) . 2018.

GUO Z., Kwok K.W., DONG Z., LEE K.H., FU H.C. and CHEUNG C.L., US Provisional Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, US 62/623,280 . 2018.

Kwok K.W., CHEUNG C.L., HO J.D.-.L., GUO Z., Chang H.C.C. and Vardhanabhuti V., US Provisional Patent: MRI Tracking Device Design, Fabrication, and Methods of use for MRI-Guided Robotic System, US 62/640,798 . 2018.

LEE K.H., Fu K.C.D., GUO Z., DONG Z., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., LUK W. and Kwok K.W., MR Safe Robotic Manipulator for MRI-guided Intra-cardiac Catheterization, IEEE/ASME Transactions on Mechatronics. 2018, 23(2): 586-595.

Researcher : CHIU TL

List of Research Outputs

CHIU T.L., Tang Y.S., Tsang C.O.A., Leung G.K.K. and Chow K.W., A computational hemodynamics analysis on the correlation between energy loss and clinical outcomes for flow diverters treatment of intracranial aneurysm, Journal of Medical and Biological Engineering. 2018, 39(1): 27-42.

CHIU T.L., LIU T., Chan H.N. and Chow K.W., The dynamics and evolution of poles and rogue waves for nonlinear Schrödinger equations, Communications in Theoretical Physics. Chinese Physical Society and IOP Publishing Ltd., 2017, 68: 290-294.

LIU T., CHIU T.L., Clarkson P.A. and Chow K.W., A connection between the maximum displacements of rogue waves and the dynamics of poles in the complex plane, CHAOS. AIP Publishing, 2017, 27(9): 091103/7.

Researcher : CHOOI WH

List of Research Outputs

YIP C.H., CHOOI W.H., LI H.Y. and Chan B.P., Developing a multiplex microscale screening platform by multiphoton biofabrication technology for maintenance of cell phenotype, ISSCR2017, 4-8 Aug 2017, Boston, USA. 2017.

Researcher : CHOW CK

List of Research Outputs

Fan S., Chan A., Au S., LEONG C.W.M., CHOW C.K., Fan Y.T., Wong R., Chan S., Ng S.K., Lee A.P.W. and Kwok K.W., Personalised Anaesthesia: 3D Printing in Patient with Facial Deformity and Difficult Airway, British Journal of Anaesthesia. 2018, 121(3): 675-678.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., Best Conference Paper Award , the 2017 IEEE International Conference on Real-time Computing and Robotics. 2017.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., FEM-based Soft Robotic Control Framework for Intracavitary Navigation, IEEE International Conference on Real-time Computing and Robotics (RCAR) 2017.

LEE K.H., Fu K.C.D., LEONG C.W.M., CHOW C.K., FU H.C., Althoefer K., Sze K.Y., Yeung C.K. and Kwok K.W., Nonparametric Online Learning Control for Soft Continuum Robot: An Enabling Technique for Effective Endoscopic Navigation, Soft Robotics. 2017, 4(4): 324-337.

Researcher : Cai J

List of Research Outputs

Cai J., Zhang C., Khan A., Liang C. and Li W., Highly transparent and flexible polyaniline mesh sensor for chemiresistive sensing of ammonia gas, RSC Advances. 2018, 8(10): 5312-5320.

Researcher : Chan ATY

Project Title:	Strategic guidelines for future development to achieve sustainable air quality in urban areas
Investigator(s):	Chan ATY
Department:	Mechanical Engg
Source(s) of Funding:	Other Funding Scheme
Start Date:	09/1999

Project Title:	Evaluation of air pollution indication system in Hong Kong
Investigator(s):	Chan ATY
Department:	Mechanical Engg
Source(s) of Funding:	Pollution Studies in Hong Kong
Start Date:	01/2000

Project Title:	16th Engineering Mechanics Conference (ASCE) Drag Effect on Mountain Waves by Flow Over Topography
Investigator(s):	Chan ATY
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	07/2003

Project Title:	Indoor/outdoor air quality relationships of respirable suspended particulates, nitrogen oxides and carbon monoxides in urban buildings
Investigator(s):	Chan ATY, Li Y
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	09/2003

Project Title:	Correlation between urban morphological attributes and air pollution in urban areas in Hong Kong
Investigator(s):	Chan ATY
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	09/2004

Project Title:	15th United States National Congress on Theoretical and Applied Mechanics Indoor/outdoor Air Quality Relationship in an Urban Street Canyon
Investigator(s):	Chan ATY
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2006

Researcher : Chan BP

Project Title:	Photochemical crosslinking (PC) technology in fabrication of collagen-based scaffolds for tissue engineering
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	02/2004

Project Title:	International Society for Stem Cell Research 4th ISSCR Annual Meeting A Novel 3-Dimensional Culture System for Human Mesenchymal Stem Cells
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2006

Project Title:	Collagen biomaterial and bone marrow derived mesenchymal stem cell (MSCs) based therapy - Second generation tissue engineering solutions for cartilage repair
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	07/2008

Project Title:	Collagen biomaterial and bone marrow derived mesenchymal stem cell (MSCs) based therapy - Second generation tissue engineering solutions for cartilage repair
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	08/2008

Project Title:	Creating Stable Tissue Interfaces for Bioengineered Intervertebral Disc Segment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	02/2009

Project Title:	Creating Stable Tissue Interfaces for Bioengineered Intervertebral Disc Segment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	05/2009

Project Title:	Research Output Prize
Investigator(s):	Chan BP, Li CH, Sze KY, Ngan AHW
Department:	Mechanical Engg
Source(s) of Funding:	Research Output Prize (in Faculty)
Start Date:	12/2009

Project Title:	Outstanding Young Researcher Award 2009-10
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Outstanding Young Researcher Award
Start Date:	12/2010

Project Title:	Bioengineering a Prototype Intervertebral Disc Motion Segment [ITS/552/09FP]
Investigator(s):	Chan BP, Luk KDK, Cheung KMC
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2010

Project Title:	Bioengineering a Prototype Intervertebral Disc Motion Segment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2010

Project Title:	Bioengineering a Prototype Intervertebral Disc Motion Segment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2010

Project Title:	Development of a human mesenchymal stem cell (MSC)-based tri-layered osteochondral graft for osteoarthritis (OA) treatment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Support Programme (Tier 2)
Start Date:	12/2014

Project Title:	Development of a Human Mesenchymal Stem Cell (MSC)-based Tri-layered Osteochondral Graft for Osteoarthritis (OA) Treatment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2014

Project Title:	Development of a Human Mesenchymal Stem Cell (MSC)-based Tri-layered Osteochondral Graft for Osteoarthritis (OA) Treatment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2014

Project Title:	Research Output Prize (Faculty of Engineering)
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Research Output Prize (in Faculty)
Start Date:	12/2014

Project Title:	Rationalizing scaffold design with optimal cell niche for mesenchymal stem cell-based therapy in disc degeneration
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	NSFC/RGC Joint Research Scheme
Start Date:	01/2015
Completion Date:	12/2018

Project Title:	Bioengineering a human mesenchymal stem cell-based osteochondral construct with calcified cartilage interface for cartilage repair
Investigator(s):	Chan BP, Wong CS, Yan CH, Yau WP
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2015
Completion Date:	12/2017

Project Title:	Development of a Human Mesenchymal Stem Cell (MSC)-based Tri-layered Osteochondral Graft for Osteoarthritis (OA) Treatment
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	11/2015

Project Title:	Compression-induced actin protrusions (CAPs) in human mesenchymal stem cells - Understanding the mechanisms of mechanoregulation
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2016

Project Title:	Collagen microencapsulation of human mesenchymal stem cells as an in vitro model recapitulating mesenchymal condensation – Matrix-driven modulation of molecular signaling for cartilage tissue engineering
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2017

Project Title:	3D encapsulation-induced autophagy promotes mesenchymal condensation and chondrogenesis in human MSCs?
Investigator(s):	Chan BP, Lam KL
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	06/2017

Project Title:	Bioengineered osteochondral constructs for cartilage regeneration - A minipig study
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Translational and Applied Research
Start Date:	06/2017

Project Title:	Translating Of A Novel Cartilage Regeneration Technology Into A New Therapeutic Treatment For Patients With Focal Cartilage Injuries
Investigator(s):	Chan BP, Chan GCF, Yau WP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Support Programme (Tier 2)
Start Date:	09/2017

Project Title:	Translating Of A Novel Cartilage Regeneration Technology Into A New Therapeutic Treatment For Patients With Focal Cartilage Injuries
Investigator(s):	Chan BP, Chan GCF, Yau WP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	10/2017

Project Title:	Translating Of A Novel Cartilage Regeneration Technology Into A New Therapeutic Treatment For Patients With Focal Cartilage Injuries
Investigator(s):	Chan BP, Chan GCF, Yau WP
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2017

Project Title:	Reconstituting the soluble cell niche in vitro using multiphoton-based microfabrication
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	06/2018

Project Title:	Signaling by Adhesion Receptors Gordon Research Conference; Mechanical compression induced maturation of cell matrix adhesions in human mesenchymal stem cells
Investigator(s):	Chan BP
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	06/2018

Project Title:	A Multiphoton 3D Micro-printing-based Micro-fabrication and Micro-patterning Platform Technology
Investigator(s):	Chan BP, Chan SY, Gao B, Lee CW, Wong KKY, Yu C
Department:	Mechanical Engg
Source(s) of Funding:	Platform Technology Funding
Start Date:	06/2018

List of Research Outputs

Chan B.P., Enhanced migratory activity and in vivo engraftment rate of human mesenchymal stem cells after microencapsulation in and transmigration through a collagen barrier, ISSCR 2017, 4-8 Aug 2017, Boston, USA. 2017.

Chan B.P., Multiphoton fabrication technology: A feasible platform for cell niche study, The 11th IEEE International Conference on Nano/Molecular Medicine and Engineering. HKPU, Hong Kong. 4 Dec 2017 . 2017.

Chan B.P., Tissue engineering for cartilage repair; opportunities and challenges, 2018 International Symposium on Musculoskeletal Regeneration Network (MRN). 22-23 Apr 2018, Hangzhou, China.. 2018.

Ding Y., Liang X., Zhang Y.L., Yi L., Shum H.C., Chen Q., Chan B.P., Fan H.M., Liu Z.M., Tergaonkar V., Qi Z.Q., Tse H.F. and Lian Q., Rap1 deficiency-provoked paracrine dysfunction impairs immunosuppressive potency of mesenchymal stem cells in allograft rejection of heart transplantation, Cell Death & Disease. 2018, 9.

HUANG N., Li C.W. and Chan B.P., Multiphoton 3D micro-printing of protein micro-patterns with spatially controlled heterogeneity - A platform for single cell matrix niche studies, Advanced Biosystems. 2018, 1-13.

MA J., WANG X., Li C.W., HUANG N. and Chan B.P., Multiphoton fabrication of functionalized protein micropatterns - An in vitro model for study on cell-matrix interactions in human mesenchymal stem cells, ISSCR 2017, 4-8 Aug 2018, Boston, USA. 2017.

Ma J.N., Li C.W., HUANG N., WANG X., TONG M., Ngan A.H.W. and Chan B.P., Multiphoton Fabrication of Fibronectin-Functionalized Protein Micropatterns: Stiffness-Induced Maturation of Cell–Matrix Adhesions in Human Mesenchymal Stem Cells, ACS Applied Materials & Interfaces. 2017.

TONG M., HUANG N., Ngan A.H.W., Du Y.N. and Chan B.P., Preferential sensing and response to microenvironment stiffness of human dermal fibroblast cultured on protein micropatterns fabricated by 3D multiphoton biofabrication, Scientific Reports. 2017, 12402.

Tsang K.K., Wong S.Y., Yao K.M., Chan B.P. and Lo A.C.Y., Doxycycline-terminable intraocular drug delivery cell-encapsulating device, The 33rd Asia-Pacific Academy of Ophthalmology Congress 2018.

WANG X. and Chan B.P., Two-photon photochemical crosslinking based immobilization of neutravidin on protein matrix surface, The 8th WACBE World Congress on Bioengineering, 30 Jul to 2 Aug 2017, HKPU, Hong Kong. 2017, 1-4.

YEUNG P., Zhang W., WANG X., Yan C.H. and Chan B.P., A human osteoarthritis osteochondral oran culture model for cartilage tissue engineering, Biomaterials. 2018, 162: 1-21.

YEUNG P., ZHANG W., Yan C.H. and Chan B.P., A human osteoarthritis osteochondral organ culture model for cartilage tissue engineering, Biomaterials. 2018.

YIP C.H., CHOOI W.H., LI H.Y. and Chan B.P., Developing a multiplex microscale screening platform by multiphoton biofabrication technology for maintenance of cell phenotype, ISSCR2017, 4-8 Aug 2017, Boston, USA. 2017.

Yuan M., Pai P.-.J., Liu X., Lam H. and Chan B.P., Proteomic analysis of nucleus pulposus cell-derived extracellular matrix niche and its effect on phenotypic alteration of dermal fibroblasts., Scientific Reports. 2018.

Researcher : Chan CW

Project Title:	IFAC Symposium on Artificial Intelligence in Real Time Control AIRTC-2000 Adaptive Control of Stochastic Nonlinear Systems Using Neurofuzzy Networks Modelling of Nonlinear Dynamic Systems Using Support Vector Neural Networks
Investigator(s):	Chan CW
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	10/2000

Project Title:	International Federation of Automatic Control 15th IFAC World Congress Asymptotic Local Approach in Fault Detection with Faults Modeled by Neurofuzzy Networks
Investigator(s):	Chan CW
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	07/2002

Project Title:	Installation of wave suppressor in the Victoria Harbour
Investigator(s):	Chan CW
Department:	Mechanical Engg
Source(s) of Funding:	Utility Information Ltd.
Start Date:	06/2006

Project Title:	Neurofuzzy network based adaptive control for nonlinear networked control systems
Investigator(s):	Chan CW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2008

Researcher : Chan HN

List of Research Outputs

CHIU T.L., LIU T., Chan H.N. and Chow K.W., The dynamics and evolution of poles and rogue waves for nonlinear Schrödinger equations, Communications in Theoretical Physics. Chinese Physical Society and IOP Publishing Ltd., 2017, 68: 290-294.

Chan H.N. and Chow K.W., Rogue waves for an alternative system of coupled Hirota equations: Structural robustness and modulation instabilities, Studies in Applied Mathematics. Wiley Periodicals, Inc., 2017, 139(1): 78-103.

Ding E., Chan H.N., Chow K.W., Nakkeeran K. and Malomed B.A., Exact states in waveguides with periodically modulated nonlinearity, A Letters Journal Exploring the Frontiers of Physics. EPLA, 2017, 119: 54002-p1/p5.

Researcher : Chan KL

Project Title:	Thermal investigation of large area organic memory array on cellulose fiber paper: How does waste heat cause memory loss?
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	11/2013

Project Title:	High sensitivity optical sensor array on hemispherical surface: a step towards the artificial eyeball
Investigator(s):	Chan KL, Shih KC
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	08/2014

Project Title:	Next generation of temperature sensor based on organic/metal hybrid thin film thermistor: from characterizations to device fabrications
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	11/2014

Project Title:	High Sensitivity Optical Sensor Array On Hemispherical Surface: A Step Towards The Artificial Eyeball
Investigator(s):	Chan KL, Shih KC
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	11/2014

Project Title:	Organic memory array fabricated under ambient air environment: from polycrystalline thin film to single crystal devices
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	NSFC/RGC Joint Research Scheme
Start Date:	01/2015
Completion Date:	12/2018

Project Title:	Research Output Prize (Faculty of Engineering)
Investigator(s):	Chan KL, Roberts RC
Department:	Mechanical Engg
Source(s) of Funding:	Research Output Prize (in Faculty)
Start Date:	02/2016

Project Title:	High sensitivity pressure sensor for biomedical applications
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Translational and Applied Research
Start Date:	04/2016

Project Title:	Thermal characterizations of grain boundaries in organic single crystals: from trap state physics to temperature sensor array
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	11/2016

Project Title:	Body heat power generation by using organic thermoelectric materials
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	04/2017

Project Title:	Conformal temperature sensor for biomedical application
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Translational and Applied Research
Start Date:	06/2017

Project Title:	Integrated flexible heater and temperature sensor array for conformal biomedical ablation
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	10/2017

Project Title:	In-situ Deposition and characterizations stage for 2-D X-ray diffraction
Investigator(s):	Chan KL, Huang M, Feng SPT, Kim J, Li W, Choy WCH, Shih K, Yam VWW
Department:	Mechanical Engg
Source(s) of Funding:	Small Equipment Grant
Start Date:	04/2018

Project Title:	Ultra-flexible and low power-consuming sensors for implantation and in vivo monitoring
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	04/2018

Project Title:	MRS srping meeting 2018; Neuromorphic computing by organic transistor circuits
Investigator(s):	Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	04/2018
Completion Date:	04/2018

List of Research Outputs

JI X., Zhou P., Zhong L., Xu A., Tsang C.O.A. and Chan K.L., Smart surgical catheter for C-reactive protein sensing based on an imperceptible organic transistor, Advanced Science. 2018, Epub on 2018-05-03.

Researcher : Chan KW

Project Title:	Computer-aided mould design and manufacture of thermoformed PVC sheets
Investigator(s):	Chan KW
Department:	Mechanical Engg
Source(s) of Funding:	Other Funding Scheme
Start Date:	01/2002

Project Title:	Design and development of implantable artifical finger joints for biological repair
Investigator(s):	Chan KW, Chow SP, Lu WW, Chiu PKY, Ngan AHW, Luk KDK
Department:	Mechanical Engg
Source(s) of Funding:	Guangdong-Hong Kong Technology Cooperation Funding Scheme
Start Date:	06/2007

Project Title:	Design and development of implantable artifical finger joints for biological repair
Investigator(s):	Chan KW
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	10/2009

Project Title:	Design and development of implantable artifical finger joints for biological repair
Investigator(s):	Chan KW
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	10/2009

Researcher : Chan YK

Project Title:	ARVO Annual Meeting 2018; Emulsification of silicone oil (SiO) tamponade with high-molecular-weight (HMW) additive under simulated saccadic eye movements in vitro using an“Eye-on-a-Chip"
Investigator(s):	Chan YK
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	04/2018
Completion Date:	05/2018

List of Research Outputs

Chan Y.K., Csanner G., Shum H.C., Williams R.L., Cheung N.D. and Wong D.S.H., Towards Better Characterisation And Quantification Of Emulsification Of Silicone Oil In Vitro., Acta Ophthalmologica. 2017, 95: e385-e392.

Chan Y.K., Ultra-fast Assembly Of Scaffold-free Cell Sheet With Eye-related Cells, Hong Kong Ophthalmology and Visual Sciences Research Meeting 2017. 2017.

FU L., Fung K.C.F., Lo A.C.Y., Chan Y.K., So K.F., Wong Y.H.I., Shih K.C. and Lai J.S.M., Transcorneal Electrical Stimulation Inhibits Retinal Microglial Activation and Enhances Retinal Ganglion Cell Survival After Acute Ocular Hypertensive Injury, Translational Vision Science and Technology. 2018, 7:3.

LU Y., Chan Y.K., CHAO Y. and Shum H.C., Wetting of silicone oil onto a cell-seeded substrate, APS Division of Fluid Dynamics (Fall) 2017. American Physical Society, id.KP1.030.

Nie L., Pan W., Fang A., Li Z., Qian Z., Fu L. and Chan Y.K., Combined Phacoemulsification and Goniosynechialysis under Endoscope for Chronic Primary Angle-closure Glaucoma, Journal of Ophthalmology. 2018.

Nie L., Fang A., Pan W., Ye H., Chan Y.K., Fu L. and Qu J., Prospective Study on Ex-PRESS Implantation Combined with Phacoemulsification in Primary Angle-closure Glaucoma Coexisting Cataract: 3-year Results, Current Eye Research. 2018, 43: 1045-1051.

Stefansson D.E., Chan Y.K., Bek T., Hardarson S.H., Wong D. and Wilson D.I., Laws Of Physics Help Explain Capillary Non-perfusion In Diabetic Retinopathy, Eye. 2018, 32: 210-212.

Wong D., Chan Y.K., Bek T., Wilson D.I. and Stefansson E., Intraocular currents, Bernoulli's principle and non-drainage scleral buckling for rhegmatogenous retinal detachment, Eye. 2018, 32: 213–221.

Researcher : Chao YHC

Project Title:	Resuspension of bioaerosols on surfaces loaded with dust and its effect on microorganism viability
Investigator(s):	Chao YHC
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2016

Project Title:	Study of Cooling Effect by Surface Treatment and its Application to Smart Green Buildings
Investigator(s):	Chao YHC
Department:	Mechanical Engg
Source(s) of Funding:	Collaborative Research Fund (CRF) - Group Research Project
Start Date:	06/2017

Project Title:	Investigation of enhancement of particle deposition by micro-structured surfaces in turbulent flows
Investigator(s):	Chao YHC
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2018

List of Research Outputs

Chan K.C., Tso C.Y., Wu C. and Chao Y.H.C., Enhancing the Performance of a Zeolite 13X/CaCl2 – Water Adsorption Cooling System by Improving Adsorber Design and Operation Sequence, Energy and Buildings. 2018, 158: 1368-1378.

Chao Y.H.C., Challenges and Opportunities in Engineering Education, Invited Keynote Speaker in Cultivation and Research of Interdisciplinary Engineering Education, Ministry of Education Sponsored Conference, Feng Chia University. Taiwan, 2018.

Chao Y.H.C., Emerging Cooling Technologies in Zero Energy Building Applications, Asia-Pacific Economic Cooperation APEC Nearly/Net Zero Energy Building Workshop. Honolulu, USA, 2017.

Chao Y.H.C., Good Environmental Quality while Achieving Building Energy Efficiency, Building Energy Efficiency (BEE) HUB International Forum. National University of Singapore, 2017.

Chao Y.H.C., Invited Keynote Speaker, Some New Advanced Cooling Technology Development for Green Building Applications, International Conference on Green Energy and Applications, NTU and IEEE. Singapore, 2017.

Chao Y.H.C., Invited Keynote Speaker, Some New Advanced Cooling Technology Development for Green Building Applications, The 6th International Conference on Informatics, Environment, Energy and Applications (IEEA2017). Jeju Island, Korea, 2017.

Chao Y.H.C., Member of the Editorial Board, Building Simulation: An International Journal (2007 – Present). 2018.

Chao Y.H.C., Member of the Editorial Board, Building and Environment (2015 – Present). 2018.

Chao Y.H.C., Member of the Editorial Board, Indoor Air (2014 – Present). 2018.

Chao Y.H.C., Passive Radiative Cooling Development for Use in Built Environment, Third APEC Workshop on Sustainable Cities and Energy Technologies. Hong Kong, 2018.

Chao Y.H.C., Regional Editor, Journal of Indoor and Built Environment (Since 2014. 2018.

Chen Y.M., Fu S.C., Zhang J.S., Ou B.X., Wu C.L. and Chao Y.H.C., Effect of Solidity on the Performance of a Vertical Axis Wind Turbine by Numerical Simulation Analysis, Advances in New and Renewable Energy. 2017, 5(6): 409-416.

Fu S.C., Tso C.Y., Fong Y.S. and Chao Y.H.C., Evaporation of Al₂O₃-water Nanofluids in an Externally Micro-grooved Evaporator, Science and Technology for the Built Environment. 2017, 23: 345-354.

Fu S.C., Cheung Y.S., Lee H.H., Kwan J.K.C. and Chao Y.H.C., Studies on Detachment Behavior of Micron Sized Droplets: A Comparison between Pure Fluid and Nanofluid, Aerosol Science and Technology. 2018, 52(1): 69-77.

Ho T.C., Fu S.C., Chao Y.H.C. and Gupta S., Numerical study on merging and interaction of jet diffusion flames, Journal of Heat Transfer. 2018, 140(10): 101201.

Hussain A., Abidi I.H., Tso C.Y., Chan K.C., Luo Z. and Chao Y.H.C., Thermal Management of Lithium Ion Batteries Using Graphene Coated Nickel Foam Saturated with Phase Change Materials, International Journal of Thermal Sciences. 2017, 124: 23-35.

Lee H.H., Fu S.C., Tso C.Y. and Chao Y.H.C., Study of Residue Patterns of Aqueous Nanofluid Droplets with Different Particle Sizes and Concentrations on Different Substrates, International Journal of Heat and Mass Transfer. 2017, 105: 230-236.

Liang X., Fu S.C., Ou B.X., Wu C.L., Chao Y.H.C. and Pi K.H., Computational Study of the Effects of the Radius Ratio and Attachment Angle on the Performance of a Darrieus-Savonius Combined Wind Turbine, Renewable Energy. 2017, 113: 329-334.

Morawska L., Ayoko G.A., Bae G.N., Buonanno G., Chao Y.H.C., Clifford S., Fu S.C., Hanninen O., He C. and Isaxon C., Airborne Particles in Indoor Environment of Homes, Schools, Offices and aged Care Facilities: The Main Routes of Exposure, Environment International. 2017, 108: 75-83.

Ou B.X., Fu S.C., Wu C.L., Chao Y.H.C., Liang X.T., Li H.X. and Xie Y.X., A Maximum Wind Power Point Tracing Method Based on the Improved Hill Climbing Algorithm, Chinese Full Application. 2017, Patent No. 201510209324.0.

Song M., Tso C.Y., Chao Y.H.C. and Wu C., Techno-Economic Analysis on Frosting/Defrosting Operations for an Air Source Heat Pump Unit with an Optimized Multi-Circuit Outdoor Coil, Energy and Buildings. 2018, 166: 165-177.

Traipattanakul B., Tso C.Y. and Chao Y.H.C., Study of Jumping Water Droplets on Superhydrophobic Surfaces with Electric Fields, International Journal of Heat and Mass Transfer. 2017, 115: 672-681.

Tso C.Y., Chan K.C. and Chao Y.H.C., A Field Investigation of Passive Radiative Cooling under Hong Kong’s Climate, Renewable Energy. 2017, 106: 52-61.

Tso E. and Chao Y.H.C., Invited Keynote Speaker, Current Research Challenges and Directions in Building Environmental Quality and Energy Efficient Cooling Technology, World Summit on Advances in Science, Engineering and Technology. University of Cambridge (Organized by VIT India), 2018.

Wang X.J., Tso C.Y., Traipattanakul B. and Chao Y.H.C., Development of a Phase Change Material (PCM) based Thermal Switch, The Hong Kong Institution of Engineers (HKIE) Transactions, Special Issue on Energy Engineering with Applications in Smart Green Buildings. 2017, 24(2): 107-112.

Wei H.X., Wu C.L., Chao Y.H.C., Ou B.X., Liang X.T., Xie Y.X., Han X. and Li Y.P., A Groove Type Concentrated Solar Thermoelectric Generator, Chinese Full Application. 2017, Patent No. 201510136309.8.

Wu C.L., He W., Chao Y.H.C., Chen J. and Luo S.W., A Kind of Adsorption Refrigeration System and its Control Method used in Boiler Flue Gas Waste Heat Recovery, China Utility Model. 2018, Patent No. 201721332355.6.

Wu C.L., Zhang C.H., Guo C.H., Fu X.C. and Chao Y.H.C., Analysis of ultrafine particle emission and sink characteristics from side-stream cigarette smoke, 香烟侧流烟中超细颗粒物释放及衰减特性, Acta Scientiae Circumstantiae. 环境科学学报, 2018, 38(4): 1410-1417.

Xie Y.X., Fu S.C., Wu C.L. and Chao Y.H.C., Influence of Sinusoidal Airflow and Airflow Distance on Human Thermal Response to a Personalized Ventilation System, Indoor and Built Environment. 2018, 27(3): 317.

Yuen W.T., Fu S.C. and Chao Y.H.C., The Effect of Aerosol Size Distribution and Concentration on the Removal Efficiency of an Acoustic Aerosol Removal System, Journal of Aerosol Science. 2017, 104: 79-89.

Zhu L., Tso C.Y., Chan K.C., Wu C., Chao Y.H.C., Chen J., He W. and Luo S., Experimental Investigation on Composite Adsorbent –Water Pair for a Solar-Powered Adsorption Cooling System, Applied Thermal Engineering. 2018, 131: 649-659.

Zhu L.Q., Tso C.Y., He W., Li P., Wu C.L. and Chao Y.H.C., A Field Investigation of a Solar-powered Adsorption Cooling System under Guangzhou’s Climate with Various Numbers of Heat Exchangers in Adsorbers, Science and Technology for the Built Environment. 2017, 1-11.

Researcher : Chen K

Project Title:	Virtual component modelling for components made of a multiphase perfect material
Investigator(s):	Chen K
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	02/2005

Researcher : Chen KZ

Project Title:	Virtual component modelling for components made of a multiphase perfect material
Investigator(s):	Chen K
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	02/2005

Researcher : Chen MZ

Project Title:	Restricted Complexity Passive Network Synthesis
Investigator(s):	Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	Network synthesis with applications in suspension systems
Investigator(s):	Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	National Natural Science Foundation of China (NSFC) - General Program
Start Date:	01/2014

Project Title:	Field-effect solar cells with ferroelectrics
Investigator(s):	Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	08/2014

Project Title:	Inerter-incorporated vehicle suspension platform for designing and prototyping
Investigator(s):	Chen MZ, Huang L, Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	09/2014

Project Title:	Inerter-incorporated vehicle suspension platform for designing and prototyping
Investigator(s):	Chen MZ, Huang L, Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Support Programme (Tier 3)
Start Date:	09/2014

Project Title:	Inerter-incorporated Vehicle Suspension Platform for Designing and Prototyping
Investigator(s):	Chen MZ, Huang L, Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	09/2014

Project Title:	Mechanical Network Synthesis with Applications
Investigator(s):	Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	10/2014

Project Title:	Stability of Switched Systems with Application to Smart Grid
Investigator(s):	Chen MZ, Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	03/2015

Project Title:	Inerter-incorporated Vehicle Suspension Platform for Designing and Prototyping
Investigator(s):	Chen MZ, Huang L, Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	09/2015

Researcher : Chen Q

List of Research Outputs

Ding Y., Liang X., Zhang Y.L., Yi L., Shum H.C., Chen Q., Chan B.P., Fan H.M., Liu Z.M., Tergaonkar V., Qi Z.Q., Tse H.F. and Lian Q., Rap1 deficiency-provoked paracrine dysfunction impairs immunosuppressive potency of mesenchymal stem cells in allograft rejection of heart transplantation, Cell Death & Disease. 2018, 9.

Researcher : Chen Y

Project Title:	Tailored band structures for enhanced power factor in SnTe via band convergence and resonant states
Investigator(s):	Chen Y
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	03/2016
Completion Date:	02/2018

Project Title:	Origins of ultra-low thermal transport in giant anharmonic SnSe and their applications in thermoelectric materials engineering
Investigator(s):	Chen Y
Department:	Mechanical Engg
Source(s) of Funding:	Early Career Scheme (ECS)
Start Date:	09/2016

Project Title:	Exploring the topologically protected edge state of bilayer graphene by Nano-ARPES and DFT
Investigator(s):	Chen Y
Department:	Mechanical Engg
Source(s) of Funding:	France/Hong Kong Joint Research Scheme - Travel Grants
Start Date:	01/2017

Project Title:	Band nestification for enhancing the figure of merit of thermoelectric materials
Investigator(s):	Chen Y
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	03/2017

Project Title:	A combined theoretical and experimental study of the vibrational and thermal-transport properties of partially liquid-like crystalline solids
Investigator(s):	Chen Y
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2018

Project Title:	Combined experimental and theoretical studies of lattice dynamics in PbTe under high pressures
Investigator(s):	Chen Y
Department:	Mechanical Engg
Source(s) of Funding:	Germany/Hong Kong Joint Research Scheme
Start Date:	01/2018

Project Title:	2018 Conference on Electronic and Advanced Materials; Topological states and phonon couplings in electronic materials under large strains
Investigator(s):	Chen Y
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	01/2018
Completion Date:	01/2018

Project Title:	Engineering the nano- and microstructures of materials for improved thermal and structural properties
Investigator(s):	Chen Y, Huang M, Feng SPT
Department:	Mechanical Engg
Source(s) of Funding:	Small Equipment Grant
Start Date:	04/2018

Project Title:	Superior out-of-plane electrical transport properties in n-type stannous selenide for increased thermoelectric efficiency
Investigator(s):	Chen Y
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	04/2018

List of Research Outputs

Chang C., Wu M., He D., Pei Y., Wu C.F., Wu X., YU H., Zhu F., Wang K., Chen Y., Huang L., Li J.F., He J. and Zhao L.D., 3D charge and 2D phonon transports leading to high out-of-plane ZT in n-type SnSe crystals, Science. 2018, 360: 778.

Chen Y., Editorial board member, Scientific Reports. 2018.

Chen Y., First-principles calculations of phonon-phonon coupling in anharmonic materials, J-PARC Center, Japan Atomic Energy Agency. 2018.

Chen Y., Novel material behaviors under high pressures, 9th Joint Meeting of Chinese Physicists Worldwide (OCPA9). 2017.

Chen Y., Novel material behaviors under high pressures, The 9th Joint Meeting of Chinese Physicists Worldwide: International Conference on Physics & Education "New opportunities in Physics" (OCPA9), China . 2017.

Chen Y., Strain tuning effects on phonon coupling in energy-related materials, Karlsruhe Institute of Technology, Karlsruhe, Germany. 2018.

Chen Y., Topological states and phonon couplings in electronic materials under large strains, Conference on Electronic and Advanced Materials (EAM). 2018.

Chen Z., Qin S., Shang J.X., Wang F.H. and Chen Y., Size effects of NiTi nanoparticle on thermally induced martensitic phase transformation, Intermetallics. 2018, 94: 47.

Ding R., Shang J.X., Wang F.H. and Chen Y., Electrochemical Pourbaix diagrams of Ni-Ti alloys from first-principles calculations and experimental aqueous states, Comput. Mater. Sci.. 2017, 143: 431.

Feng Y.X., Shang J.X., Qin S.J., Lu G.H. and Chen Y., Twin and dislocation mechanisms in tensile W single crystal with temperature change: a molecular dynamics study, Phys. Chem. Chem. Phys.. 2018, 20: 17727.

Kye Y.H., Yu C.J., Jong U.G., Chen Y. and Walsh A., Critical role of water in defect aggregation and chemical degradation of perovskite solar cells, J. Phys. Chem. Lett.. 2018, 9: 2196.

LI S. and Chen Y., Abnormal negative thermal expansion of sodium: a first-principles discovery at high pressures, Phys. Rev. B. 2017, 96: 134104.

LI S., WANG C. and Chen Y., Anharmonic lattice dynamics of bcc sodium under high pressures, Phys. Chem. Chem. Phys.. 2018, 20: 14647.

LI S., Wang Y., Wang H. and Chen Y., Mechanical failure of graphene and the anharmonic phonon coupling mechanisms, Carbon. 2018, 126: 404.

LI S. and Chen Y., Strain engineering of the lattice thermal transport of monolayer h-BN, Nano-Mechanical Interfaces Gordon Research Conference, Hong Kong. 2017.

Li B., Wang H., Kawakita Y., Zhang Q., Feygenson M., YU H., Wu D., Ohara K., Kikuchi T., Shibata K., Yamada T., Ning X.K., Chen Y., He J.Q., Vaknin D., Wu R.Q., Nakajima K. and Kanatzidis M.G., Liquid-like thermal conduction in intercalated layered crystalline solids, Nature Mater.. 2018, 17: 226.

Li J., Zhang X., Chen Z., Lin S., Li W., Witting I.T., Faghaninia A., Chen Y., Jain A., Chen L., Snyder G.J. and Pei Y., Low-symmetry rhombohedral GeTe thermoelectrics, Joule. 2018, 2: 976.

Li J., Chen Z., Zhang X., YU H., Wu Z., Xie H., Chen Y. and Pei Y., Simultaneous optimization of carrier concentration and alloy scattering for ultrahigh performance GeTe thermoelectrics, Adv. Sci.. 2017, 4: 1700341.

Lin S., Li W., LI S., Zhang X., Chen Z., Xu Y., Chen Y. and Pei Y., High thermoelectric performance of Ag9GaSe6 enabled by low cutoff frequency of acoustic phonons, Joule. 2017, 1: 816.

Ma D., Ju W., Tang Y. and Chen Y., First-principles study of the small molecule adsorption on the InSe monolayer, Appl. Surf. Sci.. 2017, 426: 244.

Qin S.J., Shang J.X., Wang F.H. and Chen Y., Symmetrical tilt grain boundary engineering of NiTi shape memory alloy: an atomistic insight, Mater. Design. 2017, 137: 361.

Shaikh A.R. and Chen Y., The TMS 2017 146th Annual Meeting and Exhibition, Powder Diffraction. 2017, 32: 217.

Shen J. and Chen Y., Silicon as an unexpected n-type dopant in BiCuSeO thermoelectrics, ACS Appl. Mater. Interfaces. 2017, 9: 27372.

WANG C., Liu Y., Liu S.F., Li B. and Chen Y., Giant phonon tuning effect via pressure-manipulated polar rotation in perovskite MAPbI3, J. Phys. Chem. Lett.. 2018, 9: 3029.

Wang X., Li W., WANG C., Li J., Zhang X., Zhou B., Chen Y. and Pei Y., Single parabolic band transport in p-type EuZn2Sb2 thermoelectrics , Journal of Materials Chemistry A. 2017, 5: 24185.

XIONG F., Zhang X.L., Lin Z. and Chen Y., Ferroelectric engineering of two-dimensional group-IV monochalcogenides: the effects of alloying and strain, J. Materiomics. 2018, 4: 139.

XIONG Z., WANG X., Lee K.H.K., ZHAN X., Chen Y. and Tang J., Thermal transport in supported graphene nanomesh, ACS Appl. Mater. Interfaces. 2018, 10: 9211.

Xu Y., Li W., WANG C., Li J., Chen Z., Lin S., Chen Y. and Pei Y., Performance optimization and single parabolic band behavior of thermoelectric MnTe, Journal of Materials Chemistry A. 2017, 5: 19143.

YU H., Shaikh A.R., XIONG F. and Chen Y., Enhanced out-of-plane electrical transport in n-type SnSe thermoelectrics induced by resonant states and charge delocalization, ACS Appl. Mater. Interfaces. 2018, 10: 9889.

YU H. and Chen Y., Unexpected high-pressure phase of GeTe with an origin of low ionicity and electron delocalization, J. Phys. Chem. C. 2018, 122: 15673.

Zhang X., Chen Y., Yang Z. and Lu Z., Accelerating oxygen reduction on Pt monolayer via substrate compression, J. Phys. D: Appl. Phys.. 2017, 50: 435501.

Zhang X., Yang Z. and Chen Y., Novel two-dimensional ferroelectric PbTe under tension: A first-principles prediction, J. Appl. Phys.. 2017, 122: 064101.

Researcher : Chen YH

Project Title:	Design for manufacturing constrained topology optimization with feature based automatic CAD model reconstruction
Investigator(s):	Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	Direct 3D Printing of Actuators
Investigator(s):	Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	06/2014
Completion Date:	09/2017

Project Title:	Upper torso humanoid robot with highly compliant arms
Investigator(s):	Chen YH, Lam J, Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	Matching Grant for Joint Research
Start Date:	06/2015

Project Title:	Hyper-Redundant robotic arm with omni-directional local joint control
Investigator(s):	Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	06/2015
Completion Date:	06/2018

Project Title:	Upper Torso Humanoid Robot with Highly Compliant Arms
Investigator(s):	Chen YH, Lam J, Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	10/2015

Project Title:	Upper torso humanoid robot with highly compliant arms
Investigator(s):	Chen YH, Lam J, Chen MZ
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	10/2015

Project Title:	Passive controller synthesis with application to low-order mechanical vibration control systems
Investigator(s):	Chen YH, Huang L
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	07/2016

Project Title:	Study on Novel Approaches to Controllable and Variable Stiffness Soft Robotics
Investigator(s):	Chen YH
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	06/2017

List of Research Outputs

YANG Y., Chen Y.H., LI Y., Wang Z. and LI Y., Novel Variable-stiffness robotic fingers with built-in position feedback, Soft Robotics. 2017, 4(4): 338-352.

Researcher : Cheng C

List of Research Outputs

Ngan A.H.W., Cheng C., Kwan K.W. and ZHANG Y., Invited talk at symposium “NM10: Nano-metallic materials by design”, “Redox induced actuation in nanoporous nickel”, MRS 2018 Spring Meeting, April 2-6, 2018, Phoenix, Arizona, USA., 2018.

Researcher : Cheng WC

List of Research Outputs

Liu C.H., Cheng W.C., LI W., MO Z., WU Z., Chan Y.L., Kwan W.K. and Yau H.T., A Computational Fluid Dynamics Study of Street-Level Ventilation in Urban Areas, The 13th OpenFOAM Workshop; June 24 to 29, 2018; Shanghai Jiao Tong University. Shanghai. 2018.

Researcher : Cheung KC

Project Title:	14th World Congress of International Federation of Automatic Control A Fast On-Line Training Algorithm for Neurofuzzy Networks
Investigator(s):	Cheung KC
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	07/1999

Project Title:	A study on the use of fuel cells as replacement for lead-acid batteries in solar-based electrical power generation
Investigator(s):	Cheung KC
Department:	Mechanical Engg
Source(s) of Funding:	Low Budget High Impact Programme
Start Date:	11/2001

Project Title:	A study on solar-powered water electrolysis for hydrogen production
Investigator(s):	Cheung KC
Department:	Mechanical Engg
Source(s) of Funding:	Small Project Funding
Start Date:	11/2002

List of Research Outputs

Li P., Lam J. and Cheung K.C., H_¥ control of periodic piecewise vibration systems with actuator saturation, Journal of Vibration and Control. 2017, 23(20): 3377-3391.

Li P., Lam J. and Cheung K.C., Motion-based active disturbance rejection control for a non-linear full-car suspension system, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 2018, 232(5): 616-631.

MA C., Chen M.Z.Q., Lam J. and Cheung K.C., A novel body frame based approach to aerospacecraft attitude tracking, ISA Transactions. 2017, 70: 228-237.

Researcher : Chow KW

Project Title:	Nonlinear localized modes and their dynamics: applications in hydrodynamics and optics
Investigator(s):	Chow KW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2006

Project Title:	Dissipative localized modes: pulses and fronts in complex Ginzburg - Landau models
Investigator(s):	Chow KW
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	An integrated platform for analysis and surgical training of aneurysms and dissections in major arteries
Investigator(s):	Chow KW, Cheng SWK, Yu ACH, Chan KW
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2011

Project Title:	Higher order nonlinear Schrodinger models in hydrodynamics: propagating modes and rogue waves
Investigator(s):	Chow KW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2014

Project Title:	Stroke and Intracranial Aneurysms: Patient Specific Computational and Phantom Studies
Investigator(s):	Chow KW, Leung GKK, Chan KW, Chan KL
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	03/2014

Project Title:	Fluid-Structure Interaction Analysis of Cerebral Aneurysms: Improved Assessments of Risk Factors
Investigator(s):	Chow KW, Sze KY, Leung GKK, Tsang COA, Mak HKF
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Support Programme (Tier 3)
Start Date:	12/2015

Project Title:	Rogue Waves in Systems with Multiple Waveguides
Investigator(s):	Chow KW
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2016

List of Research Outputs

CHIU T.L., Tang Y.S., Tsang C.O.A., Leung G.K.K. and Chow K.W., A computational hemodynamics analysis on the correlation between energy loss and clinical outcomes for flow diverters treatment of intracranial aneurysm, Journal of Medical and Biological Engineering. 2018, 39(1): 27-42.

CHIU T.L., LIU T., Chan H.N. and Chow K.W., The dynamics and evolution of poles and rogue waves for nonlinear Schrödinger equations, Communications in Theoretical Physics. Chinese Physical Society and IOP Publishing Ltd., 2017, 68: 290-294.

Chan H.N. and Chow K.W., Rogue waves for an alternative system of coupled Hirota equations: Structural robustness and modulation instabilities, Studies in Applied Mathematics. Wiley Periodicals, Inc., 2017, 139(1): 78-103.

Ding E., Chan H.N., Chow K.W., Nakkeeran K. and Malomed B.A., Exact states in waveguides with periodically modulated nonlinearity, A Letters Journal Exploring the Frontiers of Physics. EPLA, 2017, 119: 54002-p1/p5.

LIU T., CHIU T.L., Clarkson P.A. and Chow K.W., A connection between the maximum displacements of rogue waves and the dynamics of poles in the complex plane, CHAOS. AIP Publishing, 2017, 27(9): 091103/7.

Rogers C. and Chow K.W., On modulated NLS-Ermakov systems, Journal of Nonlinear Mathematical Physics. Taylor & Francis, 2017, 24: 61-74.

Researcher : DONG Z

List of Research Outputs

DONG Z., GUO Z., Fu K.C.D., LEE K.H., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., Luk W. and Kwok K.W., Best Poster Paper Award (Merit prize), the 2017 IEEE International Conference on Robotics and Automation (ICRA’17) workshop on Surgical Robots， sponsored by Intuitive Surgical Inc.. 2017.

DONG Z., Kwok K.W., GUO Z. and LEE K.H., US Provisional Patent: Fluid Powered Master-Slave Actuation for MRI-Guided Interventions, US 62/640,302 . 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Best Conference Paper Award, In: 2018 IEEE International Conference on Robotics and Automation (ICRA’18), IEEE International Conference on Robotics and Automation 2018 (ICRA’18). 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., POON W.S., CHAN D.T.M. and Kwok K.W., Compact Design of a Hydraulic Driving Robot for Intra-operative MRI-guided Bilateral Stereotactic Neurosurgery, IEEE Robotics and Automation Letters. 2018, 3(3): 2515-2522.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Finalist for ICRA Best Medical Robotics Paper Award , IEEE International Conference on Robotics and Automation 2018 (ICRA’18) . 2018.

GUO Z., Kwok K.W., DONG Z., LEE K.H., FU H.C. and CHEUNG C.L., US Provisional Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, US 62/623,280 . 2018.

LEE K.H., Fu K.C.D., GUO Z., DONG Z., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., LUK W. and Kwok K.W., MR Safe Robotic Manipulator for MRI-guided Intra-cardiac Catheterization, IEEE/ASME Transactions on Mechatronics. 2018, 23(2): 586-595.

WANG X., LEE K.H., Fu K.C.D., DONG Z., WANG K., FANG G., LEE S., LEE A.P.W. and Kwok K.W., Experimental validation of robot-assisted cardiovascular catheterization: model-based versus model-free control, International Journal of Computer Assisted Radiology and Surgery. 2018, 13(6): 797-804.

Researcher : Ding Z

List of Research Outputs

CHAO Y., MAK S.Y., Kong T., Ding Z. and Shum H.C., Droplet formation at the non-equilibrium water/water (w/w) interface, APS Division of Fluid Dynamics (Fall) 2017. American Physical Society, id.KP1.062.

Chao Y.C., Mak S.Y., Ma Q.M., Wu J., Ding Z., Xu L. and Shum H.C., Emergence of Droplets at the Nonequilibrium All-Aqueous Interface in a Vertical Hele-Shaw Cell, Langmuir. 2018, 34(9): 3030-3036.

Researcher : FAN Y

List of Research Outputs

FAN Y., Buoyancy-driven Flows at the Building and City Scales, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2017, 1-245.

Fan Y., Li Y., Hang J. and WANG K., Diurnal variation of natural convective wall flows and the resulting air change rate in a homogeneous urban canopy layer, Energy and Buildings. 2017, 153: 201-208.

Fan Y., Li Y., Bejan A., Wang Y. and Yang X.A., Horizontal extent of the urban heat dome flow, Scientific Reports. 2017, 7.

Fan Y., Li Y. and Yin S., Interaction of multiple urban heat island circulations under idealised settings, Building and Environment. 2018, 134: 10-20.

Researcher : FANG C

List of Research Outputs

FANG C., HUI T.H., WEI X., SHAO X. and Lin Y., A combined experimental and theoretical investigation on cellular blebbing, Scientific Reports. 2017, 7: 16666.

Researcher : FANG G

List of Research Outputs

WANG X., LEE K.H., Fu K.C.D., DONG Z., WANG K., FANG G., LEE S., LEE A.P.W. and Kwok K.W., Experimental validation of robot-assisted cardiovascular catheterization: model-based versus model-free control, International Journal of Computer Assisted Radiology and Surgery. 2018, 13(6): 797-804.

Researcher : FU HC

List of Research Outputs

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Best Conference Paper Award, In: 2018 IEEE International Conference on Robotics and Automation (ICRA’18), IEEE International Conference on Robotics and Automation 2018 (ICRA’18). 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., POON W.S., CHAN D.T.M. and Kwok K.W., Compact Design of a Hydraulic Driving Robot for Intra-operative MRI-guided Bilateral Stereotactic Neurosurgery, IEEE Robotics and Automation Letters. 2018, 3(3): 2515-2522.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Finalist for ICRA Best Medical Robotics Paper Award , IEEE International Conference on Robotics and Automation 2018 (ICRA’18) . 2018.

GUO Z., Kwok K.W., DONG Z., LEE K.H., FU H.C. and CHEUNG C.L., US Provisional Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, US 62/623,280 . 2018.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., Best Conference Paper Award , the 2017 IEEE International Conference on Real-time Computing and Robotics. 2017.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., FEM-based Soft Robotic Control Framework for Intracavitary Navigation, IEEE International Conference on Real-time Computing and Robotics (RCAR) 2017.

LEE K.H., Fu K.C.D., LEONG C.W.M., CHOW C.K., FU H.C., Althoefer K., Sze K.Y., Yeung C.K. and Kwok K.W., Nonparametric Online Learning Control for Soft Continuum Robot: An Enabling Technique for Effective Endoscopic Navigation, Soft Robotics. 2017, 4(4): 324-337.

Researcher : Fan Y

List of Research Outputs

FAN Y., Buoyancy-driven Flows at the Building and City Scales, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2017, 1-245.

Fan Y., Li Y., Bejan A., Wang Y. and Yang X.A., Horizontal extent of the urban heat dome flow, Scientific Reports. 2017, 7.

Fan Y., Li Y. and Yin S., Interaction of multiple urban heat island circulations under idealised settings, Building and Environment. 2018, 134: 10-20.

Researcher : Feng SPT

Project Title:	Multi-scale investigation of interface dominated multiferroic nanostructures (IDMNS) and exploration of potential applications
Investigator(s):	Feng SPT, Soh AK
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2012

Project Title:	Development of TiO2 Slurry with Functional Metal Oxides or Polymers for Dye-sensitized Solar Cell
Investigator(s):	Feng SPT, Liu F
Department:	Mechanical Engg
Source(s) of Funding:	Platform Research Projects
Start Date:	08/2012

Project Title:	Contact fabrication and its study for high-performance solar thermoelectric generators
Investigator(s):	Feng SPT
Department:	Mechanical Engg
Source(s) of Funding:	Early Career Scheme (ECS)
Start Date:	10/2012

Project Title:	Investigation of electrical conduction enhancement in stable graphite suspensions
Investigator(s):	Feng SPT
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	11/2013

Project Title:	Thermal-charging supercapacitors
Investigator(s):	Feng SPT
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	10/2014

Project Title:	New electrochemical approach to synthesize functional metal nanocrystals and its application in non-enzymatic glucose biosensor
Investigator(s):	Feng SPT, Lee H
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	05/2016
Completion Date:	04/2018

Project Title:	Thermal capacitive electrochemical cycle for converting low-grade heat to electricity
Investigator(s):	Feng SPT
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	09/2016

Project Title:	EMN Meeting on Alloys and Compounds (Energy Materails Nanotechnology); Electrochemical Fabrication of Japonica-like Silver Flowers
Investigator(s):	Feng SPT
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	10/2016

Project Title:	Solution-Based Synthesis of Ultrasmall Nb2O5 Nanoparticles and its application in Dye-Sensitized and Perovskite Solar Cells
Investigator(s):	Feng SPT
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	02/2017

Project Title:	2017 MRS fall meeting & exhibit; Thermal Capacitive Electrochemical Cycle for Converting Low-Grade Heat to Electricity
Investigator(s):	Feng SPT
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	11/2017
Completion Date:	12/2017

Project Title:	Direct Solar Conversion of CO2 to Hydrocarbon Fuels: Development and Application of Earth-abundant CuOx/Fe,Cu-doped Ni(oxy)hydroxide/TiO2 Photocatalysts
Investigator(s):	Feng SPT, Li W
Department:	Mechanical Engg
Source(s) of Funding:	Environment and Conservation Fund
Start Date:	12/2017

Project Title:	Electrochemical ablation of two-dimensional metal diselenide monolayers and their catalytic application for CO2 conversion
Investigator(s):	Feng SPT
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	02/2018

List of Research Outputs

CHANG Y.-.H., LIU C., Rouvimov S., Luo T. and Feng S.P.T., Electrochemical synthesis to convert a Ag film into Ag nanoflowers with high electrocatalytic activity, Chem. Commun.. 2017, 53: 6752-6755.

Huang Y.T., Akhil D.O.D.D.A., Daniel S.C.H.U.L.M.A.N., Amritanand S.E.B.A.S.T.I.A.N., Fu Z.H.A.N.G., Drew B.U.Z.Z.E.L.L., Mauricio T.E.R.R.O.N.E.S. and Feng S.P.T., Anomalous Corrosion of Bulk Transition Metal Diselenides Leading to Stable Monolayers, ACS Applied Materials & Interfaces. 2017.

Kwan K.W., HAU N.Y., Feng S.P.T. and Ngan A.H.W., Electrochemical actuation of nickel hydroxide/oxyhydroxide at sub-volt voltages, Sensors and Actuators B: Chemical. Switzerland, Elsevier Science SA, 2017, 248: 657-664.

Kwan K.W., Li S., Hau N.Y., Li W., Feng S.P.T. and Ngan A.H.W., Light-stimulated actuators based on nickel hydroxide-oxyhydroxide, In: Bradley Nelson, Science Robotics. AAAS, 2018, 3.

LIU C., CHANG Y.-.H., CHEN J. and Feng S.P.T., Electrochemical Synthesis of Cu2O Concave Octahedrons with High-Index Facets and Enhanced Photoelectrochemical Activity , ACS Applied Materials & Interfaces. 2017, 9: 39027-39033.

Lee H., Huang Y.T., Mark H.O.R.N. and Feng S.P.T., Undoped nickel oxide thin films by RF sputter for efficient inverted perovskite solar cells, Scientific Reports. 2018.

TSENG Y.C., LEE H., HAU N.Y., Feng S.P.T. and CHEN C.M., Electrodeposition of Ni on Bi2Te3 and Interfacial Reaction Between Sn and Ni-Coated Bi2Te3, Journal of Electronic Materials. 2018, 47: 27-34.

WANG X. and Feng S.P.T., Thermal Capacitive Electrochemical Cycle on Carbon-Based Supercapacitor for Converting Low-grade Heat to Electricity, Frontiers in Mechanical Engineering. 2017, 3.

Zhai P., Wang Y., LIU C., WANG X. and Feng S.P.T., Electric-Field-Tunable Conductivity in Graphene/Water and Graphene/Ice Systems, Small. 2017, 1701149.

Researcher : Fu KCD

List of Research Outputs

DONG Z., GUO Z., Fu K.C.D., LEE K.H., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., Luk W. and Kwok K.W., Best Poster Paper Award (Merit prize), the 2017 IEEE International Conference on Robotics and Automation (ICRA’17) workshop on Surgical Robots， sponsored by Intuitive Surgical Inc.. 2017.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., Best Conference Paper Award , the 2017 IEEE International Conference on Real-time Computing and Robotics. 2017.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., FEM-based Soft Robotic Control Framework for Intracavitary Navigation, IEEE International Conference on Real-time Computing and Robotics (RCAR) 2017.

LEE K.H., Fu K.C.D., GUO Z., DONG Z., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., LUK W. and Kwok K.W., MR Safe Robotic Manipulator for MRI-guided Intra-cardiac Catheterization, IEEE/ASME Transactions on Mechatronics. 2018, 23(2): 586-595.

LEE K.H., Fu K.C.D., LEONG C.W.M., CHOW C.K., FU H.C., Althoefer K., Sze K.Y., Yeung C.K. and Kwok K.W., Nonparametric Online Learning Control for Soft Continuum Robot: An Enabling Technique for Effective Endoscopic Navigation, Soft Robotics. 2017, 4(4): 324-337.

WANG X., LEE K.H., Fu K.C.D., DONG Z., WANG K., FANG G., LEE S., LEE A.P.W. and Kwok K.W., Experimental validation of robot-assisted cardiovascular catheterization: model-based versus model-free control, International Journal of Computer Assisted Radiology and Surgery. 2018, 13(6): 797-804.

Researcher : GAN K

List of Research Outputs

GAN K. and Ngan A.H.W., The unusual size effect of eutectic Sn/Pb alloys in the micro regime: experiments and modeling, Acta Materialia. 2018, 151: 282-292.

Researcher : GONG Z

List of Research Outputs

GONG Z., Szczesny S.E., Caliari S.R., Charrier E.E., Chaudhuri O., Cao X., Lin Y., Mauck R.L., Janmey P.A., Burdick J.A. and Shenoy V.B., Matching Material and Cellular Timescales Maximizes Cell Spreading on Viscoelastic Substrates, Proceedings of the National Academy of Sciences. 2018.

GONG Z., Physical Understanding of Cells and Cell-ECM Interactions, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2017, 1-192.

Researcher : GUAN Q

List of Research Outputs

GUAN Q., Novel Multifunctional Nanodevices for Cancer Diagnosis and Therapy, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-317.

Researcher : GUO L

List of Research Outputs

GUO L. and Wang M., Advanced tissue engineering scaffolds encapsulated with growth factor for regenerating gastrointestinal (GI) tract, HKU-Osaka University Joint Symposium on Materials Research. Hong Kong, 2017, 1 pp.

GUO L. and Wang M., Advanced tissue engineering scaffolds incorporated with theranostics for cancer cell targeting and photothermal therapy, 42nd International Conference and Exposition on Advanced Ceramics and Composites (ICACC’18). Daytona Beach, FL, USA, 2018, 1 pp.

GUO L., Best Presentation Award for Young Investigator, 8th WACBE World Congress on Bioengineering. 2017.

GUO L., Zheng L. and Wang M., Cancer cell targeting and internalization of theranostics released from advanced tissue engineering scaffolds, WACBE 8th World Congress on Bioengineering. Hong Kong, 2017, 1 pp.

GUO L. and Wang M., Cancer cell targeting and photothermal therapy of theranostics from multifunctional tissue engineering scaffolds, Materials Science & Technology 2017 Conference & Exhibition. Pittsburg, USA, 2017, 1 pp.

GUO L., Champion of the Young Persons’ Lecture Competition, Young Persons’ Lecture Competition, Institute of Materials, Minerals and Mining (Hong Kong Branch). 2018.

GUO L. and Wang M., Controlled release of au-based theranostics from microspherical delivery vehicle and their provision of photothermal therapy, National Biomaterials Congress of the Chinese Society for Biomaterials. Nanchang, China, 2017, 1 pp.

GUO L. and Wang M., Fabrication and evaluation of advanced tissue engineering scaffolds with functions for cancer detection and treatment, National Biomaterials Congress of the Chinese Society for Biomaterials. Nanchang, China, 2017, 1 pp.

GUO L. and Wang M., Multiple functions of cancer targeting, imaging and photothermal therapy by Au-based theranostics released from advanced tissue engineering scaffolds, Society For Biomaterials 2018 Annual Meeting. Atlanta, GA, USA, 2018, 1 pp.

GUO L., Zheng L. and Wang M., Photothermal therapy of theranostics released from microspherical delivery vehicle, WACBE 8th World Congress on Bioengineering. Hong Kong, 2017, 1 pp.

GUO L. and Wang M., Theranostics-embedded and growth factor-incorporated multifunctional scaffolds for post-surgery cancer patients, Society For Biomaterials 2018 Annual Meeting. Atlanta, GA, USA, 2018, 1 pp.

GUO L. and Wang M., Theranostics-embedded multifunctional tissue engineering scaffolds for cancer detection and treatment, Materials Research Society Fall Meeting. Boston, USA, 2017, 1 pp.

Guo L., Zheng L. and Wang M., Cancer Cell Targeting and Internalization of Theranostics Released from Advanced Tissue Engineering Scaffolds, 8th WACBE World Congress on Bioengineering. 2017.

Guo L., Zheng L. and Wang M., Photothermal Therapy of Theranostics Released from Microspherical Delivery Vehicle, 8th WACBE World Congress on Bioengineering. 2017.

Wang M., GUO L. and SUN H., Manufacturing technologies for biomaterials, Reference Module in Biomedical Sciences. The Netherlands, Elsevier, 2018.

Researcher : GUO Z

List of Research Outputs

DONG Z., GUO Z., Fu K.C.D., LEE K.H., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., Luk W. and Kwok K.W., Best Poster Paper Award (Merit prize), the 2017 IEEE International Conference on Robotics and Automation (ICRA’17) workshop on Surgical Robots， sponsored by Intuitive Surgical Inc.. 2017.

DONG Z., Kwok K.W., GUO Z. and LEE K.H., US Provisional Patent: Fluid Powered Master-Slave Actuation for MRI-Guided Interventions, US 62/640,302 . 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Best Conference Paper Award, In: 2018 IEEE International Conference on Robotics and Automation (ICRA’18), IEEE International Conference on Robotics and Automation 2018 (ICRA’18). 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., POON W.S., CHAN D.T.M. and Kwok K.W., Compact Design of a Hydraulic Driving Robot for Intra-operative MRI-guided Bilateral Stereotactic Neurosurgery, IEEE Robotics and Automation Letters. 2018, 3(3): 2515-2522.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Finalist for ICRA Best Medical Robotics Paper Award , IEEE International Conference on Robotics and Automation 2018 (ICRA’18) . 2018.

GUO Z., Kwok K.W., DONG Z., LEE K.H., FU H.C. and CHEUNG C.L., US Provisional Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, US 62/623,280 . 2018.

Kwok K.W., CHEUNG C.L., HO J.D.-.L., GUO Z., Chang H.C.C. and Vardhanabhuti V., US Provisional Patent: MRI Tracking Device Design, Fabrication, and Methods of use for MRI-Guided Robotic System, US 62/640,798 . 2018.

LEE K.H., Fu K.C.D., GUO Z., DONG Z., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., LUK W. and Kwok K.W., MR Safe Robotic Manipulator for MRI-guided Intra-cardiac Catheterization, IEEE/ASME Transactions on Mechatronics. 2018, 23(2): 586-595.

Researcher : HAU NY

List of Research Outputs

Kwan K.W., HAU N.Y., Feng S.P.T. and Ngan A.H.W., Electrochemical actuation of nickel hydroxide/oxyhydroxide at sub-volt voltages, Sensors and Actuators B: Chemical. Switzerland, Elsevier Science SA, 2017, 248: 657-664.

Kwan K.W., Li S., Hau N.Y., Li W., Feng S.P.T. and Ngan A.H.W., Light-stimulated actuators based on nickel hydroxide-oxyhydroxide, In: Bradley Nelson, Science Robotics. AAAS, 2018, 3.

TSENG Y.C., LEE H., HAU N.Y., Feng S.P.T. and CHEN C.M., Electrodeposition of Ni on Bi2Te3 and Interfacial Reaction Between Sn and Ni-Coated Bi2Te3, Journal of Electronic Materials. 2018, 47: 27-34.

Researcher : HE S

List of Research Outputs

HE S., Deformation Mechanism of Low Carbon Bainitic Steels, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2017, 1-118.

HE S., He B., Zhu K. and Huang M., Evolution of dislocation density in bainitic steel: Modeling and experiments, Acta Materialia. 2018, 149: 46-56.

HE S., He B., ZHU K.Y. and Huang M., On the correlation among dislocation density, lath thickness and yield stress of bainite, Acta Materialia. 2017, 135: 382-389.

He B., Huang B., HE S., Qi Y., Yen H. and Huang M., Increasing yield strength of medium Mn steel by engineering multiple strengthening defects, Materials Science and Engineering: A. 2018, 724: 11-16.

Researcher : HO JD-L

List of Research Outputs

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Best Conference Paper Award, In: 2018 IEEE International Conference on Robotics and Automation (ICRA’18), IEEE International Conference on Robotics and Automation 2018 (ICRA’18). 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., POON W.S., CHAN D.T.M. and Kwok K.W., Compact Design of a Hydraulic Driving Robot for Intra-operative MRI-guided Bilateral Stereotactic Neurosurgery, IEEE Robotics and Automation Letters. 2018, 3(3): 2515-2522.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Finalist for ICRA Best Medical Robotics Paper Award , IEEE International Conference on Robotics and Automation 2018 (ICRA’18) . 2018.

Kwok K.W., CHEUNG C.L., HO J.D.-.L., GUO Z., Chang H.C.C. and Vardhanabhuti V., US Provisional Patent: MRI Tracking Device Design, Fabrication, and Methods of use for MRI-Guided Robotic System, US 62/640,798 . 2018.

Researcher : HO YK

List of Research Outputs

HO Y.K. and Liu C.H., Street-Level Ventilation in Hypothetical Urban Areas, Atmosphere. 2017, 8: 124.

Liu C.H., WU Z. and HO Y.K., Large-eddy simulation of reactive plume dispersion over hypothetical urban areas, In: M. Salvetti, Direct and Large-Eddy Simulation XI. 2018.

Researcher : HU S

List of Research Outputs

HU S., Numerical Study on the Power Generation Capacity of a Solar Chimney System with Diffuser-type Chimney and Low-grade Waste Heat, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-253.

HU S., Leung Y.C.D. and Chan J.C.Y., Numerical modeling and comparison of the performance of diffusor-type solar chimneys for power generation, Applied Energy. U.K., Elsevier Science Ltd., 2017, 204: 948-957.

HU S. and Leung Y.C.D., Numerical modeling of the compressible airflow in a solar-waste-heat chimney power plant, Energy Procedia. Netherlands, Elsevier BV, 2017, 142: 642-647.

Wang Y., Leung Y.C.D. and HU S., Durability and stability of vapor-feed microfluidic fuel cells: a preliminary study, Energy Procedia. Netherlands, Elsevier BV, 2017, 142: 1340-1345.

Researcher : HU Y

List of Research Outputs

Sze K.Y. and HU Y., Assumed natural strain and stabilized quadrilateral Lobatto spectral elements for C⁰ plate/shell analysis, International Journal for Numerical Methods in Engineering. 2017, 111: 403-446.

Researcher : HUANG N

List of Research Outputs

HUANG N., Li C.W. and Chan B.P., Multiphoton 3D micro-printing of protein micro-patterns with spatially controlled heterogeneity - A platform for single cell matrix niche studies, Advanced Biosystems. 2018, 1-13.

MA J., WANG X., Li C.W., HUANG N. and Chan B.P., Multiphoton fabrication of functionalized protein micropatterns - An in vitro model for study on cell-matrix interactions in human mesenchymal stem cells, ISSCR 2017, 4-8 Aug 2018, Boston, USA. 2017.

Ma J.N., Li C.W., HUANG N., WANG X., TONG M., Ngan A.H.W. and Chan B.P., Multiphoton Fabrication of Fibronectin-Functionalized Protein Micropatterns: Stiffness-Induced Maturation of Cell–Matrix Adhesions in Human Mesenchymal Stem Cells, ACS Applied Materials & Interfaces. 2017.

TONG M., HUANG N., Ngan A.H.W., Du Y.N. and Chan B.P., Preferential sensing and response to microenvironment stiffness of human dermal fibroblast cultured on protein micropatterns fabricated by 3D multiphoton biofabrication, Scientific Reports. 2017, 12402.

Researcher : HUANG Y-T

List of Research Outputs

HUANG Y.-.T., Development of Nb-TiO₂/Nb₂O₅ Functional Photoanode and Flexible Metal-mesh Cathode for Dye-sensitized Solar Cells and Perovskite Solar Cells, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2017, 1-171.

Researcher : HUI TH

List of Research Outputs

FANG C., HUI T.H., WEI X., SHAO X. and Lin Y., A combined experimental and theoretical investigation on cellular blebbing, Scientific Reports. 2017, 7: 16666.

HUI T.H., WEI X. and Lin Y., Interrogating the Electromechanical Regulation of Cellular Volume at the Single-Cell Level, Biophysical Journal. 2018, 114: 2030-2031.

YAN Z., HUI T.H., Fong H.W., SHAO X., Cho W.C., Ngan K.C., Yip T.C. and Lin Y., An electroporation platform for Erlotinib resistance screening in living non-small cell lung cancer (NSCLC) cells, Biomedical Physics & Engineering Express. 2018, 4: 027001.

Researcher : Hau NY

List of Research Outputs

Kwan K.W., Li S., Hau N.Y., Li W., Feng S.P.T. and Ngan A.H.W., Light-stimulated actuators based on nickel hydroxide-oxyhydroxide, In: Bradley Nelson, Science Robotics. AAAS, 2018, 3.

Researcher : He B

List of Research Outputs

HE S., He B., Zhu K. and Huang M., Evolution of dislocation density in bainitic steel: Modeling and experiments, Acta Materialia. 2018, 149: 46-56.

HE S., He B., ZHU K.Y. and Huang M., On the correlation among dislocation density, lath thickness and yield stress of bainite, Acta Materialia. 2017, 135: 382-389.

He B., Hu B., Yen H., Cheng G., Wang Z., Luo H. and Huang M., High dislocation density–induced large ductility in deformed and partitioned steels, Science. 2017, 357: 1029-1032.

He B., Huang B., HE S., Qi Y., Yen H. and Huang M., Increasing yield strength of medium Mn steel by engineering multiple strengthening defects, Materials Science and Engineering: A. 2018, 724: 11-16.

He B., LIANG Z. and Huang M., Nanoindentation investigation on the initiation of yield point phenomenon in a medium Mn steel, Scripta Materialia. 2018, 150: 134-138.

He B. and Huang M., Simultaneous Increase of Both Strength and Ductility of Medium Mn Transformation-Induced Plasticity Steel by Vanadium Alloying, Metallurgical and Materials Transactions A. 2018, 49: 1433–1438.

LIU L., He B., Cheng G., Yen H. and Huang M., Optimum properties of quenching and partitioning steels achieved by balancing fraction and stability of retained austenite, Scripta Materialia. 2018, 150: 1-6.

LIU L., He B. and Huang M., The Role of Transformation-Induced Plasticity in the Development of Advanced High Strength Steels, Advanced Engineering Materials. 2018, 20: 1701083.

Researcher : He H

List of Research Outputs

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Best Conference Paper Award, In: 2018 IEEE International Conference on Robotics and Automation (ICRA’18), IEEE International Conference on Robotics and Automation 2018 (ICRA’18). 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., POON W.S., CHAN D.T.M. and Kwok K.W., Compact Design of a Hydraulic Driving Robot for Intra-operative MRI-guided Bilateral Stereotactic Neurosurgery, IEEE Robotics and Automation Letters. 2018, 3(3): 2515-2522.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Finalist for ICRA Best Medical Robotics Paper Award , IEEE International Conference on Robotics and Automation 2018 (ICRA’18) . 2018.

Wang Z., Xie T., Huang W., Pendkar N., He H., Ding W. and Mao Y., First Place Winner of Enginnovate 2018, HKUEAA. 2018.

Wang Z., Li J., Xie T., Huang W., He H., Pendkar N., Ding W. and Mao Y., Hong Kong X Best FYP Award (Dental Surgical Robot), Hong Kong X Tech. 2018.

Researcher : Huang L

Project Title:	The suppression of multiple tones for small axial-flow fans
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	12/2005

Project Title:	Blower noise source identification and mitigation for notebook PCs
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	Intel Corporation - General Award
Start Date:	05/2007

Project Title:	Electromagnetic Absorption of Sound
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	Development of an Environmentally Friendly Sound Absorption Panel for Broadband Noise Reduction Purpose
Investigator(s):	Huang L
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	12/2011

List of Research Outputs

Fong D.Y.T., Wong J.Y.H. and Huang L., Effect of noise tolerance on non-restorative sleep: a population-based study in Hong Kong, BMJ Open . 2018, 8(3).

JIANG C. and Huang L., Characterization of low-frequency acoustic wave propagation through a periodic corrugated waveguide, Journal of Sound and Vibration. 2018, 418: 79-99.

Ren S.W., Ao Q.B., Meng H., Xin F.X., Huang L., Zhang C.Z. and Lu T.J., A semi-analytical model for sound propagation in sintered fiber metals, Composites Part B: Engineering. 2017, 126: 17-26.

Tang Y.F., Ren S.W., Meng H., Xin F.X., Huang L., Chen T.N., Zhang C.Z. and Lu T.J., Hybrid acoustic metamaterial as super absorber for broadband low-frequency sound, Scientific Reports. 2017, 7: 43340.

WANG C. and Huang L., Acoustic analysis of two small axial-flow fans in series, Noise Control Engineering Journal. 2017, 65(4): 320-335.

WANG C. and Huang L., Theoretical acoustic prediction of the aerodynamic interaction for contra-rotating fans, AIAA Journal. 2018, 56: 1855-1866.

ZHANG Y. and Huang L., Electroacoustic control of Rijke tube instability, Journal of Sound and Vibration. 2017, 409: 131-144.

ZHANG Y. and Huang L., Realization of resonance of a diaphragm at any desired frequency, Journal of Mechanics. 2018, 34(1): 29-34.

Researcher : Huang M

Project Title:	Ultrahigh strength Twinning Induced Plasticity (TWIP) steels strengthened by ultrafine-grained structure and intermetallic nanoprecipitates
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:	07/2011

Project Title:	Managing twin behaviour in small-sized crystals
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Early Career Scheme (ECS)
Start Date:	01/2013

Project Title:	Strong and Ductile Nanotwinned Alloys
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2014

Project Title:	Nanotwinned Steels for Structural Applications
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Platform Research Projects
Start Date:	03/2014

Project Title:	Nanotwinned Steels for Structural Applications
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	08/2014

Project Title:	Nanotwinned Steels for Structural Applications
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	10/2014

Project Title:	Martensitic transformation in nano- and micron-sized fcc crystals
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2015

Project Title:	Ultrastrong nanostructured steel with unexpected large tensile ductility
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	08/2016

Project Title:	Hydrogen embrittlement of lightweight automotive steels
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	03/2017

Project Title:	Development Of A New Nickel And Nitrogen Free Austenitic Stainless Steel And Its Related Powder Injection Moulding Method For Wearable Devices Applications
Investigator(s):	Huang M, He B
Department:	Mechanical Engg
Source(s) of Funding:	Guangdong-Hong Kong Technology Cooperation Funding Scheme
Start Date:	08/2017

Project Title:	Development Of A New Nickel And Nitrogen Free Austenitic Stainless Steel And Its Related Powder Injection Moulding Method For Wearable Devices Applications
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	11/2017

Project Title:	Development Of A New Nickel And Nitrogen Free Austenitic Stainless Steel And Its Related Powder Injection Moulding Method For Wearable Devices Applications
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Fund Internship Programme
Start Date:	03/2018

Project Title:	TMS2018; Deformation twins are not important for TWIP steels
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	URC/CRCG - Conference Support for Teaching Staff
Start Date:	03/2018
Completion Date:	03/2018

Project Title:	Combining a gradient structure with transformation- and twinning-induced plasticity effects to achieve high strength and high ductility in alloys
Investigator(s):	Huang M
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research
Start Date:	06/2018

List of Research Outputs

Ding R., Dai Z., Huang M., Yang Z., Zhang C. and Chen H., Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel, Acta Materialia. 2018, 147: 59-69.

HE S., He B., Zhu K. and Huang M., Evolution of dislocation density in bainitic steel: Modeling and experiments, Acta Materialia. 2018, 149: 46-56.

HE S., He B., ZHU K.Y. and Huang M., On the correlation among dislocation density, lath thickness and yield stress of bainite, Acta Materialia. 2017, 135: 382-389.

He B., Hu B., Yen H., Cheng G., Wang Z., Luo H. and Huang M., High dislocation density–induced large ductility in deformed and partitioned steels, Science. 2017, 357: 1029-1032.

He B., Huang B., HE S., Qi Y., Yen H. and Huang M., Increasing yield strength of medium Mn steel by engineering multiple strengthening defects, Materials Science and Engineering: A. 2018, 724: 11-16.

He B., LIANG Z. and Huang M., Nanoindentation investigation on the initiation of yield point phenomenon in a medium Mn steel, Scripta Materialia. 2018, 150: 134-138.

He B. and Huang M., Simultaneous Increase of Both Strength and Ductility of Medium Mn Transformation-Induced Plasticity Steel by Vanadium Alloying, Metallurgical and Materials Transactions A. 2018, 49: 1433–1438.

Huang M., Alloy design by dislocation engineering, International Conference on Plasticity, Damage, and Fracture (Plasticity 2018). 2018.

Huang M., Member of Editorial Board, JOM. Springer, 2018.

Huang M., Member of Editorial Board, Journal of Materials Science and Technology. Elsvier, 2018.

LIU L., He B., Cheng G., Yen H. and Huang M., Optimum properties of quenching and partitioning steels achieved by balancing fraction and stability of retained austenite, Scripta Materialia. 2018, 150: 1-6.

LIU L., He B. and Huang M., The Role of Transformation-Induced Plasticity in the Development of Advanced High Strength Steels, Advanced Engineering Materials. 2018, 20: 1701083.

LUO Z. and Huang M., Revisit the role of deformation twins on the work-hardening behaviour of twinning-induced plasticity steels, Scripta Materialia. 2018, 142: 28-31.

LUO Z., Liu R., Wang X. and Huang M., The effect of deformation twins on the quasi-cleavage crack propagation in twinning-induced plasticity steels, Acta Materialia. 2018, 150: 59-68.

NIMAGA O.G., Cheng G.J., Yen H.W. and Huang M., Large strain burst induced by martensitic transformation in austenitic micropillars, Scripta Materialia. 2017, 137: 64-68.

Wang X., LIU L., Liu R. and Huang M., Benefits of Intercritical Annealing in Quenching and Partitioning Steel, Metallurgical and Materials Transactions A. 2018, 49: 1460–1464.

ZHOU P., LIANG Z. and Huang M., Microstructural evolution of a nanotwinned steel under extremely high-strain-rate deformation, Acta Materialia. 2018, 149: 407-415.

Researcher : Huang YT

List of Research Outputs

Huang Y.T., Akhil D.O.D.D.A., Daniel S.C.H.U.L.M.A.N., Amritanand S.E.B.A.S.T.I.A.N., Fu Z.H.A.N.G., Drew B.U.Z.Z.E.L.L., Mauricio T.E.R.R.O.N.E.S. and Feng S.P.T., Anomalous Corrosion of Bulk Transition Metal Diselenides Leading to Stable Monolayers, ACS Applied Materials & Interfaces. 2017.

Lee H., Huang Y.T., Mark H.O.R.N. and Feng S.P.T., Undoped nickel oxide thin films by RF sputter for efficient inverted perovskite solar cells, Scientific Reports. 2018.

Researcher : JI X

List of Research Outputs

JI X., Zhou P., Zhong L., Xu A., Tsang C.O.A. and Chan K.L., Smart surgical catheter for C-reactive protein sensing based on an imperceptible organic transistor, Advanced Science. 2018, Epub on 2018-05-03.

Researcher : JIANG C

List of Research Outputs

JIANG C. and Huang L., Characterization of low-frequency acoustic wave propagation through a periodic corrugated waveguide, Journal of Sound and Vibration. 2018, 418: 79-99.

JIANG C., On the Acoustic Analysis and Design of Porous Materials for Low-frequency Noise Control, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-189.

Researcher : KANG Z

List of Research Outputs

KANG Z., Multiphase Transport: Microparticle Morphology and Heat Transfer, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2017, 1-272.

Researcher : KHAN A

List of Research Outputs

Cai J., Zhang C., Khan A., Liang C. and Li W., Highly transparent and flexible polyaniline mesh sensor for chemiresistive sensing of ammonia gas, RSC Advances. 2018, 8(10): 5312-5320.

KHAN A., Novel Embedded Metal-mesh Transparent Electrodes: Vacuum-free Fabrication Strategies and Applications in Flexiable Electronic devices, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2017, Varous pagings.

Li W., CAI J., ZHANG C., KHAN A., Liang C., LI S., ZHU Z. and MIN S., Solution-Processed Metallic Micro and Nanostructures for Transparent Electrodes and Plasmonic Sensors, The 17th IEEE International Conference on Nanotechnology (IEEE-NANO 2017). 2017, FrO1O3.1.

Xiong Z., CHEN J.W., WANG J., Cai Y., LIU X., Su Z., Xu S., Khan A., Li W., Bian J.C., Li G.M., Huang M.Y. and Tang J., Electrochemical half-reaction-assisted sub-bandgap photon sensing in a graphene hybrid phsotodetector, NPG Asia Materials. Nature Publishing Group, 2017, 9: e436:1-7.

Zhang C., Khan A., Cai J., Liang C., Liu Y.J., Deng J., Huang S., Li G. and Li W., Stretchable Transparent Electrodes with Solution-processed Regular Metal Mesh for Electroluminescent Light-emitting Film, ACS Applied Materials & Interfaces. 2018.

Researcher : KWOK YH

List of Research Outputs

KWOK Y.H., Wang Y., Tsang C.H.A. and Leung Y.C.D., Graphene-carbon nanotube composite aerogel with Ru@Pt nanoparticle as a porous electrode for direct methanol microfluidic fuel cell, Applied Energy. U.K., Elsevier Science Ltd., 2018, 217: 258-265.

Leung Y.C.D., Yu C.L., Lam C.K.G., KWOK Y.H. and Cheng W.K., Bioethanol: Is it a suitable biofuel for Hong Kong for reducing its vehicular emissions and carbon footprint, Energy Procedia. Netherlands, Elsevier BV, 2017, 142: 2892-2897.

Researcher : Khan A

List of Research Outputs

Cai J., Zhang C., Khan A., Liang C. and Li W., Highly transparent and flexible polyaniline mesh sensor for chemiresistive sensing of ammonia gas, RSC Advances. 2018, 8(10): 5312-5320.

Researcher : Kim J

Project Title:	Nano-precision 3D printing of functional materials
Investigator(s):	Kim J
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research for New Staff
Start Date:	11/2016

Project Title:	High throughput and nanoscale meniscus-guided 3D printing
Investigator(s):	Kim J
Department:	Mechanical Engg
Source(s) of Funding:	Early Career Scheme (ECS)
Start Date:	01/2018

List of Research Outputs

CHEN M., XU Z., Kim J.H., Seol S.K. and Kim J., Meniscus-on-Demand Parallel 3D Nanoprinting, ACS Nano. 2018, 12: 4172-4177.

Kim J., Meniscus-Guided 3D Nano-Printing, BEYOND! 2D. 2017.

Kim J., Meniscus-on-Demand Parallel 3D Nanoprinting, Research Seminar, Korea Electrotechnology Research Institute. 2018.

Kim J., Choudhury U., Jeong H.H. and Fischer P., Nanodiamonds That Swim, Advanced Materials. 2017, 29: 1701024.

Kim J., Nanodiamonds That Swim, Departmental Seminar, Pusan National University. 2018.

Kim J., Nanodiamonds that swim, Department Seminar, Chemical Engineering, POSTECH, Pohang, Korea. 2017.

Kim J., Scanning-aperture manipulation of nanomatter in fluids, 5th Thermal Probe Workshop. 2018.

Kim J., The scanned pipette: a nanotechnological tool for nanomaterials manipulation, Department Seminar, Materials science and engineering, Ajou University, Suwon, Korea. 2017.

Yazgan T., Kim J., Liu H.W. and Sandoghdar V., Levitated Plasmonic Nanoantennas in an Aqueous Environment, ACS Nano. 2017, 11: 7674-7678.

Researcher : Ko WLM

List of Research Outputs

Ko W.L.M., Translational Ocular Biomechanics in Glaucoma: Theory Overview, Joint Research Seminar – New Technologies in Civil and Biomechanical Engineering, Nazarbayev University, Astana, Kazakhstan. 2017.

Minh N.H., Kim J., Zhang D., Thiyya S.K., Jamwal P., Ko W.L.M. and Khairaliyev S., Development of a full-scale testing facility for buried pipeline-soil interaction behaviour in Kazakhstan, 19th International Conference on Soil Mechanics and Geotechnical Engineering. 2017, 1891-1894.

Researcher : Kong T

List of Research Outputs

CHAO Y., MAK S.Y., Kong T., Ding Z. and Shum H.C., Droplet formation at the non-equilibrium water/water (w/w) interface, APS Division of Fluid Dynamics (Fall) 2017. American Physical Society, id.KP1.062.

Kong T., Stone H.A., Wang L. and Shum H.C., Dynamic regimes of electrified liquid filaments, Proceedings of the National Academy of Sciences of the United States of America. 2018, 115(24): 6159-6164.

Researcher : Kou X

Project Title:	Doris Zimmern HKU-Cambridge Hughes Hall Fellowships 2010-11
Investigator(s):	Kou X
Department:	Mechanical Engg
Source(s) of Funding:	Doris Zimmern HKU-Cambridge Hughes Hall Fellowships
Start Date:	09/2010

Researcher : Kwan KW

List of Research Outputs

Kwan K.W., HAU N.Y., Feng S.P.T. and Ngan A.H.W., Electrochemical actuation of nickel hydroxide/oxyhydroxide at sub-volt voltages, Sensors and Actuators B: Chemical. Switzerland, Elsevier Science SA, 2017, 248: 657-664.

Kwan K.W., Li S., Hau N.Y., Li W., Feng S.P.T. and Ngan A.H.W., Light-stimulated actuators based on nickel hydroxide-oxyhydroxide, In: Bradley Nelson, Science Robotics. AAAS, 2018, 3.

Ngan A.H.W., Cheng C., Kwan K.W. and ZHANG Y., Invited talk at symposium “NM10: Nano-metallic materials by design”, “Redox induced actuation in nanoporous nickel”, MRS 2018 Spring Meeting, April 2-6, 2018, Phoenix, Arizona, USA., 2018.

Ngan A.H.W., Kwan K.W. and WU R., Invited talk, “When mechanics meets chemistry– novel nickel-hydroxide/oxyhydroxide thin-film actuating material that can be triggered by both light and electricity”, International Workshop on Grain Boundaries and Dislocations through High Performance Metals and Alloys, June 21-22, 2018, Beijing University of Technology, Beijing, China., 2018.

Ngan A.H.W., Kwan K.W. and ZHANG Y., “High performing electrochemical actuators made from nickel hydroxide”, Keynote Talk, 2018 Symposium for the Promotion of Applied Research Collaboration in Asia (SPARCA 2015), Feb. 10-12, 2018, Okinawa, Japan., 2018.

Researcher : Kwok KW

Project Title:	Interventional Imaging and Robotic Systems
Investigator(s):	Kwok KW
Department:	Mechanical Engg
Source(s) of Funding:	Start-up Allowance for Returning Croucher Award Recipients
Start Date:	08/2014

Project Title:	Advanced Human-Robot Cooperative Control Interfaces for Tele-operated Anthropomorphic Manipulation Systems
Investigator(s):	Kwok KW, Lam J
Department:	Mechanical Engg
Source(s) of Funding:	Seed Fund for Basic Research for New Staff
Start Date:	01/2015

Project Title:	MRI-guided and Robot-assisted Catheterization for Cardiac Electrophysiological Intervention
Investigator(s):	Kwok KW
Department:	Mechanical Engg
Source(s) of Funding:	Early Career Scheme (ECS)
Start Date:	01/2016

Project Title:	Development of Soft Robotic Colonoscope for Non-invasive Diagnostic and Therapeutic Colonoscopy
Investigator(s):	Kwok KW, Law WL, Lam J, Sze KY, Cheung CL, Chow CKM, Leong CWM
Department:	Mechanical Engg
Source(s) of Funding:	Innovation and Technology Support Programme (Tier 2)
Start Date:	05/2016

Project Title:	King's/HKU Fellowship Awards 2016-17
Investigator(s):	Kwok KW
Department:	Mechanical Engg
Source(s) of Funding:	King's/HKU Fellowship Awards
Start Date:	06/2016

Project Title:	High-performance MRI-guided Robotic System for Functional and Stereotactic Neurosurgery
Investigator(s):	Kwok KW, Roberts RC
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2017

Project Title:	MRI-guided Soft Continuum Robotic System for Transoral Laser Microsurgery
Investigator(s):	Kwok KW, Tsoi KH, Wong KKY
Department:	Mechanical Engg
Source(s) of Funding:	General Research Fund (GRF)
Start Date:	01/2018

List of Research Outputs

DONG Z., GUO Z., Fu K.C.D., LEE K.H., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., Luk W. and Kwok K.W., Best Poster Paper Award (Merit prize), the 2017 IEEE International Conference on Robotics and Automation (ICRA’17) workshop on Surgical Robots， sponsored by Intuitive Surgical Inc.. 2017.

DONG Z., Kwok K.W., GUO Z. and LEE K.H., US Provisional Patent: Fluid Powered Master-Slave Actuation for MRI-Guided Interventions, US 62/640,302 . 2018.

Fan S., Chan A., Au S., LEONG C.W.M., CHOW C.K., Fan Y.T., Wong R., Chan S., Ng S.K., Lee A.P.W. and Kwok K.W., Personalised Anaesthesia: 3D Printing in Patient with Facial Deformity and Difficult Airway, British Journal of Anaesthesia. 2018, 121(3): 675-678.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Best Conference Paper Award, In: 2018 IEEE International Conference on Robotics and Automation (ICRA’18), IEEE International Conference on Robotics and Automation 2018 (ICRA’18). 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., POON W.S., CHAN D.T.M. and Kwok K.W., Compact Design of a Hydraulic Driving Robot for Intra-operative MRI-guided Bilateral Stereotactic Neurosurgery, IEEE Robotics and Automation Letters. 2018, 3(3): 2515-2522.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Finalist for ICRA Best Medical Robotics Paper Award , IEEE International Conference on Robotics and Automation 2018 (ICRA’18) . 2018.

GUO Z., Kwok K.W., DONG Z., LEE K.H., FU H.C. and CHEUNG C.L., US Provisional Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, US 62/623,280 . 2018.

Kwok K.W., A concise review of 3D printing for clinicians, Invited talk for CUHK 3D Echo Course: An Interactive Hands-on Workshop, Prince of Wales Hospital, Hong Kong . 2017.

Kwok K.W., Associate Editor, Annals of Biomedical Engineering. Spinger US, 2018.

Kwok K.W., Associate Editor, IEEE/RSJ International Conference on Intelligent Robotics and Systems (IROS) . IEEE, 2017.

Kwok K.W., Associate Editor, The 15th International Conference on Ubiquitous Robots. 2018.

Kwok K.W., Beyond Human Intelligence: Lesson Learned from Healthcare AI, Invited talk by Eagle Eye Quantitative Trading Workshop and Forum, Shenzhen, China. 2018.

Kwok K.W., Computational Mechanics of Soft Robots – from Design, Control to Sensing, Invited talk by Hamlyn Symposium on Medical Robotics 2018, Workshop of Soft and Continuum Robots Across Scale. 2018.

Kwok K.W., ENGG5402 Advanced Robotics , Invited Lecture by Department of Mechanical and Automation Engineering, CUHK. 2018.

Kwok K.W., High-performance Robot-Assisted Systems for Image-guided Interventions, Invited talk by Centre for Frontier Medical Engineering, Chiba University, Japan. 2017.

Kwok K.W., Soft is Hard? Control of Soft Robots, Invited talk in Centre for IROS 2017 Workshop on Soft Morphological Design for Haptic Sensation, Interaction and Display, Vancouver, Canada. 2017.

Kwok K.W., CHEUNG C.L., HO J.D.-.L., GUO Z., Chang H.C.C. and Vardhanabhuti V., US Provisional Patent: MRI Tracking Device Design, Fabrication, and Methods of use for MRI-Guided Robotic System, US 62/640,798 . 2018.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., Best Conference Paper Award , the 2017 IEEE International Conference on Real-time Computing and Robotics. 2017.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., FEM-based Soft Robotic Control Framework for Intracavitary Navigation, IEEE International Conference on Real-time Computing and Robotics (RCAR) 2017.

LEE K.H., Fu K.C.D., GUO Z., DONG Z., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., LUK W. and Kwok K.W., MR Safe Robotic Manipulator for MRI-guided Intra-cardiac Catheterization, IEEE/ASME Transactions on Mechatronics. 2018, 23(2): 586-595.

LEE K.H., Fu K.C.D., LEONG C.W.M., CHOW C.K., FU H.C., Althoefer K., Sze K.Y., Yeung C.K. and Kwok K.W., Nonparametric Online Learning Control for Soft Continuum Robot: An Enabling Technique for Effective Endoscopic Navigation, Soft Robotics. 2017, 4(4): 324-337.

Lee A.P.W., LEONG C.W.M., Kwok K.W. and Fan Y.T., Using 3D Printed Models For Planning Transcatheter Aortic Valve Implantation In Patients With Bicuspid Aortic Valve, Journal of the American College of Cardiology. 2018, 71(11): A1130.

Li P., Lam J., Kwok K.W. and Lu R., Stability and stabilization of periodic piecewise linear systems: A matrix polynomial approach, Automatica. 2018, 94: 1-8.

WANG X., LEE K.H., Fu K.C.D., DONG Z., WANG K., FANG G., LEE S., LEE A.P.W. and Kwok K.W., Experimental validation of robot-assisted cardiovascular catheterization: model-based versus model-free control, International Journal of Computer Assisted Radiology and Surgery. 2018, 13(6): 797-804.

Researcher : LEE KH

List of Research Outputs

DONG Z., GUO Z., Fu K.C.D., LEE K.H., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., Luk W. and Kwok K.W., Best Poster Paper Award (Merit prize), the 2017 IEEE International Conference on Robotics and Automation (ICRA’17) workshop on Surgical Robots， sponsored by Intuitive Surgical Inc.. 2017.

DONG Z., Kwok K.W., GUO Z. and LEE K.H., US Provisional Patent: Fluid Powered Master-Slave Actuation for MRI-Guided Interventions, US 62/640,302 . 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Best Conference Paper Award, In: 2018 IEEE International Conference on Robotics and Automation (ICRA’18), IEEE International Conference on Robotics and Automation 2018 (ICRA’18). 2018.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., POON W.S., CHAN D.T.M. and Kwok K.W., Compact Design of a Hydraulic Driving Robot for Intra-operative MRI-guided Bilateral Stereotactic Neurosurgery, IEEE Robotics and Automation Letters. 2018, 3(3): 2515-2522.

GUO Z., DONG Z., LEE K.H., CHEUNG C.L., FU H.C., HO J.D.-.L., He H., Poon W.S., Chan D.T.M. and Kwok K.W., Finalist for ICRA Best Medical Robotics Paper Award , IEEE International Conference on Robotics and Automation 2018 (ICRA’18) . 2018.

GUO Z., Kwok K.W., DONG Z., LEE K.H., FU H.C. and CHEUNG C.L., US Provisional Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, US 62/623,280 . 2018.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., Best Conference Paper Award , the 2017 IEEE International Conference on Real-time Computing and Robotics. 2017.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., FEM-based Soft Robotic Control Framework for Intracavitary Navigation, IEEE International Conference on Real-time Computing and Robotics (RCAR) 2017.

LEE K.H., Fu K.C.D., GUO Z., DONG Z., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., LUK W. and Kwok K.W., MR Safe Robotic Manipulator for MRI-guided Intra-cardiac Catheterization, IEEE/ASME Transactions on Mechatronics. 2018, 23(2): 586-595.

LEE K.H., Fu K.C.D., LEONG C.W.M., CHOW C.K., FU H.C., Althoefer K., Sze K.Y., Yeung C.K. and Kwok K.W., Nonparametric Online Learning Control for Soft Continuum Robot: An Enabling Technique for Effective Endoscopic Navigation, Soft Robotics. 2017, 4(4): 324-337.

WANG X., LEE K.H., Fu K.C.D., DONG Z., WANG K., FANG G., LEE S., LEE A.P.W. and Kwok K.W., Experimental validation of robot-assisted cardiovascular catheterization: model-based versus model-free control, International Journal of Computer Assisted Radiology and Surgery. 2018, 13(6): 797-804.

Researcher : LEI H

List of Research Outputs

LEI H., Jones R.M. and Li Y., Exploring surface cleaning strategies in hospital to prevent contact transmission of methicillin-resistant Staphylococcus aureus, BMC Infectious Diseases. 2017, 17.

LEI H., Li Y., XIAO S., Yang X.A., Lin C., Norris S.L., Wei D., Hu Z. and Ji S., Logistic growth of a surface contamination network and its role in disease spread, Scientific Reports. 2017, 7.

LEI H., Li Y., XIAO S., Lin C.H., Norris S.L., Wei D., Hu Z. and Ji S., Routes of transmission of influenza A H1N1, SARS CoV, and norovirus in air cabin: Comparative analyses, Indoor Air. 2018, 28: 394-403.

LEI H., The Surface Contamination Network and its Application in Fomite Infection Studies, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2017, 1-190.

XIAO S., Li Y., Lei H., Lin C., Norris S.L., Yang X. and ZHAO P., Characterizing dynamic transmission of contaminants on a surface touch network, Building and Environment. 2018, 129: 107-116.

Researcher : LEONG CWM

List of Research Outputs

DONG Z., GUO Z., Fu K.C.D., LEE K.H., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., Luk W. and Kwok K.W., Best Poster Paper Award (Merit prize), the 2017 IEEE International Conference on Robotics and Automation (ICRA’17) workshop on Surgical Robots， sponsored by Intuitive Surgical Inc.. 2017.

Fan S., Chan A., Au S., LEONG C.W.M., CHOW C.K., Fan Y.T., Wong R., Chan S., Ng S.K., Lee A.P.W. and Kwok K.W., Personalised Anaesthesia: 3D Printing in Patient with Facial Deformity and Difficult Airway, British Journal of Anaesthesia. 2018, 121(3): 675-678.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., Best Conference Paper Award , the 2017 IEEE International Conference on Real-time Computing and Robotics. 2017.

LEE K.H., LEONG C.W.M., CHOW C.K., FU H.C., Fu K.C.D., Luk W., Sze K.Y., Yeung C.K. and Kwok K.W., FEM-based Soft Robotic Control Framework for Intracavitary Navigation, IEEE International Conference on Real-time Computing and Robotics (RCAR) 2017.

LEE K.H., Fu K.C.D., GUO Z., DONG Z., LEONG C.W.M., CHEUNG C.L., LEE A.P.W., LUK W. and Kwok K.W., MR Safe Robotic Manipulator for MRI-guided Intra-cardiac Catheterization, IEEE/ASME Transactions on Mechatronics. 2018, 23(2): 586-595.

LEE K.H., Fu K.C.D., LEONG C.W.M., CHOW C.K., FU H.C., Althoefer K., Sze K.Y., Yeung C.K. and Kwok K.W., Nonparametric Online Learning Control for Soft Continuum Robot: An Enabling Technique for Effective Endoscopic Navigation, Soft Robotics. 2017, 4(4): 324-337.

Lee A.P.W., LEONG C.W.M., Kwok K.W. and Fan Y.T., Using 3D Printed Models For Planning Transcatheter Aortic Valve Implantation In Patients With Bicuspid Aortic Valve, Journal of the American College of Cardiology. 2018, 71(11): A1130.

Researcher : LI F

List of Research Outputs

LI F. and Leung Y.C.D., TiO₂ nanotube arrays modified with different noble metal nanoparticles for enhancement of photoelectrochemical performance, Proceeding of Advanced Energy Materials and Technology Congress. Sweden, IAAM, 2018, Abstract Book.

Researcher : LI H

List of Research Outputs

SUN H., LI H. and Wang M., Fabricating cell fibers via coaxial electrospinning, HKU-Osaka University Joint Symposium on Materials Research. Hong Kong, 2017, 1 pp.

Researcher : LI HY

List of Research Outputs

YIP C.H., CHOOI W.H., LI H.Y. and Chan B.P., Developing a multiplex microscale screening platform by multiphoton biofabrication technology for maintenance of cell phenotype, ISSCR2017, 4-8 Aug 2017, Boston, USA. 2017.

Researcher : LI J

List of Research Outputs

SUN H., LI J. and Wang M., Bijels-derived hybrid hydrogel membranes and growth factor delivery, Society For Biomaterials 2018 Annual Meeting. Alanta, GA, USA, 2018, 1 pp.

Wang Z., Li J., Xie T., Huang W., He H., Pendkar N., Ding W. and Mao Y., Hong Kong X Best FYP Award (Dental Surgical Robot), Hong Kong X Tech. 2018.

ZHOU J., CHEN X., Li J., Tian Y. and Wang Z., A Soft Robotic Approach to Robust and Dexterous Grasping, IEEE-RAS International Conference on Soft Robotics. 2018.

ZHOU J., CHEN X., Li J. and Wang Z., A Soft Robotic Gripper With Hybrid Structure Capable Of Robust And Dexterous Grasping, IEEE-RAS International Conference on Soft Robotics. 2018.

Researcher : LI S

List of Research Outputs

Kwan K.W., Li S., Hau N.Y., Li W., Feng S.P.T. and Ngan A.H.W., Light-stimulated actuators based on nickel hydroxide-oxyhydroxide, In: Bradley Nelson, Science Robotics. AAAS, 2018, 3.

LI S. and Chen Y., Abnormal negative thermal expansion of sodium: a first-principles discovery at high pressures, Phys. Rev. B. 2017, 96: 134104.

LI S., WANG C. and Chen Y., Anharmonic lattice dynamics of bcc sodium under high pressures, Phys. Chem. Chem. Phys.. 2018, 20: 14647.

LI S. and Li W., Hydrogel-integrated plasmonic nanostructures on optical fiber facet for remote and real-time pH sensing, SPIE Optics + Photonics 2017. SPIE, 10353-29.

LI S., Wang Y., Wang H. and Chen Y., Mechanical failure of graphene and the anharmonic phonon coupling mechanisms, Carbon. 2018, 126: 404.

LI S., Novel Nanostructured Plasmonic Sensing Devices: Fabrication, Modeling and Application, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2017, 1-166.

LI S. and Chen Y., Strain engineering of the lattice thermal transport of monolayer h-BN, Nano-Mechanical Interfaces Gordon Research Conference, Hong Kong. 2017.

Li S. and Li W., Refractive index sensing using disk-hole coupling plasmonic structures fabricated on fiber facet, Optics Express. 2017, 25(23): 29380-29388.

Li W., MIN S., Li S., Zhu Z., Liang C. and Cai J., Refractometric Sensing Using Gradient Plasmonic Nanostructures: Mapping Spectral Information to Spatial Patterns, META 2018 , the 9th International Conference on Metamaterials, Photonic Crystals and Plasmonics. 2018.

Li W., CAI J., ZHANG C., KHAN A., Liang C., LI S., ZHU Z. and MIN S., Solution-Processed Metallic Micro and Nanostructures for Transparent Electrodes and Plasmonic Sensors, The 17th IEEE International Conference on Nanotechnology (IEEE-NANO 2017). 2017, FrO1O3.1.

Liang C., Qu T., Cai J., Zhu Z., Li S. and Li W., Wafer-scale nanopatterning using fast-reconfigurable and actively-stabilized two-beam fiber-optic interference lithography, Optics Express. 2018, 26(7): 8194-8200.

Lin S., Li W., LI S., Zhang X., Chen Z., Xu Y., Chen Y. and Pei Y., High thermoelectric performance of Ag9GaSe6 enabled by low cutoff frequency of acoustic phonons, Joule. 2017, 1: 816.