DEPT OF MECHANICAL ENGG



Researcher : CHAO Y
List of Research Outputs

CHAO Y., MAK S.Y., Rahman S., ZHU S. and Shum H.C., Generation of High‐Order All‐Aqueous Emulsion Drops by Osmosis‐Driven Phase Separation, Small. Wiley, 2018, 14: 1802107.
Chan Y.K., YAN W.H., HUNG L.T., CHAO Y., WU J. and Shum H.C., All Aqueous Thin-film-flow-induced Cell-based Monolayer, ACS Applied Materials & Interfaces. ACS Publications, 2019, 11: 22869-22877.
LU Y., Chan Y.K., CHAO Y., Shih K.C., Lai J.S.M., Wong S.H.D. and Shum H.C., Adhesion of silicone oil and emulsification: an in vitro assessment using a microfluidic device and ‘Eye‐on‐a‐Chip’, Acta Ophthalmologica. 2018.
YUAN H., CHAO Y., Li S., Tang Y.H., HUANG Y., CHE Y., Wong A.S.T., Zhang T. and Shum H.C., Picoinjection-Enabled Multitarget Loop-Mediated Isothermal Amplification for Detection of Foodborne Pathogens, Analytical Chemistry. American Chemical Society (ACS), 2018, 90: 13173-13177.


Researcher : CHEN J
List of Research Outputs

CHEN J., Liu C., Huang Y.T., Lee H. and Feng S.P.T., Study of the growth mechanisms of nanoporous Ag flowers for non-enzymatic glucose detection, Nanotechnology. 2018, 29: 505501.


Researcher : CHEN M
List of Research Outputs

XU Z., CHEN M., Lee H., Feng S.P.T., Park J.Y., Lee S. and Kim J., X-ray-Powered Micromotors, ACS Applied Materials & Interfaces. 2019, 11: 15727-15732.


Researcher : CHEN X
List of Research Outputs

CHEN X., Hu T., Song C. and Wang Z., Analytical Solution to Global Dynamic Balance Control of the Acrobot, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). Maldives, 2018, 1-6.
CHEN X., YI J., Li J., ZHOU J. and Wang Z., Soft-Actuator-Based Robotic Joint for Safe and Forceful Interaction With Controllable Impact Response, IEEE Robotics and Automation Letters. 2018, 3: 3505-3512.
YI J., CHEN X., Song C., ZHOU J., Liu Y., Liu S. and Wang Z., Customizable Three-Dimensional-Printed Origami Soft Robotic Joint With Effective Behavior Shaping for Safe Interactions, IEEE Transactions on Robotics . 2019, 35: 114-123.
ZHOU J., CHEN X., Chang U., Liu Y., Chen Y.H. and Wang Z., A Grasping Component Mapping Approach for Soft Robotic End-Effector Control, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). 2019.
ZHOU J., YI J., CHEN X., Liu Z. and Wang Z., BCL-13: A 13-DOF Soft Robotic Hand for Dexterous Grasping and In-Hand Manipulation, IEEE Robotics and Automation Letters. 2018, 3: 3379-3386.
ZHOU J., CHEN X., Chang U. and Wang Z., Best Student Paper Award Finalist, "A Grasping Component Mapping Approach for General and Intuitive Soft Robotic End-Effector Control", IEEE International Conference on Soft Robotics (RoboSoft) 2019, Korea. 2019.
ZHOU J., CHEN X., Wang Z., Pan J. and Wang W.P., Intuitive Control of Humanoid Soft-Robotic Hand BCL-13, 2018 IEEE-RAS 18th International Conference on Humanoid Robots (Humanoids). 2018.


Researcher : CHENG R
List of Research Outputs

CHENG R., Chung C., Zhang H., ZHOU Z., Zhai P., Huang Y.T., Lee H. and Feng S.P.T., An Air Knife-Assisted Recrystallization Method for Ambient-Process Planar Perovskite Solar Cells and Its Dim-Light Harvesting, Small. 2019, 15: 1804465.
Zhai P., CHENG R., REN L., Huang Y.T., Lee H. and Feng S.P.T., In Situ Interface Engineering of TiO 2 Nanocrystals for Fully Ambient-Processed Perovskite Solar Cells , Solar RRL. 2018, 1800103.


Researcher : CHEUNG CL
List of Research Outputs

GUO Z., Kwok K.W., DONG Z., Lee K.H., FU H.C. and CHEUNG C.L., PCT Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, PCT/CN2019/072961 , 2019.
Kwok K.W., DONG Z., HE Z., FU H.C., CHEUNG C.L., Wong H.W., Lee C.Y., Bozzolan A.F., Lau Y.H., Ng M.C., Lo T.F., Tseng W., Lo K.M., Yeung K.H., Cheung K.H., Yeung S.H., Tung W.L. and Chan W.H., First Runner-up Award, Robocon 2019 Hong Kong Contest “Great Urtuu”. 2019.
Kwok K.W., CHEUNG C.L., HO J.D.-.L., GUO Z., Chang H.C.C. and Vardhanabhuti V., PCT Patent: MRI Tracking Device Design, Fabrication, and Methods of use for MRI-Guided Robotic System, PCT/IB2019/051945 , 2019.


Researcher : CHIU TL
List of Research Outputs

Berg P., Vop S., Janiga G., Saalfeld S., Bergersen A.W., Valen-Sendstad K., Bruening J., Goubergrits L., Spuler A., CHIU T.L., Tsang C.O.A., Copelli G., Csippa B., Paal G., Zavodszky G., Detmer F.J., Chung B.J., Cebral J.R., Fujimura S. and Takao H., Multiple Aneurysms AnaTomy CHallenge 2018 (MATCH) - phase II: rupture risk assessment, Journal of Computer Assisted Radiology and Surgery. 2019, Epub on 2019-05-03.
Berg P., Vop S., Saalfeld S., Janiga G., Bergersen A.W., Valen-Sendstad K., Bruening J., Goubergrits L., Spuler A., Cancelliere N.M., Steinman D.A., Pereira V.M., CHIU T.L. and Tsang C.O.A., Multiple Aneurysms AnaTomy CHallenge 2018 (MATCH): phase 1: segmentation, Cardiovascular Engineering and Technology. 2018, 9(4): 565-581.
CHIU T.L., Tang Y.S., Cheng S.W.K. and Chow K.W., Analysis of flow patterns on branched endografts for aortic arch aneurysms, Informatics in Medicine Unlocked. Elsevier, 2018, 13: 62-70.


Researcher : CHOW CK
List of Research Outputs

CHOW C.K., Design and Control of a Soft Robotic Manipulation System for Transoral Laser Microsurgery Under Magnetic Resonance Imaging, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-135.
FAN Y., YANG F., CHEUNG G.S.H., CHAN A.K.Y., WANG D.D., LAM Y.Y., CHOW C.K., LEONG C.W.M., KAM K.K.H., SO K.C.Y., TSE G., QIAO Z., HE B., Kwok K.W. and LEE A.P.W., Device Sizing Guided By Echocardiography-based Three-dimensional Printing Is associated With Superior Outcome After Percutaneous Left Atrial Appendage Occlusion , Journal of the American Society of Echocardiography. 2019, 32(6): 708-719.
Fan Y., Yang F., Cheung G.S.H., Chan A.K.Y., Wang D.D., Lam Y.Y., CHOW C.K., LEONG C.W.M., Kam K.K.H. and So K.C.Y., Device Sizing Guided by Echocardiography-Based Three-Dimensional Printing Is Associated with Superior Outcome after Percutaneous Left Atrial Appendage Occlusion, Journal of the American Socity of Echocardiography. 2019, 32(6): 708-719.
Fan Y., Yang F., Cheung G.S.H., Chan A.K.Y., Wang D.D., Lam Y.Y., CHOW C.K., LEONG C.W.M., Kam K.K.H., So K.C.Y., Tse G., Qiao Z., He B. and APW L.E.E., Device Sizing Guided by Echocardiography-Based Three-Dimensional Printing is Associated with Superior Outcome after Percutaneous Left Atrial Appendage Occlusion, Journal of the American Society of Echocardiography. 2019, 32(6): 708-719.


Researcher : CHUNG MF
List of Research Outputs

LEE C.M., Lau K.S.A., TANG H.L., Wang M., Mok T.Y., CHUNG M.F., Yan W., Shum H.C., Cheah K.S.E., Chan G.C.F., So H.K.H., Wong K.K.Y. and Tsia K.K.M., Multi‐ATOM: Ultrahigh‐throughput single‐cell quantitative phase imaging with subcellular resolution, Journal of Biophotonics. 2019, e201800479.


Researcher : CHUNG WC
List of Research Outputs

PAN Q., CHUNG W.C. and Chow K.W., The coupled Hirota system as an example displaying discrete breathers: Rogue waves, modulation instability and varying cross-phase modulations, AIP Advances. USA, AMER Inst Physics, 2018, 8(9): 095303-15.


Researcher : CUI J
List of Research Outputs

CUI J., He J. and Chen Y., Delocalized carriers and the electrical transport properties of n-type GeSe crystals, ACS Appl. Energy Mater.. 2019, 2: 3703.
CUI J., Chen C., He W., Avila J., Zhao L.D., Asensio M.C., He J. and Chen Y., Large enhancement of electrical transport properties of SnS in the out-of-plane direction by n-type doping: a combined ARPES and DFT study, J. Mater. Chem. A. 2018, 6: 24588.
Chen X., Wu H., CUI J., Xiao Y., Zhang Y., He J., Chen Y., Cao J., Cai W., Pennycook S.J., Liu Z., Zhao L.D. and Sui J., Extraordinary thermoelectric performance in n-type manganese doped Mg3Sb2 Zintl: High band degeneracy, tuned carrier scattering mechanism and hierarchical microstructure, Nano Energy. 2018, 52: 246.
Fu L., CUI J., Yu Y., Huang Y., Wang Y., Chen Y. and He J., Achieving a fine balance between strong mechanical and high thermoelectric properties of n-type PbTe-3%Sb materials by alloying PbS, J. Mater. Chem. A. 2019, 7: 6304.


Researcher : Cai J
List of Research Outputs

Cai J., Zhang M., Sun Z., Zhang C., Liang C., Khan A., Ning X.H., Ge H.X., Feng S.P.T. and Li W., Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics, Journal of Materials Chemistry C. 2019, 7(15): 4363-4373.
Cai J., Zhang C., Khan A., Wang L. and Li W., Selective Electroless Metallization of Micro-and Nanopatterns via Poly (dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications, ACS Applied Materials & Interfaces. 2018.
Fu X., Cai J., Zhang X., Li W., Ge H. and Hu Y., Top-down fabrication of shape-controlled, monodisperse nanoparticles for biomedical applications, Advanced drug delivery reviews. 2018.
SUN C., Cai J., Zhao K. and Li W., Best Invited Poster Award, The 63rd International Conference On Electron, Ion, and Photon Beam Technology and Nanofabrication. 2019.
Zhang C., Cai J., Liang C., Khan A. and Li W., Scalable Fabrication of Metallic Nanofiber Network via Templated Electrodeposition for Flexible Electronics, Advanced Functional Materials. 2019, 1903123.


Researcher : Chan ATY
Project Title:Strategic guidelines for future development to achieve sustainable air quality in urban areas
Investigator(s):Chan ATY
Department:Mechanical Engg
Source(s) of Funding:Other Funding Scheme
Start Date:09/1999


Project Title:Evaluation of air pollution indication system in Hong Kong
Investigator(s):Chan ATY
Department:Mechanical Engg
Source(s) of Funding:Pollution Studies in Hong Kong
Start Date:01/2000


Project Title:16th Engineering Mechanics Conference (ASCE) Drag Effect on Mountain Waves by Flow Over Topography
Investigator(s):Chan ATY
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:07/2003


Project Title:Indoor/outdoor air quality relationships of respirable suspended particulates, nitrogen oxides and carbon monoxides in urban buildings
Investigator(s):Chan ATY, Li Y
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:09/2003


Project Title:Correlation between urban morphological attributes and air pollution in urban areas in Hong Kong
Investigator(s):Chan ATY
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:09/2004


Project Title:15th United States National Congress on Theoretical and Applied Mechanics Indoor/outdoor Air Quality Relationship in an Urban Street Canyon
Investigator(s):Chan ATY
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:06/2006




Researcher : Chan BP
Project Title:Photochemical crosslinking (PC) technology in fabrication of collagen-based scaffolds for tissue engineering
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:02/2004


Project Title:International Society for Stem Cell Research 4th ISSCR Annual Meeting A Novel 3-Dimensional Culture System for Human Mesenchymal Stem Cells
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:06/2006


Project Title:Collagen biomaterial and bone marrow derived mesenchymal stem cell (MSCs) based therapy - Second generation tissue engineering solutions for cartilage repair
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:07/2008


Project Title:Collagen biomaterial and bone marrow derived mesenchymal stem cell (MSCs) based therapy - Second generation tissue engineering solutions for cartilage repair
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:08/2008


Project Title:Creating Stable Tissue Interfaces for Bioengineered Intervertebral Disc Segment
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:02/2009


Project Title:Creating Stable Tissue Interfaces for Bioengineered Intervertebral Disc Segment
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:05/2009


Project Title:Research Output Prize
Investigator(s):Chan BP, Li CH, Sze KY, Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:Research Output Prize (in Faculty)
Start Date:12/2009


Project Title:Outstanding Young Researcher Award 2009-10
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Outstanding Young Researcher Award
Start Date:12/2010


Project Title:Bioengineering a Prototype Intervertebral Disc Motion Segment [ITS/552/09FP]
Investigator(s):Chan BP, Luk KDK, Cheung KMC
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:12/2010


Project Title:Bioengineering a Prototype Intervertebral Disc Motion Segment
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:12/2010


Project Title:Bioengineering a Prototype Intervertebral Disc Motion Segment
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:12/2010


Project Title:Development of a Human Mesenchymal Stem Cell (MSC)-based Tri-layered Osteochondral Graft for Osteoarthritis (OA) Treatment
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:12/2014


Project Title:Development of a Human Mesenchymal Stem Cell (MSC)-based Tri-layered Osteochondral Graft for Osteoarthritis (OA) Treatment
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:12/2014


Project Title:Development of a human mesenchymal stem cell (MSC)-based tri-layered osteochondral graft for osteoarthritis (OA) treatment
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Support Programme (Tier 2)
Start Date:12/2014


Project Title:Research Output Prize (Faculty of Engineering)
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Research Output Prize (in Faculty)
Start Date:12/2014


Project Title:Rationalizing scaffold design with optimal cell niche for mesenchymal stem cell-based therapy in disc degeneration
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:NSFC/RGC Joint Research Scheme
Start Date:01/2015
Completion Date:12/2018


Project Title:Development of a Human Mesenchymal Stem Cell (MSC)-based Tri-layered Osteochondral Graft for Osteoarthritis (OA) Treatment
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:11/2015


Project Title:Compression-induced actin protrusions (CAPs) in human mesenchymal stem cells - Understanding the mechanisms of mechanoregulation
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2016
Completion Date:12/2019


Project Title:Collagen microencapsulation of human mesenchymal stem cells as an in vitro model recapitulating mesenchymal condensation – Matrix-driven modulation of molecular signaling for cartilage tissue engineering
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2017


Project Title:3D encapsulation-induced autophagy promotes mesenchymal condensation and chondrogenesis in human MSCs?
Investigator(s):Chan BP, Lam KL
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2017


Project Title:Bioengineered osteochondral constructs for cartilage regeneration - A minipig study
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:06/2017


Project Title:Translating Of A Novel Cartilage Regeneration Technology Into A New Therapeutic Treatment For Patients With Focal Cartilage Injuries
Investigator(s):Chan BP, Chan GCF, Yau WP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Support Programme (Tier 2)
Start Date:09/2017


Project Title:Translating Of A Novel Cartilage Regeneration Technology Into A New Therapeutic Treatment For Patients With Focal Cartilage Injuries
Investigator(s):Chan BP, Chan GCF, Yau WP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:10/2017


Project Title:Translating Of A Novel Cartilage Regeneration Technology Into A New Therapeutic Treatment For Patients With Focal Cartilage Injuries
Investigator(s):Chan BP, Chan GCF, Yau WP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:12/2017


Project Title:Reconstituting the soluble cell niche in vitro using multiphoton-based microfabrication
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2018


Project Title:Signaling by Adhesion Receptors Gordon Research Conference; Mechanical compression induced maturation of cell matrix adhesions in human mesenchymal stem cells
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:06/2018


Project Title:A Multiphoton 3D Micro-printing-based Micro-fabrication and Micro-patterning Platform Technology
Investigator(s):Chan BP, Chan SY, Gao B, Lee CW, Wong KKY, Yu C
Department:Mechanical Engg
Source(s) of Funding:Platform Technology Funding
Start Date:06/2018


Project Title:Translating Of A Novel Cartilage Regeneration Technology Into A New Therapeutic Treatment For Patients With Focal Cartilage Injuries
Investigator(s):Chan BP, Chan GCF, Yau WP
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:09/2018


Project Title:Translating Of A Novel Cartilage Regeneration Technology Into A New Therapeutic Treatment For Patients With Focal Cartilage Injuries
Investigator(s):Chan BP, Chan GCF, Yau WP
Department:Mechanical Engg
Source(s) of Funding:Postdoctoral Hub Programme for ITF projects
Start Date:09/2018


Project Title:Multiphoton fabrication of 3D protein micro-niche arrays for single cell-based asymmetric cell division (ACD) studies
Investigator(s):Chan BP, Gao B
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


Project Title:Characteristic actin spike formation of human mesenchymal stem cells on cell-derived matrices – Mechanistic understanding of cell-matrix interactions
Investigator(s):Chan BP, Li CW
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2019


Project Title:Cell Contact and Adhesion Gordon Research Conference; Mechanical loading induced changes in actin protrusions and matrix adhesions of human mesenchymal stem cells in 3D configurations
Investigator(s):Chan BP
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:06/2019


List of Research Outputs

Chan B.P., Cartilage Tissue Engineering – Opportunities and Challenges, Grand Challenges for Engineering Symposium, The University of Hong Kong, 16 Aug 2018. 2018.
Chan B.P., Multiphoton 3D micro-printing of protein microstructures and micropatterns for cell niche studies, The 5th TERMIS-WC 2018, 4-7 Sep 2018, Kyoto, Japan. 2018.
WANG X. and Chan B.P., Gradient immobilization of Wnt proteins by multiphoton biofabrication technology., European Wnt Meeting. 12-14 Sep 2018, Heidelberg, Germany.. 2018.
Wong S.Y., Tsang K.K., Chu A.M.W., Chan B.P., Yao K.M. and Lo A.C.Y., Injectable cell-encapsulating composite alginate-collagen platform with inducible termination switch for safer ocular drug delivery, Biomaterials. 2019, 201: 53-67.


Researcher : Chan CW
Project Title:IFAC Symposium on Artificial Intelligence in Real Time Control AIRTC-2000 Adaptive Control of Stochastic Nonlinear Systems Using Neurofuzzy Networks Modelling of Nonlinear Dynamic Systems Using Support Vector Neural Networks
Investigator(s):Chan CW
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:10/2000


Project Title:International Federation of Automatic Control 15th IFAC World Congress Asymptotic Local Approach in Fault Detection with Faults Modeled by Neurofuzzy Networks
Investigator(s):Chan CW
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:07/2002


Project Title:Installation of wave suppressor in the Victoria Harbour
Investigator(s):Chan CW
Department:Mechanical Engg
Source(s) of Funding:Utility Information Ltd.
Start Date:06/2006


Project Title:Neurofuzzy network based adaptive control for nonlinear networked control systems
Investigator(s):Chan CW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2008




Researcher : Chan HN
List of Research Outputs

Chan H.N. and Chow K.W., Periodic and localized wave patterns for coupled Ablowitz-Ladik systems with negative cross phase modulation, Communications in Nonlinear Science and Numerical Simulation. Netherlands, Elsevier Science BV, 2018, 65: 185-195.
LIU T., Chan H.N., Grimshaw R.H.J. and Chow K.W., Internal rogue waves in stratified flows and the dynamics of wave packets, Nonlinear Analysis: Real World Applications. England, Pergamon-elsevier Science Ltd, 2018, 44: 449-464.


Researcher : Chan KL
Project Title:Thermal investigation of large area organic memory array on cellulose fiber paper: How does waste heat cause memory loss?
Investigator(s):Chan KL
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2013


Project Title:High sensitivity optical sensor array on hemispherical surface: a step towards the artificial eyeball
Investigator(s):Chan KL, Shih KC
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:08/2014


Project Title:Next generation of temperature sensor based on organic/metal hybrid thin film thermistor: from characterizations to device fabrications
Investigator(s):Chan KL
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2014


Project Title:High Sensitivity Optical Sensor Array On Hemispherical Surface: A Step Towards The Artificial Eyeball
Investigator(s):Chan KL, Shih KC
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:11/2014


Project Title:Organic memory array fabricated under ambient air environment: from polycrystalline thin film to single crystal devices
Investigator(s):Chan KL
Department:Mechanical Engg
Source(s) of Funding:NSFC/RGC Joint Research Scheme
Start Date:01/2015
Completion Date:12/2018


Project Title:Research Output Prize (Faculty of Engineering)
Investigator(s):Chan KL, Roberts RC
Department:Mechanical Engg
Source(s) of Funding:Research Output Prize (in Faculty)
Start Date:02/2016


Project Title:High sensitivity pressure sensor for biomedical applications
Investigator(s):Chan KL
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:04/2016


Project Title:Thermal characterizations of grain boundaries in organic single crystals: from trap state physics to temperature sensor array
Investigator(s):Chan KL
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2016


Project Title:Body heat power generation by using organic thermoelectric materials
Investigator(s):Chan KL
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:04/2017


Project Title:Conformal temperature sensor for biomedical application
Investigator(s):Chan KL
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:06/2017


Project Title:Integrated flexible heater and temperature sensor array for conformal biomedical ablation
Investigator(s):Chan KL
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:10/2017


Project Title:Ultra-flexible and low power-consuming sensors for implantation and in vivo monitoring
Investigator(s):Chan KL
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:04/2018


Project Title:In-situ Deposition and characterizations stage for 2-D X-ray diffraction
Investigator(s):Chan KL, Huang M, Feng SPT, Kim J, Li W, Choy WCH, Shih K, Yam VWW
Department:Mechanical Engg
Source(s) of Funding:Small Equipment Grant
Start Date:04/2018


List of Research Outputs

Borchert J., Peng B., Letzkus F., Burghartz J., Chan K.L., Zojer K.L., Ledwigs S. and Klauk H., Small contact resistance and high-frequency operation of flexible low-voltage inverted coplanar organic transistors, Nature Communications. Springer Nature Publishing, 2019, 10.
ZHOU Z., Zhang Z., Wu Q.S., Ji X., Wang J.L., Zeng X.C., Feng S.P.T. and Chan K.L., Inch-Scale Grain Boundary Free Organic Crystals Developed by Nucleation Seed-Controlled Shearing Method, ACS Applied Materials & Interfaces. 2018, 10: 35395-35403.


Researcher : Chan KW
Project Title:Computer-aided mould design and manufacture of thermoformed PVC sheets
Investigator(s):Chan KW
Department:Mechanical Engg
Source(s) of Funding:Other Funding Scheme
Start Date:01/2002


Project Title:Design and development of implantable artifical finger joints for biological repair
Investigator(s):Chan KW, Chow SP, Lu WW, Chiu PKY, Ngan AHW, Luk KDK
Department:Mechanical Engg
Source(s) of Funding:Guangdong-Hong Kong Technology Cooperation Funding Scheme
Start Date:06/2007


Project Title:Design and development of implantable artifical finger joints for biological repair
Investigator(s):Chan KW
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:10/2009


Project Title:Design and development of implantable artifical finger joints for biological repair
Investigator(s):Chan KW
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:10/2009




Researcher : Chan YK
List of Research Outputs

Chan Y.K., YAN W.H., HUNG L.T., CHAO Y., WU J. and Shum H.C., All Aqueous Thin-film-flow-induced Cell-based Monolayer, ACS Applied Materials & Interfaces. ACS Publications, 2019, 11: 22869-22877.
Chan Y.K., LU Y., Wong D. and Shum H.C., Emulsification of silicone oil (SiO) tamponade with high-molecular-weight (HMW) additive under simulated saccadic eye movements in vitro using an “Eye-on-a-Chip”, The Association for Research in Vision and Ophthalmology (ARVO) Annual Meeting 2018, Investigative Ophthalmology & Visual Science. The Association for Research in Vision and Ophthalmology, 2018, 59: 5927.
FU L., Chan Y.K., Nie L., Dai Q., Qian Z.B., Shih K.C., Lai J.S.M., Huang R. and Pan W.H., Ciliochoroidal detachment after Ahmed glaucoma valve implantation: a retrospective study, BMC Ophthalmology. 2019, 19.
LU Y., Chan Y.K., CHAO Y., Shih K.C., Lai J.S.M., Wong S.H.D. and Shum H.C., Adhesion of silicone oil and emulsification: an in vitro assessment using a microfluidic device and ‘Eye‐on‐a‐Chip’, Acta Ophthalmologica. 2018.
WU J., Mak H.K., Chan Y.K., Lin C., KONG C., Leung K.S. and Shum H.C., An in vitro pressure model towards studying the response of primary retinal ganglion cells to elevated hydrostatic pressures, Scientific Reports. 2019, 9.


Researcher : Chang U
List of Research Outputs

ZHOU J., CHEN X., Chang U., Liu Y., Chen Y.H. and Wang Z., A Grasping Component Mapping Approach for Soft Robotic End-Effector Control, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). 2019.
ZHOU J., CHEN X., Chang U. and Wang Z., Best Student Paper Award Finalist, "A Grasping Component Mapping Approach for General and Intuitive Soft Robotic End-Effector Control", IEEE International Conference on Soft Robotics (RoboSoft) 2019, Korea. 2019.


Researcher : Chao YHC
Project Title:Resuspension of bioaerosols on surfaces loaded with dust and its effect on microorganism viability
Investigator(s):Chao YHC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2016


Project Title:Study of Cooling Effect by Surface Treatment and its Application to Smart Green Buildings
Investigator(s):Chao YHC
Department:Mechanical Engg
Source(s) of Funding:Collaborative Research Fund (CRF) - Group Research Project
Start Date:06/2017


Project Title:Investigation of enhancement of particle deposition by micro-structured surfaces in turbulent flows
Investigator(s):Chao YHC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2018


Project Title:Nanoparticle separation in a microfluidic channel by acoustophoresis and its application to the development of a personal ultrafine particle sensor
Investigator(s):Chao YHC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


List of Research Outputs

Chao Y.H.C., Editor, Energy and Buildings. 2019.
Chao Y.H.C., Member of the Editorial Board, Building Simulation: An International Journal (2007 – Present). 2019.
Chao Y.H.C., Member of the Editorial Board, Building and Environment (2015 – Present). 2019.
Chao Y.H.C., Member of the Editorial Board, Indoor Air (2014 – Present). 2019.
Che W.W., Tso C.Y., Sun L., Ip D.Y.K., Lee H., Chao Y.H.C. and Lau A.K.H., Energy consumption, indoor thermal comfort and air quality in a commercial office with retrofitted heat, ventilation and air conditioning (HVAC) system, Energy and Buildings. 2019, 201: 202-215.
Jeong S.Y., Tso C.Y., Zouagui M., Wong Y.M. and Chao Y.H.C., A numerical study of daytime passive radiative coolers for space cooling in buildings, Building Simulation. 2018, 11: 1011-1028.
Jeong S.Y., Tso C.Y., Ha J.Y., Wong Y.M., Chao Y.H.C., Huang B.L. and Qiu H.H., Field investigation of a photonic multi-layered TiO2 passive radiative cooler in sub-tropical climate, Renewable Energy. 2019, 146: 44-55.
Lee H.H., Cheung Y.S., Fu S.C. and Chao Y.H.C., Study of Particle Resuspension from Dusty Surfaces Using a Centrifugal Method, Indoor Air. 2019, 29: 791-802.
Leung W.T., Fu S.C. and Chao Y.H.C., Detachment of bacteria-laden droplet from dusty surface by centrifugal method, 11th Asian Aerosol Conference. 2019.
Ng T.W., Ip M., Chao Y.H.C., Tang W.J., Lai K.P., Fu S.C., Leung W.T. and Lai K.M., Differential gene expression in Escherichia coli during aerosolization from liquid suspension, Applied Microbiology and Biotechnology. 2018, 102(14): 6257-6267.
Siddiqui F.R., Tso C.Y., Chan K.C., Fu S.C. and Chao Y.H.C., Dataset on critical parameters of dispersion stability of Cu/Al2O3 nanofluid and hybrid nanofluid for various ultra-sonication times, Data in Brief. 2019, 22: 863-865.
Siddiqui F.R., Tso C.Y., Chan K.C., Fu S.C. and Chao Y.H.C., On trade-off for dispersion stability and thermal transport of Cu-Al2O3 hybrid nanofluid for various mixing ratios, International Journal of Heat and Mass Transfer. 2019, 132: 1200-1216.
Sun J., Zeng L., Jiang H.R., Chao Y.H.C. and Zhao T.S., Formation of electrodes by self-assembling porous carbon fibers into bundles for vanadium redox flow batteries, Journal of Power Sources. 2018, 405: 106-113.
Traipattanakul B., Tso C.Y. and Chao Y.H.C., A phase-change thermal diode using electrostatic-induced coalescing-jumping droplets, International Journal of Heat and Mass Transfer. 2019, 135: 294-304.
Traipattanakul B., Tso C.Y. and Chao Y.H.C., Electrostatic-induced coalescing-jumping droplets on nanostructured superhydrophobic surfaces, International Journal of Heat and Mass Transfer. Elsevier Ltd., 2019, 128: 550-561.
Wong C.T., Leung W.T., Fu S.C., Li Y., Law A.K.Y. and Chao Y.H.C., Effect of surface roughness on droplet resuspension behavior, 15th International Conference on Indoor Air Quality and Climate, Indoor Air 2018. USA, paper ID 266.
Wong R.Y.M., Tso C.Y., Chao Y.H.C., Huang B.L. and Wan M.P., Ultra-broadband asymmetric transmission metallic gratings for subtropical passive daytime radiative cooling, Solar Energy Materials and Solar Cells. 2018, 186: 330-339.
Wu C.L., Zhang H.L., Fu S.C., Chan K.C., Qin D.D. and Chao Y.H.C., Ultrafine particle emissions from a smouldering cigarette in a residence and its associated lung cancer risk, Indoor and Built Environment. 2019, 28: 1396-1405.
Xu H.L., Fu S.C., Leung W.T., Lai T.W. and Chao Y.H.C., Enhancement of submicron particle deposition on a semi-circular surface in turbulent flow, Indoor and Built Environment. 2019, 1420326X1985386.
Xu J.C., Fu S.C., Tso C.Y., Wu C.L., Li Y. and Chao Y.H.C., The impact of sinusoidal airflow produced by personalized ventilation on distribution of airborne droplets, 15th International Conference on Indoor Air Quality and Climate, Indoor Air 2018. USA, paper ID 267.
Zhong X.L., Fu S.C. and Chao Y.H.C., An Experimental Study of Particle Deposition on Micro-ribbed Surface in a Chamber, 11th Asian Aerosol Conference. 2019.
Zhu L.Q., Tso C.Y., Chan K.C., Wu C.L., Chen J., He W., Luo S.W. and Chao Y.H.C., Performance investigation of nanostructured composite surfaces for use in adsorption cooling systems with a mass recovery cycle, Science and Technology for the Built Environment. 2018, 24: 1084-1103.


Researcher : Chen K
Project Title:Virtual component modelling for components made of a multiphase perfect material
Investigator(s):Chen K
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:02/2005




Researcher : Chen KZ
Project Title:Virtual component modelling for components made of a multiphase perfect material
Investigator(s):Chen K
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:02/2005




Researcher : Chen MZ
Project Title:Restricted Complexity Passive Network Synthesis
Investigator(s):Chen MZ
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:Network synthesis with applications in suspension systems
Investigator(s):Chen MZ
Department:Mechanical Engg
Source(s) of Funding:National Natural Science Foundation of China (NSFC) - General Program
Start Date:01/2014


Project Title:Field-effect solar cells with ferroelectrics
Investigator(s):Chen MZ
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:08/2014


Project Title:Inerter-incorporated vehicle suspension platform for designing and prototyping
Investigator(s):Chen MZ, Huang L, Chen YH
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Support Programme (Tier 3)
Start Date:09/2014


Project Title:Inerter-incorporated Vehicle Suspension Platform for Designing and Prototyping
Investigator(s):Chen MZ, Huang L, Chen YH
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:09/2014


Project Title:Inerter-incorporated vehicle suspension platform for designing and prototyping
Investigator(s):Chen MZ, Huang L, Chen YH
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:09/2014


Project Title:Mechanical Network Synthesis with Applications
Investigator(s):Chen MZ
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:10/2014


Project Title:Stability of Switched Systems with Application to Smart Grid
Investigator(s):Chen MZ, Chen YH
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:03/2015


Project Title:Inerter-incorporated Vehicle Suspension Platform for Designing and Prototyping
Investigator(s):Chen MZ, Huang L, Chen YH
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:09/2015


List of Research Outputs

Hu Y.I.N.L.O.N.G., Wang K.A.I., Chen Y.H. and Chen M.Z., Inerter-based semi-active suspensions with low-order mechanical admittance via network synthesis, Transaction of Institute of Measurement and Control. 2018, 40: 4233-4245.
Jiang P., Yang Y., Chen M.Z. and Chen Y.H., A variable stiffness gripper based on differential drive particle jamming, Bioinspiration & Biomimetics. iop, 2019, 14.
LIU H., Chen M.Z. and Chen Y.H., When joggers meet robots: the past, present, and future of research on humanoid robots, Bio-Design and Manufacturing. 2019.


Researcher : Chen Y
Project Title:Origins of ultra-low thermal transport in giant anharmonic SnSe and their applications in thermoelectric materials engineering
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:Early Career Scheme (ECS)
Start Date:09/2016


Project Title:Exploring the topologically protected edge state of bilayer graphene by Nano-ARPES and DFT
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:France/Hong Kong Joint Research Scheme - Travel Grants
Start Date:01/2017
Completion Date:12/2018


Project Title:Band nestification for enhancing the figure of merit of thermoelectric materials
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:03/2017
Completion Date:02/2019


Project Title:Combined experimental and theoretical studies of lattice dynamics in PbTe under high pressures
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:Germany/Hong Kong Joint Research Scheme
Start Date:01/2018


Project Title:A combined theoretical and experimental study of the vibrational and thermal-transport properties of partially liquid-like crystalline solids
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2018


Project Title:Superior out-of-plane electrical transport properties in n-type stannous selenide for increased thermoelectric efficiency
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:04/2018


Project Title:Engineering the nano- and microstructures of materials for improved thermal and structural properties
Investigator(s):Chen Y, Huang M, Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Small Equipment Grant
Start Date:04/2018


Project Title:Intrinsic phonon scattering in large-unit-cell argyrodites and thermoelectric engineering via doping and alloying
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


Project Title:High-performance n-type Mg3(Sb,Bi)2 based thermoelectric alloys and the synergistic engineering of the transport properties
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:03/2019


Project Title:2019 TMS Annual Meeting & Exhibition; Doping Effects on the Electronic Structures and Transport Properties of GeS-Type IV-VI Crystals
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:03/2019
Completion Date:03/2019


Project Title:Manipulation of charge carrier in semiconductor for enhanced energy efficiency
Investigator(s):Chen Y, Feng SPT, Li W
Department:Mechanical Engg
Source(s) of Funding:Small Equipment Grant
Start Date:04/2019


Project Title:Reducing fuel consumption and CO2 emission of automotive by harvesting waste heat from engine
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:Environment and Conservation Fund
Start Date:05/2019


Project Title:Conference on advanced materials for energy related applications
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:NSFC/RGC Joint Research Scheme
Start Date:06/2019


Project Title:Workshop on Electronic Materials and Devices
Investigator(s):Chen Y
Department:Mechanical Engg
Source(s) of Funding:Croucher Foundation - Conference / Seminars
Start Date:06/2019


List of Research Outputs

Bayikadi K.S., Sankar R., Wu C.T., XIA C., Chen Y., Chen L.C., Chen K.H. and Chou F.C., Enhanced thermoelectric performance of GeTe through in situ micro domain and Ge vacancy control, J. Mater. Chem. A. 2019, 7: 15181.
CUI J., He J. and Chen Y., Delocalized carriers and the electrical transport properties of n-type GeSe crystals, ACS Appl. Energy Mater.. 2019, 2: 3703.
CUI J., Chen C., He W., Avila J., Zhao L.D., Asensio M.C., He J. and Chen Y., Large enhancement of electrical transport properties of SnS in the out-of-plane direction by n-type doping: a combined ARPES and DFT study, J. Mater. Chem. A. 2018, 6: 24588.
Chen X., Wu H., CUI J., Xiao Y., Zhang Y., He J., Chen Y., Cao J., Cai W., Pennycook S.J., Liu Z., Zhao L.D. and Sui J., Extraordinary thermoelectric performance in n-type manganese doped Mg3Sb2 Zintl: High band degeneracy, tuned carrier scattering mechanism and hierarchical microstructure, Nano Energy. 2018, 52: 246.
Chen Y., A computational study of lattice dynamics of energy materials, 10th International Conference on Materials for Advanced Technologies. 2019.
Chen Y., A computational study of lattice dynamics of energy materials, 10th International Conference on Materials for Advanced Technologies (ICMAT). 2019.
Chen Y., Computational engineering of phonon lifetime and electronic structure of energy materials, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE12). 2018.
Chen Y., Computational study of band structure engineering and anharmonic lattice dynamics, State Key Laboratory of Superhard Materials, Jilin University. 2019.
Chen Y., Distinguished Young Scholar, Natural Science Foundation of Zhejiang Province. 2019.
Chen Y., Doping Effects on the Electronic Structures and Transport Properties of GeS-Type IV-VI Crystals, TMS Annual Meeting & Exhibition. 2019.
Chen Y., Doping effects on the electronic structures and transport properties of GeS-type IV-VI crystals, The Minerals, Metals and Materials Society (TMS) Annual Meeting. 2019.
Chen Y., Editorial board member, ES Energy & Environments. 2018.
Chen Y., Electronic structure engineering of IV-VI group semiconductors, International Conference on High-Performance Ceramics (CICC-11). 2019.
Chen Y., Electronic structure engineering of IV-VI group semiconductors, The 11th International Conference on High-Performance Ceramics (CICC11). 2019.
Chen Y., Electronic structures and lattice dynamics of energy materials, Department of Physics, The Chinese University of Hong Kong. 2018.
Chen Y., Engineering phonon scattering in perovskite MAPbI3 via hydrostatic pressure, 13th International Conference on Quasielastic Neutron Scattering (QENS) and 8th Workshop on Inelastic Neutron Spectrometers (WINS). 2018.
Chen Y., Novel high-pressure IV-VI compounds from a combined theoretical and experimental study, International Symposium of New Materials at Extreme Conditions. 2018.
Chen Y., Lam J., Cui Y., Shen J. and Kwok K.W., Reachable Set Estimation and Synthesis for Periodic Positive Systems, IEEE Transactions on Cybernetics. IEEE, 2019, 1 - 22.
Chen Y., Lam J., Shen J., Du B. and Li P., Reachable set estimation for switched positive systems, International Journal of Systems Science. England, Taylor & Francis Ltd, 2018, 49: 2341-2352.
Chen Y., Lam J., Cui Y. and Kwok K.W., Switched Systems Approach to State Bounding for Time Delay Systems, Information Sciences. Elsevier, 2018, 465: 191-201.
Fu L., CUI J., Yu Y., Huang Y., Wang Y., Chen Y. and He J., Achieving a fine balance between strong mechanical and high thermoelectric properties of n-type PbTe-3%Sb materials by alloying PbS, J. Mater. Chem. A. 2019, 7: 6304.
Han D., Wang X., Ding W., Chen Y., Zhang J., Xin G. and Cheng L., Phonon thermal conduction in a graphene-C3N heterobilayer using molecular dynamics simulations, Nanotechnology. 2018, 30: 075403.
LI S., Ma J., Pei Y. and Chen Y., Anharmonic lattice dynamics of Te and its counter-intuitive strain dependent lattice thermal conductivity, J. Mater. Chem. C. 2019, 7: 5970.
Li J., Zhang X., Wang X., Bu Z., Zheng L., Zhou B., XIONG F., Chen Y. and Pei Y., High performance GeTe thermoelectrics in both rhombohedral and cubic phases, J. Am. Chem. Soc.. 2018, 140: 16190.
Li J., Li W., Bu Z., Wang X., Gao B., XIONG F., Chen Y. and Pei Y., Thermoelectric transport properties of CdxBiyGe1-x-yTe alloys, ACS Appl. Mater. Interfaces. 2018, 10: 39904.
MAO J. and Chen Y., Ground-state crystal structures of superconducting Nb3Al and the phase transformation under high pressures, J. Appl. Phys.. 2018, 124: 173902.
Tang J., Gao B., Lin S., Wang X., Zhang X., XIONG F., Li W., Chen Y. and Pei Y., Manipulation of solubility and interstitial defects for improving thermoelectric SnTe alloys, ACS Energy Lett.. 2018, 3: 1969.
Tang J., Yao Z., Chen Z., Lin S., Zhang X., XIONG F., Li W., Chen Y. and Pei Y., Maximization of transporting bands for high-performance SnTe alloy thermoelectrics, Mater. Today Phys.. 2019, 9: 100091.
WANG C. and Chen Y., Phonons across order-disorder transition in AgCrSe2, Gordon Research Conference on Neutron Scattering. 2019.
Wang X., Li J., WANG C., Zhou B., Zheng L., Gao B., Chen Y. and Pei Y., Orbital alignment for high performance thermoelectric YbCd2Sb2 alloys, Chem. Mater.. 2018, 30: 5339.
Williamson I., Lawson M., LI S., Chen Y. and Li L., Metal-Site Dopants in Two-Dimensional Transition Metal Dichalcogenides, 2019 IEEE Workshop on Microelectronics and Electron Devices (WMED). 2019.
Wu Y., Chen Z., Nan P., XIONG F., Lin S., Zhang X., Chen Y., Chen L., Ge B. and Pei Y., Lattice strain advances thermoelectrices, Joule. 2019, 3: 1276.
XIA C., Chen Y. and Chen H., Coexistence of polar displacements and conduction in doped ferroelectrics: An ab initio comparative study, Phys. Rev. Materials. 2019, 3: 054405.
Xu M., Chen Y., XIONG F., Wang J., Liu Y., Lv J., Li Y., Wang Y., Chen Z. and Ma Y., A hidden symmetry-broken phase of MoS2 revealed as a superior photovoltaic material, J. Mater. Chem. A. 2018, 6: 16087.
Xu Y., Li W., WANG C., Chen Z., Wu Y., Zhang X., Li J., Lin S., Chen Y. and Pei Y., MnTe2 as a novel promising thermoelectric material, J. Materiomics. 2018, 4: 215.
YU H., Gao D., Wang X., Du X., Lin X., Guo W., Zou R., Jin C., Li K. and Chen Y., Unraveling a novel ferroelectric GeSe phase and its transformation into a topological crystalline insulator under high pressure, NPG Asia Mater.. 2018, 10: 882.
YU H., Lin X., Li K. and Chen Y., Unveiling a novel cation-rich compound in high-pressure Pb-Te binary system, ACS Cent. Sci.. 2019, 5: 683.
Yin M..., Chen Y., LEE K.H., Fu K.C.D., Tse Z.T.H. and Kwok K.W., Dynamic Modeling and Characterization of the Core-XY Cartesian Motion System, 2018 IEEE International Conference on Real-time Computing and Robotics. IEEE, 2018, 206-211.
Zhang X., Chen Y. and Yang Z., First principles study of the gas sensing 2D GeTe: atomic, electronic and transport properties, J. Phys. D: Appl. Phys.. 2018, 51: 345304.
Zhang X., Li J., Wang X., Chen Z., MAO J., Chen Y. and Pei Y., Vacancy manipulation for thermoelectric enhancements in GeTe alloys, J. Am. Chem. Soc.. 2018, 140: 15883.


Researcher : Chen Y
List of Research Outputs

Bayikadi K.S., Sankar R., Wu C.T., XIA C., Chen Y., Chen L.C., Chen K.H. and Chou F.C., Enhanced thermoelectric performance of GeTe through in situ micro domain and Ge vacancy control, J. Mater. Chem. A. 2019, 7: 15181.
CUI J., He J. and Chen Y., Delocalized carriers and the electrical transport properties of n-type GeSe crystals, ACS Appl. Energy Mater.. 2019, 2: 3703.
CUI J., Chen C., He W., Avila J., Zhao L.D., Asensio M.C., He J. and Chen Y., Large enhancement of electrical transport properties of SnS in the out-of-plane direction by n-type doping: a combined ARPES and DFT study, J. Mater. Chem. A. 2018, 6: 24588.
Chen X., Wu H., CUI J., Xiao Y., Zhang Y., He J., Chen Y., Cao J., Cai W., Pennycook S.J., Liu Z., Zhao L.D. and Sui J., Extraordinary thermoelectric performance in n-type manganese doped Mg3Sb2 Zintl: High band degeneracy, tuned carrier scattering mechanism and hierarchical microstructure, Nano Energy. 2018, 52: 246.
Chen Y., A computational study of lattice dynamics of energy materials, 10th International Conference on Materials for Advanced Technologies. 2019.
Chen Y., A computational study of lattice dynamics of energy materials, 10th International Conference on Materials for Advanced Technologies (ICMAT). 2019.
Chen Y., Computational engineering of phonon lifetime and electronic structure of energy materials, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE12). 2018.
Chen Y., Computational study of band structure engineering and anharmonic lattice dynamics, State Key Laboratory of Superhard Materials, Jilin University. 2019.
Chen Y., Distinguished Young Scholar, Natural Science Foundation of Zhejiang Province. 2019.
Chen Y., Doping Effects on the Electronic Structures and Transport Properties of GeS-Type IV-VI Crystals, TMS Annual Meeting & Exhibition. 2019.
Chen Y., Doping effects on the electronic structures and transport properties of GeS-type IV-VI crystals, The Minerals, Metals and Materials Society (TMS) Annual Meeting. 2019.
Chen Y., Editorial board member, ES Energy & Environments. 2018.
Chen Y., Electronic structure engineering of IV-VI group semiconductors, International Conference on High-Performance Ceramics (CICC-11). 2019.
Chen Y., Electronic structure engineering of IV-VI group semiconductors, The 11th International Conference on High-Performance Ceramics (CICC11). 2019.
Chen Y., Electronic structures and lattice dynamics of energy materials, Department of Physics, The Chinese University of Hong Kong. 2018.
Chen Y., Engineering phonon scattering in perovskite MAPbI3 via hydrostatic pressure, 13th International Conference on Quasielastic Neutron Scattering (QENS) and 8th Workshop on Inelastic Neutron Spectrometers (WINS). 2018.
Chen Y., Novel high-pressure IV-VI compounds from a combined theoretical and experimental study, International Symposium of New Materials at Extreme Conditions. 2018.
Chen Y., Lam J., Cui Y., Shen J. and Kwok K.W., Reachable Set Estimation and Synthesis for Periodic Positive Systems, IEEE Transactions on Cybernetics. IEEE, 2019, 1 - 22.
Chen Y., Lam J., Shen J., Du B. and Li P., Reachable set estimation for switched positive systems, International Journal of Systems Science. England, Taylor & Francis Ltd, 2018, 49: 2341-2352.
Chen Y., Lam J., Cui Y. and Kwok K.W., Switched Systems Approach to State Bounding for Time Delay Systems, Information Sciences. Elsevier, 2018, 465: 191-201.
Fu L., CUI J., Yu Y., Huang Y., Wang Y., Chen Y. and He J., Achieving a fine balance between strong mechanical and high thermoelectric properties of n-type PbTe-3%Sb materials by alloying PbS, J. Mater. Chem. A. 2019, 7: 6304.
Han D., Wang X., Ding W., Chen Y., Zhang J., Xin G. and Cheng L., Phonon thermal conduction in a graphene-C3N heterobilayer using molecular dynamics simulations, Nanotechnology. 2018, 30: 075403.
LI S., Ma J., Pei Y. and Chen Y., Anharmonic lattice dynamics of Te and its counter-intuitive strain dependent lattice thermal conductivity, J. Mater. Chem. C. 2019, 7: 5970.
Li J., Zhang X., Wang X., Bu Z., Zheng L., Zhou B., XIONG F., Chen Y. and Pei Y., High performance GeTe thermoelectrics in both rhombohedral and cubic phases, J. Am. Chem. Soc.. 2018, 140: 16190.
Li J., Li W., Bu Z., Wang X., Gao B., XIONG F., Chen Y. and Pei Y., Thermoelectric transport properties of CdxBiyGe1-x-yTe alloys, ACS Appl. Mater. Interfaces. 2018, 10: 39904.
MAO J. and Chen Y., Ground-state crystal structures of superconducting Nb3Al and the phase transformation under high pressures, J. Appl. Phys.. 2018, 124: 173902.
Tang J., Gao B., Lin S., Wang X., Zhang X., XIONG F., Li W., Chen Y. and Pei Y., Manipulation of solubility and interstitial defects for improving thermoelectric SnTe alloys, ACS Energy Lett.. 2018, 3: 1969.
Tang J., Yao Z., Chen Z., Lin S., Zhang X., XIONG F., Li W., Chen Y. and Pei Y., Maximization of transporting bands for high-performance SnTe alloy thermoelectrics, Mater. Today Phys.. 2019, 9: 100091.
WANG C. and Chen Y., Phonons across order-disorder transition in AgCrSe2, Gordon Research Conference on Neutron Scattering. 2019.
Wang X., Li J., WANG C., Zhou B., Zheng L., Gao B., Chen Y. and Pei Y., Orbital alignment for high performance thermoelectric YbCd2Sb2 alloys, Chem. Mater.. 2018, 30: 5339.
Williamson I., Lawson M., LI S., Chen Y. and Li L., Metal-Site Dopants in Two-Dimensional Transition Metal Dichalcogenides, 2019 IEEE Workshop on Microelectronics and Electron Devices (WMED). 2019.
Wu Y., Chen Z., Nan P., XIONG F., Lin S., Zhang X., Chen Y., Chen L., Ge B. and Pei Y., Lattice strain advances thermoelectrices, Joule. 2019, 3: 1276.
XIA C., Chen Y. and Chen H., Coexistence of polar displacements and conduction in doped ferroelectrics: An ab initio comparative study, Phys. Rev. Materials. 2019, 3: 054405.
Xu M., Chen Y., XIONG F., Wang J., Liu Y., Lv J., Li Y., Wang Y., Chen Z. and Ma Y., A hidden symmetry-broken phase of MoS2 revealed as a superior photovoltaic material, J. Mater. Chem. A. 2018, 6: 16087.
Xu Y., Li W., WANG C., Chen Z., Wu Y., Zhang X., Li J., Lin S., Chen Y. and Pei Y., MnTe2 as a novel promising thermoelectric material, J. Materiomics. 2018, 4: 215.
YU H., Gao D., Wang X., Du X., Lin X., Guo W., Zou R., Jin C., Li K. and Chen Y., Unraveling a novel ferroelectric GeSe phase and its transformation into a topological crystalline insulator under high pressure, NPG Asia Mater.. 2018, 10: 882.
YU H., Lin X., Li K. and Chen Y., Unveiling a novel cation-rich compound in high-pressure Pb-Te binary system, ACS Cent. Sci.. 2019, 5: 683.
Yin M..., Chen Y., LEE K.H., Fu K.C.D., Tse Z.T.H. and Kwok K.W., Dynamic Modeling and Characterization of the Core-XY Cartesian Motion System, 2018 IEEE International Conference on Real-time Computing and Robotics. IEEE, 2018, 206-211.
Zhang X., Chen Y. and Yang Z., First principles study of the gas sensing 2D GeTe: atomic, electronic and transport properties, J. Phys. D: Appl. Phys.. 2018, 51: 345304.
Zhang X., Li J., Wang X., Chen Z., MAO J., Chen Y. and Pei Y., Vacancy manipulation for thermoelectric enhancements in GeTe alloys, J. Am. Chem. Soc.. 2018, 140: 15883.


Researcher : Chen Y
List of Research Outputs

Bayikadi K.S., Sankar R., Wu C.T., XIA C., Chen Y., Chen L.C., Chen K.H. and Chou F.C., Enhanced thermoelectric performance of GeTe through in situ micro domain and Ge vacancy control, J. Mater. Chem. A. 2019, 7: 15181.
CUI J., He J. and Chen Y., Delocalized carriers and the electrical transport properties of n-type GeSe crystals, ACS Appl. Energy Mater.. 2019, 2: 3703.
CUI J., Chen C., He W., Avila J., Zhao L.D., Asensio M.C., He J. and Chen Y., Large enhancement of electrical transport properties of SnS in the out-of-plane direction by n-type doping: a combined ARPES and DFT study, J. Mater. Chem. A. 2018, 6: 24588.
Chen X., Wu H., CUI J., Xiao Y., Zhang Y., He J., Chen Y., Cao J., Cai W., Pennycook S.J., Liu Z., Zhao L.D. and Sui J., Extraordinary thermoelectric performance in n-type manganese doped Mg3Sb2 Zintl: High band degeneracy, tuned carrier scattering mechanism and hierarchical microstructure, Nano Energy. 2018, 52: 246.
Chen Y., A computational study of lattice dynamics of energy materials, 10th International Conference on Materials for Advanced Technologies. 2019.
Chen Y., A computational study of lattice dynamics of energy materials, 10th International Conference on Materials for Advanced Technologies (ICMAT). 2019.
Chen Y., Computational engineering of phonon lifetime and electronic structure of energy materials, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE12). 2018.
Chen Y., Computational study of band structure engineering and anharmonic lattice dynamics, State Key Laboratory of Superhard Materials, Jilin University. 2019.
Chen Y., Distinguished Young Scholar, Natural Science Foundation of Zhejiang Province. 2019.
Chen Y., Doping Effects on the Electronic Structures and Transport Properties of GeS-Type IV-VI Crystals, TMS Annual Meeting & Exhibition. 2019.
Chen Y., Doping effects on the electronic structures and transport properties of GeS-type IV-VI crystals, The Minerals, Metals and Materials Society (TMS) Annual Meeting. 2019.
Chen Y., Editorial board member, ES Energy & Environments. 2018.
Chen Y., Electronic structure engineering of IV-VI group semiconductors, International Conference on High-Performance Ceramics (CICC-11). 2019.
Chen Y., Electronic structure engineering of IV-VI group semiconductors, The 11th International Conference on High-Performance Ceramics (CICC11). 2019.
Chen Y., Electronic structures and lattice dynamics of energy materials, Department of Physics, The Chinese University of Hong Kong. 2018.
Chen Y., Engineering phonon scattering in perovskite MAPbI3 via hydrostatic pressure, 13th International Conference on Quasielastic Neutron Scattering (QENS) and 8th Workshop on Inelastic Neutron Spectrometers (WINS). 2018.
Chen Y., Novel high-pressure IV-VI compounds from a combined theoretical and experimental study, International Symposium of New Materials at Extreme Conditions. 2018.
Chen Y., Lam J., Cui Y., Shen J. and Kwok K.W., Reachable Set Estimation and Synthesis for Periodic Positive Systems, IEEE Transactions on Cybernetics. IEEE, 2019, 1 - 22.
Chen Y., Lam J., Shen J., Du B. and Li P., Reachable set estimation for switched positive systems, International Journal of Systems Science. England, Taylor & Francis Ltd, 2018, 49: 2341-2352.
Chen Y., Lam J., Cui Y. and Kwok K.W., Switched Systems Approach to State Bounding for Time Delay Systems, Information Sciences. Elsevier, 2018, 465: 191-201.
Fu L., CUI J., Yu Y., Huang Y., Wang Y., Chen Y. and He J., Achieving a fine balance between strong mechanical and high thermoelectric properties of n-type PbTe-3%Sb materials by alloying PbS, J. Mater. Chem. A. 2019, 7: 6304.
Han D., Wang X., Ding W., Chen Y., Zhang J., Xin G. and Cheng L., Phonon thermal conduction in a graphene-C3N heterobilayer using molecular dynamics simulations, Nanotechnology. 2018, 30: 075403.
LI S., Ma J., Pei Y. and Chen Y., Anharmonic lattice dynamics of Te and its counter-intuitive strain dependent lattice thermal conductivity, J. Mater. Chem. C. 2019, 7: 5970.
Li J., Zhang X., Wang X., Bu Z., Zheng L., Zhou B., XIONG F., Chen Y. and Pei Y., High performance GeTe thermoelectrics in both rhombohedral and cubic phases, J. Am. Chem. Soc.. 2018, 140: 16190.
Li J., Li W., Bu Z., Wang X., Gao B., XIONG F., Chen Y. and Pei Y., Thermoelectric transport properties of CdxBiyGe1-x-yTe alloys, ACS Appl. Mater. Interfaces. 2018, 10: 39904.
MAO J. and Chen Y., Ground-state crystal structures of superconducting Nb3Al and the phase transformation under high pressures, J. Appl. Phys.. 2018, 124: 173902.
Tang J., Gao B., Lin S., Wang X., Zhang X., XIONG F., Li W., Chen Y. and Pei Y., Manipulation of solubility and interstitial defects for improving thermoelectric SnTe alloys, ACS Energy Lett.. 2018, 3: 1969.
Tang J., Yao Z., Chen Z., Lin S., Zhang X., XIONG F., Li W., Chen Y. and Pei Y., Maximization of transporting bands for high-performance SnTe alloy thermoelectrics, Mater. Today Phys.. 2019, 9: 100091.
WANG C. and Chen Y., Phonons across order-disorder transition in AgCrSe2, Gordon Research Conference on Neutron Scattering. 2019.
Wang X., Li J., WANG C., Zhou B., Zheng L., Gao B., Chen Y. and Pei Y., Orbital alignment for high performance thermoelectric YbCd2Sb2 alloys, Chem. Mater.. 2018, 30: 5339.
Williamson I., Lawson M., LI S., Chen Y. and Li L., Metal-Site Dopants in Two-Dimensional Transition Metal Dichalcogenides, 2019 IEEE Workshop on Microelectronics and Electron Devices (WMED). 2019.
Wu Y., Chen Z., Nan P., XIONG F., Lin S., Zhang X., Chen Y., Chen L., Ge B. and Pei Y., Lattice strain advances thermoelectrices, Joule. 2019, 3: 1276.
XIA C., Chen Y. and Chen H., Coexistence of polar displacements and conduction in doped ferroelectrics: An ab initio comparative study, Phys. Rev. Materials. 2019, 3: 054405.
Xu M., Chen Y., XIONG F., Wang J., Liu Y., Lv J., Li Y., Wang Y., Chen Z. and Ma Y., A hidden symmetry-broken phase of MoS2 revealed as a superior photovoltaic material, J. Mater. Chem. A. 2018, 6: 16087.
Xu Y., Li W., WANG C., Chen Z., Wu Y., Zhang X., Li J., Lin S., Chen Y. and Pei Y., MnTe2 as a novel promising thermoelectric material, J. Materiomics. 2018, 4: 215.
YU H., Gao D., Wang X., Du X., Lin X., Guo W., Zou R., Jin C., Li K. and Chen Y., Unraveling a novel ferroelectric GeSe phase and its transformation into a topological crystalline insulator under high pressure, NPG Asia Mater.. 2018, 10: 882.
YU H., Lin X., Li K. and Chen Y., Unveiling a novel cation-rich compound in high-pressure Pb-Te binary system, ACS Cent. Sci.. 2019, 5: 683.
Yin M..., Chen Y., LEE K.H., Fu K.C.D., Tse Z.T.H. and Kwok K.W., Dynamic Modeling and Characterization of the Core-XY Cartesian Motion System, 2018 IEEE International Conference on Real-time Computing and Robotics. IEEE, 2018, 206-211.
Zhang X., Chen Y. and Yang Z., First principles study of the gas sensing 2D GeTe: atomic, electronic and transport properties, J. Phys. D: Appl. Phys.. 2018, 51: 345304.
Zhang X., Li J., Wang X., Chen Z., MAO J., Chen Y. and Pei Y., Vacancy manipulation for thermoelectric enhancements in GeTe alloys, J. Am. Chem. Soc.. 2018, 140: 15883.


Researcher : Chen YH
Project Title:Design for manufacturing constrained topology optimization with feature based automatic CAD model reconstruction
Investigator(s):Chen YH
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:Upper torso humanoid robot with highly compliant arms
Investigator(s):Chen YH, Lam J, Chen MZ
Department:Mechanical Engg
Source(s) of Funding:Matching Grant for Joint Research
Start Date:06/2015


Project Title:Upper Torso Humanoid Robot with Highly Compliant Arms
Investigator(s):Chen YH, Lam J, Chen MZ
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:10/2015


Project Title:Upper torso humanoid robot with highly compliant arms
Investigator(s):Chen YH, Lam J, Chen MZ
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:10/2015


Project Title:Passive controller synthesis with application to low-order mechanical vibration control systems
Investigator(s):Chen YH, Huang L
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:07/2016


Project Title:Study on Novel Approaches to Controllable and Variable Stiffness Soft Robotics
Investigator(s):Chen YH
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2017


Project Title:Investigation of non-contact actuation and stiffening of soft robotics
Investigator(s):Chen YH
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2019


List of Research Outputs

Chen Y.H. and Choi S.H., Precharged Pneumatic Soft Actuators and Their Applications to Untethered Soft Robots, Soft Robot. 2018.
Chen Y.H., Smart Soft Robotics, The 15th China-Asean Expo. 2018.
Hu Y.I.N.L.O.N.G., Wang K.A.I., Chen Y.H. and Chen M.Z., Inerter-based semi-active suspensions with low-order mechanical admittance via network synthesis, Transaction of Institute of Measurement and Control. 2018, 40: 4233-4245.
Jiang P., Yang Y., Chen M.Z. and Chen Y.H., A variable stiffness gripper based on differential drive particle jamming, Bioinspiration & Biomimetics. iop, 2019, 14.
LI Y., Chen Y.H. and LI Y., Pre-charged pneumatic soft gripper with close loop control, In: IEEE Robotics and Automation Letters, IEEE Robotics and Automation Letters. 2019.
LI Y., Chen Y.H., YANG Y. and LI Y., Soft Robotic Grippers Based on Particle Transmission, IEEE/ASME Transaction on Mechatronics.. 2019.
LIU H., Chen M.Z. and Chen Y.H., When joggers meet robots: the past, present, and future of research on humanoid robots, Bio-Design and Manufacturing. 2019.
ZHOU J., CHEN X., Chang U., Liu Y., Chen Y.H. and Wang Z., A Grasping Component Mapping Approach for Soft Robotic End-Effector Control, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). 2019.


Researcher : Cheung KC
Project Title:14th World Congress of International Federation of Automatic Control A Fast On-Line Training Algorithm for Neurofuzzy Networks
Investigator(s):Cheung KC
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:07/1999


Project Title:A study on the use of fuel cells as replacement for lead-acid batteries in solar-based electrical power generation
Investigator(s):Cheung KC
Department:Mechanical Engg
Source(s) of Funding:Low Budget High Impact Programme
Start Date:11/2001


Project Title:A study on solar-powered water electrolysis for hydrogen production
Investigator(s):Cheung KC
Department:Mechanical Engg
Source(s) of Funding:Small Project Funding
Start Date:11/2002


List of Research Outputs

Meng M., Lam J., Feng J. and Cheung K.C., Stability and Guaranteed Cost Analysis of Time-Triggered Boolean Networks, IEEE Transactions on Neural Networks and Learning Systems. USA, IEEE-Inst Electrical Electronics Engineers Inc, 2018, 29: 3893-3899.
Meng M., Lam J., Feng J. and Cheung K.C., Stability and Stabilization of Boolean Networks with Stochastic Delays, IEEE Transactions on Automatic Control. USA, IEEE-Inst Electrical Electronics Engineers Inc, 2019, 64(2): 1-1.


Researcher : Chow KW
Project Title:Nonlinear localized modes and their dynamics: applications in hydrodynamics and optics
Investigator(s):Chow KW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2006


Project Title:Dissipative localized modes: pulses and fronts in complex Ginzburg - Landau models
Investigator(s):Chow KW
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:An integrated platform for analysis and surgical training of aneurysms and dissections in major arteries
Investigator(s):Chow KW, Cheng SWK, Yu ACH, Chan KW
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:12/2011


Project Title:Higher order nonlinear Schrodinger models in hydrodynamics: propagating modes and rogue waves
Investigator(s):Chow KW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2014


Project Title:Stroke and Intracranial Aneurysms: Patient Specific Computational and Phantom Studies
Investigator(s):Chow KW, Leung GKK, Chan KW, Chan KL
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:03/2014


Project Title:Fluid-Structure Interaction Analysis of Cerebral Aneurysms: Improved Assessments of Risk Factors
Investigator(s):Chow KW, Sze KY, Leung GKK, Tsang COA, Mak HKF
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Support Programme (Tier 3)
Start Date:12/2015


Project Title:Rogue Waves in Systems with Multiple Waveguides
Investigator(s):Chow KW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2016


Project Title:Employing Rogue Waves to Understand Extreme and Rare Events in Nonlinear Science
Investigator(s):Chow KW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


List of Research Outputs

CHIU T.L., Tang Y.S., Cheng S.W.K. and Chow K.W., Analysis of flow patterns on branched endografts for aortic arch aneurysms, Informatics in Medicine Unlocked. Elsevier, 2018, 13: 62-70.
Chan H.N., Grimshaw R.H.J. and Chow K.W., Modeling internal rogue waves in a long wave-short wave resonance framework, Physical Review Fluids. USA, AMER Physical Soc, 2018, 3(12): 124801-18.
Chan H.N. and Chow K.W., Numerical Investigation of the Dynamics of ‘Hot Spots’ as Models of Dissipative Rogue Waves, Applied Sciences. Switzerland, MDPI, 2018, 8(8): 1223.
Chan H.N. and Chow K.W., Periodic and localized wave patterns for coupled Ablowitz-Ladik systems with negative cross phase modulation, Communications in Nonlinear Science and Numerical Simulation. Netherlands, Elsevier Science BV, 2018, 65: 185-195.
Chow K.W., Chan H.N. and Grimshaw R.H.J., Brief communication: Modulation instability of internal waves in a smoothly stratified shallow fluid with a constant buoyancy frequency, Natural Hazards and Earth System Sciences. Germany, Copernicus Gesellschaft MBH, 2019, 19(3): 583-587.
LIU T., Chan H.N., Grimshaw R.H.J. and Chow K.W., Internal rogue waves in stratified flows and the dynamics of wave packets, Nonlinear Analysis: Real World Applications. England, Pergamon-elsevier Science Ltd, 2018, 44: 449-464.
PAN Q., CHUNG W.C. and Chow K.W., The coupled Hirota system as an example displaying discrete breathers: Rogue waves, modulation instability and varying cross-phase modulations, AIP Advances. USA, AMER Inst Physics, 2018, 8(9): 095303-15.


Researcher : Chung C
List of Research Outputs

CHENG R., Chung C., Zhang H., ZHOU Z., Zhai P., Huang Y.T., Lee H. and Feng S.P.T., An Air Knife-Assisted Recrystallization Method for Ambient-Process Planar Perovskite Solar Cells and Its Dim-Light Harvesting, Small. 2019, 15: 1804465.


Researcher : Cui Y
List of Research Outputs

Chen Y., Lam J., Cui Y., Shen J. and Kwok K.W., Reachable Set Estimation and Synthesis for Periodic Positive Systems, IEEE Transactions on Cybernetics. IEEE, 2019, 1 - 22.


Researcher : DONG Z
List of Research Outputs

DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., Tao Y., Lee A.P.W. and Kwok K.W., Best Poster Paper Award (2nd place), 2019 IEEE International Conference on Robotics and Automation (ICRA’19) workshop on Surgical Robots, sponsored by Intuitive Surgical Inc.. 2019.
DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., TAO Y., LEE A.P.W. and Kwok K.W., Experimental Validation of Autonomous Motion Control with Standard Cardiac Electrophysiology Catheter, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems. 2019.
DONG Z., GUO Z., Lee K.H., FANG G., Tang W.L., Chang H.C.C., Chan D.T.M. and Kwok K.W., High-performance Continuous Hydraulic Motor for MR Safe Robotic Teleoperation, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1964-1971.
DONG Z., Kwok K.W., GUO Z. and Lee K.H., PCT Patent: Fluid Powered Master-Slave Actuation for MRI-Guided Interventions, PCT/IB2019/051877 , 2019.
GUO Z., Kwok K.W., DONG Z., Lee K.H., FU H.C. and CHEUNG C.L., PCT Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, PCT/CN2019/072961 , 2019.
Kwok K.W., DONG Z., HE Z., FU H.C., CHEUNG C.L., Wong H.W., Lee C.Y., Bozzolan A.F., Lau Y.H., Ng M.C., Lo T.F., Tseng W., Lo K.M., Yeung K.H., Cheung K.H., Yeung S.H., Tung W.L. and Chan W.H., First Runner-up Award, Robocon 2019 Hong Kong Contest “Great Urtuu”. 2019.


Researcher : Deng Y
List of Research Outputs

Deng Y., MA Q., YUAN H., Lum G. and Shum H.C., Development of dual-component protein microparticles in all-aqueous systems for biomedical applications, Journal of Materials Chemistry B. Royal Society of Chemistry (RSC), 2019, 19: 3059-3065.


Researcher : FAN C
List of Research Outputs

FAN C., Lam J. and XIE X., Peak-to-peak filtering for periodic piecewise linear polytopic systems, International Journal of Systems Science. 2018, 49(9): 1997-2011.
XIE X., Lam J. and FAN C., Robust time-weighted guaranteed cost control of uncertain periodic piecewise linear systems, Information Sciences. USA, Elsevier Science Inc, 2018, 460-461: 238-253.


Researcher : FAN Y
List of Research Outputs

FAN Y., Hunt J., YIN S. and Li Y., Mean shear flow in recirculating turbulent urban convection and the plume-puff eddy structure below stably stratified inversion layers, Theoretical and Applied Climatology. 2019, 135: 1485-1499.
Fan Y., Li Y. and Yin S., Non-uniform ground-level wind patterns in a heat dome over a uniformly heated non-circular city, International Journal of Heat and Mass Transfer. 2018, 124: 233-246.
WANG Q., WANG Y., FAN Y., Hang J. and Li Y., Urban heat island circulations of an idealized circular city as affected by background wind speed, Building and Environment. 2019, 148: 433-447.
YIN S., Li Y., FAN Y. and Sandberg M., Experimental investigation of near-field stream-wise flow development and spatial structure in triple buoyant plumes, Building and Environment. 2019, 149: 79-89.
Yin S., Li Y., Fan Y. and Sandberg M., Unsteady large-scale flow patterns and dynamic vortex movement in near-field triple buoyant plumes, Building and Environment. 2018, 142: 288-300.


Researcher : FANG C
List of Research Outputs

FANG C., Deformation Dynamics of Cells, Their Membrane and Nuclei, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-119.
FANG C., HUI T.H., WEI X., YAN Z., Qian J. and Lin Y., Interaction and fusion dynamics between cellular blebs, Journal of Biomechanics. 2018, 81: 113-121.
GONG Z., FANG C., You R., SHAO X., WEI X., Chang R.C.C. and Lin Y., Distinct Relaxation Timescales of Neurites Revealed by Rate-dependent Indentation, Relaxation and Micro-rheology Tests, Soft Matter. 2019, 15: 166-174.
SHAO X., You R., HUI T.H., FANG C., GONG Z., YAN Z., Chang R.C.C., Shenoy V.B. and Lin Y., Tension- and Adhesion-Regulated Retraction of Injured Axons, Biophysical Journal. 2019, 117: 193-202.


Researcher : FANG G
List of Research Outputs

DONG Z., GUO Z., Lee K.H., FANG G., Tang W.L., Chang H.C.C., Chan D.T.M. and Kwok K.W., High-performance Continuous Hydraulic Motor for MR Safe Robotic Teleoperation, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1964-1971.
FANG G., WANG X., WANG K., Lee K.H., HO J.D.-.L., FU H.C., Fu K.C.D. and Kwok K.W., Vision-based Online Learning Control for Soft Robots using Local Gaussian Process Regression, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1194-1201.
LI Z., FANG G., HO J.D.-.L., LAM C.I., YIM Y.W., CHAN J.Y.K. and Kwok K.W., Augmented Reality-Guided Visual Servoing for Flexible Endoscope Control, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems, 2019.


Researcher : FU HC
List of Research Outputs

FANG G., WANG X., WANG K., Lee K.H., HO J.D.-.L., FU H.C., Fu K.C.D. and Kwok K.W., Vision-based Online Learning Control for Soft Robots using Local Gaussian Process Regression, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1194-1201.
GUO Z., Kwok K.W., DONG Z., Lee K.H., FU H.C. and CHEUNG C.L., PCT Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, PCT/CN2019/072961 , 2019.
Kwok K.W., DONG Z., HE Z., FU H.C., CHEUNG C.L., Wong H.W., Lee C.Y., Bozzolan A.F., Lau Y.H., Ng M.C., Lo T.F., Tseng W., Lo K.M., Yeung K.H., Cheung K.H., Yeung S.H., Tung W.L. and Chan W.H., First Runner-up Award, Robocon 2019 Hong Kong Contest “Great Urtuu”. 2019.


Researcher : FU X
List of Research Outputs

FU X., ZHANG Y., YUAN H., Binks B.P. and Shum H.C., Controlled Actuation of Liquid Marbles on a Dielectric, ACS Applied Materials and Interfaces. American Chemical Society (ACS), 2018, 10: 34822-34827.
FU X., Manipulation of Liquid Marbles by Electric Field and Its Applications, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-81.


Researcher : FUNG ML
List of Research Outputs

FUNG M.L., A Study of Sensor Fusion of a Depth Camera and Ultrasonic Sensor, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-64.


Researcher : Fan Y
List of Research Outputs

FAN Y., Hunt J., YIN S. and Li Y., Mean shear flow in recirculating turbulent urban convection and the plume-puff eddy structure below stably stratified inversion layers, Theoretical and Applied Climatology. 2019, 135: 1485-1499.
Fan Y., Li Y. and Yin S., Non-uniform ground-level wind patterns in a heat dome over a uniformly heated non-circular city, International Journal of Heat and Mass Transfer. 2018, 124: 233-246.
WANG Q., WANG Y., FAN Y., Hang J. and Li Y., Urban heat island circulations of an idealized circular city as affected by background wind speed, Building and Environment. 2019, 148: 433-447.
YIN S., Li Y., FAN Y. and Sandberg M., Experimental investigation of near-field stream-wise flow development and spatial structure in triple buoyant plumes, Building and Environment. 2019, 149: 79-89.
Yin S., Li Y., Fan Y. and Sandberg M., Unsteady large-scale flow patterns and dynamic vortex movement in near-field triple buoyant plumes, Building and Environment. 2018, 142: 288-300.


Researcher : Feng SPT
Project Title:Multi-scale investigation of interface dominated multiferroic nanostructures (IDMNS) and exploration of potential applications
Investigator(s):Feng SPT, Soh AK
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2012


Project Title:Development of TiO2 Slurry with Functional Metal Oxides or Polymers for Dye-sensitized Solar Cell
Investigator(s):Feng SPT, Liu F
Department:Mechanical Engg
Source(s) of Funding:Platform Research Projects
Start Date:08/2012


Project Title:Contact fabrication and its study for high-performance solar thermoelectric generators
Investigator(s):Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Early Career Scheme (ECS)
Start Date:10/2012


Project Title:Investigation of electrical conduction enhancement in stable graphite suspensions
Investigator(s):Feng SPT
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2013


Project Title:Thermal-charging supercapacitors
Investigator(s):Feng SPT
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:10/2014


Project Title:Thermal capacitive electrochemical cycle for converting low-grade heat to electricity
Investigator(s):Feng SPT
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:09/2016


Project Title:EMN Meeting on Alloys and Compounds (Energy Materails Nanotechnology); Electrochemical Fabrication of Japonica-like Silver Flowers
Investigator(s):Feng SPT
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:10/2016


Project Title:Solution-Based Synthesis of Ultrasmall Nb2O5 Nanoparticles and its application in Dye-Sensitized and Perovskite Solar Cells
Investigator(s):Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:02/2017
Completion Date:01/2019


Project Title:Direct Solar Conversion of CO2 to Hydrocarbon Fuels: Development and Application of Earth-abundant CuOx/Fe,Cu-doped Ni(oxy)hydroxide/TiO2 Photocatalysts
Investigator(s):Feng SPT, Li W
Department:Mechanical Engg
Source(s) of Funding:Environment and Conservation Fund
Start Date:12/2017


Project Title:Electrochemical ablation of two-dimensional metal diselenide monolayers and their catalytic application for CO2 conversion
Investigator(s):Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:02/2018


Project Title:Searching for a better asymmetric thermo-electrochemical system to convert low-grade heat into electricity
Investigator(s):Feng SPT
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:09/2018


Project Title:Development of tough thermochromic hydrogel film for smart windows
Investigator(s):Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:05/2019


Project Title:Ambient-Process Perovskite Solar Cells by Air-Knife Assisted Recrystallization Method and Its Dim-Light Harvesting Application
Investigator(s):Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2019


List of Research Outputs

CHEN J., Liu C., Huang Y.T., Lee H. and Feng S.P.T., Study of the growth mechanisms of nanoporous Ag flowers for non-enzymatic glucose detection, Nanotechnology. 2018, 29: 505501.
CHENG R., Chung C., Zhang H., ZHOU Z., Zhai P., Huang Y.T., Lee H. and Feng S.P.T., An Air Knife-Assisted Recrystallization Method for Ambient-Process Planar Perovskite Solar Cells and Its Dim-Light Harvesting, Small. 2019, 15: 1804465.
Cai J., Zhang M., Sun Z., Zhang C., Liang C., Khan A., Ning X.H., Ge H.X., Feng S.P.T. and Li W., Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics, Journal of Materials Chemistry C. 2019, 7(15): 4363-4373.
Lee H., HUANG Y.-.T., HORN M. and Feng S.P.T., Engineered optical and electrical performance of rf-sputtered undoped nickel oxide thin films for inverted perovskite solar cells, Scientific Reports. 2018, 8.
Li X.H., Liu C., Feng S.P.T. and Fang N.X.L., Broadband Light Management with Thermochromic Hydrogel Microparticles for Smart Windows, Joule. 2019, 3: 290-302.
Puchakayala S. and Feng S.P.T., High-index facet defined shape-controlled electrochemical synthesis of nanocrystals: A mini review, Electrochemistry Communications. 2018, 94: 64-69.
XU Z., CHEN M., Lee H., Feng S.P.T., Park J.Y., Lee S. and Kim J., X-ray-Powered Micromotors, ACS Applied Materials & Interfaces. 2019, 11: 15727-15732.
YANG Z., ZHOU Z., Guo H., Yao Z., Ma X., Song X., Feng S.P.T. and Tang C., Tannic Acid/Fe 3+ Nanoscaffold for Interfacial Polymerization: Toward Enhanced Nanofiltration Performance , Environmental Science & Technology. 2018, 52: 9341-9349.
Yang Z., Huang X., Ma X., ZHOU Z., Guo H., Yao Z., Feng S.P.T. and Tang C., Fabrication of a novel and green thin-film composite membrane containing nanovoids for water purification, Journal of Membrane Science. 2019, 570-571: 314-321.
ZHOU Z., Zhang Z., Wu Q.S., Ji X., Wang J.L., Zeng X.C., Feng S.P.T. and Chan K.L., Inch-Scale Grain Boundary Free Organic Crystals Developed by Nucleation Seed-Controlled Shearing Method, ACS Applied Materials & Interfaces. 2018, 10: 35395-35403.
Zhai P., CHENG R., REN L., Huang Y.T., Lee H. and Feng S.P.T., In Situ Interface Engineering of TiO 2 Nanocrystals for Fully Ambient-Processed Perovskite Solar Cells , Solar RRL. 2018, 1800103.


Researcher : Fu KCD
List of Research Outputs

FANG G., WANG X., WANG K., Lee K.H., HO J.D.-.L., FU H.C., Fu K.C.D. and Kwok K.W., Vision-based Online Learning Control for Soft Robots using Local Gaussian Process Regression, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1194-1201.
Yin M..., Chen Y., LEE K.H., Fu K.C.D., Tse Z.T.H. and Kwok K.W., Dynamic Modeling and Characterization of the Core-XY Cartesian Motion System, 2018 IEEE International Conference on Real-time Computing and Robotics. IEEE, 2018, 206-211.


Researcher : Fu SC
List of Research Outputs

Lee H.H., Cheung Y.S., Fu S.C. and Chao Y.H.C., Study of Particle Resuspension from Dusty Surfaces Using a Centrifugal Method, Indoor Air. 2019, 29: 791-802.
Leung W.T., Fu S.C. and Chao Y.H.C., Detachment of bacteria-laden droplet from dusty surface by centrifugal method, 11th Asian Aerosol Conference. 2019.
Xu H.L., Fu S.C., Leung W.T., Lai T.W. and Chao Y.H.C., Enhancement of submicron particle deposition on a semi-circular surface in turbulent flow, Indoor and Built Environment. 2019, 1420326X1985386.
Zhong X.L., Fu S.C. and Chao Y.H.C., An Experimental Study of Particle Deposition on Micro-ribbed Surface in a Chamber, 11th Asian Aerosol Conference. 2019.


Researcher : GAN K
List of Research Outputs

Fan H., Ngan A.H.W., GAN K. and El-Awady J.A., Origin of double-peak precipitation hardening in metallic alloys, International Journal of Plasticity. Elsevier, 2018, 111: 152-167.
GAN K., Deformation of Metallic Materials with Real Microstructures in Small Scale, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-178.


Researcher : GONG Z
List of Research Outputs

GONG Z., FANG C., You R., SHAO X., WEI X., Chang R.C.C. and Lin Y., Distinct Relaxation Timescales of Neurites Revealed by Rate-dependent Indentation, Relaxation and Micro-rheology Tests, Soft Matter. 2019, 15: 166-174.
SHAO X., You R., HUI T.H., FANG C., GONG Z., YAN Z., Chang R.C.C., Shenoy V.B. and Lin Y., Tension- and Adhesion-Regulated Retraction of Injured Axons, Biophysical Journal. 2019, 117: 193-202.


Researcher : GUAN Q
List of Research Outputs

GUAN Q., Zheng L. and Wang M., Cancer cell targeting, imaging and combined chemo-photothermal therapy by core-shell structured theranostics, Materials Science & Technology 2018 Conference & Exhibition. Columbus, USA, 2018, 1 pp.


Researcher : GUO L
List of Research Outputs

GUO L. and Wang M., Fabrication and performance of nanofibrous cell- and growth factor-incorporated tissue engineering scaffolds, 43rd International Conference and Exposition on Advanced Ceramics and Composites (ICACC’19). Daytona Beach, USA, 2019, 1 pp.
GUO L. and Wang M., Growth factor-encapsulated and cell-laden scaffolds for gastrointestinal tract regeneration, Materials Science & Technology 2018 Conference & Exhibition. Columbus, USA, 2018, 1 pp.
GUO L., Novel Cell-laden Scaffolds Embedded with Theranostics for Postoperative Cancer Patients, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-355.
Wang M., Guo L. and SUN H., Manufacturing technologies for biomaterials, In: Chief Editor: Roger J. Narayan, Encyclopedia of Biomedical Engineering. The Netherlands, Elsevier, 2019, 1: 116-134.
Wu J., SUN H., GUO L. and Wang M., Continuous wet spinning and dug-loaded wet-spun fibers, 43rd International Conference and Exposition on Advanced Ceramics and Composites (ICACC’19). Daytona Beach, USA, 2019, 1 pp.


Researcher : GUO Z
List of Research Outputs

DONG Z., GUO Z., Lee K.H., FANG G., Tang W.L., Chang H.C.C., Chan D.T.M. and Kwok K.W., High-performance Continuous Hydraulic Motor for MR Safe Robotic Teleoperation, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1964-1971.
DONG Z., Kwok K.W., GUO Z. and Lee K.H., PCT Patent: Fluid Powered Master-Slave Actuation for MRI-Guided Interventions, PCT/IB2019/051877 , 2019.
GUO Z., Fluid-driven Robotic Systems for Intraoperative MRI-guided Interventions, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-220.
GUO Z., Kwok K.W., DONG Z., Lee K.H., FU H.C. and CHEUNG C.L., PCT Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, PCT/CN2019/072961 , 2019.
GUO Z., LEONG C.W.M., Su H., Kwok K.W., Chan D.T.M. and Poon W.S., Techniques for Stereotactic Neurosurgery: Beyond the Frame, Towards the Intraoperative Magnetic Resonance Imaging-guided and Robot-assisted Approaches, World Neurosurgery. 2018, 116: 77-87.
Kwok K.W., CHEUNG C.L., HO J.D.-.L., GUO Z., Chang H.C.C. and Vardhanabhuti V., PCT Patent: MRI Tracking Device Design, Fabrication, and Methods of use for MRI-Guided Robotic System, PCT/IB2019/051945 , 2019.
Tang S.C., LUN T.L.T., GUO Z., Kwok K.W. and McDannold N.J., First Place Prize Paper Award , 2017 IEEE Transactions on Power Electronics. 2018.


Researcher : Guo L
List of Research Outputs

GUO L. and Wang M., Fabrication and performance of nanofibrous cell- and growth factor-incorporated tissue engineering scaffolds, 43rd International Conference and Exposition on Advanced Ceramics and Composites (ICACC’19). Daytona Beach, USA, 2019, 1 pp.
GUO L. and Wang M., Growth factor-encapsulated and cell-laden scaffolds for gastrointestinal tract regeneration, Materials Science & Technology 2018 Conference & Exhibition. Columbus, USA, 2018, 1 pp.
GUO L., Novel Cell-laden Scaffolds Embedded with Theranostics for Postoperative Cancer Patients, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-355.
Wang M., Guo L. and SUN H., Manufacturing technologies for biomaterials, In: Chief Editor: Roger J. Narayan, Encyclopedia of Biomedical Engineering. The Netherlands, Elsevier, 2019, 1: 116-134.
Wu J., SUN H., GUO L. and Wang M., Continuous wet spinning and dug-loaded wet-spun fibers, 43rd International Conference and Exposition on Advanced Ceramics and Composites (ICACC’19). Daytona Beach, USA, 2019, 1 pp.


Researcher : HAN X
List of Research Outputs

HAN X., Kang Z., Tian X. and Wang L., Experimental observations on the interface front of phase change material inside cylindrical cavity, Energy Storage. 2019, 1: e36.


Researcher : HE Z
List of Research Outputs

DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., Tao Y., Lee A.P.W. and Kwok K.W., Best Poster Paper Award (2nd place), 2019 IEEE International Conference on Robotics and Automation (ICRA’19) workshop on Surgical Robots, sponsored by Intuitive Surgical Inc.. 2019.
DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., TAO Y., LEE A.P.W. and Kwok K.W., Experimental Validation of Autonomous Motion Control with Standard Cardiac Electrophysiology Catheter, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems. 2019.
Kwok K.W., DONG Z., HE Z., FU H.C., CHEUNG C.L., Wong H.W., Lee C.Y., Bozzolan A.F., Lau Y.H., Ng M.C., Lo T.F., Tseng W., Lo K.M., Yeung K.H., Cheung K.H., Yeung S.H., Tung W.L. and Chan W.H., First Runner-up Award, Robocon 2019 Hong Kong Contest “Great Urtuu”. 2019.


Researcher : HO JD-L
List of Research Outputs

DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., Tao Y., Lee A.P.W. and Kwok K.W., Best Poster Paper Award (2nd place), 2019 IEEE International Conference on Robotics and Automation (ICRA’19) workshop on Surgical Robots, sponsored by Intuitive Surgical Inc.. 2019.
DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., TAO Y., LEE A.P.W. and Kwok K.W., Experimental Validation of Autonomous Motion Control with Standard Cardiac Electrophysiology Catheter, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems. 2019.
FANG G., WANG X., WANG K., Lee K.H., HO J.D.-.L., FU H.C., Fu K.C.D. and Kwok K.W., Vision-based Online Learning Control for Soft Robots using Local Gaussian Process Regression, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1194-1201.
HO J.D.-.L., LEE K.H., Tang W.L., Hui K.M., Althoefer K., Lam J. and Kwok K.W., Localised Online Learning-Based Control of a Soft Redundant Manipulator Under Variable Loading, Advanced Robotics. 2018, 32(21): 1-16.
Kwok K.W., LUN T.L.T., HO J.D.-.L., Lee K.H. and Wong K.K.Y., CN Patent: Real-time Surface Shape Sensing for Flexible Structures Using Fiber Bragg Gratings, CN 201910552110.1, 2019.
Kwok K.W., CHEUNG C.L., HO J.D.-.L., GUO Z., Chang H.C.C. and Vardhanabhuti V., PCT Patent: MRI Tracking Device Design, Fabrication, and Methods of use for MRI-Guided Robotic System, PCT/IB2019/051945 , 2019.
Kwok K.W., LUN T.L.T., HO J.D.-.L., Lee K.H. and Wong K.K.Y., US Patent: Real-time Surface Shape Sensing for Flexible Structures Using Fiber Bragg Gratings, US 16/449,063, 2019.
LI Z., FANG G., HO J.D.-.L., LAM C.I., YIM Y.W., CHAN J.Y.K. and Kwok K.W., Augmented Reality-Guided Visual Servoing for Flexible Endoscope Control, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems, 2019.
LUN T.L.T., WANG K., HO J.D.-.L., Lee K.H., Sze K.Y. and Kwok K.W., Real-time Surface Shape Sensing for Soft and Flexible Structures using Fiber Bragg Gratings, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1454 - 1461.


Researcher : HUANG Y-T
List of Research Outputs

Lee H., HUANG Y.-.T., HORN M. and Feng S.P.T., Engineered optical and electrical performance of rf-sputtered undoped nickel oxide thin films for inverted perovskite solar cells, Scientific Reports. 2018, 8.


Researcher : HUI TH
List of Research Outputs

FANG C., HUI T.H., WEI X., YAN Z., Qian J. and Lin Y., Interaction and fusion dynamics between cellular blebs, Journal of Biomechanics. 2018, 81: 113-121.
SHAO X., You R., HUI T.H., FANG C., GONG Z., YAN Z., Chang R.C.C., Shenoy V.B. and Lin Y., Tension- and Adhesion-Regulated Retraction of Injured Axons, Biophysical Journal. 2019, 117: 193-202.


Researcher : HUNG LT
List of Research Outputs

Chan Y.K., YAN W.H., HUNG L.T., CHAO Y., WU J. and Shum H.C., All Aqueous Thin-film-flow-induced Cell-based Monolayer, ACS Applied Materials & Interfaces. ACS Publications, 2019, 11: 22869-22877.


Researcher : He B
List of Research Outputs

He B., LIU L. and Huang M., Room-Temperature Quenching and Partitioning Steel, Metallurgical and Materials Transactions A. 2018, 49: 3167-3172.
He B. and Huang M., Strong and ductile medium Mn steel without transformation-induced plasticity effect, Materials Research Letters. 2018, 6: 365-371.


Researcher : Huang L
Project Title:The suppression of multiple tones for small axial-flow fans
Investigator(s):Huang L
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:12/2005


Project Title:Blower noise source identification and mitigation for notebook PCs
Investigator(s):Huang L
Department:Mechanical Engg
Source(s) of Funding:Intel Corporation - General Award
Start Date:05/2007


Project Title:Electromagnetic Absorption of Sound
Investigator(s):Huang L
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:Development of an Environmentally Friendly Sound Absorption Panel for Broadband Noise Reduction Purpose
Investigator(s):Huang L
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:12/2011


List of Research Outputs

Huang L., Acoustic impedance and the control of sound waves, Fluid-Structure-Sound Interactions and Control. 2019, 315-324.
Jiang C., Wang C. and Huang L., Acoustic characterization of ducts lined with poroelastic materials based on wave finite element method, Applied Acoustics. Elsevier, 2019, 145: 362-373.
Xu S.Y., Jiang C. and Huang L., Public health impacts from subway noise: Case study Hong, 177th Meeting of the Acoustical Society of America, 13-17 May 2019, Louisville, Kentucky, USA. Journal of the Acoustical Society of America, 2019, 145(3),Part 2: 1867.
Zhou Y., Kimura M., Peng G.Y., Lucey A.D. and Huang L., In: Yu Zhou, Motoaki Kimura, Guoyi Peng, A. D. Lucey, Lixi Huang, Fluid-Structure-Sound Interactions and Control. Singapore, Springer Nature Singapore Pte Ltd, 2019, 1.


Researcher : Huang M
Project Title:Ultrahigh strength Twinning Induced Plasticity (TWIP) steels strengthened by ultrafine-grained structure and intermetallic nanoprecipitates
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:Managing twin behaviour in small-sized crystals
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Early Career Scheme (ECS)
Start Date:01/2013


Project Title:Strong and Ductile Nanotwinned Alloys
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2014


Project Title:Nanotwinned Steels for Structural Applications
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Platform Research Projects
Start Date:03/2014


Project Title:Nanotwinned Steels for Structural Applications
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:08/2014


Project Title:Nanotwinned Steels for Structural Applications
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:10/2014


Project Title:Martensitic transformation in nano- and micron-sized fcc crystals
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2015


Project Title:Ultrastrong nanostructured steel with unexpected large tensile ductility
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:08/2016


Project Title:Hydrogen embrittlement of lightweight automotive steels
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:03/2017


Project Title:Development Of A New Nickel And Nitrogen Free Austenitic Stainless Steel And Its Related Powder Injection Moulding Method For Wearable Devices Applications
Investigator(s):Huang M, He B
Department:Mechanical Engg
Source(s) of Funding:Guangdong-Hong Kong Technology Cooperation Funding Scheme
Start Date:08/2017


Project Title:Development Of A New Nickel And Nitrogen Free Austenitic Stainless Steel And Its Related Powder Injection Moulding Method For Wearable Devices Applications
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:11/2017


Project Title:Development Of A New Nickel And Nitrogen Free Austenitic Stainless Steel And Its Related Powder Injection Moulding Method For Wearable Devices Applications
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:03/2018


Project Title:Combining a gradient structure with transformation- and twinning-induced plasticity effects to achieve high strength and high ductility in alloys
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2018


Project Title:Strong and ductile steels achieved by dislocation engineering
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:09/2018


Project Title:Development Of A New Nickel And Nitrogen Free Austenitic Stainless Steel And Its Related Powder Injection Moulding Method For Wearable Devices Applications
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Postdoctoral Hub Programme for ITF projects
Start Date:10/2018


Project Title:Development Of A New Nickel And Nitrogen Free Austenitic Stainless Steel And Its Related Powder Injection Moulding Method For Wearable Devices Applications
Investigator(s):Huang M, He B
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:10/2018


Project Title:2018 Research Output Prize (Faculty of Engineering)
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Research Output Prize (in Faculty)
Start Date:12/2018


Project Title:Outstanding Young Researcher Award 2017-18
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Outstanding Young Researcher Award
Start Date:12/2018


Project Title:Development Of A New Nickel And Nitrogen Free Austenitic Stainless Steel And Its Related Powder Injection Moulding Method For Wearable Devices Applications
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Postdoctoral Hub Programme for ITF projects
Start Date:01/2019


Project Title:4th International Conference on Medium and High Manganese Steel; Deformation twins are not important for the work hardening of TWIP steels
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:03/2019
Completion Date:04/2019


Project Title:Novel Strong and Ductile Mg alloys
Investigator(s):Huang M
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2019


List of Research Outputs

He B., LIU L. and Huang M., Room-Temperature Quenching and Partitioning Steel, Metallurgical and Materials Transactions A. 2018, 49: 3167-3172.
He B. and Huang M., Strong and ductile medium Mn steel without transformation-induced plasticity effect, Materials Research Letters. 2018, 6: 365-371.
Huang M., Deformation twins are not important for twinning-induced plasticity steel, 11th International Workshop on Materials Behavior at the Micro- and Nano- Scale, Xi’an, China, 2018. 2018.
Huang M., Member of Editorial Board, Materials Research Letters. Talor&Francis, 2018.
Huang M., Ultrahigh-strength and ductile deformed and partitioned (D&P) steel, International Workshop on grain boundaries and dislocations towards high performance metals and alloys, Beijing, China, 2018. 2018.
LI Y. and Huang M., Revealing the interfacial plasticity and shear strength of a TiB2-strengthened high-modulus low-density steel, Journal of the Mechanics and Physics of Solids. 2018, 121: 313-327.
LUO Z. and Huang M., Effect of Aluminum and Grain Size on the Fracture Behavior of Twinning-Induced Plasticity Steels, Metallurgical and Materials Transactions B. 2018.
LUO Z. and Huang M., Revealing the Fracture Mechanism of Twinning-Induced Plasticity Steels, steel research international. 2018, 89: 1700433.
Zhang M., Gourgues-Lorenzon A., Busso E., Luo H. and Huang M., Recrystallisation-assisted creep of an austenitic Fe-Ni alloy under low stresses after hot deformation, Acta Materialia. 2018, 153: 23-34.


Researcher : Huang YT
List of Research Outputs

CHEN J., Liu C., Huang Y.T., Lee H. and Feng S.P.T., Study of the growth mechanisms of nanoporous Ag flowers for non-enzymatic glucose detection, Nanotechnology. 2018, 29: 505501.
CHENG R., Chung C., Zhang H., ZHOU Z., Zhai P., Huang Y.T., Lee H. and Feng S.P.T., An Air Knife-Assisted Recrystallization Method for Ambient-Process Planar Perovskite Solar Cells and Its Dim-Light Harvesting, Small. 2019, 15: 1804465.
Zhai P., CHENG R., REN L., Huang Y.T., Lee H. and Feng S.P.T., In Situ Interface Engineering of TiO 2 Nanocrystals for Fully Ambient-Processed Perovskite Solar Cells , Solar RRL. 2018, 1800103.


Researcher : Hui KM
List of Research Outputs

HO J.D.-.L., LEE K.H., Tang W.L., Hui K.M., Althoefer K., Lam J. and Kwok K.W., Localised Online Learning-Based Control of a Soft Redundant Manipulator Under Variable Loading, Advanced Robotics. 2018, 32(21): 1-16.


Researcher : Hui THK
List of Research Outputs

Hui T.H.K., Cho W.C., Fong H.W., Yu M., Kwan K.W., Ngan K.C., Wong K.H., Tan Y., Yao S., Jiang H., Gu Z. and Lin Y., An electro-osmotic microfluidic system to characterize cancer cell migration under confinement, Journal of The Royal Society Interface. 2019, 16: 20190062.


Researcher : JI X
List of Research Outputs

JI X., Organic Transistors-based Devices for Biological Applications, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-148.
ZHOU Z., Zhang Z., Wu Q.S., Ji X., Wang J.L., Zeng X.C., Feng S.P.T. and Chan K.L., Inch-Scale Grain Boundary Free Organic Crystals Developed by Nucleation Seed-Controlled Shearing Method, ACS Applied Materials & Interfaces. 2018, 10: 35395-35403.


Researcher : Ji X
List of Research Outputs

JI X., Organic Transistors-based Devices for Biological Applications, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-148.
ZHOU Z., Zhang Z., Wu Q.S., Ji X., Wang J.L., Zeng X.C., Feng S.P.T. and Chan K.L., Inch-Scale Grain Boundary Free Organic Crystals Developed by Nucleation Seed-Controlled Shearing Method, ACS Applied Materials & Interfaces. 2018, 10: 35395-35403.


Researcher : Jiang C
List of Research Outputs

Jiang C., Wang C. and Huang L., Acoustic characterization of ducts lined with poroelastic materials based on wave finite element method, Applied Acoustics. Elsevier, 2019, 145: 362-373.
Xu S.Y., Jiang C. and Huang L., Public health impacts from subway noise: Case study Hong, 177th Meeting of the Acoustical Society of America, 13-17 May 2019, Louisville, Kentucky, USA. Journal of the Acoustical Society of America, 2019, 145(3),Part 2: 1867.


Researcher : KANG Z
List of Research Outputs

HAN X., Kang Z., Tian X. and Wang L., Experimental observations on the interface front of phase change material inside cylindrical cavity, Energy Storage. 2019, 1: e36.
LEI L., Kong T., Zhu P., KANG Z., Tian X. and Wang L., Self-Assembly of TiO 2 Nanofiber-Based Microcapsules by Spontaneously Evolved Multiple Emulsions , Langmuir. 2018, 34: 8785-8791.


Researcher : KWOK YH
List of Research Outputs

KWOK Y.H., Wang Y., WU M., LI F., ZHANG Y., Zhang H. and Leung Y.C.D., A dual fuel microfluidic fuel cell utilizing solar energy and methanol, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 409: 58-65.
PAN W., Wang Y., KWOK Y.H. and Leung Y.C.D., A low-cost portable cotton-based aluminum-air battery with high specific energy, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 179-185.
Wang Y., KWOK Y.H., ZHANG Y., PAN W. and Leung Y.C.D., Flexible hydrogen fuel cell fabricated on paper with embedded aluminium foil, Proceeding of the International Symposium on Hydrogen Energy & Energy Technologies (HEET2018). Japan, 2019, E3S Web of Conference 83,01004 (2019): pp.8.
Wang Y., KWOK Y.H., PAN W., Zhang H.M. and Leung Y.C.D., Innovative paper-based Al-air batteries as a low-cost and green energy technology for the miniwatt market, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 414: 278-282.
Wang Y., PAN W., KWOK Y.H., Lu X. and Leung Y.C.D., Low-cost Al-air batteries with paper-based solid electrolyte, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 522-527.
Zhang H.M., Wang Y., KWOK Y.H., Wu Z.C., Xia D.H. and Leung Y.C.D., A Direct Ammonia Microfluidic Fuel Cell using NiCu Nanoparticles Supported on Carbon Nanotubes as an Electrocatalyst, ChemSusChem. Weinheim, Germany, Wiley-VCH Verlag GmbH & Co., 2018, 11: 2889-2897.


Researcher : Khan A
List of Research Outputs

Cai J., Zhang M., Sun Z., Zhang C., Liang C., Khan A., Ning X.H., Ge H.X., Feng S.P.T. and Li W., Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics, Journal of Materials Chemistry C. 2019, 7(15): 4363-4373.
Cai J., Zhang C., Khan A., Wang L. and Li W., Selective Electroless Metallization of Micro-and Nanopatterns via Poly (dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications, ACS Applied Materials & Interfaces. 2018.
Zhang C., Cai J., Liang C., Khan A. and Li W., Scalable Fabrication of Metallic Nanofiber Network via Templated Electrodeposition for Flexible Electronics, Advanced Functional Materials. 2019, 1903123.


Researcher : Kim J
Project Title:Nano-precision 3D printing of functional materials
Investigator(s):Kim J
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research for New Staff
Start Date:11/2016
Completion Date:11/2018


Project Title:High throughput and nanoscale meniscus-guided 3D printing
Investigator(s):Kim J
Department:Mechanical Engg
Source(s) of Funding:Early Career Scheme (ECS)
Start Date:01/2018


Project Title:2018 MRS Fall Meeting; X-Ray Driven Microswimmers
Investigator(s):Kim J
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:11/2018
Completion Date:11/2018


Project Title:3D Printed Thermometers That Swim
Investigator(s):Kim J
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


Project Title:Ultralong, Suspended Perovskite Nanowires for Thermoelectric Devices
Investigator(s):Kim J, Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Environment and Conservation Fund
Start Date:06/2019


List of Research Outputs

Kim J., A Femtoliter Meniscus Enables Nanoscale 3D Printing, The 1st Symposium for Next-Generation Convergence Materials 2018. 2018.
Kim J., A nanopipette enables manipulation of nano-matters in fluids, 2019 KPS Spring Meeting. 2019.
Kim J., A nanopipette enables manipulation of nano-matters in fluids, Departmental Seminar: MSE at SUSTECH. 2019.
Kim J., Engineered Brownian motion of nanomaterials: Toward biomedicine, Invited Seminar of New Biology, DGIST. 2018.
Kim J., Engineered Brownian motion of nanomaterials, Departmental Seminar: CUHK. 2019.
Kim J., Engineered Brownian motion of nanomaterials, MSE Seminar, KAIST. 2018.
Kim J., Meniscus-on-demand Parallel 3D Nanoprinting, NGL, Next Generation Lithography Conference 2018. 2018.
Kim J., Nanoscale 3D Printing for Nano/Biomaterials, Med3DP: The First Hong Kong International Interdisciplinary Clinical 3D Printing Forum 2018. 2018.
Kim J., Pyo J., Seol S.K. and Je J.H., Precise Placement of Microbubble Templates at Single Entity Resolution, ACS Macro Letters. 2018, 7: 1267-1271.
Kim J., X-rays can propel and visualize colloids, SpectroNanoscopy 2018 Workshop. 2018.
LI J., Kong T., Yu J., Lee K.H., Tang Y.H., Kwok K.W., Kim J. and Shum H.C., Electrocoiling-guided Printing of Multiscale Architectures at Single-wavelength Resolution, Lab on a Chip. Royal Society of Chemistry, 2019, 19(11): 1953-1960.
Lee S., Wajahat M., Kim J., Pyo J., Chang W.S., Cho S.H., Kim J. and Seol S.K., Electroless Deposition-Assisted 3D Printing of Micro Circuitries for Structural Electronics, ACS Applied Materials & Interfaces. 2019, 11: 7123-7130.
XU Z. and Kim J., X-ray Driven Microswimmers, Materials Research Society (MRS) Fall 2018.
XU Z., CHEN M., Lee H., Feng S.P.T., Park J.Y., Lee S. and Kim J., X-ray-Powered Micromotors, ACS Applied Materials & Interfaces. 2019, 11: 15727-15732.


Researcher : Ko WLM
List of Research Outputs

Kharmyssov C., Ko W.L.M. and Kim J.R., Automated segmentation of optical coherence tomography images, Chinese Optics Letters. 2019, 17(1).
Ko W.L.M., Translational Ocular Biomechanics in Glaucoma, Research Seminar, Nazarbayev University, Astana, Kazakhstan. 2018.


Researcher : Kong T
List of Research Outputs

LEI L., Kong T., Zhu P., KANG Z., Tian X. and Wang L., Self-Assembly of TiO 2 Nanofiber-Based Microcapsules by Spontaneously Evolved Multiple Emulsions , Langmuir. 2018, 34: 8785-8791.
Zhu P., Kong T., TIAN Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. 2018, 5: 1156-1165.
Zhu P., Kong T., Tian Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. The Royal Society of Chemistry, 2018, 5: 1156-1165.


Researcher : Kou X
Project Title:Doris Zimmern HKU-Cambridge Hughes Hall Fellowships 2010-11
Investigator(s):Kou X
Department:Mechanical Engg
Source(s) of Funding:Doris Zimmern HKU-Cambridge Hughes Hall Fellowships
Start Date:09/2010




Researcher : Kwan KW
List of Research Outputs

Hui T.H.K., Cho W.C., Fong H.W., Yu M., Kwan K.W., Ngan K.C., Wong K.H., Tan Y., Yao S., Jiang H., Gu Z. and Lin Y., An electro-osmotic microfluidic system to characterize cancer cell migration under confinement, Journal of The Royal Society Interface. 2019, 16: 20190062.
Kwan K.W., Xie D., Zhang R., Shan Z. and Ngan A.H.W., Electron-Beam Induced Water Removal, Phase Change, and Crystallization of Anodic-Electrodeposited Turbostratic Nickel Hydroxide-Oxyhydroxide, Physica Status Solidi (a). Weinheim, WILEY-VCH Verlag GmbH & Co., 2018, 1800623.
Ngan A.H.W., WANG P. and Kwan K.W., Patterned printing of ceramics by electrodeposition, and applications in micro-robotics, Invited talk, Electrochemical Society 2018 Fall Meeting, Sept. 30 – Oct. 4, 2018, Cancun, Mexico.. 2018.


Researcher : Kwok KW
Project Title:Interventional Imaging and Robotic Systems
Investigator(s):Kwok KW
Department:Mechanical Engg
Source(s) of Funding:Start-up Allowance for Returning Croucher Award Recipients
Start Date:08/2014


Project Title:Advanced Human-Robot Cooperative Control Interfaces for Tele-operated Anthropomorphic Manipulation Systems
Investigator(s):Kwok KW, Lam J
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research for New Staff
Start Date:01/2015


Project Title:MRI-guided and Robot-assisted Catheterization for Cardiac Electrophysiological Intervention
Investigator(s):Kwok KW
Department:Mechanical Engg
Source(s) of Funding:Early Career Scheme (ECS)
Start Date:01/2016


Project Title:Development of Soft Robotic Colonoscope for Non-invasive Diagnostic and Therapeutic Colonoscopy
Investigator(s):Kwok KW, Law WL, Lam J, Sze KY, Cheung CL, Chow CKM, Leong CWM
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Support Programme (Tier 2)
Start Date:05/2016


Project Title:King's/HKU Fellowship Awards 2016-17
Investigator(s):Kwok KW
Department:Mechanical Engg
Source(s) of Funding:King's/HKU Fellowship Awards
Start Date:06/2016


Project Title:Development of Soft Robotic Colonoscope for Non-invasive Diagnostic and Therapeutic Colonoscopy
Investigator(s):Kwok KW, Law WL, Lam J, Sze KY, Cheung CL
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:07/2016


Project Title:Development of Soft Robotic Colonoscope for Non-invasive Diagnostic and Therapeutic Colonoscopy
Investigator(s):Kwok KW, Law WL, Lam J, Sze KY, Cheung CL
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:08/2016


Project Title:High-performance MRI-guided Robotic System for Functional and Stereotactic Neurosurgery
Investigator(s):Kwok KW, Roberts RC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2017


Project Title:MRI-guided Soft Continuum Robotic System for Transoral Laser Microsurgery
Investigator(s):Kwok KW, Tsoi KH, Wong KKY
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2018


Project Title:Image-guided Automatic Robotic Surgery
Investigator(s):Kwok KW
Department:Mechanical Engg
Source(s) of Funding:Theme-based Research Scheme
Start Date:12/2018


Project Title:Intra-operative MRI-guided Robotic System for Photothermal Therapy of Bladder Cancer
Investigator(s):Kwok KW, Wong KKY, Vardhanabhuti V
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


Project Title:Enhanced Magnetic Resonance Imaging Guidance for Robotic Transoral Surgery
Investigator(s):Kwok KW, Tsoi KH, Cheng YY, Vardhanabhuti V, Chang HCC
Department:Mechanical Engg
Source(s) of Funding:Matching Grant for Joint Research
Start Date:02/2019


Project Title:High-performance Integrated Robotic Systems for Intra-operative MRI-guided Interventions
Investigator(s):Kwok KW, Vardhanabhuti V, Chang HCC
Department:Mechanical Engg
Source(s) of Funding:Platform Technology Funding
Start Date:04/2019


Project Title:The 2019 International Conference on Robotics and Automation (ICRA) https://www.icra2019.org/; Invited talk in ICRA workshop - Soft Haptic Interaction: Modeling, Design and Application/Talk title: Computational Mechanics of Soft Robots - from Design, Control to Sensing
Investigator(s):Kwok KW
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:05/2019


Project Title:Enhanced Magnetic Resonance Imaging Guidance for Robotic Transoral Surgery
Investigator(s):Kwok KW, Tsoi KH, Cheng YY, Vardhanabhuti V, Chang HCC
Department:Mechanical Engg
Source(s) of Funding:Postdoctoral Hub Programme for ITF projects
Start Date:06/2019


List of Research Outputs

Chen Y., Lam J., Cui Y., Shen J. and Kwok K.W., Reachable Set Estimation and Synthesis for Periodic Positive Systems, IEEE Transactions on Cybernetics. IEEE, 2019, 1 - 22.
Chen Y., Lam J., Cui Y. and Kwok K.W., Switched Systems Approach to State Bounding for Time Delay Systems, Information Sciences. Elsevier, 2018, 465: 191-201.
DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., Tao Y., Lee A.P.W. and Kwok K.W., Best Poster Paper Award (2nd place), 2019 IEEE International Conference on Robotics and Automation (ICRA’19) workshop on Surgical Robots, sponsored by Intuitive Surgical Inc.. 2019.
DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., TAO Y., LEE A.P.W. and Kwok K.W., Experimental Validation of Autonomous Motion Control with Standard Cardiac Electrophysiology Catheter, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems. 2019.
DONG Z., GUO Z., Lee K.H., FANG G., Tang W.L., Chang H.C.C., Chan D.T.M. and Kwok K.W., High-performance Continuous Hydraulic Motor for MR Safe Robotic Teleoperation, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1964-1971.
DONG Z., Kwok K.W., GUO Z. and Lee K.H., PCT Patent: Fluid Powered Master-Slave Actuation for MRI-Guided Interventions, PCT/IB2019/051877 , 2019.
FAN Y., YANG F., CHEUNG G.S.H., CHAN A.K.Y., WANG D.D., LAM Y.Y., CHOW C.K., LEONG C.W.M., KAM K.K.H., SO K.C.Y., TSE G., QIAO Z., HE B., Kwok K.W. and LEE A.P.W., Device Sizing Guided By Echocardiography-based Three-dimensional Printing Is associated With Superior Outcome After Percutaneous Left Atrial Appendage Occlusion , Journal of the American Society of Echocardiography. 2019, 32(6): 708-719.
FANG G., WANG X., WANG K., Lee K.H., HO J.D.-.L., FU H.C., Fu K.C.D. and Kwok K.W., Vision-based Online Learning Control for Soft Robots using Local Gaussian Process Regression, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1194-1201.
GUO Z., Kwok K.W., DONG Z., Lee K.H., FU H.C. and CHEUNG C.L., PCT Patent: Robotic Stereotactic System for MRI-Guided Neurosurgery, PCT/CN2019/072961 , 2019.
GUO Z., LEONG C.W.M., Su H., Kwok K.W., Chan D.T.M. and Poon W.S., Techniques for Stereotactic Neurosurgery: Beyond the Frame, Towards the Intraoperative Magnetic Resonance Imaging-guided and Robot-assisted Approaches, World Neurosurgery. 2018, 116: 77-87.
HO J.D.-.L., LEE K.H., Tang W.L., Hui K.M., Althoefer K., Lam J. and Kwok K.W., Localised Online Learning-Based Control of a Soft Redundant Manipulator Under Variable Loading, Advanced Robotics. 2018, 32(21): 1-16.
Kwok K.W., An Engineer's Perspective of 3D Printing for Medical Application, Invited Talk by Hong Kong 3D Printing Association for the First Hong Kong International Interdisciplinary Clinical 3D Printing Forum 2018. 2018.
Kwok K.W., Associate Editor, IEEE International Conference on Robotics and Automation. 2018.
Kwok K.W., Associate Editor, IEEE/RSJ International Conference on Intelligent Robotics and Systems (IROS) . IEEE, 2018.
Kwok K.W., LUN T.L.T., HO J.D.-.L., Lee K.H. and Wong K.K.Y., CN Patent: Real-time Surface Shape Sensing for Flexible Structures Using Fiber Bragg Gratings, CN 201910552110.1, 2019.
Kwok K.W., Computational Mechanics of Soft Robots – from Design, Control to Sensing, Invited talk for 2019 IEEE International Conference on Robotics and Automation (ICRA) workshop on Soft Haptic Interaction: Modeling, Design and Application. 2019.
Kwok K.W., DONG Z., HE Z., FU H.C., CHEUNG C.L., Wong H.W., Lee C.Y., Bozzolan A.F., Lau Y.H., Ng M.C., Lo T.F., Tseng W., Lo K.M., Yeung K.H., Cheung K.H., Yeung S.H., Tung W.L. and Chan W.H., First Runner-up Award, Robocon 2019 Hong Kong Contest “Great Urtuu”. 2019.
Kwok K.W., From Machine to Artificial Intelligence: Why it Matters in Healthcare Applications, Invited talk for Signate Life Sciences: Smart Robotics and Artificial Intelligence Workshop, Intercontinental Hotel, Hong Kong . 2018.
Kwok K.W., From Machine to Artificial Intelligence: Why it Matters in Healthcare Applications, Smart Robotics and Artificial Intelligence Workshop. 2018.
Kwok K.W., Guest Editor, "Focused Section on Surgical Robotics" for International Journal of Intelligent Robotics and Applications. 2019.
Kwok K.W., High-performance Robotic System for MRI-Guided Interventions, Invited Talk by Alibaba Technology Association (ATA) Workshop . 2018.
Kwok K.W., Intra-Operative MRI-Guided Robotics Systems, Invited Talk by Engineering Medical Innovation Summit: Medicine for the Future 2018. 2018.
Kwok K.W., Intraoperative MRI guided surgery, Invited Lecture for International Minimally Invasive Surgery Conference 2019, Old Wing, Hong Kong Convention and Exhibition Centre. 2019.
Kwok K.W., CHEUNG C.L., HO J.D.-.L., GUO Z., Chang H.C.C. and Vardhanabhuti V., PCT Patent: MRI Tracking Device Design, Fabrication, and Methods of use for MRI-Guided Robotic System, PCT/IB2019/051945 , 2019.
Kwok K.W., LUN T.L.T., HO J.D.-.L., Lee K.H. and Wong K.K.Y., US Patent: Real-time Surface Shape Sensing for Flexible Structures Using Fiber Bragg Gratings, US 16/449,063, 2019.
LI J., Kong T., Yu J., Lee K.H., Tang Y.H., Kwok K.W., Kim J. and Shum H.C., Electrocoiling-guided Printing of Multiscale Architectures at Single-wavelength Resolution, Lab on a Chip. Royal Society of Chemistry, 2019, 19(11): 1953-1960.
LI Z., FANG G., HO J.D.-.L., LAM C.I., YIM Y.W., CHAN J.Y.K. and Kwok K.W., Augmented Reality-Guided Visual Servoing for Flexible Endoscope Control, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems, 2019.
LUN T.L.T., WANG K., HO J.D.-.L., Lee K.H., Sze K.Y. and Kwok K.W., Real-time Surface Shape Sensing for Soft and Flexible Structures using Fiber Bragg Gratings, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1454 - 1461.
Li P., Lam J., Lu R. and Kwok K.W., Stability and L2 Synthesis of A Class of Periodic Piecewise Time-varying Systems, IEEE Transactions on Automatic Control. IEEE, 2018, 64(8): 3378-3384.
Liu M., Lam J., ZHU B. and Kwok K.W., On Positive Realness, Negative Imaginariness, and H∞ Control of State-space Symmetric Systems, Automatica. England, Pergamon-elsevier Science Ltd, 2019, 101: 190-196.
Tang S.C., LUN T.L.T., GUO Z., Kwok K.W. and McDannold N.J., First Place Prize Paper Award , 2017 IEEE Transactions on Power Electronics. 2018.
Tang Z., Fan Y.T., Jin C.N., Kwok K.W. and Lee A.P.W., Mitral Annular and Left Ventricular Dynamics in Atrial Functional Mitral Regurgitation: A Three-Dimensional and Speckle Tracking Echocardiographic Study, Journal of the American Society of Echocardiography. 2019, 32(4): 503-513.
Taylor A.J., Montayre R., Zhao Z., Kwok K.W. and Tse Z.T.H., Modular Force Approximating Soft Robotic Pneumatic Actuator, International Journal of Computer Assisted Radiology and Surgery. Springer International Publishing, 2018, 13(11): 1819-1827.
Yin M..., Chen Y., LEE K.H., Fu K.C.D., Tse Z.T.H. and Kwok K.W., Dynamic Modeling and Characterization of the Core-XY Cartesian Motion System, 2018 IEEE International Conference on Real-time Computing and Robotics. IEEE, 2018, 206-211.


Researcher : LEE KH
List of Research Outputs

HO J.D.-.L., LEE K.H., Tang W.L., Hui K.M., Althoefer K., Lam J. and Kwok K.W., Localised Online Learning-Based Control of a Soft Redundant Manipulator Under Variable Loading, Advanced Robotics. 2018, 32(21): 1-16.
LEE K.H., Continuum Robotic Systems for Intra-operative MRI-guided Interventions, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-217.
Yin M..., Chen Y., LEE K.H., Fu K.C.D., Tse Z.T.H. and Kwok K.W., Dynamic Modeling and Characterization of the Core-XY Cartesian Motion System, 2018 IEEE International Conference on Real-time Computing and Robotics. IEEE, 2018, 206-211.


Researcher : LEI H
List of Research Outputs

LEI H., Tang J.W. and Li Y., Transmission routes of influenza A(H1N1)pdm09: analyses of inflight outbreaks, Epidemiology and Infection. 2018, 146: 1731-1739.
XIAO S., Tang J.W., Hui D.S., Lei H., Yu H. and Li Y., Probable transmission routes of the influenza virus in a nosocomial outbreak, Epidemiology and Infection. 2018, 146: 1114-1122.


Researcher : LEI L
List of Research Outputs

LEI L., Kong T., Zhu P., KANG Z., Tian X. and Wang L., Self-Assembly of TiO 2 Nanofiber-Based Microcapsules by Spontaneously Evolved Multiple Emulsions , Langmuir. 2018, 34: 8785-8791.
LEI L., Microfluidic Fabrication of Colloidal/Polymer-stabilized Emulsions and Colloidosomes, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-174.


Researcher : LEONG CWM
List of Research Outputs

FAN Y., YANG F., CHEUNG G.S.H., CHAN A.K.Y., WANG D.D., LAM Y.Y., CHOW C.K., LEONG C.W.M., KAM K.K.H., SO K.C.Y., TSE G., QIAO Z., HE B., Kwok K.W. and LEE A.P.W., Device Sizing Guided By Echocardiography-based Three-dimensional Printing Is associated With Superior Outcome After Percutaneous Left Atrial Appendage Occlusion , Journal of the American Society of Echocardiography. 2019, 32(6): 708-719.
Fan Y., Yang F., Cheung G.S.H., Chan A.K.Y., Wang D.D., Lam Y.Y., CHOW C.K., LEONG C.W.M., Kam K.K.H. and So K.C.Y., Device Sizing Guided by Echocardiography-Based Three-Dimensional Printing Is Associated with Superior Outcome after Percutaneous Left Atrial Appendage Occlusion, Journal of the American Socity of Echocardiography. 2019, 32(6): 708-719.
Fan Y., Yang F., Cheung G.S.H., Chan A.K.Y., Wang D.D., Lam Y.Y., CHOW C.K., LEONG C.W.M., Kam K.K.H., So K.C.Y., Tse G., Qiao Z., He B. and APW L.E.E., Device Sizing Guided by Echocardiography-Based Three-Dimensional Printing is Associated with Superior Outcome after Percutaneous Left Atrial Appendage Occlusion, Journal of the American Society of Echocardiography. 2019, 32(6): 708-719.
GUO Z., LEONG C.W.M., Su H., Kwok K.W., Chan D.T.M. and Poon W.S., Techniques for Stereotactic Neurosurgery: Beyond the Frame, Towards the Intraoperative Magnetic Resonance Imaging-guided and Robot-assisted Approaches, World Neurosurgery. 2018, 116: 77-87.
LEONG C.W.M., Performance-aware Programming for Intraoperative Intensity-based Image Registration on Graphics Processing Units, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-126.


Researcher : LI F
List of Research Outputs

KWOK Y.H., Wang Y., WU M., LI F., ZHANG Y., Zhang H. and Leung Y.C.D., A dual fuel microfluidic fuel cell utilizing solar energy and methanol, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 409: 58-65.
LI F. and Leung Y.C.D., Investigation of palladium nanoparticles loaded onto TiO2 nanorod/FTO for enhancement of photoelectro-chemical performance, Proceeding of the 3rd International Conference on Catalysis and Chemical Engineering. USA, USG United Scientific Group, 2019, 4 pages.
LI F., Huang H.B., Li G.S. and Leung Y.C.D., TiO2 nanotube arrays modified with nanoparticles of platinum group metals (Pt, Pd, Ru): enhancement on photoelectrochemical performance, Journal of Nanoparticle Research. Netherlands, Springer, 2019, 21.
WU M., Leung Y.C.D., ZHANG Y., Huang H.B., Xie R., Szeto W. and LI F., Toluene degradation over Mn-TiO2/CeO2 composite catalyst under vacuum ultraviolet (VUV) irradiation, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 195: 985-994.


Researcher : LI H
List of Research Outputs

LI H. and Wang M., Fabrication and evaluation of multilayered tissue engineering scaffolds incorporated with mesenchymal stem cells, International Conference on Materials for Advanced Technologies 2019 (ICMAT 2019). Singapore, 2019, 1 pp.
LI H., SUN H. and Wang M., Nanofibrous scaffolds with both MSC-laden cell fibers and growth factor-loaded fibers for tissue regeneration, Materials Research Society Fall Meeting. Boston, USA, 2018, 1 pp.


Researcher : LI J
List of Research Outputs

CHEN X., YI J., Li J., ZHOU J. and Wang Z., Soft-Actuator-Based Robotic Joint for Safe and Forceful Interaction With Controllable Impact Response, IEEE Robotics and Automation Letters. 2018, 3: 3505-3512.
LI J., SHEN Z., Xu W.Y.T., Lam Y.H.W., Hsung R.T.C., Pow E.H.N., Kosuge K. and Wang Z., A Compact Dental Robotic System Using Soft Bracing Technique, IEEE Robotics and Automation Letters. 2019, 4: 1271 - 1278.
LI J., SUN H. and Wang M., A novel facile method for bijels fabrication, 2019 Spring Meeting of the European Materials Research Society (E-MRS). Nice, France, 2019, 1 pp.
LI J., SUN H. and Wang M., Bijels-derived hybrid hydrogel membranes as delivery vehicles for the controlled release of bio-agents, HKU-Osaka University Joint Symposium on Materials Research. Osaka, Japan, 2018, 1 pp.
LI J., Kong T., Yu J., Lee K.H., Tang Y.H., Kwok K.W., Kim J. and Shum H.C., Electrocoiling-guided Printing of Multiscale Architectures at Single-wavelength Resolution, Lab on a Chip. Royal Society of Chemistry, 2019, 19(11): 1953-1960.
LI J., SUN H., Haase M.F. and Wang M., Fabrication and characteristics of bijels-derived hybrid hydrogel membranes for anticancer drug delivery, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
LI J., Zhang Y., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., Robotic System for Automatic Dental Restorations in Oral Cavity, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
Li J., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., A Customizable, Compact Robotic Manipulator for Assisting Multiple Dental Procedures, IEEE International Conference on Advanced Robotics and Mechatronics (ICARM2018). 2018, 1-6.
Zhang T.Y., Xu W.Y.T., Tao Y.F., Tsang H.Y., LI J. and Wang Z., Hong Kong X Best FYP Award 2019, Hong Kong X Tech. 2019.
Zhang T.Y., Xu W.Y.T., Tao Y.F., Tsang H.Y., LI J. and Wang Z., IMechE Best Student Project of the Year 2018: Dental Robotic Manipulator, Institute of Mechanical Engineers HK (IMechE). 2019.


Researcher : LI J
List of Research Outputs

CHEN X., YI J., Li J., ZHOU J. and Wang Z., Soft-Actuator-Based Robotic Joint for Safe and Forceful Interaction With Controllable Impact Response, IEEE Robotics and Automation Letters. 2018, 3: 3505-3512.
LI J., SHEN Z., Xu W.Y.T., Lam Y.H.W., Hsung R.T.C., Pow E.H.N., Kosuge K. and Wang Z., A Compact Dental Robotic System Using Soft Bracing Technique, IEEE Robotics and Automation Letters. 2019, 4: 1271 - 1278.
LI J., SUN H. and Wang M., A novel facile method for bijels fabrication, 2019 Spring Meeting of the European Materials Research Society (E-MRS). Nice, France, 2019, 1 pp.
LI J., SUN H. and Wang M., Bijels-derived hybrid hydrogel membranes as delivery vehicles for the controlled release of bio-agents, HKU-Osaka University Joint Symposium on Materials Research. Osaka, Japan, 2018, 1 pp.
LI J., Kong T., Yu J., Lee K.H., Tang Y.H., Kwok K.W., Kim J. and Shum H.C., Electrocoiling-guided Printing of Multiscale Architectures at Single-wavelength Resolution, Lab on a Chip. Royal Society of Chemistry, 2019, 19(11): 1953-1960.
LI J., SUN H., Haase M.F. and Wang M., Fabrication and characteristics of bijels-derived hybrid hydrogel membranes for anticancer drug delivery, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
LI J., Zhang Y., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., Robotic System for Automatic Dental Restorations in Oral Cavity, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
Li J., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., A Customizable, Compact Robotic Manipulator for Assisting Multiple Dental Procedures, IEEE International Conference on Advanced Robotics and Mechatronics (ICARM2018). 2018, 1-6.
Zhang T.Y., Xu W.Y.T., Tao Y.F., Tsang H.Y., LI J. and Wang Z., Hong Kong X Best FYP Award 2019, Hong Kong X Tech. 2019.
Zhang T.Y., Xu W.Y.T., Tao Y.F., Tsang H.Y., LI J. and Wang Z., IMechE Best Student Project of the Year 2018: Dental Robotic Manipulator, Institute of Mechanical Engineers HK (IMechE). 2019.


Researcher : LI J
List of Research Outputs

CHEN X., YI J., Li J., ZHOU J. and Wang Z., Soft-Actuator-Based Robotic Joint for Safe and Forceful Interaction With Controllable Impact Response, IEEE Robotics and Automation Letters. 2018, 3: 3505-3512.
LI J., SHEN Z., Xu W.Y.T., Lam Y.H.W., Hsung R.T.C., Pow E.H.N., Kosuge K. and Wang Z., A Compact Dental Robotic System Using Soft Bracing Technique, IEEE Robotics and Automation Letters. 2019, 4: 1271 - 1278.
LI J., SUN H. and Wang M., A novel facile method for bijels fabrication, 2019 Spring Meeting of the European Materials Research Society (E-MRS). Nice, France, 2019, 1 pp.
LI J., SUN H. and Wang M., Bijels-derived hybrid hydrogel membranes as delivery vehicles for the controlled release of bio-agents, HKU-Osaka University Joint Symposium on Materials Research. Osaka, Japan, 2018, 1 pp.
LI J., Kong T., Yu J., Lee K.H., Tang Y.H., Kwok K.W., Kim J. and Shum H.C., Electrocoiling-guided Printing of Multiscale Architectures at Single-wavelength Resolution, Lab on a Chip. Royal Society of Chemistry, 2019, 19(11): 1953-1960.
LI J., SUN H., Haase M.F. and Wang M., Fabrication and characteristics of bijels-derived hybrid hydrogel membranes for anticancer drug delivery, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
LI J., Zhang Y., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., Robotic System for Automatic Dental Restorations in Oral Cavity, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
Li J., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., A Customizable, Compact Robotic Manipulator for Assisting Multiple Dental Procedures, IEEE International Conference on Advanced Robotics and Mechatronics (ICARM2018). 2018, 1-6.
Zhang T.Y., Xu W.Y.T., Tao Y.F., Tsang H.Y., LI J. and Wang Z., Hong Kong X Best FYP Award 2019, Hong Kong X Tech. 2019.
Zhang T.Y., Xu W.Y.T., Tao Y.F., Tsang H.Y., LI J. and Wang Z., IMechE Best Student Project of the Year 2018: Dental Robotic Manipulator, Institute of Mechanical Engineers HK (IMechE). 2019.


Researcher : LI S
List of Research Outputs

LI S., Ma J., Pei Y. and Chen Y., Anharmonic lattice dynamics of Te and its counter-intuitive strain dependent lattice thermal conductivity, J. Mater. Chem. C. 2019, 7: 5970.
Williamson I., Lawson M., LI S., Chen Y. and Li L., Metal-Site Dopants in Two-Dimensional Transition Metal Dichalcogenides, 2019 IEEE Workshop on Microelectronics and Electron Devices (WMED). 2019.


Researcher : LI W
List of Research Outputs

Cai J., Zhang M., Sun Z., Zhang C., Liang C., Khan A., Ning X.H., Ge H.X., Feng S.P.T. and Li W., Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics, Journal of Materials Chemistry C. 2019, 7(15): 4363-4373.
Cai J., Zhang C., Khan A., Wang L. and Li W., Selective Electroless Metallization of Micro-and Nanopatterns via Poly (dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications, ACS Applied Materials & Interfaces. 2018.
Fu X., Cai J., Zhang X., Li W., Ge H. and Hu Y., Top-down fabrication of shape-controlled, monodisperse nanoparticles for biomedical applications, Advanced drug delivery reviews. 2018.
Li W., Cost-effective and Scalable Manufacturing of Metal-mesh Transparent Electrodes for Flexible Applications , Chinese Materials Conference. 2018.
Li W., Interference Lithography and Nanoimprint Lithography for Nanooptic Devices over Wafer-scale Area, IEEE-NEMS, The 14th International Conference on Nano/Micro Engineered and Molecular Systems. 2019.
Liu C.H., Cheng W.C., LI W., MO Z., WU Z., Chan Y.L., Kwan W.K. and Yau H.T., Computational Fluid Dynamics Study of Wind Environment in Urban Areas, PRAGMA35; 3 to 6 October 2018; Penang, Malaysia. 2018.
SUN C., Cai J., Zhao K. and Li W., Best Invited Poster Award, The 63rd International Conference On Electron, Ion, and Photon Beam Technology and Nanofabrication. 2019.
Wu R., Ding Y., Yu K.M., Zhou K., ZHU Z., Ou X., Zhang Q., Zhuang M., Li W., Xu Z., Altman M.S. and Luo Z., Edge-Epitaxial Growth of Graphene on Cu with a Hydrogen-Free Approach, Chemistry of Materials. 2019, 31: 2555-2562.
Zhang C., Cai J., Liang C., Khan A. and Li W., Scalable Fabrication of Metallic Nanofiber Network via Templated Electrodeposition for Flexible Electronics, Advanced Functional Materials. 2019, 1903123.
Zhang L., Guo L., Shan X., Lin X., Gu T., Zhang J., Ge J., Li W., Ge H., Jiang Q. and Ning X., An elegant nitroreductase responsive fluorescent probe for selective detection of pathogenic Listeria in vitro and in vivo, Talanta. 2019, 198: 472-479.


Researcher : LI Y
List of Research Outputs

Bard R.L., Ijaz M.K., Zhang J., Li Y., Bai C., Yang Y., Carcia W.D., Creek J. and Brook R.D., Interventions to Reduce Personal Exposures to Air Pollution, Global Heart. 2019, 14: 47-60.
Ching J., Aliaga D., Mills G., Masson V., See L., Neophytou M., Middel A., Baklanov A., Ren C., Ng E., Fung J., Wong M., Huang Y., Martilli A., Brousse O., Stewart I., Zhang X., Shehata A., Miao S., Wang X., Wang W., Yamagata Y., Duarte D., Li Y., Feddema J., Bechtel B., Hidalgo J., Roustan Y., Kim Y., Simon H., Kropp T., Bruse M., Lindberg F., Grimmond S., Demuzure M., Chen F., Li C., Gonzales-Cruz J., Bornstein B., He Q., Lin T., Hanna A., Erell E., Tapper N., Mall R. and Niyogi D., Pathway using WUDAPT's Digital Synthetic City tool towards generating urban canopy parameters for multi-scale urban atmospheric modeling, Urban Climate. 2019, 28: 100459.
Deng Q., Ou C., Shen Y.M., Xiang Y., Miao Y. and Li Y., Health effects of physical activity as predicted by particle deposition in the human respiratory tract, Science of The Total Environment. 2019, 657: 819-826.
Deng Q., Deng L., Lu C., Li Y. and Norbäck D., Parental stress and air pollution increase childhood asthma in China, Environmental Research. 2018, 165: 23-31.
Deng Q., Deng L., Miao Y., Guo X. and Li Y., Particle deposition in the human lung: Health implications of particulate matter from different sources, Environmental Research. 2019, 169: 237-245.
Duan S., Luo Z., Yang X. and Li Y., The impact of building operations on urban heat/cool islands under urban densification: A comparison between naturally-ventilated and air-conditioned buildings, Applied Energy. 2019, 235: 129-138.
FAN Y., Hunt J., YIN S. and Li Y., Mean shear flow in recirculating turbulent urban convection and the plume-puff eddy structure below stably stratified inversion layers, Theoretical and Applied Climatology. 2019, 135: 1485-1499.
Fan Y., Li Y. and Yin S., Non-uniform ground-level wind patterns in a heat dome over a uniformly heated non-circular city, International Journal of Heat and Mass Transfer. 2018, 124: 233-246.
LEI H., Tang J.W. and Li Y., Transmission routes of influenza A(H1N1)pdm09: analyses of inflight outbreaks, Epidemiology and Infection. 2018, 146: 1731-1739.
LI Y., Deformation Mechanisms of Advanced Structural Alloys: from Single-phase Alloys to Metal-matrix Composite, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-166.
LI Y., Investigation of Particle Jamming for Compliant Robotic Arm and Soft Robotics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-169.
LI Y., Chen Y.H. and LI Y., Pre-charged pneumatic soft gripper with close loop control, In: IEEE Robotics and Automation Letters, IEEE Robotics and Automation Letters. 2019.
LI Y. and Huang M., Revealing the interfacial plasticity and shear strength of a TiB2-strengthened high-modulus low-density steel, Journal of the Mechanics and Physics of Solids. 2018, 121: 313-327.
LI Y., Chen Y.H., YANG Y. and LI Y., Soft Robotic Grippers Based on Particle Transmission, IEEE/ASME Transaction on Mechatronics.. 2019.
Leung N.H.L., Chan K.H., Chu K.W., Shiu E.Y.C., Hau B.J.P., Mcdevitt J.J., Yen H., Li Y., Ip D.K.M., Leung G.M., Peiris J.S.M., Seto W.H., Milton D.K. and Cowling B.J., Best Abstract in Category 'Infection Control', 17th Asia-Pacific Congress of Clinical Microbiology and Infection cum 8th International Infection Control Conference, Hong Kong Society for Microbiology and Infection Hong Kong Infection Control Nurses’ Association. 2018.
Leung N.H.L., Chan K.H., Chu K.W., SHIU E.Y.C., Hau J.P.B., Mcdevitt J.J., Yen H., Li Y., Ip D.K.M., Leung G.M., Peiris J.S.M., Seto W.H., Milton D.K. and Cowling B.J., Shedding and efficacy of face masks in reducing release of respiratory viruses in human exhaled breath, 17th Asia-Pacific Congress of Clinical Microbiology and Infection cum 8th International Infection Control Conference. 2018.
Li Y., Exploring physics of city ventilation and thermal climate by simulation, The 4th Asia Conference of International Building Performance Simulation Association - ASim2018, 3-5 December, 2018, Hong Kong. 2018.
Li Y., Heat dome and urban warming, International workshop on “Wind Effects on Buildings and Urban Environment”, 10-12 March, 2019, Tokyo.. 2019.
Li Y., Keynote speaker, ” Wind weakening, heat dome and urban warming”, The 2nd International Conference of IASUR “Green Building and Smart City”, Xi-An, China, March 29-31, 2019. 2019.
Li Y., Plenary speech, “How do close contact transmit respiratory infection?”, 第九届中国环境科学学会室内环境与健康分会学术年会暨第四届生物气溶胶国际研讨会. 中国,南京, 2019年5月10-12日.. 2019.
Li Y., The physics in natural ventilation of cities and buildings, The 7th Conference of the International Association of Building Physics, 23-26 September 2018, Syracuse, USA . 2018.
Li Y., Weak winds in buildings and cities, The Asian Built-Environment Leaders Envision (ALBE) Forum 2018, Oct 14-15 2018, Yonsei University, Seoul. 2018.
Li Y., [10] Invited speaker, A mechanism-based modelling study of probable transmission routes of MERS-CoV in a hospital outbreak, Centennial reospect: 3rd International Forum on Influenza Virus & Other Respiratory Viruses, Guangzhou, September 7-9, 2018, Guangzhou, China. 2018.
Mei S.J., Hu J.T., Liu D., Zhao F.Y., Li Y. and Wang H.Q., Airborne pollutant dilution inside the deep street canyons subjecting to thermal buoyancy driven flows: Effects of representative urban skylines, Building and Environment. 2019, 149: 592-606.
WANG K., Li Y., Luo Z., Yin S. and Chan P.W., Harmonic analysis of 130-year hourly air temperature in Hong Kong: detecting urban warming from the perspective of annual and daily cycles, Climate Dynamics. 2018, 51: 613-625.
WANG Q., WANG Y., FAN Y., Hang J. and Li Y., Urban heat island circulations of an idealized circular city as affected by background wind speed, Building and Environment. 2019, 148: 433-447.
Wang K., Li Y., LI Y. and Lin B., Stone forest as a small-scale field model for the study of urban climate, International Journal of Climatology. 2018, 38: 3723-3731.
Wang X., Li Y., Yang X., Chan P., Nichol J. and Li Q., The Street Air Warming Phenomenon in a High-Rise Compact City, Atmosphere. 2018, 9: 402.
Wei J., ZHOU J., Liu Y., Wu J., Jin T., Li Y. and Yen H., A novel partial lid for mechanical defeatherers reduced aerosol dispersion during processing of avian influenza virus infected poultry, PLoS One. 2019, 14(5): e0216478.
Wong C.T., Leung W.T., Fu S.C., Li Y., Law A.K.Y. and Chao Y.H.C., Effect of surface roughness on droplet resuspension behavior, 15th International Conference on Indoor Air Quality and Climate, Indoor Air 2018. USA, paper ID 266.
XIAO S., Tang J.W., Hui D.S., Lei H., Yu H. and Li Y., Probable transmission routes of the influenza virus in a nosocomial outbreak, Epidemiology and Infection. 2018, 146: 1114-1122.
Xie C., Lau E.H.Y., Yoshida T., Yu H., Wang X., Wu H., Wei J., Cowling B.J., Peiris J.S.M., Li Y. and Yen H., Detection of influenza and other respiratory viruses in air sampled from a university campus: a longitudinal study, Clin Infect Dis. 2019.
Xu J.C., Fu S.C., Tso C.Y., Wu C.L., Li Y. and Chao Y.H.C., The impact of sinusoidal airflow produced by personalized ventilation on distribution of airborne droplets, 15th International Conference on Indoor Air Quality and Climate, Indoor Air 2018. USA, paper ID 267.
YIN S., Li Y., FAN Y. and Sandberg M., Experimental investigation of near-field stream-wise flow development and spatial structure in triple buoyant plumes, Building and Environment. 2019, 149: 79-89.
Yin S., Li Y., Fan Y. and Sandberg M., Unsteady large-scale flow patterns and dynamic vortex movement in near-field triple buoyant plumes, Building and Environment. 2018, 142: 288-300.
Zhang D.D., Cai Y., Liu D., Zhao F.Y. and Li Y., Dual steady flow solutions of heat and pollutant removal from a slot ventilated welding enclosure containing a bottom heating source, International Journal of Heat and Mass Transfer. 2019, 132: 11-24.
Zhao P., Li Y., Tsang T.L. and Chan P.T., Equilibrium of particle distribution on surfaces due to touch, Building and Environment. 2018, 143: 461-472.
Zhong H.Y., Zhang D.D., Liu D., Zhao F.Y., Li Y. and Wang H.Q., Two-dimensional numerical simulation of wind driven ventilation across a building enclosure with two free apertures on the rear side: Vortex shedding and “pumping flow mechanism”, Journal of Wind Engineering and Industrial Aerodynamics . 2018, 179: 449-462.
van Hooff T., Nielsen P.V. and Li Y., Computational fluid dynamics predictions of non-isothermal ventilation flow-How can the user factor be minimized?, Indoor Air. 2018, 28: 866-880.


Researcher : LI Y
List of Research Outputs

Bard R.L., Ijaz M.K., Zhang J., Li Y., Bai C., Yang Y., Carcia W.D., Creek J. and Brook R.D., Interventions to Reduce Personal Exposures to Air Pollution, Global Heart. 2019, 14: 47-60.
Ching J., Aliaga D., Mills G., Masson V., See L., Neophytou M., Middel A., Baklanov A., Ren C., Ng E., Fung J., Wong M., Huang Y., Martilli A., Brousse O., Stewart I., Zhang X., Shehata A., Miao S., Wang X., Wang W., Yamagata Y., Duarte D., Li Y., Feddema J., Bechtel B., Hidalgo J., Roustan Y., Kim Y., Simon H., Kropp T., Bruse M., Lindberg F., Grimmond S., Demuzure M., Chen F., Li C., Gonzales-Cruz J., Bornstein B., He Q., Lin T., Hanna A., Erell E., Tapper N., Mall R. and Niyogi D., Pathway using WUDAPT's Digital Synthetic City tool towards generating urban canopy parameters for multi-scale urban atmospheric modeling, Urban Climate. 2019, 28: 100459.
Deng Q., Ou C., Shen Y.M., Xiang Y., Miao Y. and Li Y., Health effects of physical activity as predicted by particle deposition in the human respiratory tract, Science of The Total Environment. 2019, 657: 819-826.
Deng Q., Deng L., Lu C., Li Y. and Norbäck D., Parental stress and air pollution increase childhood asthma in China, Environmental Research. 2018, 165: 23-31.
Deng Q., Deng L., Miao Y., Guo X. and Li Y., Particle deposition in the human lung: Health implications of particulate matter from different sources, Environmental Research. 2019, 169: 237-245.
Duan S., Luo Z., Yang X. and Li Y., The impact of building operations on urban heat/cool islands under urban densification: A comparison between naturally-ventilated and air-conditioned buildings, Applied Energy. 2019, 235: 129-138.
FAN Y., Hunt J., YIN S. and Li Y., Mean shear flow in recirculating turbulent urban convection and the plume-puff eddy structure below stably stratified inversion layers, Theoretical and Applied Climatology. 2019, 135: 1485-1499.
Fan Y., Li Y. and Yin S., Non-uniform ground-level wind patterns in a heat dome over a uniformly heated non-circular city, International Journal of Heat and Mass Transfer. 2018, 124: 233-246.
LEI H., Tang J.W. and Li Y., Transmission routes of influenza A(H1N1)pdm09: analyses of inflight outbreaks, Epidemiology and Infection. 2018, 146: 1731-1739.
LI Y., Deformation Mechanisms of Advanced Structural Alloys: from Single-phase Alloys to Metal-matrix Composite, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-166.
LI Y., Investigation of Particle Jamming for Compliant Robotic Arm and Soft Robotics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-169.
LI Y., Chen Y.H. and LI Y., Pre-charged pneumatic soft gripper with close loop control, In: IEEE Robotics and Automation Letters, IEEE Robotics and Automation Letters. 2019.
LI Y. and Huang M., Revealing the interfacial plasticity and shear strength of a TiB2-strengthened high-modulus low-density steel, Journal of the Mechanics and Physics of Solids. 2018, 121: 313-327.
LI Y., Chen Y.H., YANG Y. and LI Y., Soft Robotic Grippers Based on Particle Transmission, IEEE/ASME Transaction on Mechatronics.. 2019.
Leung N.H.L., Chan K.H., Chu K.W., Shiu E.Y.C., Hau B.J.P., Mcdevitt J.J., Yen H., Li Y., Ip D.K.M., Leung G.M., Peiris J.S.M., Seto W.H., Milton D.K. and Cowling B.J., Best Abstract in Category 'Infection Control', 17th Asia-Pacific Congress of Clinical Microbiology and Infection cum 8th International Infection Control Conference, Hong Kong Society for Microbiology and Infection Hong Kong Infection Control Nurses’ Association. 2018.
Leung N.H.L., Chan K.H., Chu K.W., SHIU E.Y.C., Hau J.P.B., Mcdevitt J.J., Yen H., Li Y., Ip D.K.M., Leung G.M., Peiris J.S.M., Seto W.H., Milton D.K. and Cowling B.J., Shedding and efficacy of face masks in reducing release of respiratory viruses in human exhaled breath, 17th Asia-Pacific Congress of Clinical Microbiology and Infection cum 8th International Infection Control Conference. 2018.
Li Y., Exploring physics of city ventilation and thermal climate by simulation, The 4th Asia Conference of International Building Performance Simulation Association - ASim2018, 3-5 December, 2018, Hong Kong. 2018.
Li Y., Heat dome and urban warming, International workshop on “Wind Effects on Buildings and Urban Environment”, 10-12 March, 2019, Tokyo.. 2019.
Li Y., Keynote speaker, ” Wind weakening, heat dome and urban warming”, The 2nd International Conference of IASUR “Green Building and Smart City”, Xi-An, China, March 29-31, 2019. 2019.
Li Y., Plenary speech, “How do close contact transmit respiratory infection?”, 第九届中国环境科学学会室内环境与健康分会学术年会暨第四届生物气溶胶国际研讨会. 中国,南京, 2019年5月10-12日.. 2019.
Li Y., The physics in natural ventilation of cities and buildings, The 7th Conference of the International Association of Building Physics, 23-26 September 2018, Syracuse, USA . 2018.
Li Y., Weak winds in buildings and cities, The Asian Built-Environment Leaders Envision (ALBE) Forum 2018, Oct 14-15 2018, Yonsei University, Seoul. 2018.
Li Y., [10] Invited speaker, A mechanism-based modelling study of probable transmission routes of MERS-CoV in a hospital outbreak, Centennial reospect: 3rd International Forum on Influenza Virus & Other Respiratory Viruses, Guangzhou, September 7-9, 2018, Guangzhou, China. 2018.
Mei S.J., Hu J.T., Liu D., Zhao F.Y., Li Y. and Wang H.Q., Airborne pollutant dilution inside the deep street canyons subjecting to thermal buoyancy driven flows: Effects of representative urban skylines, Building and Environment. 2019, 149: 592-606.
WANG K., Li Y., Luo Z., Yin S. and Chan P.W., Harmonic analysis of 130-year hourly air temperature in Hong Kong: detecting urban warming from the perspective of annual and daily cycles, Climate Dynamics. 2018, 51: 613-625.
WANG Q., WANG Y., FAN Y., Hang J. and Li Y., Urban heat island circulations of an idealized circular city as affected by background wind speed, Building and Environment. 2019, 148: 433-447.
Wang K., Li Y., LI Y. and Lin B., Stone forest as a small-scale field model for the study of urban climate, International Journal of Climatology. 2018, 38: 3723-3731.
Wang X., Li Y., Yang X., Chan P., Nichol J. and Li Q., The Street Air Warming Phenomenon in a High-Rise Compact City, Atmosphere. 2018, 9: 402.
Wei J., ZHOU J., Liu Y., Wu J., Jin T., Li Y. and Yen H., A novel partial lid for mechanical defeatherers reduced aerosol dispersion during processing of avian influenza virus infected poultry, PLoS One. 2019, 14(5): e0216478.
Wong C.T., Leung W.T., Fu S.C., Li Y., Law A.K.Y. and Chao Y.H.C., Effect of surface roughness on droplet resuspension behavior, 15th International Conference on Indoor Air Quality and Climate, Indoor Air 2018. USA, paper ID 266.
XIAO S., Tang J.W., Hui D.S., Lei H., Yu H. and Li Y., Probable transmission routes of the influenza virus in a nosocomial outbreak, Epidemiology and Infection. 2018, 146: 1114-1122.
Xie C., Lau E.H.Y., Yoshida T., Yu H., Wang X., Wu H., Wei J., Cowling B.J., Peiris J.S.M., Li Y. and Yen H., Detection of influenza and other respiratory viruses in air sampled from a university campus: a longitudinal study, Clin Infect Dis. 2019.
Xu J.C., Fu S.C., Tso C.Y., Wu C.L., Li Y. and Chao Y.H.C., The impact of sinusoidal airflow produced by personalized ventilation on distribution of airborne droplets, 15th International Conference on Indoor Air Quality and Climate, Indoor Air 2018. USA, paper ID 267.
YIN S., Li Y., FAN Y. and Sandberg M., Experimental investigation of near-field stream-wise flow development and spatial structure in triple buoyant plumes, Building and Environment. 2019, 149: 79-89.
Yin S., Li Y., Fan Y. and Sandberg M., Unsteady large-scale flow patterns and dynamic vortex movement in near-field triple buoyant plumes, Building and Environment. 2018, 142: 288-300.
Zhang D.D., Cai Y., Liu D., Zhao F.Y. and Li Y., Dual steady flow solutions of heat and pollutant removal from a slot ventilated welding enclosure containing a bottom heating source, International Journal of Heat and Mass Transfer. 2019, 132: 11-24.
Zhao P., Li Y., Tsang T.L. and Chan P.T., Equilibrium of particle distribution on surfaces due to touch, Building and Environment. 2018, 143: 461-472.
Zhong H.Y., Zhang D.D., Liu D., Zhao F.Y., Li Y. and Wang H.Q., Two-dimensional numerical simulation of wind driven ventilation across a building enclosure with two free apertures on the rear side: Vortex shedding and “pumping flow mechanism”, Journal of Wind Engineering and Industrial Aerodynamics . 2018, 179: 449-462.
van Hooff T., Nielsen P.V. and Li Y., Computational fluid dynamics predictions of non-isothermal ventilation flow-How can the user factor be minimized?, Indoor Air. 2018, 28: 866-880.


Researcher : LI Y
List of Research Outputs

Bard R.L., Ijaz M.K., Zhang J., Li Y., Bai C., Yang Y., Carcia W.D., Creek J. and Brook R.D., Interventions to Reduce Personal Exposures to Air Pollution, Global Heart. 2019, 14: 47-60.
Ching J., Aliaga D., Mills G., Masson V., See L., Neophytou M., Middel A., Baklanov A., Ren C., Ng E., Fung J., Wong M., Huang Y., Martilli A., Brousse O., Stewart I., Zhang X., Shehata A., Miao S., Wang X., Wang W., Yamagata Y., Duarte D., Li Y., Feddema J., Bechtel B., Hidalgo J., Roustan Y., Kim Y., Simon H., Kropp T., Bruse M., Lindberg F., Grimmond S., Demuzure M., Chen F., Li C., Gonzales-Cruz J., Bornstein B., He Q., Lin T., Hanna A., Erell E., Tapper N., Mall R. and Niyogi D., Pathway using WUDAPT's Digital Synthetic City tool towards generating urban canopy parameters for multi-scale urban atmospheric modeling, Urban Climate. 2019, 28: 100459.
Deng Q., Ou C., Shen Y.M., Xiang Y., Miao Y. and Li Y., Health effects of physical activity as predicted by particle deposition in the human respiratory tract, Science of The Total Environment. 2019, 657: 819-826.
Deng Q., Deng L., Lu C., Li Y. and Norbäck D., Parental stress and air pollution increase childhood asthma in China, Environmental Research. 2018, 165: 23-31.
Deng Q., Deng L., Miao Y., Guo X. and Li Y., Particle deposition in the human lung: Health implications of particulate matter from different sources, Environmental Research. 2019, 169: 237-245.
Duan S., Luo Z., Yang X. and Li Y., The impact of building operations on urban heat/cool islands under urban densification: A comparison between naturally-ventilated and air-conditioned buildings, Applied Energy. 2019, 235: 129-138.
FAN Y., Hunt J., YIN S. and Li Y., Mean shear flow in recirculating turbulent urban convection and the plume-puff eddy structure below stably stratified inversion layers, Theoretical and Applied Climatology. 2019, 135: 1485-1499.
Fan Y., Li Y. and Yin S., Non-uniform ground-level wind patterns in a heat dome over a uniformly heated non-circular city, International Journal of Heat and Mass Transfer. 2018, 124: 233-246.
LEI H., Tang J.W. and Li Y., Transmission routes of influenza A(H1N1)pdm09: analyses of inflight outbreaks, Epidemiology and Infection. 2018, 146: 1731-1739.
LI Y., Deformation Mechanisms of Advanced Structural Alloys: from Single-phase Alloys to Metal-matrix Composite, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-166.
LI Y., Investigation of Particle Jamming for Compliant Robotic Arm and Soft Robotics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-169.
LI Y., Chen Y.H. and LI Y., Pre-charged pneumatic soft gripper with close loop control, In: IEEE Robotics and Automation Letters, IEEE Robotics and Automation Letters. 2019.
LI Y. and Huang M., Revealing the interfacial plasticity and shear strength of a TiB2-strengthened high-modulus low-density steel, Journal of the Mechanics and Physics of Solids. 2018, 121: 313-327.
LI Y., Chen Y.H., YANG Y. and LI Y., Soft Robotic Grippers Based on Particle Transmission, IEEE/ASME Transaction on Mechatronics.. 2019.
Leung N.H.L., Chan K.H., Chu K.W., Shiu E.Y.C., Hau B.J.P., Mcdevitt J.J., Yen H., Li Y., Ip D.K.M., Leung G.M., Peiris J.S.M., Seto W.H., Milton D.K. and Cowling B.J., Best Abstract in Category 'Infection Control', 17th Asia-Pacific Congress of Clinical Microbiology and Infection cum 8th International Infection Control Conference, Hong Kong Society for Microbiology and Infection Hong Kong Infection Control Nurses’ Association. 2018.
Leung N.H.L., Chan K.H., Chu K.W., SHIU E.Y.C., Hau J.P.B., Mcdevitt J.J., Yen H., Li Y., Ip D.K.M., Leung G.M., Peiris J.S.M., Seto W.H., Milton D.K. and Cowling B.J., Shedding and efficacy of face masks in reducing release of respiratory viruses in human exhaled breath, 17th Asia-Pacific Congress of Clinical Microbiology and Infection cum 8th International Infection Control Conference. 2018.
Li Y., Exploring physics of city ventilation and thermal climate by simulation, The 4th Asia Conference of International Building Performance Simulation Association - ASim2018, 3-5 December, 2018, Hong Kong. 2018.
Li Y., Heat dome and urban warming, International workshop on “Wind Effects on Buildings and Urban Environment”, 10-12 March, 2019, Tokyo.. 2019.
Li Y., Keynote speaker, ” Wind weakening, heat dome and urban warming”, The 2nd International Conference of IASUR “Green Building and Smart City”, Xi-An, China, March 29-31, 2019. 2019.
Li Y., Plenary speech, “How do close contact transmit respiratory infection?”, 第九届中国环境科学学会室内环境与健康分会学术年会暨第四届生物气溶胶国际研讨会. 中国,南京, 2019年5月10-12日.. 2019.
Li Y., The physics in natural ventilation of cities and buildings, The 7th Conference of the International Association of Building Physics, 23-26 September 2018, Syracuse, USA . 2018.
Li Y., Weak winds in buildings and cities, The Asian Built-Environment Leaders Envision (ALBE) Forum 2018, Oct 14-15 2018, Yonsei University, Seoul. 2018.
Li Y., [10] Invited speaker, A mechanism-based modelling study of probable transmission routes of MERS-CoV in a hospital outbreak, Centennial reospect: 3rd International Forum on Influenza Virus & Other Respiratory Viruses, Guangzhou, September 7-9, 2018, Guangzhou, China. 2018.
Mei S.J., Hu J.T., Liu D., Zhao F.Y., Li Y. and Wang H.Q., Airborne pollutant dilution inside the deep street canyons subjecting to thermal buoyancy driven flows: Effects of representative urban skylines, Building and Environment. 2019, 149: 592-606.
WANG K., Li Y., Luo Z., Yin S. and Chan P.W., Harmonic analysis of 130-year hourly air temperature in Hong Kong: detecting urban warming from the perspective of annual and daily cycles, Climate Dynamics. 2018, 51: 613-625.
WANG Q., WANG Y., FAN Y., Hang J. and Li Y., Urban heat island circulations of an idealized circular city as affected by background wind speed, Building and Environment. 2019, 148: 433-447.
Wang K., Li Y., LI Y. and Lin B., Stone forest as a small-scale field model for the study of urban climate, International Journal of Climatology. 2018, 38: 3723-3731.
Wang X., Li Y., Yang X., Chan P., Nichol J. and Li Q., The Street Air Warming Phenomenon in a High-Rise Compact City, Atmosphere. 2018, 9: 402.
Wei J., ZHOU J., Liu Y., Wu J., Jin T., Li Y. and Yen H., A novel partial lid for mechanical defeatherers reduced aerosol dispersion during processing of avian influenza virus infected poultry, PLoS One. 2019, 14(5): e0216478.
Wong C.T., Leung W.T., Fu S.C., Li Y., Law A.K.Y. and Chao Y.H.C., Effect of surface roughness on droplet resuspension behavior, 15th International Conference on Indoor Air Quality and Climate, Indoor Air 2018. USA, paper ID 266.
XIAO S., Tang J.W., Hui D.S., Lei H., Yu H. and Li Y., Probable transmission routes of the influenza virus in a nosocomial outbreak, Epidemiology and Infection. 2018, 146: 1114-1122.
Xie C., Lau E.H.Y., Yoshida T., Yu H., Wang X., Wu H., Wei J., Cowling B.J., Peiris J.S.M., Li Y. and Yen H., Detection of influenza and other respiratory viruses in air sampled from a university campus: a longitudinal study, Clin Infect Dis. 2019.
Xu J.C., Fu S.C., Tso C.Y., Wu C.L., Li Y. and Chao Y.H.C., The impact of sinusoidal airflow produced by personalized ventilation on distribution of airborne droplets, 15th International Conference on Indoor Air Quality and Climate, Indoor Air 2018. USA, paper ID 267.
YIN S., Li Y., FAN Y. and Sandberg M., Experimental investigation of near-field stream-wise flow development and spatial structure in triple buoyant plumes, Building and Environment. 2019, 149: 79-89.
Yin S., Li Y., Fan Y. and Sandberg M., Unsteady large-scale flow patterns and dynamic vortex movement in near-field triple buoyant plumes, Building and Environment. 2018, 142: 288-300.
Zhang D.D., Cai Y., Liu D., Zhao F.Y. and Li Y., Dual steady flow solutions of heat and pollutant removal from a slot ventilated welding enclosure containing a bottom heating source, International Journal of Heat and Mass Transfer. 2019, 132: 11-24.
Zhao P., Li Y., Tsang T.L. and Chan P.T., Equilibrium of particle distribution on surfaces due to touch, Building and Environment. 2018, 143: 461-472.
Zhong H.Y., Zhang D.D., Liu D., Zhao F.Y., Li Y. and Wang H.Q., Two-dimensional numerical simulation of wind driven ventilation across a building enclosure with two free apertures on the rear side: Vortex shedding and “pumping flow mechanism”, Journal of Wind Engineering and Industrial Aerodynamics . 2018, 179: 449-462.
van Hooff T., Nielsen P.V. and Li Y., Computational fluid dynamics predictions of non-isothermal ventilation flow-How can the user factor be minimized?, Indoor Air. 2018, 28: 866-880.


Researcher : LI Z
List of Research Outputs

LI Z., FANG G., HO J.D.-.L., LAM C.I., YIM Y.W., CHAN J.Y.K. and Kwok K.W., Augmented Reality-Guided Visual Servoing for Flexible Endoscope Control, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems, 2019.


Researcher : LIU C
List of Research Outputs

CHEN J., Liu C., Huang Y.T., Lee H. and Feng S.P.T., Study of the growth mechanisms of nanoporous Ag flowers for non-enzymatic glucose detection, Nanotechnology. 2018, 29: 505501.
LIU C., Crystal Engineering Using Electrochemical Approach: Mechanism and Applications, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-135.
LIU C., Li X., Xu F., Cong H., Li Z., Song Y. and Wang M., Spatio-temporal release of NGF and GDNF from multi-layered nanofibrous bicomponent electrospun scaffolds, Journal of Materials Science: Materials in Medicine. Netherlands, Springer, 2018, 29(7): pp.13.
Li X.H., Liu C., Feng S.P.T. and Fang N.X.L., Broadband Light Management with Thermochromic Hydrogel Microparticles for Smart Windows, Joule. 2019, 3: 290-302.


Researcher : LIU C
List of Research Outputs

CHEN J., Liu C., Huang Y.T., Lee H. and Feng S.P.T., Study of the growth mechanisms of nanoporous Ag flowers for non-enzymatic glucose detection, Nanotechnology. 2018, 29: 505501.
LIU C., Crystal Engineering Using Electrochemical Approach: Mechanism and Applications, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-135.
LIU C., Li X., Xu F., Cong H., Li Z., Song Y. and Wang M., Spatio-temporal release of NGF and GDNF from multi-layered nanofibrous bicomponent electrospun scaffolds, Journal of Materials Science: Materials in Medicine. Netherlands, Springer, 2018, 29(7): pp.13.
Li X.H., Liu C., Feng S.P.T. and Fang N.X.L., Broadband Light Management with Thermochromic Hydrogel Microparticles for Smart Windows, Joule. 2019, 3: 290-302.


Researcher : LIU H
List of Research Outputs

LIU H., Chen M.Z. and Chen Y.H., When joggers meet robots: the past, present, and future of research on humanoid robots, Bio-Design and Manufacturing. 2019.
Siu K.W., Liu H. and Ngan A.H.W., A universal law for metallurgical effects on acoustoplasticity, Materialia. Elsevier, 2019, 5: 100214.


Researcher : LIU J
List of Research Outputs

LIU J., Structured Controller Synthesis of Linear Multivariable Systems, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-116.


Researcher : LIU L
List of Research Outputs

He B., LIU L. and Huang M., Room-Temperature Quenching and Partitioning Steel, Metallurgical and Materials Transactions A. 2018, 49: 3167-3172.


Researcher : LIU N
List of Research Outputs

LIU N., Characterization and Control of Small Axial-flow Fan Noise, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-183.


Researcher : LIU T
List of Research Outputs

LIU T., Employing the Theory of Nonlinear Waves to Study Rogue Modes and Stratified Fluid Flows, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-109.
LIU T., Chan H.N., Grimshaw R.H.J. and Chow K.W., Internal rogue waves in stratified flows and the dynamics of wave packets, Nonlinear Analysis: Real World Applications. England, Pergamon-elsevier Science Ltd, 2018, 44: 449-464.


Researcher : LU X
List of Research Outputs

LU X., Leung Y.C.D., Wang H.Z. and Xuan J., Microfluidics-based pH-differential reactor for CO2 utilization: A mathematical study, Applied Energy. UK, Elsevier Science Ltd., 2018, 227: 525-532.


Researcher : LU Y
List of Research Outputs

Chan Y.K., LU Y., Wong D. and Shum H.C., Emulsification of silicone oil (SiO) tamponade with high-molecular-weight (HMW) additive under simulated saccadic eye movements in vitro using an “Eye-on-a-Chip”, The Association for Research in Vision and Ophthalmology (ARVO) Annual Meeting 2018, Investigative Ophthalmology & Visual Science. The Association for Research in Vision and Ophthalmology, 2018, 59: 5927.
LU Y., Chan Y.K., CHAO Y., Shih K.C., Lai J.S.M., Wong S.H.D. and Shum H.C., Adhesion of silicone oil and emulsification: an in vitro assessment using a microfluidic device and ‘Eye‐on‐a‐Chip’, Acta Ophthalmologica. 2018.
LU Y., Impingement of a Compound Drop on a Substrate and Emulsification of Silicone Oil in an Eye-on-a-Chip, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-76.


Researcher : LUN TLT
List of Research Outputs

Kwok K.W., LUN T.L.T., HO J.D.-.L., Lee K.H. and Wong K.K.Y., CN Patent: Real-time Surface Shape Sensing for Flexible Structures Using Fiber Bragg Gratings, CN 201910552110.1, 2019.
Kwok K.W., LUN T.L.T., HO J.D.-.L., Lee K.H. and Wong K.K.Y., US Patent: Real-time Surface Shape Sensing for Flexible Structures Using Fiber Bragg Gratings, US 16/449,063, 2019.
LUN T.L.T., Real-time Surface Shape Sensing for Monitoring Flexible Structures Using Fiber Bragg Grating, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-121.
LUN T.L.T., WANG K., HO J.D.-.L., Lee K.H., Sze K.Y. and Kwok K.W., Real-time Surface Shape Sensing for Soft and Flexible Structures using Fiber Bragg Gratings, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1454 - 1461.
Tang S.C., LUN T.L.T., GUO Z., Kwok K.W. and McDannold N.J., First Place Prize Paper Award , 2017 IEEE Transactions on Power Electronics. 2018.


Researcher : LUO Z
List of Research Outputs

LUO Z., Deformation and Fracture Behaviour of Twinning-induced Plasticity Steels, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-147.
LUO Z. and Huang M., Effect of Aluminum and Grain Size on the Fracture Behavior of Twinning-Induced Plasticity Steels, Metallurgical and Materials Transactions B. 2018.
LUO Z. and Huang M., Revealing the Fracture Mechanism of Twinning-Induced Plasticity Steels, steel research international. 2018, 89: 1700433.


Researcher : Lam HN
Project Title:GIS -based Intelligent Management of Building Facilities and Security System
Investigator(s):Lam HN
Department:Mechanical Engg
Source(s) of Funding:Small Project Funding
Start Date:11/2007


Project Title:Building energy pile and low-temperature distillation for novel integration of energy-efficient air conditioning and high-quality drinking water
Investigator(s):Lam HN
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011




Researcher : Lam J
Project Title:Outstanding Researcher Award 2007-2008
Investigator(s):Lam J
Department:Mechanical Engg
Source(s) of Funding:Outstanding Researcher Award
Start Date:10/2008


Project Title:Robust Synthesis of Quantum Systems
Investigator(s):Lam J
Department:Mechanical Engg
Source(s) of Funding:Small Project Funding
Start Date:01/2009


Project Title:Control Synthesis and Approximation of Jump Systems with Uncertain Transitions and Positive Characteristics
Investigator(s):Lam J
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2011


Project Title:Synthesis for Constrained Functional Differential Systems under Limited Capacity and Imperfect Measurement
Investigator(s):Lam J
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2012


Project Title:Reachable Set of Time-Lag Systems: Estimation and Synthesis
Investigator(s):Lam J
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2014


Project Title:Structured and Fixed-order Synthesis for Positive Systems under Gain Performances
Investigator(s):Lam J
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2015


Project Title:Synthesis of Switched Systems using Hybrid Laws
Investigator(s):Lam J
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2016


Project Title:Analysis of Time-Triggered Boolean Networks
Investigator(s):Lam J
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2017
Completion Date:04/2019


Project Title:Adaptive Health Aware Mission Planning for Unmanned Aerial Vehicles
Investigator(s):Lam J
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2018


Project Title:Analysis and Synthesis for Networked Control Systems: A Privacy-preserving Perspective
Investigator(s):Lam J
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


Project Title:Finite-time Control of Markovian Jump Systems
Investigator(s):Lam J, Lin H
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2019


List of Research Outputs

Chen Y., Lam J., Cui Y., Shen J. and Kwok K.W., Reachable Set Estimation and Synthesis for Periodic Positive Systems, IEEE Transactions on Cybernetics. IEEE, 2019, 1 - 22.
Chen Y., Lam J., Shen J., Du B. and Li P., Reachable set estimation for switched positive systems, International Journal of Systems Science. England, Taylor & Francis Ltd, 2018, 49: 2341-2352.
Chen Y., Lam J., Cui Y. and Kwok K.W., Switched Systems Approach to State Bounding for Time Delay Systems, Information Sciences. Elsevier, 2018, 465: 191-201.
FAN C., Lam J. and XIE X., Peak-to-peak filtering for periodic piecewise linear polytopic systems, International Journal of Systems Science. 2018, 49(9): 1997-2011.
HO J.D.-.L., LEE K.H., Tang W.L., Hui K.M., Althoefer K., Lam J. and Kwok K.W., Localised Online Learning-Based Control of a Soft Redundant Manipulator Under Variable Loading, Advanced Robotics. 2018, 32(21): 1-16.
Kazemy A., Lam J. and Li X., Finite-frequency H¥ control for offshore platforms subject to parametric model uncertainty and practical hard constraints, ISA Transactions. USA, Elsevier Science Inc, 2018, 83: 53-65.
Lam J., Member, Editorial Advisory Board, Sci. 2018.
Li P., Lam J., Lu R. and Kwok K.W., Stability and L2 Synthesis of A Class of Periodic Piecewise Time-varying Systems, IEEE Transactions on Automatic Control. IEEE, 2018, 64(8): 3378-3384.
Li Z.Y., Lam J. and Fang R., Mean square stability of linear stochastic neutral‐type time‐delay systems with multiple delays, International Journal of Robust and Nonlinear Control. USA, Wiley, 2019, 29: 451-472.
Liu M., Lam J., ZHU B. and Kwok K.W., On Positive Realness, Negative Imaginariness, and H∞ Control of State-space Symmetric Systems, Automatica. England, Pergamon-elsevier Science Ltd, 2019, 101: 190-196.
Meng M., Lam J., Feng J. and Cheung K.C., Stability and Guaranteed Cost Analysis of Time-Triggered Boolean Networks, IEEE Transactions on Neural Networks and Learning Systems. USA, IEEE-Inst Electrical Electronics Engineers Inc, 2018, 29: 3893-3899.
Meng M., Lam J., Feng J. and Cheung K.C., Stability and Stabilization of Boolean Networks with Stochastic Delays, IEEE Transactions on Automatic Control. USA, IEEE-Inst Electrical Electronics Engineers Inc, 2019, 64(2): 1-1.
Song G., Lam J. and Xu S., Quantized feedback stabilization of continuous time-delay systems subject to actuator saturation, Nonlinear Analysis: Hybrid Systems. England, Elsevier Science Ltd, 2018, 30: 1-13.
Su H., Wu H. and Lam J., Positive Edge-Consensus for Nodal Networks via Output Feedback, IEEE Transactions on Automatic Control. USA, IEEE-Inst Electrical Electronics Engineers Inc, 2019, 64(3): 1244-1249.
XIE X., Lam J. and Li P., A novel H¥ tracking control scheme for periodic piecewise time-varying systems, Information Sciences. USA, Elsevier Science Inc, 2019, 484: 71-83.
XIE X. and Lam J., Guaranteed cost control of periodic piecewise linear time-delay systems, Automatica. England, Pergamon-elsevier Science Ltd, 2018, 94: 274-282.
XIE X., Lam J. and FAN C., Robust time-weighted guaranteed cost control of uncertain periodic piecewise linear systems, Information Sciences. USA, Elsevier Science Inc, 2018, 460-461: 238-253.
Xiang W., Lam J. and Li P., On stability and H¥ control of switched systems with random switching signals, Automatica. England, Pergamon-elsevier Science Ltd, 2018, 95: 419-425.
Yang X., Zhou B. and Lam J., Bounded control of feedforward time-delay systems with linearized systems consisting of chain of oscillators, International Journal of Robust and Nonlinear Control. USA, Wiley, 2019, 29: 283-305.
ZHU B., Lam J. and Song X., Stability and L1-gain analysis of linear periodic piecewise positive systems, Automatica. England, Pergamon-elsevier Science Ltd, 2019, 101: 232-240.


Researcher : Lam KL
Project Title:Autophagy: From Model Systems to Therapeutic Opportunities; Roles of actin cytoskeletal dynamics on cyclic compression-induced autophagy in 3D collagen encapsulated human mesenchymal stem cells
Investigator(s):Lam KL
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:02/2019
Completion Date:02/2019




Researcher : Lee H
List of Research Outputs

CHEN J., Liu C., Huang Y.T., Lee H. and Feng S.P.T., Study of the growth mechanisms of nanoporous Ag flowers for non-enzymatic glucose detection, Nanotechnology. 2018, 29: 505501.
CHENG R., Chung C., Zhang H., ZHOU Z., Zhai P., Huang Y.T., Lee H. and Feng S.P.T., An Air Knife-Assisted Recrystallization Method for Ambient-Process Planar Perovskite Solar Cells and Its Dim-Light Harvesting, Small. 2019, 15: 1804465.
Lee H., HUANG Y.-.T., HORN M. and Feng S.P.T., Engineered optical and electrical performance of rf-sputtered undoped nickel oxide thin films for inverted perovskite solar cells, Scientific Reports. 2018, 8.
XU Z., CHEN M., Lee H., Feng S.P.T., Park J.Y., Lee S. and Kim J., X-ray-Powered Micromotors, ACS Applied Materials & Interfaces. 2019, 11: 15727-15732.
Zhai P., CHENG R., REN L., Huang Y.T., Lee H. and Feng S.P.T., In Situ Interface Engineering of TiO 2 Nanocrystals for Fully Ambient-Processed Perovskite Solar Cells , Solar RRL. 2018, 1800103.


Researcher : Leung MKH
Project Title:Indoor air quality control and mitigation measures for printing plants
Investigator(s):Leung MKH
Department:Mechanical Engg
Source(s) of Funding:Occupational Safety and Health Council - Research Grant Projects
Start Date:03/2003


Project Title:Local exhaust ventilation for protection against nosocomial infection of SARS
Investigator(s):Leung MKH
Department:Mechanical Engg
Source(s) of Funding:VCO SARS Research Fund
Start Date:07/2003


Project Title:Environmental friendly cold water thawing for catering industry
Investigator(s):Leung MKH
Department:Mechanical Engg
Source(s) of Funding:Environmental Research, Technology Demonstration Projects
Start Date:07/2003


Project Title:Novel local exhaust ventilation device for printing industry
Investigator(s):Leung MKH
Department:Mechanical Engg
Source(s) of Funding:The OSH Enhancement Scheme for SMEs
Start Date:10/2004


Project Title:Domestic Single-Phase Heat Pump Water Heater and Air Conditioner
Investigator(s):Leung MKH, Leung YCD
Department:Mechanical Engg
Source(s) of Funding:CLP Power Hong Kong Ltd. - General Award
Start Date:08/2007


Project Title:Enhancement of integrated heat pumps for energy savings in hot water and air-conditioning at home
Investigator(s):Leung MKH, Leung YCD, Liu CH
Department:Mechanical Engg
Source(s) of Funding:Environment and Conservation Fund
Start Date:06/2008


Project Title:Study of manifold airflow dynamics and NOx formation mechanisms in solar gas turbine for performance enhancement
Investigator(s):Leung MKH
Department:Mechanical Engg
Source(s) of Funding:Small Project Funding
Start Date:12/2008


Project Title:TiO2-WO3 nanotube array coated on glass substrate for enhanced photoelectrocatalysis
Investigator(s):Leung MKH
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2010




Researcher : Leung YC
Project Title:Production of biodiesel fuel using grease trap waste oil
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Dynamic Progress International Ltd. - General Award
Start Date:08/2005


Project Title:Photocatalytic production of clean and renewable hydrogen fuel
Investigator(s):Leung YCD, Leung MKH
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2006


Project Title:Hong Kong Biogenic VOCs emission study
Investigator(s):Leung YCD, Liu CH
Department:Mechanical Engg
Source(s) of Funding:Environment Protection Department - General Award
Start Date:07/2007


Project Title:Study on the use of wet scrubber for cleaning the exhaust gas from ferry
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Urban and Environmental Studies - General Award
Start Date:11/2007


Project Title:Microfluidic aluminum-air cells for high-density energy storage
Investigator(s):Leung YCD, Wang H
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2014


Project Title:Mechanistic study of the degradation of multiple indoor air pollutants through Vacuum UV photocatalysis
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:NSFC/RGC Joint Research Scheme
Start Date:01/2016


Project Title:Technological and system development of a new purification process for multiple air pollutants
Investigator(s):Leung YCD, Yam WC, Tsang CHA
Department:Mechanical Engg
Source(s) of Funding:Guangdong-Hong Kong Technology Cooperation Funding Scheme
Start Date:09/2016


Project Title:Study on cathode materials for the development of aluminum-ion batteries
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2017


Project Title:Development of Thermoelectric Materials
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:EHS Tech International Ltd.
Start Date:07/2017


Project Title:Printable Al-air battery for the next-generation single-use and disposable devices
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:04/2018


Project Title:Development of a natural material based photocatalyst for air pollutant degradation under irradiation of light from LED and fluorescent tubes
Investigator(s):Leung YCD, Xia D
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2018


Project Title:Outstanding Research Student Supervisor Award 2017-18
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Outstanding Research Student Supervisor Award
Start Date:12/2018


Project Title:International Conference on Innovative Applied Energy 2019; Application of innovative microfluidic and paper based Al-air batteries for portable devices
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:03/2019
Completion Date:03/2019


Project Title:Study on the widespread usage of electric private cars in Hong Kong: hurdles and enhancement measures
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Environment and Conservation Fund
Start Date:05/2019


List of Research Outputs

Leung Y.C., Editorial Board Member , In: Leung Y.C., Applied Energy (Editorial Board Member). Elsevier, 2019.
Leung Y.C., Editorial Board Member, Applied Energy. 2019.
Leung Y.C., Specialty Chief Editor, Frontiers in Environmental Sciences. Swiss, Frontiers Media S.A., 2019.
Leung Y.C., Specialty Chief Editor, Frontiers in Environmental Sciences. Swiss, Frontiers Media S.A., 2018.


Researcher : Leung YCD
Project Title:Production of biodiesel fuel using grease trap waste oil
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Dynamic Progress International Ltd. - General Award
Start Date:08/2005


Project Title:Photocatalytic production of clean and renewable hydrogen fuel
Investigator(s):Leung YCD, Leung MKH
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2006


Project Title:Hong Kong Biogenic VOCs emission study
Investigator(s):Leung YCD, Liu CH
Department:Mechanical Engg
Source(s) of Funding:Environment Protection Department - General Award
Start Date:07/2007


Project Title:Study on the use of wet scrubber for cleaning the exhaust gas from ferry
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Urban and Environmental Studies - General Award
Start Date:11/2007


Project Title:Microfluidic aluminum-air cells for high-density energy storage
Investigator(s):Leung YCD, Wang H
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2014


Project Title:Mechanistic study of the degradation of multiple indoor air pollutants through Vacuum UV photocatalysis
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:NSFC/RGC Joint Research Scheme
Start Date:01/2016


Project Title:Technological and system development of a new purification process for multiple air pollutants
Investigator(s):Leung YCD, Yam WC, Tsang CHA
Department:Mechanical Engg
Source(s) of Funding:Guangdong-Hong Kong Technology Cooperation Funding Scheme
Start Date:09/2016


Project Title:Study on cathode materials for the development of aluminum-ion batteries
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2017


Project Title:Development of Thermoelectric Materials
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:EHS Tech International Ltd.
Start Date:07/2017


Project Title:Printable Al-air battery for the next-generation single-use and disposable devices
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:04/2018


Project Title:Development of a natural material based photocatalyst for air pollutant degradation under irradiation of light from LED and fluorescent tubes
Investigator(s):Leung YCD, Xia D
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2018


Project Title:Outstanding Research Student Supervisor Award 2017-18
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Outstanding Research Student Supervisor Award
Start Date:12/2018


Project Title:International Conference on Innovative Applied Energy 2019; Application of innovative microfluidic and paper based Al-air batteries for portable devices
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:03/2019
Completion Date:03/2019


Project Title:Study on the widespread usage of electric private cars in Hong Kong: hurdles and enhancement measures
Investigator(s):Leung YCD
Department:Mechanical Engg
Source(s) of Funding:Environment and Conservation Fund
Start Date:05/2019


List of Research Outputs

Fang R., Huang W., Huang H.B., Feng Q., He M., Ji J., Liu B. and Leung Y.C.D., Efficient MnOx/SiO2@AC catalyst for ozone-catalytic oxidation of gaseous benzene at ambient temperature, Applied Surface Science. Netherlands, Elsevier Science BV, 2019, 470: 439-447.
KWOK Y.H., Wang Y., WU M., LI F., ZHANG Y., Zhang H. and Leung Y.C.D., A dual fuel microfluidic fuel cell utilizing solar energy and methanol, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 409: 58-65.
LI F. and Leung Y.C.D., Investigation of palladium nanoparticles loaded onto TiO2 nanorod/FTO for enhancement of photoelectro-chemical performance, Proceeding of the 3rd International Conference on Catalysis and Chemical Engineering. USA, USG United Scientific Group, 2019, 4 pages.
LI F., Huang H.B., Li G.S. and Leung Y.C.D., TiO2 nanotube arrays modified with nanoparticles of platinum group metals (Pt, Pd, Ru): enhancement on photoelectrochemical performance, Journal of Nanoparticle Research. Netherlands, Springer, 2019, 21.
LU X., Leung Y.C.D., Wang H.Z. and Xuan J., Microfluidics-based pH-differential reactor for CO2 utilization: A mathematical study, Applied Energy. UK, Elsevier Science Ltd., 2018, 227: 525-532.
Leung Y.C.D., Application of innovative microfluidic and paper based Al-air batteries for portable devices, International Conference on Innovative Applied Energy (IAPE’19). Oxford, UK, 2019.
Leung Y.C.D., Carbon capture and storage: Technologies development and current status, International Conference on Sustainable Energy & Green Technology (SEGT2019). Kuala Lumpur, Malaysia, 2018.
Leung Y.C.D., Editorial Board Member, Applied Sciences. 2019.
Leung Y.C.D., Efficient degradation of water pollutants and air disinfection by VUV assisted photocatalysis, 4th International Conference on Photocatalytic and advanced Oxidation Technologies for the Treatment of Water, Air, Soil and Surfaces (PAOT4). Porto, Portugal, 2018.
Leung Y.C.D., Renewable energy researches at HKU, Energy Saving Championship 2018 Organized by EMSD. Hong Kong, 2018.
Leung Y.C.D., Status and challenges of carbon mediation for the power and energy industry in China, International Conference on Power & Energy Technology (ICPET2018). Lille, France, 2018.
PAN W., Wang Y., KWOK Y.H. and Leung Y.C.D., A low-cost portable cotton-based aluminum-air battery with high specific energy, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 179-185.
Shu Y., Xu Y., Huang H.B., Ji J., Liang S., WU M. and Leung Y.C.D., Catalytic oxidation of VOCs over Mn/TiO2/activated carbon under 185 nm VUV irradiation, Chemosphere. UK, Pergamon-elsevier Science Ltd., 2018, 208: 550-558.
Shu Y., He M., Ji J., Huang H.B., Liu S. and Leung Y.C.D., Synergetic degradation of VOCs by vacuum ultraviolet photolysis and catalytic ozonation over Mn-xCe/ZSM-5, Journal of Hazardous Materials. Netherlands, Elsevier Science BV, 2019, 364: 770-779.
Tsang C.H.A., Li K., Zeng Y., Zhao W., Zhang T., Zhan Y., Xie R., Leung Y.C.D. and Huang H.B., Titanium oxide based photocatalytic materials development and their role of in the air pollutants degradation: Overview and forecast, Environment International. UK, Pergamon-elsevier Science Ltd, 2019, 125: 200-228.
WU M., Leung Y.C.D., ZHANG Y., Huang H.B., Xie R., Szeto W. and LI F., Toluene degradation over Mn-TiO2/CeO2 composite catalyst under vacuum ultraviolet (VUV) irradiation, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 195: 985-994.
WU M., ZHANG Y., Szeto W. and Leung Y.C.D., VOC degradation over nano CeO2 photocatalysts under VUV irradiation, International Conference on Chemistry and the Environment. Greene, EuchemS, 2019, Abstract Book: pp.1.
WU M., ZHANG Y., Szeto W., PAN W., Huang H.B. and Leung Y.C.D., Vacuum ultraviolet (VUV)-based photocatalytic oxidation for toluene degradation over pure CeO2, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 200: 203-213.
Wang Y., KWOK Y.H., ZHANG Y., PAN W. and Leung Y.C.D., Flexible hydrogen fuel cell fabricated on paper with embedded aluminium foil, Proceeding of the International Symposium on Hydrogen Energy & Energy Technologies (HEET2018). Japan, 2019, E3S Web of Conference 83,01004 (2019): pp.8.
Wang Y., KWOK Y.H., PAN W., Zhang H.M. and Leung Y.C.D., Innovative paper-based Al-air batteries as a low-cost and green energy technology for the miniwatt market, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 414: 278-282.
Wang Y., PAN W., KWOK Y.H., Lu X. and Leung Y.C.D., Low-cost Al-air batteries with paper-based solid electrolyte, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 522-527.
Xia D., Xu W., Wang Y., Yang J., Huang Y., Hu L., He C., Shu D., Leung Y.C.D. and Pang Z., Enhanced Performance and Conversion Pathway for Catalytic Ozonation of Methyl Mercaptan on Single-Atom Ag Deposited Three-Dimensional Ordered Mesoporous MnO2, Environmental Science & Technology. Washington, USA, American Chemical Soc, 2018, 52: 13399-13409.
Zhang H.M., Wang Y., KWOK Y.H., Wu Z.C., Xia D.H. and Leung Y.C.D., A Direct Ammonia Microfluidic Fuel Cell using NiCu Nanoparticles Supported on Carbon Nanotubes as an Electrocatalyst, ChemSusChem. Weinheim, Germany, Wiley-VCH Verlag GmbH & Co., 2018, 11: 2889-2897.
Zhang H.M., Wang H.Z., Luo X., Leung Y.C.D., Pang Q., Xu H., Zhang L. and Xuan J., Toward a mechanistic understanding of microfluidic droplet-based extraction and separation of lanthanides, Chemical Engineering Journal. Switzerland, Elsevier Science BV, 2019, 356: 673-679.
Zhao W., Dai B., Zhu F., Tu X., Xu J., Zhang L., Li S., Leung Y.C.D. and Sun C., A novel 3D plasmonic p-n heterojunction photocatalyst: Ag nanoparticles on flower-like p-Ag2S/n-BiVO4 and its excellent photocatalytic reduction and oxidation activities, Applied Catalysis B: Environmental. Netherlands, Elsevier Science BV, 2018, 229: 171-180.
Zhao W., Feng Y., Huang H.B., Zhou P.C., Li J., Zhang L., Dai B., Xu J., Zhu F. and Leung Y.C.D., A novel z-scheme Ag3VO4/BiVO4 heterojunction photocatalyst: study on the execellent photocatalytic performance and photocatalytic mechanism, Applied Catalysis B: Environmental. UK, Elsevier Science Ltd., 2019, 245: 448-458.
Zhao W., Zhang J., Zhu F., Mu F., Zhang L., Dai B., Xu J., Zhu A., Sun C. and Leung Y.C.D., Study the photocatalytic mechanism of the novel Ag/p-Ag2O/n-BiVO4 plasmonic photocatalyst for the simultaneous removal of BPA and chromium(VI), Chemical Engineering Journal. UK, Elsevier Science Ltd., 2019, 361: 1352-1362.


Researcher : Li J
List of Research Outputs

CHEN X., YI J., Li J., ZHOU J. and Wang Z., Soft-Actuator-Based Robotic Joint for Safe and Forceful Interaction With Controllable Impact Response, IEEE Robotics and Automation Letters. 2018, 3: 3505-3512.
LI J., SHEN Z., Xu W.Y.T., Lam Y.H.W., Hsung R.T.C., Pow E.H.N., Kosuge K. and Wang Z., A Compact Dental Robotic System Using Soft Bracing Technique, IEEE Robotics and Automation Letters. 2019, 4: 1271 - 1278.
LI J., SUN H. and Wang M., A novel facile method for bijels fabrication, 2019 Spring Meeting of the European Materials Research Society (E-MRS). Nice, France, 2019, 1 pp.
LI J., SUN H. and Wang M., Bijels-derived hybrid hydrogel membranes as delivery vehicles for the controlled release of bio-agents, HKU-Osaka University Joint Symposium on Materials Research. Osaka, Japan, 2018, 1 pp.
LI J., Kong T., Yu J., Lee K.H., Tang Y.H., Kwok K.W., Kim J. and Shum H.C., Electrocoiling-guided Printing of Multiscale Architectures at Single-wavelength Resolution, Lab on a Chip. Royal Society of Chemistry, 2019, 19(11): 1953-1960.
LI J., SUN H., Haase M.F. and Wang M., Fabrication and characteristics of bijels-derived hybrid hydrogel membranes for anticancer drug delivery, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
LI J., Zhang Y., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., Robotic System for Automatic Dental Restorations in Oral Cavity, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
Li J., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., A Customizable, Compact Robotic Manipulator for Assisting Multiple Dental Procedures, IEEE International Conference on Advanced Robotics and Mechatronics (ICARM2018). 2018, 1-6.
Zhang T.Y., Xu W.Y.T., Tao Y.F., Tsang H.Y., LI J. and Wang Z., Hong Kong X Best FYP Award 2019, Hong Kong X Tech. 2019.
Zhang T.Y., Xu W.Y.T., Tao Y.F., Tsang H.Y., LI J. and Wang Z., IMechE Best Student Project of the Year 2018: Dental Robotic Manipulator, Institute of Mechanical Engineers HK (IMechE). 2019.


Researcher : Li P
List of Research Outputs

Chen Y., Lam J., Shen J., Du B. and Li P., Reachable set estimation for switched positive systems, International Journal of Systems Science. England, Taylor & Francis Ltd, 2018, 49: 2341-2352.
Li P., Lam J., Lu R. and Kwok K.W., Stability and L2 Synthesis of A Class of Periodic Piecewise Time-varying Systems, IEEE Transactions on Automatic Control. IEEE, 2018, 64(8): 3378-3384.


Researcher : Li W
Project Title:Development of Novel Resist Materials and Fabrication Methods for Sub-10 nm Nanoimprint Templates Made by Helium Ion Beam Lithography
Investigator(s):Li W
Department:Mechanical Engg
Source(s) of Funding:NWO / RGC Joint Research Scheme - Travel Grants
Start Date:07/2012


Project Title:Lab-on-a-fiber Surface-enhanced Sensing Devices: Rationally Designed Optical Antennas on an Intrinsically Light-coupled Substrate
Investigator(s):Li W
Department:Mechanical Engg
Source(s) of Funding:Early Career Scheme (ECS)
Start Date:09/2015


Project Title:Solution-processed Flexible and Stretchable Transparent Electrodes with Embedded and Anchored Sub-micron Metal Mesh
Investigator(s):Li W
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:07/2016


Project Title:Novel methods for creating diamond nitrogen-vacancy centers using focused helium ion beam
Investigator(s):Li W
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:04/2017
Completion Date:03/2019


Project Title:Development of Fast Reconfigurable Two-beam Interference Nanolithography Equipment
Investigator(s):Li W
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:05/2017


Project Title:Environment-friendly and Cost-effective Imprinted Metallization on Polymeric Substrates for Flexible Circuits
Investigator(s):Li W, Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Support Programme (Tier 3)
Start Date:05/2018


Project Title:Environment-friendly and Cost-effective Imprinted Metallization on Polymeric Substrates for Flexible Circuits
Investigator(s):Li W, Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:05/2018


Project Title:Environment-friendly and Cost-effective Imprinted Metallization on Polymeric Substrates for Flexible Circuits
Investigator(s):Li W, Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:07/2018


Project Title:Environment-friendly and Cost-effective Imprinted Metallization on Polymeric Substrates for Flexible Circuits
Investigator(s):Li W, Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Postdoctoral Hub Programme for ITF projects
Start Date:09/2018


Project Title:Environment-friendly and Cost-effective Imprinted Metallization on Polymeric Substrates for Flexible Circuits
Investigator(s):Li W, Feng SPT
Department:Mechanical Engg
Source(s) of Funding:Postdoctoral Hub Programme for ITF projects
Start Date:09/2018


Project Title:Nanoscale Quantum Sensing Based on Optically Detected Magnetic Resonance Using Diamond Nitrogen-Vacancy Centers
Investigator(s):Li W, Chan BP, Cui X, Tang J, Tsia KKM, Huang M, Chen Y
Department:Mechanical Engg
Source(s) of Funding:Small Equipment Grant
Start Date:04/2019


Project Title:The 63rd International Conference On ELECTRON, ION, AND PHOTON BEAM TECHNOLOGY AND NANOFABRICATION; Metallic Nanostructures on Arbitrary Surfaces Fabricated by Solution-processed Nanopatterning and Nanotransfer Printing
Investigator(s):Li W
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:05/2019
Completion Date:05/2019


Project Title:Plasmonic Film for Structural Colorimetric Anti-Counterfeit
Investigator(s):Li W
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2019


Project Title:Cost-effective Fabrication of Skin-Attachable and Invisible Wearable Sensing System with Wireless Readout
Investigator(s):Li W
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:06/2019


Project Title:Scalable Deterministic Nanofabrication Platform for Bio-medical, Optoelectronic, and Energy Applications
Investigator(s):Li W, Feng SPT, Habimana O, Xie MH, Djurisic A, Choy WCH, Choi HW
Department:Mechanical Engg
Source(s) of Funding:Platform Technology Funding
Start Date:06/2019


List of Research Outputs

Cai J., Zhang M., Sun Z., Zhang C., Liang C., Khan A., Ning X.H., Ge H.X., Feng S.P.T. and Li W., Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics, Journal of Materials Chemistry C. 2019, 7(15): 4363-4373.
Cai J., Zhang C., Khan A., Wang L. and Li W., Selective Electroless Metallization of Micro-and Nanopatterns via Poly (dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications, ACS Applied Materials & Interfaces. 2018.
Fu X., Cai J., Zhang X., Li W., Ge H. and Hu Y., Top-down fabrication of shape-controlled, monodisperse nanoparticles for biomedical applications, Advanced drug delivery reviews. 2018.
Li W., Cost-effective and Scalable Manufacturing of Metal-mesh Transparent Electrodes for Flexible Applications , Chinese Materials Conference. 2018.
Li W., Interference Lithography and Nanoimprint Lithography for Nanooptic Devices over Wafer-scale Area, IEEE-NEMS, The 14th International Conference on Nano/Micro Engineered and Molecular Systems. 2019.
Liu C.H., Cheng W.C., LI W., MO Z., WU Z., Chan Y.L., Kwan W.K. and Yau H.T., Computational Fluid Dynamics Study of Wind Environment in Urban Areas, PRAGMA35; 3 to 6 October 2018; Penang, Malaysia. 2018.
SUN C., Cai J., Zhao K. and Li W., Best Invited Poster Award, The 63rd International Conference On Electron, Ion, and Photon Beam Technology and Nanofabrication. 2019.
Wu R., Ding Y., Yu K.M., Zhou K., ZHU Z., Ou X., Zhang Q., Zhuang M., Li W., Xu Z., Altman M.S. and Luo Z., Edge-Epitaxial Growth of Graphene on Cu with a Hydrogen-Free Approach, Chemistry of Materials. 2019, 31: 2555-2562.
Zhang C., Cai J., Liang C., Khan A. and Li W., Scalable Fabrication of Metallic Nanofiber Network via Templated Electrodeposition for Flexible Electronics, Advanced Functional Materials. 2019, 1903123.
Zhang L., Guo L., Shan X., Lin X., Gu T., Zhang J., Ge J., Li W., Ge H., Jiang Q. and Ning X., An elegant nitroreductase responsive fluorescent probe for selective detection of pathogenic Listeria in vitro and in vivo, Talanta. 2019, 198: 472-479.


Researcher : Li Y
Project Title:World Renewable Energy Congress VII Analysis and Design of Hybrid Ventilation and Cooling in Buildings
Investigator(s):Li Y
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:06/2002


Project Title:Full-scale study of air conditioning systems for SARS wards
Investigator(s):Li Y
Department:Mechanical Engg
Source(s) of Funding:Other Funding Scheme
Start Date:06/2006


Project Title:Healthy Buildings 2006 - Creating a Healthy Indoor Environment for People How Far Respiratory Droplets Move in Indoor Environments?
Investigator(s):Li Y
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:06/2006


Project Title:A 3D urban surface heat balance model for a complex high-rise compact urban canopy layer
Investigator(s):Li Y
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:Proximity effect - Exploring short-range and long-range airborne routes of expiratory exposure between people in indoor environment
Investigator(s):Li Y, Cowling BJ
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:10/2012


Project Title:Formation of droplet nuclei and airborne exposure in hospital wards
Investigator(s):Li Y, Cowling BJ
Department:Mechanical Engg
Source(s) of Funding:National Natural Science Foundation of China (NSFC) - General Program
Start Date:01/2013


Project Title:SmartComfort - Use of smartphone and cloud technologies for building thermal comfort, and ventilation and health studies in megacities
Investigator(s):Li Y
Department:Mechanical Engg
Source(s) of Funding:Microsoft Research Asia (MSRA) - General Award
Start Date:01/2014


Project Title:Outstanding Researcher Award 2013-14
Investigator(s):Li Y
Department:Mechanical Engg
Source(s) of Funding:Outstanding Researcher Award
Start Date:12/2014


Project Title:Effectiveness of building ventilation on reducing multi-route transmission of influenza in a large city
Investigator(s):Li Y, Wu JTK, Cowling BJ
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2015


Project Title:Logistic growth of the surface touch/contamination network in the built environment and its roles in disease spread
Investigator(s):Li Y, Cowling BJ
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2015


Project Title:Mechanisms of contact particle transfer between skin and fomite in the built environment
Investigator(s):Li Y, Zhang T, Lin Y, Yen H
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2017


Project Title:Environmental studies of the spread of respiratory viruses in a large dense urban social network
Investigator(s):Li Y, Cowling BJ, Huang M, Yen H, Chao YHC
Department:Mechanical Engg
Source(s) of Funding:Collaborative Research Fund (CRF) - Group Research Project
Start Date:06/2017


Project Title:Mobile LiDAR 3D wind profiler for urban boundary layer studies
Investigator(s):Li Y, Liu CH, Pan W, Ng TST, Webster CJ, Huang J, Tian L
Department:Mechanical Engg
Source(s) of Funding:Small Equipment Grant
Start Date:06/2017


Project Title:HeatDome: The effects of ideal city shape and city clusters on urban-like heat island circulation in a calm and stratified environment
Investigator(s):Li Y
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2017


Project Title:Understanding the mechanisms of mitigating extreme heat events by greening in Hong Kong
Investigator(s):Li Y
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:03/2018


Project Title:Understanding extreme heat events in and around a dense high-rise city
Investigator(s):Li Y
Department:Mechanical Engg
Source(s) of Funding:European Commission (EC)/Research Grants Council (RGC) Collaboration Scheme
Start Date:05/2018


Project Title:Synergistic effects of heat dome and foehn wind on extreme heat events in a dense high-rise city
Investigator(s):Li Y, Ren C
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


Project Title:Exploratory study of the use of wearable sensors and AI in exploring close contact behavior of people
Investigator(s):Li Y, Yen H
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2019


List of Research Outputs

Bard R.L., Ijaz M.K., Zhang J., Li Y., Bai C., Yang Y., Carcia W.D., Creek J. and Brook R.D., Interventions to Reduce Personal Exposures to Air Pollution, Global Heart. 2019, 14: 47-60.
Ching J., Aliaga D., Mills G., Masson V., See L., Neophytou M., Middel A., Baklanov A., Ren C., Ng E., Fung J., Wong M., Huang Y., Martilli A., Brousse O., Stewart I., Zhang X., Shehata A., Miao S., Wang X., Wang W., Yamagata Y., Duarte D., Li Y., Feddema J., Bechtel B., Hidalgo J., Roustan Y., Kim Y., Simon H., Kropp T., Bruse M., Lindberg F., Grimmond S., Demuzure M., Chen F., Li C., Gonzales-Cruz J., Bornstein B., He Q., Lin T., Hanna A., Erell E., Tapper N., Mall R. and Niyogi D., Pathway using WUDAPT's Digital Synthetic City tool towards generating urban canopy parameters for multi-scale urban atmospheric modeling, Urban Climate. 2019, 28: 100459.
Deng Q., Ou C., Shen Y.M., Xiang Y., Miao Y. and Li Y., Health effects of physical activity as predicted by particle deposition in the human respiratory tract, Science of The Total Environment. 2019, 657: 819-826.
Deng Q., Deng L., Lu C., Li Y. and Norbäck D., Parental stress and air pollution increase childhood asthma in China, Environmental Research. 2018, 165: 23-31.
Deng Q., Deng L., Miao Y., Guo X. and Li Y., Particle deposition in the human lung: Health implications of particulate matter from different sources, Environmental Research. 2019, 169: 237-245.
Duan S., Luo Z., Yang X. and Li Y., The impact of building operations on urban heat/cool islands under urban densification: A comparison between naturally-ventilated and air-conditioned buildings, Applied Energy. 2019, 235: 129-138.
FAN Y., Hunt J., YIN S. and Li Y., Mean shear flow in recirculating turbulent urban convection and the plume-puff eddy structure below stably stratified inversion layers, Theoretical and Applied Climatology. 2019, 135: 1485-1499.
Fan Y., Li Y. and Yin S., Non-uniform ground-level wind patterns in a heat dome over a uniformly heated non-circular city, International Journal of Heat and Mass Transfer. 2018, 124: 233-246.
LEI H., Tang J.W. and Li Y., Transmission routes of influenza A(H1N1)pdm09: analyses of inflight outbreaks, Epidemiology and Infection. 2018, 146: 1731-1739.
LI Y., Deformation Mechanisms of Advanced Structural Alloys: from Single-phase Alloys to Metal-matrix Composite, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-166.
LI Y., Investigation of Particle Jamming for Compliant Robotic Arm and Soft Robotics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-169.
LI Y., Chen Y.H. and LI Y., Pre-charged pneumatic soft gripper with close loop control, In: IEEE Robotics and Automation Letters, IEEE Robotics and Automation Letters. 2019.
LI Y. and Huang M., Revealing the interfacial plasticity and shear strength of a TiB2-strengthened high-modulus low-density steel, Journal of the Mechanics and Physics of Solids. 2018, 121: 313-327.
LI Y., Chen Y.H., YANG Y. and LI Y., Soft Robotic Grippers Based on Particle Transmission, IEEE/ASME Transaction on Mechatronics.. 2019.
Leung N.H.L., Chan K.H., Chu K.W., Shiu E.Y.C., Hau B.J.P., Mcdevitt J.J., Yen H., Li Y., Ip D.K.M., Leung G.M., Peiris J.S.M., Seto W.H., Milton D.K. and Cowling B.J., Best Abstract in Category 'Infection Control', 17th Asia-Pacific Congress of Clinical Microbiology and Infection cum 8th International Infection Control Conference, Hong Kong Society for Microbiology and Infection Hong Kong Infection Control Nurses’ Association. 2018.
Leung N.H.L., Chan K.H., Chu K.W., SHIU E.Y.C., Hau J.P.B., Mcdevitt J.J., Yen H., Li Y., Ip D.K.M., Leung G.M., Peiris J.S.M., Seto W.H., Milton D.K. and Cowling B.J., Shedding and efficacy of face masks in reducing release of respiratory viruses in human exhaled breath, 17th Asia-Pacific Congress of Clinical Microbiology and Infection cum 8th International Infection Control Conference. 2018.
Li Y., Exploring physics of city ventilation and thermal climate by simulation, The 4th Asia Conference of International Building Performance Simulation Association - ASim2018, 3-5 December, 2018, Hong Kong. 2018.
Li Y., Heat dome and urban warming, International workshop on “Wind Effects on Buildings and Urban Environment”, 10-12 March, 2019, Tokyo.. 2019.
Li Y., Keynote speaker, ” Wind weakening, heat dome and urban warming”, The 2nd International Conference of IASUR “Green Building and Smart City”, Xi-An, China, March 29-31, 2019. 2019.
Li Y., Plenary speech, “How do close contact transmit respiratory infection?”, 第九届中国环境科学学会室内环境与健康分会学术年会暨第四届生物气溶胶国际研讨会. 中国,南京, 2019年5月10-12日.. 2019.
Li Y., The physics in natural ventilation of cities and buildings, The 7th Conference of the International Association of Building Physics, 23-26 September 2018, Syracuse, USA . 2018.
Li Y., Weak winds in buildings and cities, The Asian Built-Environment Leaders Envision (ALBE) Forum 2018, Oct 14-15 2018, Yonsei University, Seoul. 2018.
Li Y., [10] Invited speaker, A mechanism-based modelling study of probable transmission routes of MERS-CoV in a hospital outbreak, Centennial reospect: 3rd International Forum on Influenza Virus & Other Respiratory Viruses, Guangzhou, September 7-9, 2018, Guangzhou, China. 2018.
Mei S.J., Hu J.T., Liu D., Zhao F.Y., Li Y. and Wang H.Q., Airborne pollutant dilution inside the deep street canyons subjecting to thermal buoyancy driven flows: Effects of representative urban skylines, Building and Environment. 2019, 149: 592-606.
WANG K., Li Y., Luo Z., Yin S. and Chan P.W., Harmonic analysis of 130-year hourly air temperature in Hong Kong: detecting urban warming from the perspective of annual and daily cycles, Climate Dynamics. 2018, 51: 613-625.
WANG Q., WANG Y., FAN Y., Hang J. and Li Y., Urban heat island circulations of an idealized circular city as affected by background wind speed, Building and Environment. 2019, 148: 433-447.
Wang K., Li Y., LI Y. and Lin B., Stone forest as a small-scale field model for the study of urban climate, International Journal of Climatology. 2018, 38: 3723-3731.
Wang X., Li Y., Yang X., Chan P., Nichol J. and Li Q., The Street Air Warming Phenomenon in a High-Rise Compact City, Atmosphere. 2018, 9: 402.
Wei J., ZHOU J., Liu Y., Wu J., Jin T., Li Y. and Yen H., A novel partial lid for mechanical defeatherers reduced aerosol dispersion during processing of avian influenza virus infected poultry, PLoS One. 2019, 14(5): e0216478.
Wong C.T., Leung W.T., Fu S.C., Li Y., Law A.K.Y. and Chao Y.H.C., Effect of surface roughness on droplet resuspension behavior, 15th International Conference on Indoor Air Quality and Climate, Indoor Air 2018. USA, paper ID 266.
XIAO S., Tang J.W., Hui D.S., Lei H., Yu H. and Li Y., Probable transmission routes of the influenza virus in a nosocomial outbreak, Epidemiology and Infection. 2018, 146: 1114-1122.
Xie C., Lau E.H.Y., Yoshida T., Yu H., Wang X., Wu H., Wei J., Cowling B.J., Peiris J.S.M., Li Y. and Yen H., Detection of influenza and other respiratory viruses in air sampled from a university campus: a longitudinal study, Clin Infect Dis. 2019.
Xu J.C., Fu S.C., Tso C.Y., Wu C.L., Li Y. and Chao Y.H.C., The impact of sinusoidal airflow produced by personalized ventilation on distribution of airborne droplets, 15th International Conference on Indoor Air Quality and Climate, Indoor Air 2018. USA, paper ID 267.
YIN S., Li Y., FAN Y. and Sandberg M., Experimental investigation of near-field stream-wise flow development and spatial structure in triple buoyant plumes, Building and Environment. 2019, 149: 79-89.
Yin S., Li Y., Fan Y. and Sandberg M., Unsteady large-scale flow patterns and dynamic vortex movement in near-field triple buoyant plumes, Building and Environment. 2018, 142: 288-300.
Zhang D.D., Cai Y., Liu D., Zhao F.Y. and Li Y., Dual steady flow solutions of heat and pollutant removal from a slot ventilated welding enclosure containing a bottom heating source, International Journal of Heat and Mass Transfer. 2019, 132: 11-24.
Zhao P., Li Y., Tsang T.L. and Chan P.T., Equilibrium of particle distribution on surfaces due to touch, Building and Environment. 2018, 143: 461-472.
Zhong H.Y., Zhang D.D., Liu D., Zhao F.Y., Li Y. and Wang H.Q., Two-dimensional numerical simulation of wind driven ventilation across a building enclosure with two free apertures on the rear side: Vortex shedding and “pumping flow mechanism”, Journal of Wind Engineering and Industrial Aerodynamics . 2018, 179: 449-462.
van Hooff T., Nielsen P.V. and Li Y., Computational fluid dynamics predictions of non-isothermal ventilation flow-How can the user factor be minimized?, Indoor Air. 2018, 28: 866-880.


Researcher : Liang C
List of Research Outputs

Cai J., Zhang M., Sun Z., Zhang C., Liang C., Khan A., Ning X.H., Ge H.X., Feng S.P.T. and Li W., Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics, Journal of Materials Chemistry C. 2019, 7(15): 4363-4373.
Zhang C., Cai J., Liang C., Khan A. and Li W., Scalable Fabrication of Metallic Nanofiber Network via Templated Electrodeposition for Flexible Electronics, Advanced Functional Materials. 2019, 1903123.


Researcher : Lin Y
Project Title:A theoretical and experimental investigation of actin-based motility
Investigator(s):Lin Y, Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:10/2010


Project Title:Stretch-induced Cell Alignment – An Ideal Phenomenon for Investigating Mechanotransduction
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:Investigating the mechanical response of physiologically relevant actin networks through a combined computational and experimental approach
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2012


Project Title:Connecting the adhesion and mechanical response of neurons with Alzheimer's disease through a combined experimental and modeling study
Investigator(s):Lin Y, Chang RCC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2013


Project Title:Pressure-induced changes in the biological and mechanical behavior of chronic myeloid leukemia cells
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:12/2014


Project Title:A platform for fast and accurate drug-resistance identification of cancer cells
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Support Programme (Tier 3)
Start Date:12/2015


Project Title:Directing the ion transport activity and death of living cells via imposed volume changes
Investigator(s):Lin Y, Yip TCT
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:12/2015


Project Title:An investigation of the mechanics of bio-filament networks: micro-architecture and response
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:National Natural Science Foundation of China (NSFC) - General Program
Start Date:01/2016


Project Title:A Platform for Fast and Accurate Drug-resistance Identification of Cancer Cells
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:04/2016


Project Title:A Platform for Fast and Accurate Drug-resistance Identification of Cancer Cells
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:05/2016


Project Title:HKU Overseas Fellowship Awards 2016-17
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:HKU Overseas Fellowship Awards
Start Date:06/2016


Project Title:A combined experimental and theoretical investigation on the AQP-dependent volumetric response and motility of lung and nasopharyngeal cancer cells
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2017


Project Title:Growth of tumor cells in a partially confined microenvironment
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2017
Completion Date:05/2019


Project Title:Correlating the epithelial-mesenchymal (EMT) transition in cancer cells with their abnormal shape/height fluctuations
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2018


Project Title:A combined experimental and modeling investigation on the regulation of extracellular matrix viscosity on the adhesion and spreading of cells
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


Project Title:Investigating the adhesion and AQP-regulated migration capability of cancer cells in a confined environment
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2019


Project Title:The 10th International Conference on Materials for Advanced Technologies; Adhesion and Tension Regulated Retraction of Injured Axons
Investigator(s):Lin Y
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:06/2019


List of Research Outputs

Cao Y., WEI X., Lin Y. and Sun F., Synthesis of bio-inspired viscoelastic molecular networks by metal-induced protein assembly, Molecular Systems Design & Engineering. 2019, . DOI: 10.1039/C9ME00027E.
FANG C., HUI T.H., WEI X., YAN Z., Qian J. and Lin Y., Interaction and fusion dynamics between cellular blebs, Journal of Biomechanics. 2018, 81: 113-121.
GONG Z., FANG C., You R., SHAO X., WEI X., Chang R.C.C. and Lin Y., Distinct Relaxation Timescales of Neurites Revealed by Rate-dependent Indentation, Relaxation and Micro-rheology Tests, Soft Matter. 2019, 15: 166-174.
Gong B., Lin J., WEI X., Qian J. and Lin Y., Cross-linked biopolymer networks with active motors: Mechanical response and intra-network transport, Journal of the Mechanics and Physics of Solids. 2019, 127: 80-93.
Gong B., WEI X., Qian J. and Lin Y., Modeling and Simulations of the Dynamic Behaviors of Actin-Based Cytoskeletal Networks, ACS Biomaterials Science & Engineering. 2019, 5: 3720-3734.
Hui T.H.K., Cho W.C., Fong H.W., Yu M., Kwan K.W., Ngan K.C., Wong K.H., Tan Y., Yao S., Jiang H., Gu Z. and Lin Y., An electro-osmotic microfluidic system to characterize cancer cell migration under confinement, Journal of The Royal Society Interface. 2019, 16: 20190062.
SHAO X., You R., HUI T.H., FANG C., GONG Z., YAN Z., Chang R.C.C., Shenoy V.B. and Lin Y., Tension- and Adhesion-Regulated Retraction of Injured Axons, Biophysical Journal. 2019, 117: 193-202.
WEI X., WEN P. and Lin Y., Continuum-Level Simulations of Biopolymer Networks: A Minireview, Current Trends in Biomedical Engineering & Biosciences. 2019, 19: 556005.


Researcher : Liu C
List of Research Outputs

CHEN J., Liu C., Huang Y.T., Lee H. and Feng S.P.T., Study of the growth mechanisms of nanoporous Ag flowers for non-enzymatic glucose detection, Nanotechnology. 2018, 29: 505501.
LIU C., Crystal Engineering Using Electrochemical Approach: Mechanism and Applications, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-135.
LIU C., Li X., Xu F., Cong H., Li Z., Song Y. and Wang M., Spatio-temporal release of NGF and GDNF from multi-layered nanofibrous bicomponent electrospun scaffolds, Journal of Materials Science: Materials in Medicine. Netherlands, Springer, 2018, 29(7): pp.13.
Li X.H., Liu C., Feng S.P.T. and Fang N.X.L., Broadband Light Management with Thermochromic Hydrogel Microparticles for Smart Windows, Joule. 2019, 3: 290-302.


Researcher : Liu CH
Project Title:LESChem: Large-Eddy Simulation and Wind Tunnel Experiments for the Transport of Chemically Reactive Air Pollutants in Urban Canopies
Investigator(s):Liu CH, Lam KM
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2010


Project Title:LESThermoChem: Large-Eddy Simulation of Chemically Reactive Pollutant Transport in Street Canyons and the Urban Boundary Layer under Thermal Stratification
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2012


Project Title:LES-SVOC: Large-Eddy Simulation of Semi-volatile Organic Compound Transport in the Urban Boundary Layer
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2013


Project Title:On Plume Meandering over Roughness Elements: A Theory of Chemically Reactive Pollutant Dispersion in Urban Areas with Thermal Stratification
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2014


Project Title:On Plume Dispersion over Roughness Elements: a Theoretical Study of Atmospheric Pollutant Transport in Stratification over Urban Areas using Open-Channel Flows
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2015


Project Title:Plume Dispersion in Turbulent Jets: A Theoretical Study of Pollutant Transport, Chemistry and Source Apportionment for Vehicular Tailpipe Exhaust in Urban Areas
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2016


Project Title:LESChem for Flows over Surface Discontinuities: a Theoretical Study of Reactive Plume Dispersion after an Abrupt Change in Urban Morphology
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2017


Project Title:Reactive Plume Rise: A Single-Layer Theoretical Model for the Physics-Chemistry Coupling of Near-Field Pollutant Dispersion
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2017


Project Title:Roughness Sublayer Dynamics: a Theoretical Study of Near-Field Plume Rise/Dispersion over Urban Areas
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2018


Project Title:Photochemical air pollution in highly urbanized subtropical regions: from micro environments to urban-terrestrial-oceanic interactions
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:Theme-based Research Scheme
Start Date:01/2018


Project Title:19th International Conference on Harmonisation within Atmospheric Dispersion Modelling for Regulatory Purposes; Flows over Urban Areas - a Complementary Study of Computational Fluid Dynamics and Wind Tunnel Experiments
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:06/2019


Project Title:Next-Generation Air Pollution Physics and Chemistry Model for Urban Areas
Investigator(s):Liu CH
Department:Mechanical Engg
Source(s) of Funding:Collaborative Research Fund (CRF) - Group Research Project
Start Date:06/2019


List of Research Outputs

Liu C.H., Cheng W.C., LI W., MO Z., WU Z., Chan Y.L., Kwan W.K. and Yau H.T., Computational Fluid Dynamics Study of Wind Environment in Urban Areas, PRAGMA35; 3 to 6 October 2018; Penang, Malaysia. 2018.
Liu C.H., MO Z. and WU Z., Parameterization of vertical dispersion coefficient over idealized rough surfaces in isothermal conditions, Geoscience Letters. Springer, 2018, 5: 1-11.
MO Z. and Liu C.H., A Wind Tunnel Study of Plume Dispersion & its Mechanism over Hypothetical Urban Roughness, 10th International Conference on Urban Climate/14th Symposium on the Urban Environment; 6 to10 August 2018; New York, NY. 2018.
WU Z. and Liu C.H., Budget analysis for reactive plume transport over idealised urban areas, Geoscience Letters. Springer, 2018, 5: 1-7.
WU Z. and Liu C.H., Budget analysis of pollutant transport over urban roughness, ICUC10; August 6 to 10, 2018; New York, NY, USA. 2018.
WU Z. and Liu C.H., Source depletion analogy for reactive plume dispersion over schematic urban areas, Atmospheric Environment. Elsevier, 2018, 190: 226-231.


Researcher : Liu F
Project Title:High-quality polycrystalline-silicon thin films for solar cells via novel approaches
Investigator(s):Liu F
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:New Fuel Cells Based on LEDs
Investigator(s):Liu F
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:01/2013




Researcher : Liu M
List of Research Outputs

Liu M., Lam J., ZHU B. and Kwok K.W., On Positive Realness, Negative Imaginariness, and H∞ Control of State-space Symmetric Systems, Automatica. England, Pergamon-elsevier Science Ltd, 2019, 101: 190-196.


Researcher : Liu Z
List of Research Outputs

Liu Z., ZHANG Y., Yang T., Wang Z. and Shum H.C., Compressed liquid marble ruptures at edge , Applied Physics Letters. American Institute of Physics (AIP), 2019, 114: 243701.
Liu Z., Yang T., Huang Y., Liu Y., Chen L., Deng L., Shum H.C. and Kong T., Electrocontrolled Liquid Marbles for Rapid Miniaturized Organic Reactions, Advanced Functional Materials. Wiley, 2019, 29: 1901101.
ZHOU J., YI J., CHEN X., Liu Z. and Wang Z., BCL-13: A 13-DOF Soft Robotic Hand for Dexterous Grasping and In-Hand Manipulation, IEEE Robotics and Automation Letters. 2018, 3: 3379-3386.


Researcher : Lu J
Project Title:Pore-scale modeling and simulation on the electro-kinetic flow in nanoporous media
Investigator(s):Lu J, Ng CO
Department:Mechanical Engg
Source(s) of Funding:Small Project Funding
Start Date:04/2014




Researcher : MA C
List of Research Outputs

MA C., On Robust Adaptive Control of Robots and Unmanned Aerial Vehicles, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-175.


Researcher : MA Q
List of Research Outputs

Deng Y., MA Q., YUAN H., Lum G. and Shum H.C., Development of dual-component protein microparticles in all-aqueous systems for biomedical applications, Journal of Materials Chemistry B. Royal Society of Chemistry (RSC), 2019, 19: 3059-3065.


Researcher : MAK SY
List of Research Outputs

CHAO Y., MAK S.Y., Rahman S., ZHU S. and Shum H.C., Generation of High‐Order All‐Aqueous Emulsion Drops by Osmosis‐Driven Phase Separation, Small. Wiley, 2018, 14: 1802107.
Jeyhani M., Mak S.Y., Sammut S., Shum H.C., Hwang D.K. and Tsai S.S.H., Controlled Electrospray Generation of Nonspherical Alginate Microparticles, Chemphyschem. 2018, 19(16): 2113-2118.


Researcher : MAO J
List of Research Outputs

MAO J. and Chen Y., Ground-state crystal structures of superconducting Nb3Al and the phase transformation under high pressures, J. Appl. Phys.. 2018, 124: 173902.
Zhang X., Li J., Wang X., Chen Z., MAO J., Chen Y. and Pei Y., Vacancy manipulation for thermoelectric enhancements in GeTe alloys, J. Am. Chem. Soc.. 2018, 140: 15883.


Researcher : MO Z
List of Research Outputs

Liu C.H., Cheng W.C., LI W., MO Z., WU Z., Chan Y.L., Kwan W.K. and Yau H.T., Computational Fluid Dynamics Study of Wind Environment in Urban Areas, PRAGMA35; 3 to 6 October 2018; Penang, Malaysia. 2018.
Liu C.H., MO Z. and WU Z., Parameterization of vertical dispersion coefficient over idealized rough surfaces in isothermal conditions, Geoscience Letters. Springer, 2018, 5: 1-11.
MO Z. and Liu C.H., A Wind Tunnel Study of Plume Dispersion & its Mechanism over Hypothetical Urban Roughness, 10th International Conference on Urban Climate/14th Symposium on the Urban Environment; 6 to10 August 2018; New York, NY. 2018.


Researcher : Mak SY
List of Research Outputs

CHAO Y., MAK S.Y., Rahman S., ZHU S. and Shum H.C., Generation of High‐Order All‐Aqueous Emulsion Drops by Osmosis‐Driven Phase Separation, Small. Wiley, 2018, 14: 1802107.
Jeyhani M., Mak S.Y., Sammut S., Shum H.C., Hwang D.K. and Tsai S.S.H., Controlled Electrospray Generation of Nonspherical Alginate Microparticles, Chemphyschem. 2018, 19(16): 2113-2118.


Researcher : Meng M
List of Research Outputs

Meng M., Lam J., Feng J. and Cheung K.C., Stability and Guaranteed Cost Analysis of Time-Triggered Boolean Networks, IEEE Transactions on Neural Networks and Learning Systems. USA, IEEE-Inst Electrical Electronics Engineers Inc, 2018, 29: 3893-3899.


Researcher : Nan L
List of Research Outputs

FRASER L.A., Cheung Y.W., Kinghorn A.B., Guo W., SHIU C.C., JINATA C., LONG F., BHUYAN S.K., Nan L., Shum H.C. and Tanner J.A., Microfluidic Technology for Nucleic Acid Aptamer Evolution and Application, Advanced Biosystems. 2019, 3: 1900012.


Researcher : Ng CO
Project Title:A homogenization-based model for roughness-induced apparent slip
Investigator(s):Ng CO
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2010


Project Title:Electrohydrodynamic slip flow through a channel with micropatterned surfaces
Investigator(s):Ng CO
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2011


Project Title:Effective Slip for Flow Through a Channel Bounded by Slippery Liquid-Infused Porous Surfaces (SLIPS)
Investigator(s):Ng CO
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2016


List of Research Outputs

Behera H., Ng C.O. and Sahoo T., Oblique wave scattering by a floating elastic plate over a porous bed in single and two-layer fluid systems, Ocean Engineering. 2018, 159: 280-294.
Ng C.O. and XIE W., End loss for Stokes flow through a slippery circular pore in a barrier of finite thickness, Physics of Fluids. AIP, 2018, 30: 103604.
Ng C.O. and Wang C.Y., Starting Poiseuille flow in a circular tube with two immiscible fluids, Journal of Fluids Engineering. ASME, 2018, 141(3): 031201.


Researcher : Ng JKT
List of Research Outputs

Gupta S., Ng J.K.T., SHEN Z. and Wang Z., Development of High Performance Mechanical Robotic Fish, Advanced Maritime Engineering Conference (PAAMES/AMEC 2018). 2018, 1-7.


Researcher : Ngan AHW
Project Title:Stress-exponent measurement of nano-grained thin-films by nanoindentation
Investigator(s):Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:09/2002


Project Title:Statistical distribution, size and time dependence of initial yield strength in submicron crystals
Investigator(s):Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:09/2006


Project Title:Outstanding Researcher Award 2006-2007
Investigator(s):Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:Outstanding Researcher Award
Start Date:11/2007


Project Title:Ultra-high Strength Micro-sized Materials
Investigator(s):Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:10/2010


Project Title:Anodized Aluminium Oxide Nano-honeycomb with Selective Spatial Ordering of Pore Channels by Substrate Conditioning - Theory and Experiment
Investigator(s):Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:Novel actuating behaviour of nanoporous oxide-on-metal hybrid materials
Investigator(s):Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:09/2014


Project Title:Metallurgical fundamentals of metals manufactured by 3D printing involving the SLS process - electron microscopy, nanomechanical characterization and multi-scale/physics modeling
Investigator(s):Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:03/2017
Completion Date:08/2018


Project Title:A new type of low-cost, high-performance actuating materials based on nickel-hydroxide/oxyhydroxide: establishing the processing, microstructure and performance relation for device design and fabrication
Investigator(s):Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research for Resubmission of GRF/ECS Proposals
Start Date:07/2018
Completion Date:11/2018


Project Title:MRS 2019 Spring Meeting; Nano-Chemomechanics at Play—Novel Nickel-Hydroxide Thin-Film Actuating Materials for Micro-Robotics Applications
Investigator(s):Ngan AHW
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:04/2019
Completion Date:04/2019


List of Research Outputs

Aifantis K.E., Shrivastava S., Pelidou S.-.H., Ngan A.H.W. and Baloyannis S., Relating the blood-thinning effect of pentoxifylline to the reduction in the elastic modulus of human red blood cells: an in vivo study, Biomaterials Science. Royal Society of Chemistry, 2019, 7: 2545-2551.
Fan H., Ngan A.H.W., GAN K. and El-Awady J.A., Origin of double-peak precipitation hardening in metallic alloys, International Journal of Plasticity. Elsevier, 2018, 111: 152-167.
Ngan A.H.W., Zhou Z., SUN X. and Tang B., Invited talk, “Indentation of ultra-soft materials: pico-indentation of non-adherent cells in the Pa-modulus range”, 6th International Indentation Workshop (IIW6), July 1-6, 2018, Sapporo, Japan., 2018.
Ngan A.H.W., Nano-chemomechanics at play: novel nickel-hydroxide thin-film actuating materials for micro-robotic applications, Invited talk at Symposium CP01: Plasticity and Fracture at the Nanoscales, Materials Research Society 2019 Spring Meeting, April 22-26, 2019, Phoenix, USA.. 2019.
Ngan A.H.W., WANG P. and Kwan K.W., Patterned printing of ceramics by electrodeposition, and applications in micro-robotics, Invited talk, Electrochemical Society 2018 Fall Meeting, Sept. 30 – Oct. 4, 2018, Cancun, Mexico.. 2018.
Siu K.W., Liu H. and Ngan A.H.W., A universal law for metallurgical effects on acoustoplasticity, Materialia. Elsevier, 2019, 5: 100214.
Siu K.W. and Ngan A.H.W., Relation between yield stress and Peierls stress, Physica Status Solidi b. Wiley, 2019, 256: 1900107.
ZHANG Y. and Ngan A.H.W., Extracting dislocation microstructures by deep learning , International Journal of Plasticity. 2019, 115: 18-28.
Zhao X.X., Wu J., Chiu Y.L., Jones I.P., Gu R. and Ngan A.H.W., Critical dimension for the dislocation structure in deformed copper micropillars, Scripta Materialia. Elsevier, 2019, 163: 137-141.


Researcher : PAN Q
List of Research Outputs

PAN Q., CHUNG W.C. and Chow K.W., The coupled Hirota system as an example displaying discrete breathers: Rogue waves, modulation instability and varying cross-phase modulations, AIP Advances. USA, AMER Inst Physics, 2018, 8(9): 095303-15.


Researcher : PAN W
List of Research Outputs

PAN W., Wang Y., KWOK Y.H. and Leung Y.C.D., A low-cost portable cotton-based aluminum-air battery with high specific energy, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 179-185.
WU M., ZHANG Y., Szeto W., PAN W., Huang H.B. and Leung Y.C.D., Vacuum ultraviolet (VUV)-based photocatalytic oxidation for toluene degradation over pure CeO2, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 200: 203-213.
Wang Y., KWOK Y.H., ZHANG Y., PAN W. and Leung Y.C.D., Flexible hydrogen fuel cell fabricated on paper with embedded aluminium foil, Proceeding of the International Symposium on Hydrogen Energy & Energy Technologies (HEET2018). Japan, 2019, E3S Web of Conference 83,01004 (2019): pp.8.
Wang Y., KWOK Y.H., PAN W., Zhang H.M. and Leung Y.C.D., Innovative paper-based Al-air batteries as a low-cost and green energy technology for the miniwatt market, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 414: 278-282.
Wang Y., PAN W., KWOK Y.H., Lu X. and Leung Y.C.D., Low-cost Al-air batteries with paper-based solid electrolyte, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 522-527.


Researcher : PEI K
List of Research Outputs

PEI K., Physics of Organic Field-Effect Transistors and Related Optical Applications, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-184.


Researcher : PENG L
List of Research Outputs

PENG L., Modelling the Wind Environment in Idealized and Realistic Urban Areas, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-162.


Researcher : Peng B
List of Research Outputs

Borchert J., Peng B., Letzkus F., Burghartz J., Chan K.L., Zojer K.L., Ledwigs S. and Klauk H., Small contact resistance and high-frequency operation of flexible low-voltage inverted coplanar organic transistors, Nature Communications. Springer Nature Publishing, 2019, 10.


Researcher : Puchakayala S
List of Research Outputs

Puchakayala S. and Feng S.P.T., High-index facet defined shape-controlled electrochemical synthesis of nanocrystals: A mini review, Electrochemistry Communications. 2018, 94: 64-69.


Researcher : SHAO X
List of Research Outputs

GONG Z., FANG C., You R., SHAO X., WEI X., Chang R.C.C. and Lin Y., Distinct Relaxation Timescales of Neurites Revealed by Rate-dependent Indentation, Relaxation and Micro-rheology Tests, Soft Matter. 2019, 15: 166-174.
SHAO X., You R., HUI T.H., FANG C., GONG Z., YAN Z., Chang R.C.C., Shenoy V.B. and Lin Y., Tension- and Adhesion-Regulated Retraction of Injured Axons, Biophysical Journal. 2019, 117: 193-202.


Researcher : SHEN Z
List of Research Outputs

Gupta S., Ng J.K.T., SHEN Z. and Wang Z., Development of High Performance Mechanical Robotic Fish, Advanced Maritime Engineering Conference (PAAMES/AMEC 2018). 2018, 1-7.
LI J., SHEN Z., Xu W.Y.T., Lam Y.H.W., Hsung R.T.C., Pow E.H.N., Kosuge K. and Wang Z., A Compact Dental Robotic System Using Soft Bracing Technique, IEEE Robotics and Automation Letters. 2019, 4: 1271 - 1278.
ZHANG R., SHEN Z. and Wang Z., Ostraciiform Underwater Robot With Segmented Caudal Fin, IEEE Robotics and Automation Letters. 2018, 3: 2902-2909.


Researcher : SUN C
List of Research Outputs

SUN C., Cai J., Zhao K. and Li W., Best Invited Poster Award, The 63rd International Conference On Electron, Ion, and Photon Beam Technology and Nanofabrication. 2019.


Researcher : SUN H
List of Research Outputs

LI H., SUN H. and Wang M., Nanofibrous scaffolds with both MSC-laden cell fibers and growth factor-loaded fibers for tissue regeneration, Materials Research Society Fall Meeting. Boston, USA, 2018, 1 pp.
LI J., SUN H. and Wang M., A novel facile method for bijels fabrication, 2019 Spring Meeting of the European Materials Research Society (E-MRS). Nice, France, 2019, 1 pp.
LI J., SUN H. and Wang M., Bijels-derived hybrid hydrogel membranes as delivery vehicles for the controlled release of bio-agents, HKU-Osaka University Joint Symposium on Materials Research. Osaka, Japan, 2018, 1 pp.
LI J., SUN H., Haase M.F. and Wang M., Fabrication and characteristics of bijels-derived hybrid hydrogel membranes for anticancer drug delivery, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
SUN H., Best Poster Award, European Materials Research Society (E-MRS) 2019 Spring Meeting. Nice, France, 2019.
SUN H. and Wang M., Cell proliferation and migration in bicontinuous bijels-derived hybrid hydrogel membranes, 2019 Spring Meeting of the European Materials Research Society (E-MRS). Nice, France, 2019, 1 pp.
SUN H. and Wang M., Delivery of growth factors via bijels-derived hybrid hydrogels, Materials Research Society Fall Meeting. Boston, USA, 2018, 1 pp.
SUN H. and Wang M., Fabrication of biocompatible bijels-derived hybrid hydrogel membranes for growth factor delivery, Materials Science & Technology 2018 Conference & Exhibition. Columbus, USA, 2018, 1 pp.
Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
Wang M., Guo L. and SUN H., Manufacturing technologies for biomaterials, In: Chief Editor: Roger J. Narayan, Encyclopedia of Biomedical Engineering. The Netherlands, Elsevier, 2019, 1: 116-134.
Wu J., SUN H., GUO L. and Wang M., Continuous wet spinning and dug-loaded wet-spun fibers, 43rd International Conference and Exposition on Advanced Ceramics and Composites (ICACC’19). Daytona Beach, USA, 2019, 1 pp.


Researcher : SUN X
List of Research Outputs

Ngan A.H.W., Zhou Z., SUN X. and Tang B., Invited talk, “Indentation of ultra-soft materials: pico-indentation of non-adherent cells in the Pa-modulus range”, 6th International Indentation Workshop (IIW6), July 1-6, 2018, Sapporo, Japan., 2018.


Researcher : Shabayek AAE
Project Title:11th International Association of Management of Technology Conference (IAMOT) Government's Support for Small & Medium Enterprises (SMEs) for Prospering Hong Kong Economy: Impacts of Globalization & China Joining WTO
Investigator(s):Shabayek AAE
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:03/2002




Researcher : Shu J
Project Title:The Fourth International Conference on Hydrodynamics Impact of Breaking Wave on a Wall
Investigator(s):Shu J
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:09/2000


Project Title:International Conference on Applied Mathematics The Additivity of the Soliton Equation and Exact N-Envelope-Soliton Solutions of the Hirota Equation
Investigator(s):Shu J
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:09/2000




Researcher : Shum HC
Project Title:Formation and mechanics of hierarchically structured soft particles by phase separation in confined droplets
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:NWO / RGC Joint Research Scheme - Travel Grants
Start Date:07/2011


Project Title:Green Droplet Microfluidics
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:Electro-microfluidics: towards controlled emulsions and emulsion-templated materials down to micron- and submicron-size range
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:12/2013


Project Title:A Novel Rinsing Agent for Preventing the Postoperative Complications due to Emulsification of Silicone-oil-based Vitreous Substitute
Investigator(s):Shum HC, Wong DSH, Chan YK
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:01/2014


Project Title:A Novel Rinsing Agent for Preventing the Postoperative Complications due to Emulsification of Silicone-oil-based Vitreous Substitute
Investigator(s):Shum HC, Wong DSH, Chan YK
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:01/2014


Project Title:A Novel Rinsing Agent for Preventing the Postoperative Complications due to Emulsification of Silicone-oil-based Vitreous Substitute
Investigator(s):Shum HC, Wong DSH, Chan YK
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Fund Internship Programme
Start Date:09/2014


Project Title:Electrical-Charging-based Characterization (EC-Characterization) of Emulsions Stabilized by Amphiphiles
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2014
Completion Date:04/2019


Project Title:Osmotic effect in droplet formation--based on aqueous two-phase microfluidics
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:National Natural Science Foundation of China (NSFC) - General Program
Start Date:01/2015


Project Title:Dynamics of Soft Matter at Interfaces: Theory, simulations and experiments
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Collaborative Research Fund (CRF) - Group Research Project
Start Date:04/2015


Project Title:Electro-microfluidic-extrusion (EME) of Viscous Liquid Jets
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2015


Project Title:Incorporation of perturbations to nozzles for dispensing in electronic packaging industry
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:02/2016


Project Title:An in vitro micro-fluidic device to screen silicone oil tamponades based on resistance against shear emulsification in eye
Investigator(s):Shum HC, Lai JSM, Wong DSH, Shih KC, Chan YK
Department:Mechanical Engg
Source(s) of Funding:Health and Medical Research Fund - Full Grant
Start Date:04/2016


Project Title:Next-generation High Throughput Diagnostics-on-a-chip System Based on Droplet Microfluidics
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Guangdong-Hong Kong Technology Cooperation Funding Scheme
Start Date:09/2016


Project Title:Electrical manipulation of liquid marbles towards digital electro-microfluidics (DEM)
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2016


Project Title:A scalable platform for fabricating all-aqueous emulsions via drops spreading on an aqueous substrate
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2017
Completion Date:04/2019


Project Title:Droplet-microfluidics platform for translational research in biomedical diagnostics
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Platform Technology Funding
Start Date:06/2017
Completion Date:06/2019


Project Title:Budding-like division induced by Proteins in All-aqueous Droplets (PAD)- towards self-replication
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:11/2017


Project Title:Research Output Prize (Faculty of Engineering)
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Research Output Prize (in Faculty)
Start Date:11/2017


Project Title:Enhancing the application of electrical coiling of viscous liquid jets for printing through experimental and theoretical investigation of the coiling dynamics
Investigator(s):Shum HC, Li J
Department:Mechanical Engg
Source(s) of Funding:France/Hong Kong Joint Research Scheme - Travel Grants
Start Date:01/2018


Project Title:Outstanding Young Researcher Award 2016-17
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Outstanding Young Researcher Award
Start Date:01/2018


Project Title:All-aqueous emulsions generated at the non-equilibrium aqueous-aqueous interface and their stablization by DNA-coated particles (CRF)
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Seed Funding for Strategic Interdisciplinary Research Scheme
Start Date:04/2018


Project Title:Size and shape-asymmetry based sorting of colloidal objects
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:04/2018


Project Title:Droplet-based microfluidics for identification of biomarkers in ovarian cancer and assisted reproduction
Investigator(s):Shum HC, Wong AST, Yeung WSB
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:06/2018


Project Title:Fast scaffold-free assembly of cells into compact cell sheets via the organized spreading of all-aqueous droplets (OSAD)
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


Project Title:Manipulating Differentiation of Human Marrow-derived Mesenchymal Stem Cells in Liquid Marbles
Investigator(s):Shum HC
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2019


List of Research Outputs

CHAO Y., MAK S.Y., Rahman S., ZHU S. and Shum H.C., Generation of High‐Order All‐Aqueous Emulsion Drops by Osmosis‐Driven Phase Separation, Small. Wiley, 2018, 14: 1802107.
Chan Y.K., YAN W.H., HUNG L.T., CHAO Y., WU J. and Shum H.C., All Aqueous Thin-film-flow-induced Cell-based Monolayer, ACS Applied Materials & Interfaces. ACS Publications, 2019, 11: 22869-22877.
Chan Y.K., LU Y., Wong D. and Shum H.C., Emulsification of silicone oil (SiO) tamponade with high-molecular-weight (HMW) additive under simulated saccadic eye movements in vitro using an “Eye-on-a-Chip”, The Association for Research in Vision and Ophthalmology (ARVO) Annual Meeting 2018, Investigative Ophthalmology & Visual Science. The Association for Research in Vision and Ophthalmology, 2018, 59: 5927.
Deng Y., MA Q., YUAN H., Lum G. and Shum H.C., Development of dual-component protein microparticles in all-aqueous systems for biomedical applications, Journal of Materials Chemistry B. Royal Society of Chemistry (RSC), 2019, 19: 3059-3065.
FRASER L.A., Cheung Y.W., Kinghorn A.B., Guo W., SHIU C.C., JINATA C., LONG F., BHUYAN S.K., Nan L., Shum H.C. and Tanner J.A., Microfluidic Technology for Nucleic Acid Aptamer Evolution and Application, Advanced Biosystems. 2019, 3: 1900012.
FU X., ZHANG Y., YUAN H., Binks B.P. and Shum H.C., Controlled Actuation of Liquid Marbles on a Dielectric, ACS Applied Materials and Interfaces. American Chemical Society (ACS), 2018, 10: 34822-34827.
Guo W., Tang M., Kinghorn A.B., Tanner J.A. and Shum H.C., Droplet Microfluidics for RNA fluorogenic aptamer screening, MNMC EMBS Micro and Nanotechnology in Medicine Conference, Koloa, Hawaii, USA. 2018.
Jeyhani M., Mak S.Y., Sammut S., Shum H.C., Hwang D.K. and Tsai S.S.H., Controlled Electrospray Generation of Nonspherical Alginate Microparticles, Chemphyschem. 2018, 19(16): 2113-2118.
LEE C.M., Lau K.S.A., TANG H.L., Wang M., Mok T.Y., CHUNG M.F., Yan W., Shum H.C., Cheah K.S.E., Chan G.C.F., So H.K.H., Wong K.K.Y. and Tsia K.K.M., Multi‐ATOM: Ultrahigh‐throughput single‐cell quantitative phase imaging with subcellular resolution, Journal of Biophotonics. 2019, e201800479.
LI J., Kong T., Yu J., Lee K.H., Tang Y.H., Kwok K.W., Kim J. and Shum H.C., Electrocoiling-guided Printing of Multiscale Architectures at Single-wavelength Resolution, Lab on a Chip. Royal Society of Chemistry, 2019, 19(11): 1953-1960.
LU Y., Chan Y.K., CHAO Y., Shih K.C., Lai J.S.M., Wong S.H.D. and Shum H.C., Adhesion of silicone oil and emulsification: an in vitro assessment using a microfluidic device and ‘Eye‐on‐a‐Chip’, Acta Ophthalmologica. 2018.
Li S., Ip K.M., Tang Y.H., Tang K.S., Tong Y., Zhang J., Hassan A.A., Mak A.S.C., Yung S.S.Y., Chan D.T.M., Ip P.C.P., Lee C.L., Chiu C.N., Lee L.T.O., Lai H.C., Zeng J.Z., Shum H.C. and Wong A.S.T., Sialyl LewisX-P-selectin cascade mediates tumor-mesothelial adhesion in ascitic fluid shear flow, Nat Cummun. 2019, 10(1): 2406.
Liu Z., ZHANG Y., Yang T., Wang Z. and Shum H.C., Compressed liquid marble ruptures at edge , Applied Physics Letters. American Institute of Physics (AIP), 2019, 114: 243701.
Liu Z., Yang T., Huang Y., Liu Y., Chen L., Deng L., Shum H.C. and Kong T., Electrocontrolled Liquid Marbles for Rapid Miniaturized Organic Reactions, Advanced Functional Materials. Wiley, 2019, 29: 1901101.
Shum H.C., 19th International Pharmaceutical Technology Symposium, Droplet-based formulations for encapsulation of drugs. 2018.
Shum H.C., Song Y., Knowles T. and Michaels T., 2018 MRS Fall Meeting, Mimicking Dividing Cells by Assembly of Protein Structures Inside Aqueous Two- Phase Droplets. 2018.
Shum H.C., 77th New England Workshop on Complex Fluids, Assembly at aqueous-aqueous interfaces. 2018.
Shum H.C., Associate Editor, In: Leslie Yeo, Anderson Shum, Biomicrofluidics. American Institute of Physics (AIP), 2018.
Shum H.C., IEEE NEMS 2019, Micro-engineered liquid-liquid interfaces for assembly of macromolecules. 2019.
Shum H.C., IEEE Nanomed 2018 New Innovator, IEEE-Nanomed 2018. 2018.
Shum H.C., IEEE Nanomed 2018, Biomimetic all-aqueous droplets for biomedical applications. 2018.
Shum H.C., International Multidisciplinary Conference on Optofluidics IMCO 2019, Digital electro-manipulation of liquid marbles. 2019.
Shum H.C., International Symposium on Microchemistry and Microsystems 2019, Electrical manipulation of liquid marbles for microreactions . 2019.
Shum H.C., Silver Medal, 47th International Exhibition of Inventions, Geneva, Switzerland . 2019.
Shum H.C., The 11th National Conference on Soft Matter and Biological Physics, Cytomimetic all-aqueous droplets stabilized by protein nanofibrils. 2018.
Shum H.C., The 8th International Multidisciplinary Conference on Optofluidics (IMCO 2018), Cytomimetic all-aqueous droplets. 2018.
Shum H.C., Young Scientists Award, Microsystems and Nanoengineering Summit 2019. 2019.
WU J., Mak H.K., Chan Y.K., Lin C., KONG C., Leung K.S. and Shum H.C., An in vitro pressure model towards studying the response of primary retinal ganglion cells to elevated hydrostatic pressures, Scientific Reports. 2019, 9.
YUAN H., CHAO Y., Li S., Tang Y.H., HUANG Y., CHE Y., Wong A.S.T., Zhang T. and Shum H.C., Picoinjection-Enabled Multitarget Loop-Mediated Isothermal Amplification for Detection of Foodborne Pathogens, Analytical Chemistry. American Chemical Society (ACS), 2018, 90: 13173-13177.


Researcher : Siu KW
List of Research Outputs

Siu K.W., Liu H. and Ngan A.H.W., A universal law for metallurgical effects on acoustoplasticity, Materialia. Elsevier, 2019, 5: 100214.
Siu K.W. and Ngan A.H.W., Relation between yield stress and Peierls stress, Physica Status Solidi b. Wiley, 2019, 256: 1900107.


Researcher : Soh AK
Project Title:International Conference on Materials for Advanced Technologies 2007 Phase field simulation of surface roughening of heteroepitaxial films
Investigator(s):Soh AK
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:07/2007




Researcher : Song X
List of Research Outputs

ZHU B., Lam J. and Song X., Stability and L1-gain analysis of linear periodic piecewise positive systems, Automatica. England, Pergamon-elsevier Science Ltd, 2019, 101: 232-240.


Researcher : Song Y
List of Research Outputs

Shum H.C., Song Y., Knowles T. and Michaels T., 2018 MRS Fall Meeting, Mimicking Dividing Cells by Assembly of Protein Structures Inside Aqueous Two- Phase Droplets. 2018.


Researcher : Sun C
Project Title:Mathematical modeling in HIV transmission, prevention and control in three special groups
Investigator(s):Sun C, Lam J
Department:Mechanical Engg
Source(s) of Funding:Small Project Funding
Start Date:06/2013




Researcher : Sze KY
Project Title:Computational methods for meso-electromechanical analysis of ferroelectrics and ferroelectric devices
Investigator(s):Sze KY
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2001


Project Title:Development of efficient rotation-free triangles for shell and drape analyses.
Investigator(s):Sze KY
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2010


Project Title:Formulating advanced quadrilateral and hexahedral spectral elements for solid and structural analyses.
Investigator(s):Sze KY
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:12/2013


Project Title:41st SOLID MECHANICS CONFERENCE; A Simple and Efficient Geometric Nonlinear Rotation-Free Triangle and its Application in Drape Simulation
Investigator(s):Sze KY
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:08/2018
Completion Date:08/2018


List of Research Outputs

LUN T.L.T., WANG K., HO J.D.-.L., Lee K.H., Sze K.Y. and Kwok K.W., Real-time Surface Shape Sensing for Soft and Flexible Structures using Fiber Bragg Gratings, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1454 - 1461.


Researcher : TANG X
List of Research Outputs

TANG X., Manipulation of Micro/Nanolitre Fluids with Non-Wetting Interfaces, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-148.
Zhu P., Kong T., TIAN Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. 2018, 5: 1156-1165.
Zhu P., Kong T., Tian Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. The Royal Society of Chemistry, 2018, 5: 1156-1165.


Researcher : TIAN Y
List of Research Outputs

TIAN Y., Mini/microfiber: From Fabrication to Water Collection and Biomedical Applications, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-223.
Zhu P., Kong T., TIAN Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. 2018, 5: 1156-1165.


Researcher : Tan ST
Project Title:Heterogeneous solid modeling using materially defined geometric entities
Investigator(s):Tan ST
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:04/2005


Project Title:Adaptive mesh generation for the finite element analysis of heterogeneous objects
Investigator(s):Tan ST
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2010


Project Title:Visiting Research Professors Scheme 2010-11
Investigator(s):Tan ST
Department:Mechanical Engg
Source(s) of Funding:Visiting Research Professors Scheme
Start Date:09/2010


Project Title:Tailoring Material Elasticity by Manipulation of Complex Periodic Microstructures
Investigator(s):Tan ST
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011




Researcher : Tang WL
List of Research Outputs

DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., Tao Y., Lee A.P.W. and Kwok K.W., Best Poster Paper Award (2nd place), 2019 IEEE International Conference on Robotics and Automation (ICRA’19) workshop on Surgical Robots, sponsored by Intuitive Surgical Inc.. 2019.
DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., TAO Y., LEE A.P.W. and Kwok K.W., Experimental Validation of Autonomous Motion Control with Standard Cardiac Electrophysiology Catheter, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems. 2019.
DONG Z., GUO Z., Lee K.H., FANG G., Tang W.L., Chang H.C.C., Chan D.T.M. and Kwok K.W., High-performance Continuous Hydraulic Motor for MR Safe Robotic Teleoperation, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1964-1971.
HO J.D.-.L., LEE K.H., Tang W.L., Hui K.M., Althoefer K., Lam J. and Kwok K.W., Localised Online Learning-Based Control of a Soft Redundant Manipulator Under Variable Loading, Advanced Robotics. 2018, 32(21): 1-16.


Researcher : Tang X
List of Research Outputs

TANG X., Manipulation of Micro/Nanolitre Fluids with Non-Wetting Interfaces, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-148.
Zhu P., Kong T., TIAN Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. 2018, 5: 1156-1165.
Zhu P., Kong T., Tian Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. The Royal Society of Chemistry, 2018, 5: 1156-1165.


Researcher : Tang X
List of Research Outputs

TANG X., Manipulation of Micro/Nanolitre Fluids with Non-Wetting Interfaces, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-148.
Zhu P., Kong T., TIAN Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. 2018, 5: 1156-1165.
Zhu P., Kong T., Tian Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. The Royal Society of Chemistry, 2018, 5: 1156-1165.


Researcher : Tang YH
List of Research Outputs

LI J., Kong T., Yu J., Lee K.H., Tang Y.H., Kwok K.W., Kim J. and Shum H.C., Electrocoiling-guided Printing of Multiscale Architectures at Single-wavelength Resolution, Lab on a Chip. Royal Society of Chemistry, 2019, 19(11): 1953-1960.
Li S., Ip K.M., Tang Y.H., Tang K.S., Tong Y., Zhang J., Hassan A.A., Mak A.S.C., Yung S.S.Y., Chan D.T.M., Ip P.C.P., Lee C.L., Chiu C.N., Lee L.T.O., Lai H.C., Zeng J.Z., Shum H.C. and Wong A.S.T., Sialyl LewisX-P-selectin cascade mediates tumor-mesothelial adhesion in ascitic fluid shear flow, Nat Cummun. 2019, 10(1): 2406.
YUAN H., CHAO Y., Li S., Tang Y.H., HUANG Y., CHE Y., Wong A.S.T., Zhang T. and Shum H.C., Picoinjection-Enabled Multitarget Loop-Mediated Isothermal Amplification for Detection of Foodborne Pathogens, Analytical Chemistry. American Chemical Society (ACS), 2018, 90: 13173-13177.


Researcher : Tang YS
List of Research Outputs

CHIU T.L., Tang Y.S., Cheng S.W.K. and Chow K.W., Analysis of flow patterns on branched endografts for aortic arch aneurysms, Informatics in Medicine Unlocked. Elsevier, 2018, 13: 62-70.


Researcher : Tian X
List of Research Outputs

HAN X., Kang Z., Tian X. and Wang L., Experimental observations on the interface front of phase change material inside cylindrical cavity, Energy Storage. 2019, 1: e36.
LEI L., Kong T., Zhu P., KANG Z., Tian X. and Wang L., Self-Assembly of TiO 2 Nanofiber-Based Microcapsules by Spontaneously Evolved Multiple Emulsions , Langmuir. 2018, 34: 8785-8791.
Tian X. and Wang L., Engineering embolic microparticles from a periodically-pulsating charged liquid meniscus, 5th Global Congress & Expo on Materials Science and Nanoscience. 2019.
Tian X. and Wang L., Entropy Analysis In Heat Conduction, 607th International Academic Conference on Engineering, Technology and Innovations (IACETI). 2019.
Zhu P., Kong T., Tian Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. The Royal Society of Chemistry, 2018, 5: 1156-1165.
Zhu P., Kong T., TIAN Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. 2018, 5: 1156-1165.


Researcher : Tian X
List of Research Outputs

HAN X., Kang Z., Tian X. and Wang L., Experimental observations on the interface front of phase change material inside cylindrical cavity, Energy Storage. 2019, 1: e36.
LEI L., Kong T., Zhu P., KANG Z., Tian X. and Wang L., Self-Assembly of TiO 2 Nanofiber-Based Microcapsules by Spontaneously Evolved Multiple Emulsions , Langmuir. 2018, 34: 8785-8791.
Tian X. and Wang L., Engineering embolic microparticles from a periodically-pulsating charged liquid meniscus, 5th Global Congress & Expo on Materials Science and Nanoscience. 2019.
Tian X. and Wang L., Entropy Analysis In Heat Conduction, 607th International Academic Conference on Engineering, Technology and Innovations (IACETI). 2019.
Zhu P., Kong T., Tian Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. The Royal Society of Chemistry, 2018, 5: 1156-1165.
Zhu P., Kong T., TIAN Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. 2018, 5: 1156-1165.


Researcher : WANG C
List of Research Outputs

Jiang C., Wang C. and Huang L., Acoustic characterization of ducts lined with poroelastic materials based on wave finite element method, Applied Acoustics. Elsevier, 2019, 145: 362-373.
WANG C. and Chen Y., Phonons across order-disorder transition in AgCrSe2, Gordon Research Conference on Neutron Scattering. 2019.
Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
Wang X., Li J., WANG C., Zhou B., Zheng L., Gao B., Chen Y. and Pei Y., Orbital alignment for high performance thermoelectric YbCd2Sb2 alloys, Chem. Mater.. 2018, 30: 5339.
Xu Y., Li W., WANG C., Chen Z., Wu Y., Zhang X., Li J., Lin S., Chen Y. and Pei Y., MnTe2 as a novel promising thermoelectric material, J. Materiomics. 2018, 4: 215.


Researcher : WANG K
List of Research Outputs

FANG G., WANG X., WANG K., Lee K.H., HO J.D.-.L., FU H.C., Fu K.C.D. and Kwok K.W., Vision-based Online Learning Control for Soft Robots using Local Gaussian Process Regression, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1194-1201.
LUN T.L.T., WANG K., HO J.D.-.L., Lee K.H., Sze K.Y. and Kwok K.W., Real-time Surface Shape Sensing for Soft and Flexible Structures using Fiber Bragg Gratings, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1454 - 1461.
WANG K., Li Y., Luo Z., Yin S. and Chan P.W., Harmonic analysis of 130-year hourly air temperature in Hong Kong: detecting urban warming from the perspective of annual and daily cycles, Climate Dynamics. 2018, 51: 613-625.
Wang K., Li Y., LI Y. and Lin B., Stone forest as a small-scale field model for the study of urban climate, International Journal of Climatology. 2018, 38: 3723-3731.


Researcher : WANG K
List of Research Outputs

FANG G., WANG X., WANG K., Lee K.H., HO J.D.-.L., FU H.C., Fu K.C.D. and Kwok K.W., Vision-based Online Learning Control for Soft Robots using Local Gaussian Process Regression, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1194-1201.
LUN T.L.T., WANG K., HO J.D.-.L., Lee K.H., Sze K.Y. and Kwok K.W., Real-time Surface Shape Sensing for Soft and Flexible Structures using Fiber Bragg Gratings, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1454 - 1461.
WANG K., Li Y., Luo Z., Yin S. and Chan P.W., Harmonic analysis of 130-year hourly air temperature in Hong Kong: detecting urban warming from the perspective of annual and daily cycles, Climate Dynamics. 2018, 51: 613-625.
Wang K., Li Y., LI Y. and Lin B., Stone forest as a small-scale field model for the study of urban climate, International Journal of Climatology. 2018, 38: 3723-3731.


Researcher : WANG P
List of Research Outputs

Ngan A.H.W., WANG P. and Kwan K.W., Patterned printing of ceramics by electrodeposition, and applications in micro-robotics, Invited talk, Electrochemical Society 2018 Fall Meeting, Sept. 30 – Oct. 4, 2018, Cancun, Mexico.. 2018.


Researcher : WANG Q
List of Research Outputs

WANG Q., WANG Y., FAN Y., Hang J. and Li Y., Urban heat island circulations of an idealized circular city as affected by background wind speed, Building and Environment. 2019, 148: 433-447.


Researcher : WANG X
List of Research Outputs

DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., Tao Y., Lee A.P.W. and Kwok K.W., Best Poster Paper Award (2nd place), 2019 IEEE International Conference on Robotics and Automation (ICRA’19) workshop on Surgical Robots, sponsored by Intuitive Surgical Inc.. 2019.
DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., TAO Y., LEE A.P.W. and Kwok K.W., Experimental Validation of Autonomous Motion Control with Standard Cardiac Electrophysiology Catheter, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems. 2019.
FANG G., WANG X., WANG K., Lee K.H., HO J.D.-.L., FU H.C., Fu K.C.D. and Kwok K.W., Vision-based Online Learning Control for Soft Robots using Local Gaussian Process Regression, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1194-1201.
WANG X. and Chan B.P., Gradient immobilization of Wnt proteins by multiphoton biofabrication technology., European Wnt Meeting. 12-14 Sep 2018, Heidelberg, Germany.. 2018.
Wang X., Member of the Editorial Board (2007 - Present), Frontiers of Materials Science. China, and Springer, Germany, Higher Education Press, 2018.


Researcher : WANG X
List of Research Outputs

DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., Tao Y., Lee A.P.W. and Kwok K.W., Best Poster Paper Award (2nd place), 2019 IEEE International Conference on Robotics and Automation (ICRA’19) workshop on Surgical Robots, sponsored by Intuitive Surgical Inc.. 2019.
DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., TAO Y., LEE A.P.W. and Kwok K.W., Experimental Validation of Autonomous Motion Control with Standard Cardiac Electrophysiology Catheter, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems. 2019.
FANG G., WANG X., WANG K., Lee K.H., HO J.D.-.L., FU H.C., Fu K.C.D. and Kwok K.W., Vision-based Online Learning Control for Soft Robots using Local Gaussian Process Regression, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1194-1201.
WANG X. and Chan B.P., Gradient immobilization of Wnt proteins by multiphoton biofabrication technology., European Wnt Meeting. 12-14 Sep 2018, Heidelberg, Germany.. 2018.
Wang X., Member of the Editorial Board (2007 - Present), Frontiers of Materials Science. China, and Springer, Germany, Higher Education Press, 2018.


Researcher : WANG Y
List of Research Outputs

KWOK Y.H., Wang Y., WU M., LI F., ZHANG Y., Zhang H. and Leung Y.C.D., A dual fuel microfluidic fuel cell utilizing solar energy and methanol, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 409: 58-65.
PAN W., Wang Y., KWOK Y.H. and Leung Y.C.D., A low-cost portable cotton-based aluminum-air battery with high specific energy, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 179-185.
WANG Q., WANG Y., FAN Y., Hang J. and Li Y., Urban heat island circulations of an idealized circular city as affected by background wind speed, Building and Environment. 2019, 148: 433-447.
Wang Y., KWOK Y.H., ZHANG Y., PAN W. and Leung Y.C.D., Flexible hydrogen fuel cell fabricated on paper with embedded aluminium foil, Proceeding of the International Symposium on Hydrogen Energy & Energy Technologies (HEET2018). Japan, 2019, E3S Web of Conference 83,01004 (2019): pp.8.
Wang Y., KWOK Y.H., PAN W., Zhang H.M. and Leung Y.C.D., Innovative paper-based Al-air batteries as a low-cost and green energy technology for the miniwatt market, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 414: 278-282.
Wang Y., PAN W., KWOK Y.H., Lu X. and Leung Y.C.D., Low-cost Al-air batteries with paper-based solid electrolyte, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 522-527.
Xu M., Chen Y., XIONG F., Wang J., Liu Y., Lv J., Li Y., Wang Y., Chen Z. and Ma Y., A hidden symmetry-broken phase of MoS2 revealed as a superior photovoltaic material, J. Mater. Chem. A. 2018, 6: 16087.
Zhang H.M., Wang Y., KWOK Y.H., Wu Z.C., Xia D.H. and Leung Y.C.D., A Direct Ammonia Microfluidic Fuel Cell using NiCu Nanoparticles Supported on Carbon Nanotubes as an Electrocatalyst, ChemSusChem. Weinheim, Germany, Wiley-VCH Verlag GmbH & Co., 2018, 11: 2889-2897.


Researcher : WEI X
List of Research Outputs

Cao Y., WEI X., Lin Y. and Sun F., Synthesis of bio-inspired viscoelastic molecular networks by metal-induced protein assembly, Molecular Systems Design & Engineering. 2019, . DOI: 10.1039/C9ME00027E.
FANG C., HUI T.H., WEI X., YAN Z., Qian J. and Lin Y., Interaction and fusion dynamics between cellular blebs, Journal of Biomechanics. 2018, 81: 113-121.
GONG Z., FANG C., You R., SHAO X., WEI X., Chang R.C.C. and Lin Y., Distinct Relaxation Timescales of Neurites Revealed by Rate-dependent Indentation, Relaxation and Micro-rheology Tests, Soft Matter. 2019, 15: 166-174.
Gong B., Lin J., WEI X., Qian J. and Lin Y., Cross-linked biopolymer networks with active motors: Mechanical response and intra-network transport, Journal of the Mechanics and Physics of Solids. 2019, 127: 80-93.
Gong B., WEI X., Qian J. and Lin Y., Modeling and Simulations of the Dynamic Behaviors of Actin-Based Cytoskeletal Networks, ACS Biomaterials Science & Engineering. 2019, 5: 3720-3734.
WEI X., WEN P. and Lin Y., Continuum-Level Simulations of Biopolymer Networks: A Minireview, Current Trends in Biomedical Engineering & Biosciences. 2019, 19: 556005.
Yang Z., Kou S., WEI X., Zhang F., Li F., Wang X., Wan C., Zhang W. and Sun F., Genetically Programming Stress-Relaxation Behavior in Entirely Protein-Based Molecular Networks, ACS Marco Lett. 2018, 7: 1468-1474.


Researcher : WEN P
List of Research Outputs

WEI X., WEN P. and Lin Y., Continuum-Level Simulations of Biopolymer Networks: A Minireview, Current Trends in Biomedical Engineering & Biosciences. 2019, 19: 556005.
WEN P., A Computational Investigation on the Membrane Dynamics During Different Cellular Processes, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-99.


Researcher : WU J
List of Research Outputs

Chan Y.K., YAN W.H., HUNG L.T., CHAO Y., WU J. and Shum H.C., All Aqueous Thin-film-flow-induced Cell-based Monolayer, ACS Applied Materials & Interfaces. ACS Publications, 2019, 11: 22869-22877.
WU J., Mak H.K., Chan Y.K., Lin C., KONG C., Leung K.S. and Shum H.C., An in vitro pressure model towards studying the response of primary retinal ganglion cells to elevated hydrostatic pressures, Scientific Reports. 2019, 9.
Wu J., SUN H., GUO L. and Wang M., Continuous wet spinning and dug-loaded wet-spun fibers, 43rd International Conference and Exposition on Advanced Ceramics and Composites (ICACC’19). Daytona Beach, USA, 2019, 1 pp.


Researcher : WU M
List of Research Outputs

KWOK Y.H., Wang Y., WU M., LI F., ZHANG Y., Zhang H. and Leung Y.C.D., A dual fuel microfluidic fuel cell utilizing solar energy and methanol, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 409: 58-65.
Shu Y., Xu Y., Huang H.B., Ji J., Liang S., WU M. and Leung Y.C.D., Catalytic oxidation of VOCs over Mn/TiO2/activated carbon under 185 nm VUV irradiation, Chemosphere. UK, Pergamon-elsevier Science Ltd., 2018, 208: 550-558.
WU M., Leung Y.C.D., ZHANG Y., Huang H.B., Xie R., Szeto W. and LI F., Toluene degradation over Mn-TiO2/CeO2 composite catalyst under vacuum ultraviolet (VUV) irradiation, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 195: 985-994.
WU M., ZHANG Y., Szeto W. and Leung Y.C.D., VOC degradation over nano CeO2 photocatalysts under VUV irradiation, International Conference on Chemistry and the Environment. Greene, EuchemS, 2019, Abstract Book: pp.1.
WU M., ZHANG Y., Szeto W., PAN W., Huang H.B. and Leung Y.C.D., Vacuum ultraviolet (VUV)-based photocatalytic oxidation for toluene degradation over pure CeO2, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 200: 203-213.


Researcher : WU Z
List of Research Outputs

Liu C.H., Cheng W.C., LI W., MO Z., WU Z., Chan Y.L., Kwan W.K. and Yau H.T., Computational Fluid Dynamics Study of Wind Environment in Urban Areas, PRAGMA35; 3 to 6 October 2018; Penang, Malaysia. 2018.
Liu C.H., MO Z. and WU Z., Parameterization of vertical dispersion coefficient over idealized rough surfaces in isothermal conditions, Geoscience Letters. Springer, 2018, 5: 1-11.
WU Z. and Liu C.H., Budget analysis for reactive plume transport over idealised urban areas, Geoscience Letters. Springer, 2018, 5: 1-7.
WU Z. and Liu C.H., Budget analysis of pollutant transport over urban roughness, ICUC10; August 6 to 10, 2018; New York, NY, USA. 2018.
WU Z., Dispersion Mechanism and Parameterizations of Chemically Reactive Pollutant in the Atmospheric Boundary Layer, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-206.
WU Z. and Liu C.H., Source depletion analogy for reactive plume dispersion over schematic urban areas, Atmospheric Environment. Elsevier, 2018, 190: 226-231.


Researcher : Wang C
List of Research Outputs

Jiang C., Wang C. and Huang L., Acoustic characterization of ducts lined with poroelastic materials based on wave finite element method, Applied Acoustics. Elsevier, 2019, 145: 362-373.
WANG C. and Chen Y., Phonons across order-disorder transition in AgCrSe2, Gordon Research Conference on Neutron Scattering. 2019.
Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
Wang X., Li J., WANG C., Zhou B., Zheng L., Gao B., Chen Y. and Pei Y., Orbital alignment for high performance thermoelectric YbCd2Sb2 alloys, Chem. Mater.. 2018, 30: 5339.
Xu Y., Li W., WANG C., Chen Z., Wu Y., Zhang X., Li J., Lin S., Chen Y. and Pei Y., MnTe2 as a novel promising thermoelectric material, J. Materiomics. 2018, 4: 215.


Researcher : Wang C
List of Research Outputs

Jiang C., Wang C. and Huang L., Acoustic characterization of ducts lined with poroelastic materials based on wave finite element method, Applied Acoustics. Elsevier, 2019, 145: 362-373.
WANG C. and Chen Y., Phonons across order-disorder transition in AgCrSe2, Gordon Research Conference on Neutron Scattering. 2019.
Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
Wang X., Li J., WANG C., Zhou B., Zheng L., Gao B., Chen Y. and Pei Y., Orbital alignment for high performance thermoelectric YbCd2Sb2 alloys, Chem. Mater.. 2018, 30: 5339.
Xu Y., Li W., WANG C., Chen Z., Wu Y., Zhang X., Li J., Lin S., Chen Y. and Pei Y., MnTe2 as a novel promising thermoelectric material, J. Materiomics. 2018, 4: 215.


Researcher : Wang L
Project Title:Microfluidic Nanofluids: Synthesis and Characterization
Investigator(s):Wang L
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2010


Project Title:Smart and High-Conductive Nanofluids
Investigator(s):Wang L
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2012


Project Title:Integrating variable-speed ground-coupled heat pump with hybrid convective/radiant cooling for novel energy-efficient air conditioning in sub-tropical and temperate regions
Investigator(s):Wang L
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:10/2012


Project Title:Engineering Water and Oil with Ultra-high Thermal Conductivity
Investigator(s):Wang L
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2014


Project Title:Microfluidic Fabrication of Thermally-Smart Nanoparticle Colloidosomes with Single or Multiple Compartments
Investigator(s):Wang L
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2015


Project Title:Microfluidic Fabrication and Characterization of Embolization Microspheres
Investigator(s):Wang L
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:04/2015


Project Title:Engineering Embolic Microparticles with Uniform Shape and Size
Investigator(s):Wang L
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2016


Project Title:Engineering Chemoembolization Microparticles with Microfluidic Technique
Investigator(s):Wang L
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:03/2016


Project Title:Chemoembolization Microparticles: Microfluidic Fabrication and Characterization
Investigator(s):Wang L
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2017


Project Title:Bio-inspired surface engineering for phase change heat transfer: From fundamental understanding to practical applications
Investigator(s):Wang L
Department:Mechanical Engg
Source(s) of Funding:Collaborative Research Fund (CRF) - Group Research Project
Start Date:02/2018


Project Title:Liquid-repellent surfaces: microfluidic-droplet-based fabrication of springtail-cuticle-like porous surfaces
Investigator(s):Wang L, Zhu P
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2019


List of Research Outputs

Cai J., Zhang C., Khan A., Wang L. and Li W., Selective Electroless Metallization of Micro-and Nanopatterns via Poly (dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications, ACS Applied Materials & Interfaces. 2018.
HAN X., Kang Z., Tian X. and Wang L., Experimental observations on the interface front of phase change material inside cylindrical cavity, Energy Storage. 2019, 1: e36.
LEI L., Kong T., Zhu P., KANG Z., Tian X. and Wang L., Self-Assembly of TiO 2 Nanofiber-Based Microcapsules by Spontaneously Evolved Multiple Emulsions , Langmuir. 2018, 34: 8785-8791.
Tian X. and Wang L., Engineering embolic microparticles from a periodically-pulsating charged liquid meniscus, 5th Global Congress & Expo on Materials Science and Nanoscience. 2019.
Tian X. and Wang L., Entropy Analysis In Heat Conduction, 607th International Academic Conference on Engineering, Technology and Innovations (IACETI). 2019.
Zhou C., Zhu P., Tian Y., Xu M. and Wang L., Engineering micromotors with droplet microfluidics, ACS Nano. American Chemical Society, 2019, 13(6): 6319-6329.
Zhu P. and Wang L., Droplet Microfluidics for Robust Omniphobic Surfaces, 8th International Multidisciplinary Conference on Optofluidics . 2018.
Zhu P. and Wang L., Droplet pinch-off with pressure fluctuations, Chemical Engineering Science. 2019, 196: 333-343.
Zhu P., Kong T., TIAN Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. 2018, 5: 1156-1165.
Zhu P., Kong T., Tian Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. The Royal Society of Chemistry, 2018, 5: 1156-1165.


Researcher : Wang M
Project Title:Bioactive and biodegradable composites for bone tissue repair
Investigator(s):Wang M, Lu WW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:12/2005


Project Title:Compostie tssue engineering scaffolds and the synergetic effects of simultaneous controlled release of several bioactive substances
Investigator(s):Wang M
Department:Mechanical Engg
Source(s) of Funding:Matching Fund for NSFC Academic Collaboration Award
Start Date:01/2009


Project Title:Emulsion Electrospinning and Formation of Bicomponent Fibrous Scaffolds for the Dual Growth Factor Delivery in Tissue Engineering
Investigator(s):Wang M
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:12/2009


Project Title:Novel and Multifunctional Composite Coatings for the Medical Application of NiTi Shape Memory Alloy
Investigator(s):Wang M
Department:Mechanical Engg
Source(s) of Funding:Incentive Award for RGC GRF Fundable But Not Funded Projects
Start Date:07/2011


Project Title:Electrospinning of Cell- and Growth Factor-incorporated, Multilayered Fibrous Scaffolds for the Regeneration of Complex Body Tissues
Investigator(s):Wang M, Lu WW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:01/2014


Project Title:An Investigation into the Fabrication of Cell-laden Hydrogel Fibers by Wet-spinning for Tissue Regeneration Applications
Investigator(s):Wang M
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:04/2017
Completion Date:04/2019


Project Title:Fabrication of Advanced Cell-scaffold Constructs in Tissue Engineering and their Assessment
Investigator(s):Wang M, Lu WW
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:10/2017


Project Title:An Investigation into the Fabrication of Bijels-derived Bicontinuous Porous Structures for Biomedical Applications
Investigator(s):Wang M
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:05/2018


Project Title:International Conference on Materials for Advanced Technologies 2019 (ICMAT 2019); Combination Devices for Treating Postoperative Cancer Patients
Investigator(s):Wang M
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:06/2019
Completion Date:06/2019


List of Research Outputs

GUAN Q., Zheng L. and Wang M., Cancer cell targeting, imaging and combined chemo-photothermal therapy by core-shell structured theranostics, Materials Science & Technology 2018 Conference & Exhibition. Columbus, USA, 2018, 1 pp.
GUO L. and Wang M., Fabrication and performance of nanofibrous cell- and growth factor-incorporated tissue engineering scaffolds, 43rd International Conference and Exposition on Advanced Ceramics and Composites (ICACC’19). Daytona Beach, USA, 2019, 1 pp.
GUO L. and Wang M., Growth factor-encapsulated and cell-laden scaffolds for gastrointestinal tract regeneration, Materials Science & Technology 2018 Conference & Exhibition. Columbus, USA, 2018, 1 pp.
LI H. and Wang M., Fabrication and evaluation of multilayered tissue engineering scaffolds incorporated with mesenchymal stem cells, International Conference on Materials for Advanced Technologies 2019 (ICMAT 2019). Singapore, 2019, 1 pp.
LI H., SUN H. and Wang M., Nanofibrous scaffolds with both MSC-laden cell fibers and growth factor-loaded fibers for tissue regeneration, Materials Research Society Fall Meeting. Boston, USA, 2018, 1 pp.
LI J., SUN H. and Wang M., A novel facile method for bijels fabrication, 2019 Spring Meeting of the European Materials Research Society (E-MRS). Nice, France, 2019, 1 pp.
LI J., SUN H. and Wang M., Bijels-derived hybrid hydrogel membranes as delivery vehicles for the controlled release of bio-agents, HKU-Osaka University Joint Symposium on Materials Research. Osaka, Japan, 2018, 1 pp.
LI J., SUN H., Haase M.F. and Wang M., Fabrication and characteristics of bijels-derived hybrid hydrogel membranes for anticancer drug delivery, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
LIU C., Li X., Xu F., Cong H., Li Z., Song Y. and Wang M., Spatio-temporal release of NGF and GDNF from multi-layered nanofibrous bicomponent electrospun scaffolds, Journal of Materials Science: Materials in Medicine. Netherlands, Springer, 2018, 29(7): pp.13.
SUN H. and Wang M., Cell proliferation and migration in bicontinuous bijels-derived hybrid hydrogel membranes, 2019 Spring Meeting of the European Materials Research Society (E-MRS). Nice, France, 2019, 1 pp.
SUN H. and Wang M., Delivery of growth factors via bijels-derived hybrid hydrogels, Materials Research Society Fall Meeting. Boston, USA, 2018, 1 pp.
SUN H. and Wang M., Fabrication of biocompatible bijels-derived hybrid hydrogel membranes for growth factor delivery, Materials Science & Technology 2018 Conference & Exhibition. Columbus, USA, 2018, 1 pp.
Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
Wang M., 3D printing of multifunctional tissue engineering scaffolds, Materials Research Society Fall Meeting. Boston, USA, 2018, 1 pp.
Wang M., 3D printing of multifunctional tissue engineering scaffolds, Materials Research Society Fall Meeting. Boston, USA, 2018, 1 pp.
Wang M., Advanced tissue engineering scaffolds for postoperative cancer patients, Materials Science & Technology 2018 Conference & Exhibition. Columbus, USA, 2018, 1 pp.
Wang M., Advanced tissue engineering scaffolds for postoperative cancer patients, Materials Science & Technology 2018 Conference & Exhibition. Columbus, USA, 2018, 1 pp.
Wang M., Associate Editor (2012 - Present), Nano LIFE. Singapore, World Scientific, 2018.
Wang M., Associate Editor (2015 - Present), Medical & Biological Engineering & Computing. Germany, Springer, 2018.
Wang M., Associate Editor (2018 - 2019), IET Nanobiotechnology. UK, Institution of Engineering and Technology, 2018.
Wang M. and Zhao Q., Biomedical composites, In: Chief Editor: Roger J. Narayan, Encyclopedia of Biomedical Engineering. The Netherlands, Elsevier, 2019, 1: 34-52.
Wang M. and Wang C., Bulk properties of biomaterials and testing methods, In: Chief Editor: Roger J. Narayan, Encyclopedia of Biomedical Engineering. The Netherlands, Elsevier, 2019, 1: 53-64.
Wang M., Ceramics in medical applications, 11th International Conference on High-Performance Ceramics (CICC-11). Kunming, China, 2019, 1 pp.
Wang M., Ceramics in medical applications, 11th International Conference on High-Performance Ceramics (CICC-11). Kunming, China, 2019, 1 pp.
Wang M., Combination devices for treating postoperative cancer patients, International Conference on Materials for Advanced Technologies 2019 (ICMAT 2019). Singapore, 2019, 1 pp.
Wang M., Combination devices for treating postoperative cancer patients, International Conference on Materials for Advanced Technologies 2019 (ICMAT 2019). Singapore, 2019, 1 pp.
Wang M., Design, fabrication and performance of biomaterials for body tissue repair and regeneration, Croucher-HKUST Joint Symposium on Synthetic Biology and Soft Living Matter. Hong Kong, 2018, 1 pp.
Wang M., Design, fabrication and performance of biomaterials for body tissue repair and regeneration, Croucher-HKUST Joint Symposium on Synthetic Biology and “Living” Soft Functional Matter. Hong Kong, 2018, 1 pp.
Wang M., Electrospinning and electrospun nanofibrous structures for medical applications, HKU-Osaka University Joint Symposium on Materials Research. Osaka, Japan, 2018, 1 pp.
Wang M., Electrospinning and electrospun nanofibrous structures for medical applications, HKU-Osaka University Joint Symposium on Materials Research. Osaka, Japan, 2018, 1 pp.
Wang M. and Zhao Q., Electrospinning and electrospyay for biomedical applications, In: Chief Editor: Roger J. Narayan, Encyclopedia of Biomedical Engineering. The Netherlands, Elsevier, 2019, 1: 330-344.
Wang M., Incorporation, release and functioning of theranostics from multifunctional tissue engineering scaffolds, 43rd International Conference and Exposition on Advanced Ceramics and Composites (ICACC?19). Daytona Beach, USA, 2019, 1 pp.
Wang M., Incorporation, release and functioning of theranostics from multifunctional tissue engineering scaffolds, 43rd International Conference and Exposition on Advanced Ceramics and Composites (ICACC’19). Daytona Beach, USA, 2019, 1 pp.
Wang M., Guo L. and SUN H., Manufacturing technologies for biomaterials, In: Chief Editor: Roger J. Narayan, Encyclopedia of Biomedical Engineering. The Netherlands, Elsevier, 2019, 1: 116-134.
Wang M. and Duan B., Materials and their biomedical applications, In: Chief Editor: Roger J. Narayan, Encyclopedia of Biomedical Engineering. The Netherlands, Elsevier, 2019, 1: 135-152.
Wang M., Member of Technical Committees (2006 - Present): TC150 Implants for surgery, International Organization for Standardization (ISO). 2018.
Wang M., Member of Technical Committees (2006 - Present): TC229 Nanotechnologies, International Organization for Standardization (ISO). 2018.
Wang M., Member of Technical Committees (2006 -Present): TC194 Biological evaluation of medical devices, International Organization for Standardization (ISO). 2018.
Wang M., Member of the Editorial Advisory Board (2016 - Present), Current Smart Materials. (Web), Bentham Science Publishers, 2018.
Wang M., Member of the Editorial Board (2004 - Present), Journal of Materials Science: Materials in Medicine. Germany, Springer, 2018.
Wang M., Member of the Editorial Board (2006 - Present), Composites Science and Technology. The Netherlands, Elsevier, 2018.
Wang M., Member of the Editorial Board (2007 - Present), Journal of Biomimetics, Biomaterials and Tissue Engineering. USA, OMICS, 2018.
Wang M., Member of the Editorial Board (2011 - Present), Bioceramics Development and Applications. USA, OMICS, 2018.
Wang M., Member of the Editorial Board (2012 - Present), Materials Letters. The Netherlands, Elsevier, 2018.
Wang M., Member of the Editorial Board (2013 - Present), International Journal of Tissue Regeneration. Korea, Catholic University of Korea, 2018.
Wang M., Member of the Editorial Board (2013 - Present), Journal of Functional Materials. China, GAPP, 2018.
Wang M., Member of the Editorial Board (2014 - Present), Biomaterials Research. Korea, Korea Society for Biomaterials, 2018.
Wang M., Member of the Editorial Board (2014 - Present), International Materials Reviews. UK, Taylor & Francis, 2018.
Wang M., Member of the Editorial Board (2014 - Present), Journal of Orthopaedic Translation. The Netherlands, Elsevier, 2018.
Wang M., Member of the Editorial Board (2017 - Present), Biomaterials and Tissue Technology. USA, OAText, 2018.
Wang M., Member of the Editorial Board (2018 - Present), Ceramics International. The Netherlands, Elsevier, 2018.
Wang M., Member of the Engineering Panel (2016 - Present), Research Grants Council, Hong Kong. 2018.
Wang M., Multifunctional tissue engineering scaffolds for postoperative cancer patients, International Forum of Biomedical Materials: Biomaterial Surfaces and Interfaces (IFBM2018). Hangzhou, China, 2018, 1 pp.
Wang M., Multifunctional tissue engineering scaffolds for postoperative cancer patients, International Forum of Biomedical Materials: Biomaterial Surfaces and Interfaces (IFBM2018). Hangzhou, China, 2018, 1 pp.
Wang M., Regional Editor (2011 - Present), Journal of Biomaterials and Tissue Engineering. USA, American Scientific Publishers, 2018.
Wang M., Series Editor (2012 - Present), Functional Hydrogels as Biomaterials. Germany, 2018, Volume 12, (Volume Editor: Jun Li, Yoshihito Osada and Justi.
Wang M., Series Editor (2012 - Present), Marine-Derived Biomaterials for Tissue Engineering Applications. Germany, 2019, Volume 14, (Vol. Editor: Andy Choi and Besim Ben-Nissan).
Wang M., Series Editor (2012 - Present), Springer Series in Biomaterials Science and Engineering. Germany, Springer, 2018.
Wang M., Series Editor (2012 - Present), UHMWPE Biomaterials for Joint Implants: Structures, Properties, and Clinical Performance. Germany, 2018, Volume 13, (Volume Editor: Jun Fu, Zhongmin Jin and Jinwu Wa.
Wang M., Series Editor (2012 - Present), Volume 10, Liquid Metal Biomaterials: Principles and Applications. Germany, 2018, Volume 10, (Volume Editor: Jing Liu and Liting Yi).
Wu J., SUN H., GUO L. and Wang M., Continuous wet spinning and dug-loaded wet-spun fibers, 43rd International Conference and Exposition on Advanced Ceramics and Composites (ICACC’19). Daytona Beach, USA, 2019, 1 pp.
ZHAO Q., Cui H., Wang J., Chen H., Wang Y., Zhang L., Du X. and Wang M., Regulation effects of biomimetic hybrid scaffolds on vascular endothelium remodeling, ACS Applied Materials & Interfaces. USA, AMER Chemical Soc, 2018, 10: 23583-23594.
ZHOU Y., Zhao Q., Tsai N.L.Y. and Wang M., Bicomponent nanofibrous scaffolds with dual release of anticancer drugs and biomacromolecules, MRS Communications. UK, University of Cambridge Press, 2019, 9(1): 413-420.
Zhang Y., Wang C., Fu L., Ye S., Wang M. and Zhou Y., Fabrication and application of novel porous scaffold in situ-loaded graphene oxide and osteogenic peptide by cryogenic 3D printing for repairing critical-sized bone defect, Molecules. Switzerland, MDPI, 2019, 24(9): 1669.
Zhao Q. and Wang M., Manipulating the release of growth factors from biodegradable microspheres for potentially different therapeutic effects by using two different electrospray techniques for microsphere fabrication, Polymer Degradation and Stability. The Netherlands, Elsevier Science Ltd., 2019, 162: 169-179.


Researcher : Wang X
List of Research Outputs

DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., Tao Y., Lee A.P.W. and Kwok K.W., Best Poster Paper Award (2nd place), 2019 IEEE International Conference on Robotics and Automation (ICRA’19) workshop on Surgical Robots, sponsored by Intuitive Surgical Inc.. 2019.
DONG Z., WANG X., HE Z., HO J.D.-.L., Tang W.L., TAO Y., LEE A.P.W. and Kwok K.W., Experimental Validation of Autonomous Motion Control with Standard Cardiac Electrophysiology Catheter, IEEE International Conference on Robotics and Automation (ICRA) Workshop – Open Challenges and State-of-the-Art in Control System Design and Technology Development for Surgical Robotic Systems. 2019.
FANG G., WANG X., WANG K., Lee K.H., HO J.D.-.L., FU H.C., Fu K.C.D. and Kwok K.W., Vision-based Online Learning Control for Soft Robots using Local Gaussian Process Regression, IEEE Robotics and Automation Letters. IEEE, 2019, 4(2): 1194-1201.
WANG X. and Chan B.P., Gradient immobilization of Wnt proteins by multiphoton biofabrication technology., European Wnt Meeting. 12-14 Sep 2018, Heidelberg, Germany.. 2018.
Wang X., Member of the Editorial Board (2007 - Present), Frontiers of Materials Science. China, and Springer, Germany, Higher Education Press, 2018.


Researcher : Wang Y
List of Research Outputs

KWOK Y.H., Wang Y., WU M., LI F., ZHANG Y., Zhang H. and Leung Y.C.D., A dual fuel microfluidic fuel cell utilizing solar energy and methanol, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 409: 58-65.
PAN W., Wang Y., KWOK Y.H. and Leung Y.C.D., A low-cost portable cotton-based aluminum-air battery with high specific energy, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 179-185.
WANG Q., WANG Y., FAN Y., Hang J. and Li Y., Urban heat island circulations of an idealized circular city as affected by background wind speed, Building and Environment. 2019, 148: 433-447.
Wang Y., KWOK Y.H., ZHANG Y., PAN W. and Leung Y.C.D., Flexible hydrogen fuel cell fabricated on paper with embedded aluminium foil, Proceeding of the International Symposium on Hydrogen Energy & Energy Technologies (HEET2018). Japan, 2019, E3S Web of Conference 83,01004 (2019): pp.8.
Wang Y., KWOK Y.H., PAN W., Zhang H.M. and Leung Y.C.D., Innovative paper-based Al-air batteries as a low-cost and green energy technology for the miniwatt market, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 414: 278-282.
Wang Y., PAN W., KWOK Y.H., Lu X. and Leung Y.C.D., Low-cost Al-air batteries with paper-based solid electrolyte, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 522-527.
Xu M., Chen Y., XIONG F., Wang J., Liu Y., Lv J., Li Y., Wang Y., Chen Z. and Ma Y., A hidden symmetry-broken phase of MoS2 revealed as a superior photovoltaic material, J. Mater. Chem. A. 2018, 6: 16087.
Zhang H.M., Wang Y., KWOK Y.H., Wu Z.C., Xia D.H. and Leung Y.C.D., A Direct Ammonia Microfluidic Fuel Cell using NiCu Nanoparticles Supported on Carbon Nanotubes as an Electrocatalyst, ChemSusChem. Weinheim, Germany, Wiley-VCH Verlag GmbH & Co., 2018, 11: 2889-2897.


Researcher : Wang Y
List of Research Outputs

KWOK Y.H., Wang Y., WU M., LI F., ZHANG Y., Zhang H. and Leung Y.C.D., A dual fuel microfluidic fuel cell utilizing solar energy and methanol, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 409: 58-65.
PAN W., Wang Y., KWOK Y.H. and Leung Y.C.D., A low-cost portable cotton-based aluminum-air battery with high specific energy, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 179-185.
WANG Q., WANG Y., FAN Y., Hang J. and Li Y., Urban heat island circulations of an idealized circular city as affected by background wind speed, Building and Environment. 2019, 148: 433-447.
Wang Y., KWOK Y.H., ZHANG Y., PAN W. and Leung Y.C.D., Flexible hydrogen fuel cell fabricated on paper with embedded aluminium foil, Proceeding of the International Symposium on Hydrogen Energy & Energy Technologies (HEET2018). Japan, 2019, E3S Web of Conference 83,01004 (2019): pp.8.
Wang Y., KWOK Y.H., PAN W., Zhang H.M. and Leung Y.C.D., Innovative paper-based Al-air batteries as a low-cost and green energy technology for the miniwatt market, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 414: 278-282.
Wang Y., PAN W., KWOK Y.H., Lu X. and Leung Y.C.D., Low-cost Al-air batteries with paper-based solid electrolyte, Energy Procedia. Netherlands, Elsevier Science BV, 2019, 158: 522-527.
Xu M., Chen Y., XIONG F., Wang J., Liu Y., Lv J., Li Y., Wang Y., Chen Z. and Ma Y., A hidden symmetry-broken phase of MoS2 revealed as a superior photovoltaic material, J. Mater. Chem. A. 2018, 6: 16087.
Zhang H.M., Wang Y., KWOK Y.H., Wu Z.C., Xia D.H. and Leung Y.C.D., A Direct Ammonia Microfluidic Fuel Cell using NiCu Nanoparticles Supported on Carbon Nanotubes as an Electrocatalyst, ChemSusChem. Weinheim, Germany, Wiley-VCH Verlag GmbH & Co., 2018, 11: 2889-2897.


Researcher : Wang Z
Project Title:Mechanically programmable soft robotic actuators
Investigator(s):Wang Z
Department:Mechanical Engg
Source(s) of Funding:Early Career Scheme (ECS)
Start Date:09/2015


Project Title:Robotic manipulator for dental applications
Investigator(s):Wang Z, Pow EHN, Lam YHW
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:06/2017


Project Title:Interaction control of a bio-inspired robotic arm
Investigator(s):Wang Z
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2017


Project Title:Design of a soft-robotic gripper towards industrial applications
Investigator(s):Wang Z
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Translational and Applied Research
Start Date:06/2018


Project Title:Exploration of novel propulsion methods for underwater biomimetic robots
Investigator(s):Wang Z
Department:Mechanical Engg
Source(s) of Funding:Seed Fund for Basic Research
Start Date:06/2018


Project Title:IEEE International Conference on Real-time Computing and Robotics; Analytical Solution to Global Dynamic Balance Control of the Acrobot/A Rotational Tri-fingered Gripper for Stable Adaptable Grasping/Robotic System for Automatic Dental Restorations in Oral Cavity
Investigator(s):Wang Z
Department:Mechanical Engg
Source(s) of Funding:URC/CRCG - Conference Support for Teaching Staff
Start Date:08/2018


Project Title:Sturdy Soft Robots for Clean Effective Long-lasting Operations in Harsh Environments
Investigator(s):Wang Z, Wen R
Department:Mechanical Engg
Source(s) of Funding:Innovation and Technology Support Programme (Tier 3)
Start Date:09/2018


Project Title:Sturdy Soft Robots for Clean Effective Long-lasting Operations in Harsh Environments
Investigator(s):Wang Z, Wen R
Department:Mechanical Engg
Source(s) of Funding:Postdoctoral Hub Programme for ITF projects
Start Date:06/2019


List of Research Outputs

CHEN X., Hu T., Song C. and Wang Z., Analytical Solution to Global Dynamic Balance Control of the Acrobot, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). Maldives, 2018, 1-6.
CHEN X., YI J., Li J., ZHOU J. and Wang Z., Soft-Actuator-Based Robotic Joint for Safe and Forceful Interaction With Controllable Impact Response, IEEE Robotics and Automation Letters. 2018, 3: 3505-3512.
Gupta S., Ng J.K.T., SHEN Z. and Wang Z., Development of High Performance Mechanical Robotic Fish, Advanced Maritime Engineering Conference (PAAMES/AMEC 2018). 2018, 1-7.
Hu Y., Wen R., Wang Z., LI X. and WANG X., Soft Robotic Glove for Rehabilitation, Silver award from International Exhibition of Inventions of Geneva (IEIG). 2019.
LI J., SHEN Z., Xu W.Y.T., Lam Y.H.W., Hsung R.T.C., Pow E.H.N., Kosuge K. and Wang Z., A Compact Dental Robotic System Using Soft Bracing Technique, IEEE Robotics and Automation Letters. 2019, 4: 1271 - 1278.
LI J., Zhang Y., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., Robotic System for Automatic Dental Restorations in Oral Cavity, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
Li J., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., A Customizable, Compact Robotic Manipulator for Assisting Multiple Dental Procedures, IEEE International Conference on Advanced Robotics and Mechatronics (ICARM2018). 2018, 1-6.
Wang Z., Advanced Control Methods of Soft Robots, Tianjin University Symposium on Soft Robotics, Tianjin, China. 2019.
Wang Z., Soft Robotics: Design, Control, and Applications, Guangzhou University, Guanghzou. 2019.
Wang Z., Soft Robotics: From Theory to Applications, Huazhong University of Science and Technology. 2019.
Wang Z., Soft Robots for Medical Applications, AISONO Inc, Shenzhen, China. 2019.
YI J., CHEN X., Song C., ZHOU J., Liu Y., Liu S. and Wang Z., Customizable Three-Dimensional-Printed Origami Soft Robotic Joint With Effective Behavior Shaping for Safe Interactions, IEEE Transactions on Robotics . 2019, 35: 114-123.
ZHANG R., SHEN Z. and Wang Z., Ostraciiform Underwater Robot With Segmented Caudal Fin, IEEE Robotics and Automation Letters. 2018, 3: 2902-2909.
ZHOU J., CHEN X., Chang U., Liu Y., Chen Y.H. and Wang Z., A Grasping Component Mapping Approach for Soft Robotic End-Effector Control, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). 2019.
ZHOU J., YI J. and Wang Z., A Rotational Tri-fingered Gripper for stable Adaptable Grasping, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
ZHOU J., YI J., CHEN X., Liu Z. and Wang Z., BCL-13: A 13-DOF Soft Robotic Hand for Dexterous Grasping and In-Hand Manipulation, IEEE Robotics and Automation Letters. 2018, 3: 3379-3386.
ZHOU J., CHEN X., Chang U. and Wang Z., Best Student Paper Award Finalist, "A Grasping Component Mapping Approach for General and Intuitive Soft Robotic End-Effector Control", IEEE International Conference on Soft Robotics (RoboSoft) 2019, Korea. 2019.
ZHOU J., CHEN X., Wang Z., Pan J. and Wang W.P., Intuitive Control of Humanoid Soft-Robotic Hand BCL-13, 2018 IEEE-RAS 18th International Conference on Humanoid Robots (Humanoids). 2018.
Zhang T.Y., Xu W.Y.T., Tao Y.F., Tsang H.Y., LI J. and Wang Z., Hong Kong X Best FYP Award 2019, Hong Kong X Tech. 2019.
Zhang T.Y., Xu W.Y.T., Tao Y.F., Tsang H.Y., LI J. and Wang Z., IMechE Best Student Project of the Year 2018: Dental Robotic Manipulator, Institute of Mechanical Engineers HK (IMechE). 2019.


Researcher : Weerasuriya AU
List of Research Outputs

Weerasuriya A.U., Zhang X.U.E.L.I.N., Gan V...J...L. and Tan Y.I., A Holistic Framework To Utilize Natural Ventilation To Optimize Energy performance Of Residential High-rise Buildings, Building and Environment. Elsevier, 2019, 153: 218-233.


Researcher : Wei J
List of Research Outputs

Wei J., ZHOU J., Liu Y., Wu J., Jin T., Li Y. and Yen H., A novel partial lid for mechanical defeatherers reduced aerosol dispersion during processing of avian influenza virus infected poultry, PLoS One. 2019, 14(5): e0216478.
Xie C., Lau E.H.Y., Yoshida T., Yu H., Wang X., Wu H., Wei J., Cowling B.J., Peiris J.S.M., Li Y. and Yen H., Detection of influenza and other respiratory viruses in air sampled from a university campus: a longitudinal study, Clin Infect Dis. 2019.


Researcher : XIA C
List of Research Outputs

Bayikadi K.S., Sankar R., Wu C.T., XIA C., Chen Y., Chen L.C., Chen K.H. and Chou F.C., Enhanced thermoelectric performance of GeTe through in situ micro domain and Ge vacancy control, J. Mater. Chem. A. 2019, 7: 15181.
XIA C., Chen Y. and Chen H., Coexistence of polar displacements and conduction in doped ferroelectrics: An ab initio comparative study, Phys. Rev. Materials. 2019, 3: 054405.


Researcher : XIAO S
List of Research Outputs

XIAO S., Tang J.W., Hui D.S., Lei H., Yu H. and Li Y., Probable transmission routes of the influenza virus in a nosocomial outbreak, Epidemiology and Infection. 2018, 146: 1114-1122.
XIAO S., The Role of Fomites in Disease Spread and the Transmission Characteristics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-208.


Researcher : XIE W
List of Research Outputs

Ng C.O. and XIE W., End loss for Stokes flow through a slippery circular pore in a barrier of finite thickness, Physics of Fluids. AIP, 2018, 30: 103604.
XIE W., Effects of Slip on Flow Through a Micro-pore and Flow in a Laminar Boundary Layer, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-88.


Researcher : XIE X
List of Research Outputs

FAN C., Lam J. and XIE X., Peak-to-peak filtering for periodic piecewise linear polytopic systems, International Journal of Systems Science. 2018, 49(9): 1997-2011.
Liu Y., Li P., XIE X. and Zhang B., Non-fragile control of periodic piecewise linear time-varying systems with time delay, IET Control Theory & Applications. 2019.
XIE X., Lam J. and Li P., A novel H¥ tracking control scheme for periodic piecewise time-varying systems, Information Sciences. USA, Elsevier Science Inc, 2019, 484: 71-83.
XIE X., Analysis and Synthesis of Dynamic Systems with Periodic Piecewise Characteristics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-178.
XIE X. and Lam J., Guaranteed cost control of periodic piecewise linear time-delay systems, Automatica. England, Pergamon-elsevier Science Ltd, 2018, 94: 274-282.
XIE X., Lam J. and FAN C., Robust time-weighted guaranteed cost control of uncertain periodic piecewise linear systems, Information Sciences. USA, Elsevier Science Inc, 2018, 460-461: 238-253.
XIE X., The IET Outstanding Reviewer 2018, The Institution of Engineering & Technology (IET). 2019.


Researcher : XIONG F
List of Research Outputs

Li J., Zhang X., Wang X., Bu Z., Zheng L., Zhou B., XIONG F., Chen Y. and Pei Y., High performance GeTe thermoelectrics in both rhombohedral and cubic phases, J. Am. Chem. Soc.. 2018, 140: 16190.
Li J., Li W., Bu Z., Wang X., Gao B., XIONG F., Chen Y. and Pei Y., Thermoelectric transport properties of CdxBiyGe1-x-yTe alloys, ACS Appl. Mater. Interfaces. 2018, 10: 39904.
Tang J., Gao B., Lin S., Wang X., Zhang X., XIONG F., Li W., Chen Y. and Pei Y., Manipulation of solubility and interstitial defects for improving thermoelectric SnTe alloys, ACS Energy Lett.. 2018, 3: 1969.
Tang J., Yao Z., Chen Z., Lin S., Zhang X., XIONG F., Li W., Chen Y. and Pei Y., Maximization of transporting bands for high-performance SnTe alloy thermoelectrics, Mater. Today Phys.. 2019, 9: 100091.
Wu Y., Chen Z., Nan P., XIONG F., Lin S., Zhang X., Chen Y., Chen L., Ge B. and Pei Y., Lattice strain advances thermoelectrices, Joule. 2019, 3: 1276.
Xu M., Chen Y., XIONG F., Wang J., Liu Y., Lv J., Li Y., Wang Y., Chen Z. and Ma Y., A hidden symmetry-broken phase of MoS2 revealed as a superior photovoltaic material, J. Mater. Chem. A. 2018, 6: 16087.


Researcher : XU Z
List of Research Outputs

XU Z. and Kim J., X-ray Driven Microswimmers, Materials Research Society (MRS) Fall 2018.
XU Z., CHEN M., Lee H., Feng S.P.T., Park J.Y., Lee S. and Kim J., X-ray-Powered Micromotors, ACS Applied Materials & Interfaces. 2019, 11: 15727-15732.


Researcher : Xu L
List of Research Outputs

Xu L., Bio-Inspired Soft Materials and Bio-integrated Soft Electronics, Seminar on Biomedicine and Biotechnology, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences . 2019.
Xu L., Bio-Inspired Soft Materials and Devices: from Artificial Cartilage to Organ-Mounted Electronics, Departmental Seminar, Department of Mechanical Engineering, City University of Hong Kong. 2019.
Xu L., Biomimetic Nanocomposites for Bio-Integrated Electronics, 19th IEEE Conference on Nanotechnology, Macau. 2019.
Xu L., Guest Editor, Journal of Low Power Electronics and Applications. MDPI, 2018.
Xu L., Soft Materials and Devices with Biomimetic Nanocompostes, Microsystems & Nanoengineering Summit 2019, Shanghai. 2019.


Researcher : YAN WH
List of Research Outputs

Chan Y.K., YAN W.H., HUNG L.T., CHAO Y., WU J. and Shum H.C., All Aqueous Thin-film-flow-induced Cell-based Monolayer, ACS Applied Materials & Interfaces. ACS Publications, 2019, 11: 22869-22877.


Researcher : YAN Z
List of Research Outputs

FANG C., HUI T.H., WEI X., YAN Z., Qian J. and Lin Y., Interaction and fusion dynamics between cellular blebs, Journal of Biomechanics. 2018, 81: 113-121.
SHAO X., You R., HUI T.H., FANG C., GONG Z., YAN Z., Chang R.C.C., Shenoy V.B. and Lin Y., Tension- and Adhesion-Regulated Retraction of Injured Axons, Biophysical Journal. 2019, 117: 193-202.


Researcher : YANG Y
List of Research Outputs

LI Y., Chen Y.H., YANG Y. and LI Y., Soft Robotic Grippers Based on Particle Transmission, IEEE/ASME Transaction on Mechatronics.. 2019.


Researcher : YI J
List of Research Outputs

CHEN X., YI J., Li J., ZHOU J. and Wang Z., Soft-Actuator-Based Robotic Joint for Safe and Forceful Interaction With Controllable Impact Response, IEEE Robotics and Automation Letters. 2018, 3: 3505-3512.
YI J., CHEN X., Song C., ZHOU J., Liu Y., Liu S. and Wang Z., Customizable Three-Dimensional-Printed Origami Soft Robotic Joint With Effective Behavior Shaping for Safe Interactions, IEEE Transactions on Robotics . 2019, 35: 114-123.
YI J., Origami-inspired Soft Pneumatic Robots for Safe Human-robot Interaction, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-153.
ZHOU J., YI J. and Wang Z., A Rotational Tri-fingered Gripper for stable Adaptable Grasping, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
ZHOU J., YI J., CHEN X., Liu Z. and Wang Z., BCL-13: A 13-DOF Soft Robotic Hand for Dexterous Grasping and In-Hand Manipulation, IEEE Robotics and Automation Letters. 2018, 3: 3379-3386.


Researcher : YIN S
List of Research Outputs

FAN Y., Hunt J., YIN S. and Li Y., Mean shear flow in recirculating turbulent urban convection and the plume-puff eddy structure below stably stratified inversion layers, Theoretical and Applied Climatology. 2019, 135: 1485-1499.
Fan Y., Li Y. and Yin S., Non-uniform ground-level wind patterns in a heat dome over a uniformly heated non-circular city, International Journal of Heat and Mass Transfer. 2018, 124: 233-246.
WANG K., Li Y., Luo Z., Yin S. and Chan P.W., Harmonic analysis of 130-year hourly air temperature in Hong Kong: detecting urban warming from the perspective of annual and daily cycles, Climate Dynamics. 2018, 51: 613-625.
YIN S., Li Y., FAN Y. and Sandberg M., Experimental investigation of near-field stream-wise flow development and spatial structure in triple buoyant plumes, Building and Environment. 2019, 149: 79-89.
Yin S., Li Y., Fan Y. and Sandberg M., Unsteady large-scale flow patterns and dynamic vortex movement in near-field triple buoyant plumes, Building and Environment. 2018, 142: 288-300.


Researcher : YU H
List of Research Outputs

XIAO S., Tang J.W., Hui D.S., Lei H., Yu H. and Li Y., Probable transmission routes of the influenza virus in a nosocomial outbreak, Epidemiology and Infection. 2018, 146: 1114-1122.
Xie C., Lau E.H.Y., Yoshida T., Yu H., Wang X., Wu H., Wei J., Cowling B.J., Peiris J.S.M., Li Y. and Yen H., Detection of influenza and other respiratory viruses in air sampled from a university campus: a longitudinal study, Clin Infect Dis. 2019.
YU H., Novel High-Pressure Phases and Transport Properties of IV-VI Compounds, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-156.
YU H., Gao D., Wang X., Du X., Lin X., Guo W., Zou R., Jin C., Li K. and Chen Y., Unraveling a novel ferroelectric GeSe phase and its transformation into a topological crystalline insulator under high pressure, NPG Asia Mater.. 2018, 10: 882.
YU H., Lin X., Li K. and Chen Y., Unveiling a novel cation-rich compound in high-pressure Pb-Te binary system, ACS Cent. Sci.. 2019, 5: 683.


Researcher : YUAN H
List of Research Outputs

Deng Y., MA Q., YUAN H., Lum G. and Shum H.C., Development of dual-component protein microparticles in all-aqueous systems for biomedical applications, Journal of Materials Chemistry B. Royal Society of Chemistry (RSC), 2019, 19: 3059-3065.
FU X., ZHANG Y., YUAN H., Binks B.P. and Shum H.C., Controlled Actuation of Liquid Marbles on a Dielectric, ACS Applied Materials and Interfaces. American Chemical Society (ACS), 2018, 10: 34822-34827.
YUAN H., Application of Droplet Reactors with Microfluidics, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-164.
YUAN H., CHAO Y., Li S., Tang Y.H., HUANG Y., CHE Y., Wong A.S.T., Zhang T. and Shum H.C., Picoinjection-Enabled Multitarget Loop-Mediated Isothermal Amplification for Detection of Foodborne Pathogens, Analytical Chemistry. American Chemical Society (ACS), 2018, 90: 13173-13177.


Researcher : Yin S
List of Research Outputs

FAN Y., Hunt J., YIN S. and Li Y., Mean shear flow in recirculating turbulent urban convection and the plume-puff eddy structure below stably stratified inversion layers, Theoretical and Applied Climatology. 2019, 135: 1485-1499.
Fan Y., Li Y. and Yin S., Non-uniform ground-level wind patterns in a heat dome over a uniformly heated non-circular city, International Journal of Heat and Mass Transfer. 2018, 124: 233-246.
WANG K., Li Y., Luo Z., Yin S. and Chan P.W., Harmonic analysis of 130-year hourly air temperature in Hong Kong: detecting urban warming from the perspective of annual and daily cycles, Climate Dynamics. 2018, 51: 613-625.
YIN S., Li Y., FAN Y. and Sandberg M., Experimental investigation of near-field stream-wise flow development and spatial structure in triple buoyant plumes, Building and Environment. 2019, 149: 79-89.
Yin S., Li Y., Fan Y. and Sandberg M., Unsteady large-scale flow patterns and dynamic vortex movement in near-field triple buoyant plumes, Building and Environment. 2018, 142: 288-300.


Researcher : Yu H
List of Research Outputs

XIAO S., Tang J.W., Hui D.S., Lei H., Yu H. and Li Y., Probable transmission routes of the influenza virus in a nosocomial outbreak, Epidemiology and Infection. 2018, 146: 1114-1122.
Xie C., Lau E.H.Y., Yoshida T., Yu H., Wang X., Wu H., Wei J., Cowling B.J., Peiris J.S.M., Li Y. and Yen H., Detection of influenza and other respiratory viruses in air sampled from a university campus: a longitudinal study, Clin Infect Dis. 2019.
YU H., Novel High-Pressure Phases and Transport Properties of IV-VI Compounds, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2019, 1-156.
YU H., Gao D., Wang X., Du X., Lin X., Guo W., Zou R., Jin C., Li K. and Chen Y., Unraveling a novel ferroelectric GeSe phase and its transformation into a topological crystalline insulator under high pressure, NPG Asia Mater.. 2018, 10: 882.
YU H., Lin X., Li K. and Chen Y., Unveiling a novel cation-rich compound in high-pressure Pb-Te binary system, ACS Cent. Sci.. 2019, 5: 683.


Researcher : ZHANG C
List of Research Outputs

Cai J., Zhang M., Sun Z., Zhang C., Liang C., Khan A., Ning X.H., Ge H.X., Feng S.P.T. and Li W., Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics, Journal of Materials Chemistry C. 2019, 7(15): 4363-4373.
Cai J., Zhang C., Khan A., Wang L. and Li W., Selective Electroless Metallization of Micro-and Nanopatterns via Poly (dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications, ACS Applied Materials & Interfaces. 2018.
ZHANG C., Micro- and Nanostructures on Deformable Substrates: Fabrication and Application, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-108.
Zhang C., Cai J., Liang C., Khan A. and Li W., Scalable Fabrication of Metallic Nanofiber Network via Templated Electrodeposition for Flexible Electronics, Advanced Functional Materials. 2019, 1903123.


Researcher : ZHANG R
List of Research Outputs

ZHANG R., SHEN Z. and Wang Z., Ostraciiform Underwater Robot With Segmented Caudal Fin, IEEE Robotics and Automation Letters. 2018, 3: 2902-2909.


Researcher : ZHANG S
List of Research Outputs

ZHANG S., he Acoustic Analysis and Design of Duct Lining for Low-frequency Noise Control, M.Phil. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-133.


Researcher : ZHANG Y
List of Research Outputs

FU X., ZHANG Y., YUAN H., Binks B.P. and Shum H.C., Controlled Actuation of Liquid Marbles on a Dielectric, ACS Applied Materials and Interfaces. American Chemical Society (ACS), 2018, 10: 34822-34827.
KWOK Y.H., Wang Y., WU M., LI F., ZHANG Y., Zhang H. and Leung Y.C.D., A dual fuel microfluidic fuel cell utilizing solar energy and methanol, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 409: 58-65.
LI J., Zhang Y., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., Robotic System for Automatic Dental Restorations in Oral Cavity, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
Liu Z., ZHANG Y., Yang T., Wang Z. and Shum H.C., Compressed liquid marble ruptures at edge , Applied Physics Letters. American Institute of Physics (AIP), 2019, 114: 243701.
WU M., Leung Y.C.D., ZHANG Y., Huang H.B., Xie R., Szeto W. and LI F., Toluene degradation over Mn-TiO2/CeO2 composite catalyst under vacuum ultraviolet (VUV) irradiation, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 195: 985-994.
WU M., ZHANG Y., Szeto W. and Leung Y.C.D., VOC degradation over nano CeO2 photocatalysts under VUV irradiation, International Conference on Chemistry and the Environment. Greene, EuchemS, 2019, Abstract Book: pp.1.
WU M., ZHANG Y., Szeto W., PAN W., Huang H.B. and Leung Y.C.D., Vacuum ultraviolet (VUV)-based photocatalytic oxidation for toluene degradation over pure CeO2, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 200: 203-213.
Wang Y., KWOK Y.H., ZHANG Y., PAN W. and Leung Y.C.D., Flexible hydrogen fuel cell fabricated on paper with embedded aluminium foil, Proceeding of the International Symposium on Hydrogen Energy & Energy Technologies (HEET2018). Japan, 2019, E3S Web of Conference 83,01004 (2019): pp.8.
ZHANG Y. and Ngan A.H.W., Extracting dislocation microstructures by deep learning , International Journal of Plasticity. 2019, 115: 18-28.
ZHANG Y., Modeling and Simulation of Plasticity from Dislocation Density and Deformation in Electrochemical Actuation, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-109.


Researcher : ZHANG Y
List of Research Outputs

FU X., ZHANG Y., YUAN H., Binks B.P. and Shum H.C., Controlled Actuation of Liquid Marbles on a Dielectric, ACS Applied Materials and Interfaces. American Chemical Society (ACS), 2018, 10: 34822-34827.
KWOK Y.H., Wang Y., WU M., LI F., ZHANG Y., Zhang H. and Leung Y.C.D., A dual fuel microfluidic fuel cell utilizing solar energy and methanol, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 409: 58-65.
LI J., Zhang Y., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., Robotic System for Automatic Dental Restorations in Oral Cavity, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
Liu Z., ZHANG Y., Yang T., Wang Z. and Shum H.C., Compressed liquid marble ruptures at edge , Applied Physics Letters. American Institute of Physics (AIP), 2019, 114: 243701.
WU M., Leung Y.C.D., ZHANG Y., Huang H.B., Xie R., Szeto W. and LI F., Toluene degradation over Mn-TiO2/CeO2 composite catalyst under vacuum ultraviolet (VUV) irradiation, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 195: 985-994.
WU M., ZHANG Y., Szeto W. and Leung Y.C.D., VOC degradation over nano CeO2 photocatalysts under VUV irradiation, International Conference on Chemistry and the Environment. Greene, EuchemS, 2019, Abstract Book: pp.1.
WU M., ZHANG Y., Szeto W., PAN W., Huang H.B. and Leung Y.C.D., Vacuum ultraviolet (VUV)-based photocatalytic oxidation for toluene degradation over pure CeO2, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 200: 203-213.
Wang Y., KWOK Y.H., ZHANG Y., PAN W. and Leung Y.C.D., Flexible hydrogen fuel cell fabricated on paper with embedded aluminium foil, Proceeding of the International Symposium on Hydrogen Energy & Energy Technologies (HEET2018). Japan, 2019, E3S Web of Conference 83,01004 (2019): pp.8.
ZHANG Y. and Ngan A.H.W., Extracting dislocation microstructures by deep learning , International Journal of Plasticity. 2019, 115: 18-28.
ZHANG Y., Modeling and Simulation of Plasticity from Dislocation Density and Deformation in Electrochemical Actuation, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-109.


Researcher : ZHANG Y
List of Research Outputs

FU X., ZHANG Y., YUAN H., Binks B.P. and Shum H.C., Controlled Actuation of Liquid Marbles on a Dielectric, ACS Applied Materials and Interfaces. American Chemical Society (ACS), 2018, 10: 34822-34827.
KWOK Y.H., Wang Y., WU M., LI F., ZHANG Y., Zhang H. and Leung Y.C.D., A dual fuel microfluidic fuel cell utilizing solar energy and methanol, Journal of Power Sources. Netherlands, Elsevier Science BV, 2019, 409: 58-65.
LI J., Zhang Y., Lam Y.H.W., Hsung T.C., Pow E.H.N. and Wang Z., Robotic System for Automatic Dental Restorations in Oral Cavity, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
Liu Z., ZHANG Y., Yang T., Wang Z. and Shum H.C., Compressed liquid marble ruptures at edge , Applied Physics Letters. American Institute of Physics (AIP), 2019, 114: 243701.
WU M., Leung Y.C.D., ZHANG Y., Huang H.B., Xie R., Szeto W. and LI F., Toluene degradation over Mn-TiO2/CeO2 composite catalyst under vacuum ultraviolet (VUV) irradiation, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 195: 985-994.
WU M., ZHANG Y., Szeto W. and Leung Y.C.D., VOC degradation over nano CeO2 photocatalysts under VUV irradiation, International Conference on Chemistry and the Environment. Greene, EuchemS, 2019, Abstract Book: pp.1.
WU M., ZHANG Y., Szeto W., PAN W., Huang H.B. and Leung Y.C.D., Vacuum ultraviolet (VUV)-based photocatalytic oxidation for toluene degradation over pure CeO2, Chemical Engineering Science. UK, Pergamon-elsevier Science Ltd, 2019, 200: 203-213.
Wang Y., KWOK Y.H., ZHANG Y., PAN W. and Leung Y.C.D., Flexible hydrogen fuel cell fabricated on paper with embedded aluminium foil, Proceeding of the International Symposium on Hydrogen Energy & Energy Technologies (HEET2018). Japan, 2019, E3S Web of Conference 83,01004 (2019): pp.8.
ZHANG Y. and Ngan A.H.W., Extracting dislocation microstructures by deep learning , International Journal of Plasticity. 2019, 115: 18-28.
ZHANG Y., Modeling and Simulation of Plasticity from Dislocation Density and Deformation in Electrochemical Actuation, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-109.


Researcher : ZHANG Z
List of Research Outputs

ZHANG Z., Nonlinear Analyses of the PVT Crystal Growth, the Free-surface Flow and the Two-phase Flow, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-196.
ZHOU Z., Zhang Z., Wu Q.S., Ji X., Wang J.L., Zeng X.C., Feng S.P.T. and Chan K.L., Inch-Scale Grain Boundary Free Organic Crystals Developed by Nucleation Seed-Controlled Shearing Method, ACS Applied Materials & Interfaces. 2018, 10: 35395-35403.


Researcher : ZHAO Q
List of Research Outputs

Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
ZHAO Q., Cui H., Wang J., Chen H., Wang Y., Zhang L., Du X. and Wang M., Regulation effects of biomimetic hybrid scaffolds on vascular endothelium remodeling, ACS Applied Materials & Interfaces. USA, AMER Chemical Soc, 2018, 10: 23583-23594.
ZHOU Y., Zhao Q., Tsai N.L.Y. and Wang M., Bicomponent nanofibrous scaffolds with dual release of anticancer drugs and biomacromolecules, MRS Communications. UK, University of Cambridge Press, 2019, 9(1): 413-420.
Zhao Q. and Wang M., Manipulating the release of growth factors from biodegradable microspheres for potentially different therapeutic effects by using two different electrospray techniques for microsphere fabrication, Polymer Degradation and Stability. The Netherlands, Elsevier Science Ltd., 2019, 162: 169-179.


Researcher : ZHOU J
List of Research Outputs

CHEN X., YI J., Li J., ZHOU J. and Wang Z., Soft-Actuator-Based Robotic Joint for Safe and Forceful Interaction With Controllable Impact Response, IEEE Robotics and Automation Letters. 2018, 3: 3505-3512.
YI J., CHEN X., Song C., ZHOU J., Liu Y., Liu S. and Wang Z., Customizable Three-Dimensional-Printed Origami Soft Robotic Joint With Effective Behavior Shaping for Safe Interactions, IEEE Transactions on Robotics . 2019, 35: 114-123.
ZHOU J., CHEN X., Chang U., Liu Y., Chen Y.H. and Wang Z., A Grasping Component Mapping Approach for Soft Robotic End-Effector Control, 2019 2nd IEEE International Conference on Soft Robotics (RoboSoft). 2019.
ZHOU J., YI J. and Wang Z., A Rotational Tri-fingered Gripper for stable Adaptable Grasping, 2018 IEEE International Conference on Real-time Computing and Robotics (IEEE RCAR 2018). 2018.
ZHOU J., YI J., CHEN X., Liu Z. and Wang Z., BCL-13: A 13-DOF Soft Robotic Hand for Dexterous Grasping and In-Hand Manipulation, IEEE Robotics and Automation Letters. 2018, 3: 3379-3386.
ZHOU J., CHEN X., Chang U. and Wang Z., Best Student Paper Award Finalist, "A Grasping Component Mapping Approach for General and Intuitive Soft Robotic End-Effector Control", IEEE International Conference on Soft Robotics (RoboSoft) 2019, Korea. 2019.
ZHOU J., CHEN X., Wang Z., Pan J. and Wang W.P., Intuitive Control of Humanoid Soft-Robotic Hand BCL-13, 2018 IEEE-RAS 18th International Conference on Humanoid Robots (Humanoids). 2018.


Researcher : ZHOU Y
List of Research Outputs

ZHOU Y., Zhao Q., Tsai N.L.Y. and Wang M., Bicomponent nanofibrous scaffolds with dual release of anticancer drugs and biomacromolecules, MRS Communications. UK, University of Cambridge Press, 2019, 9(1): 413-420.


Researcher : ZHOU Z
List of Research Outputs

CHENG R., Chung C., Zhang H., ZHOU Z., Zhai P., Huang Y.T., Lee H. and Feng S.P.T., An Air Knife-Assisted Recrystallization Method for Ambient-Process Planar Perovskite Solar Cells and Its Dim-Light Harvesting, Small. 2019, 15: 1804465.
Ngan A.H.W., Zhou Z., SUN X. and Tang B., Invited talk, “Indentation of ultra-soft materials: pico-indentation of non-adherent cells in the Pa-modulus range”, 6th International Indentation Workshop (IIW6), July 1-6, 2018, Sapporo, Japan., 2018.
YANG Z., ZHOU Z., Guo H., Yao Z., Ma X., Song X., Feng S.P.T. and Tang C., Tannic Acid/Fe 3+ Nanoscaffold for Interfacial Polymerization: Toward Enhanced Nanofiltration Performance , Environmental Science & Technology. 2018, 52: 9341-9349.
Yang Z., Huang X., Ma X., ZHOU Z., Guo H., Yao Z., Feng S.P.T. and Tang C., Fabrication of a novel and green thin-film composite membrane containing nanovoids for water purification, Journal of Membrane Science. 2019, 570-571: 314-321.
ZHOU Z., Zhang Z., Wu Q.S., Ji X., Wang J.L., Zeng X.C., Feng S.P.T. and Chan K.L., Inch-Scale Grain Boundary Free Organic Crystals Developed by Nucleation Seed-Controlled Shearing Method, ACS Applied Materials & Interfaces. 2018, 10: 35395-35403.


Researcher : ZHU B
List of Research Outputs

Liu M., Lam J., ZHU B. and Kwok K.W., On Positive Realness, Negative Imaginariness, and H∞ Control of State-space Symmetric Systems, Automatica. England, Pergamon-elsevier Science Ltd, 2019, 101: 190-196.
ZHU B., Lam J. and Song X., Stability and L1-gain analysis of linear periodic piecewise positive systems, Automatica. England, Pergamon-elsevier Science Ltd, 2019, 101: 232-240.


Researcher : ZHU S
List of Research Outputs

CHAO Y., MAK S.Y., Rahman S., ZHU S. and Shum H.C., Generation of High‐Order All‐Aqueous Emulsion Drops by Osmosis‐Driven Phase Separation, Small. Wiley, 2018, 14: 1802107.


Researcher : ZHU Z
List of Research Outputs

Wu R., Ding Y., Yu K.M., Zhou K., ZHU Z., Ou X., Zhang Q., Zhuang M., Li W., Xu Z., Altman M.S. and Luo Z., Edge-Epitaxial Growth of Graphene on Cu with a Hydrogen-Free Approach, Chemistry of Materials. 2019, 31: 2555-2562.


Researcher : Zhai P
List of Research Outputs

CHENG R., Chung C., Zhang H., ZHOU Z., Zhai P., Huang Y.T., Lee H. and Feng S.P.T., An Air Knife-Assisted Recrystallization Method for Ambient-Process Planar Perovskite Solar Cells and Its Dim-Light Harvesting, Small. 2019, 15: 1804465.
Zhai P., CHENG R., REN L., Huang Y.T., Lee H. and Feng S.P.T., In Situ Interface Engineering of TiO 2 Nanocrystals for Fully Ambient-Processed Perovskite Solar Cells , Solar RRL. 2018, 1800103.


Researcher : Zhang C
List of Research Outputs

Cai J., Zhang M., Sun Z., Zhang C., Liang C., Khan A., Ning X.H., Ge H.X., Feng S.P.T. and Li W., Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics, Journal of Materials Chemistry C. 2019, 7(15): 4363-4373.
Cai J., Zhang C., Khan A., Wang L. and Li W., Selective Electroless Metallization of Micro-and Nanopatterns via Poly (dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications, ACS Applied Materials & Interfaces. 2018.
ZHANG C., Micro- and Nanostructures on Deformable Substrates: Fabrication and Application, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-108.
Zhang C., Cai J., Liang C., Khan A. and Li W., Scalable Fabrication of Metallic Nanofiber Network via Templated Electrodeposition for Flexible Electronics, Advanced Functional Materials. 2019, 1903123.


Researcher : Zhang C
List of Research Outputs

Cai J., Zhang M., Sun Z., Zhang C., Liang C., Khan A., Ning X.H., Ge H.X., Feng S.P.T. and Li W., Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics, Journal of Materials Chemistry C. 2019, 7(15): 4363-4373.
Cai J., Zhang C., Khan A., Wang L. and Li W., Selective Electroless Metallization of Micro-and Nanopatterns via Poly (dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications, ACS Applied Materials & Interfaces. 2018.
ZHANG C., Micro- and Nanostructures on Deformable Substrates: Fabrication and Application, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-108.
Zhang C., Cai J., Liang C., Khan A. and Li W., Scalable Fabrication of Metallic Nanofiber Network via Templated Electrodeposition for Flexible Electronics, Advanced Functional Materials. 2019, 1903123.


Researcher : Zhang F
List of Research Outputs

Gu H., Lyu X., Li Z. and Zhang F., Coordinate Descent Optimization for Winged-UAV Design, Journal of Intelligent & Robotic Systems. 2019.
Hang K., Lyu X., Song H., Stork J... .A..., Dollar A... .M..., Kragic D. and Zhang F., Perching and resting—A paradigm for UAV maneuvering with modularized landing gears, Science Robotics. Science Robotics, 2019, 4: eaau6637.
Lu G. and Zhang F., IMU-Based Attitude Estimation in the Presence of Narrow-Band Noise, IEEE/ASME Transactions on Mechatronics. IEEE, 2019, 24: 841-852.
Lyu X., Gu H., Zhou J., Li Z., Shen S. and Zhang F., Simulation and flight experiments of a quadrotor tail-sitter vertical take-off and landing unmanned aerial vehicle with wide flight envelope, International Journal of Micro Air Vehicles. 2018, 10: 303-317.


Researcher : Zhang M
List of Research Outputs

Cai J., Zhang M., Sun Z., Zhang C., Liang C., Khan A., Ning X.H., Ge H.X., Feng S.P.T. and Li W., Highly-facile template-based selective electroless metallization of micro- and nanopatterns for plastic electronics and plasmonics, Journal of Materials Chemistry C. 2019, 7(15): 4363-4373.


Researcher : Zhang N
List of Research Outputs

Zhang N., Zhao P. and Li Y., Increased infection severity in downstream cities in infectious disease transmission and tourists surveillance analysis, Journal of Theoretical Biology. 2019, 470: 20-29.
Zhang N., Huang H., Duan X., Zhao J. and Su B., Quantitative association analysis between PM2.5 concentration and factors on industry, energy, agriculture, and transportation, Scientific Reports. 2018, 8.
Zhang N., Li Y. and Huang H., Surface touch and its network growth in a graduate student office, Indoor Air. 2018, 28: 963-972.
Zhang N. and Li Y., Transmission of Influenza A in a Student Office Based on Realistic Person-to-Person Contact and Surface Touch Behaviour, International Journal of Environmental Research and Public Health. 2018, 15: 1699.


Researcher : Zhang Z
List of Research Outputs

ZHANG Z., Nonlinear Analyses of the PVT Crystal Growth, the Free-surface Flow and the Two-phase Flow, Ph.D. Thesis. Hong Kong, The University of Hong Kong, 2018, 1-196.
ZHOU Z., Zhang Z., Wu Q.S., Ji X., Wang J.L., Zeng X.C., Feng S.P.T. and Chan K.L., Inch-Scale Grain Boundary Free Organic Crystals Developed by Nucleation Seed-Controlled Shearing Method, ACS Applied Materials & Interfaces. 2018, 10: 35395-35403.


Researcher : Zhao P
List of Research Outputs

Zhang N., Zhao P. and Li Y., Increased infection severity in downstream cities in infectious disease transmission and tourists surveillance analysis, Journal of Theoretical Biology. 2019, 470: 20-29.
Zhao P., Li Y., Tsang T.L. and Chan P.T., Equilibrium of particle distribution on surfaces due to touch, Building and Environment. 2018, 143: 461-472.


Researcher : Zhao Q
List of Research Outputs

Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
Wang C., ZHAO Q., SUN H. and Wang M., 3D printing of multifunctional tissue engineering scaffolds, 12th International Conference on Ceramic Materials and Components for Energy and Environmental Applications. Singapore, 2018, 1 pp.
ZHAO Q., Cui H., Wang J., Chen H., Wang Y., Zhang L., Du X. and Wang M., Regulation effects of biomimetic hybrid scaffolds on vascular endothelium remodeling, ACS Applied Materials & Interfaces. USA, AMER Chemical Soc, 2018, 10: 23583-23594.
ZHOU Y., Zhao Q., Tsai N.L.Y. and Wang M., Bicomponent nanofibrous scaffolds with dual release of anticancer drugs and biomacromolecules, MRS Communications. UK, University of Cambridge Press, 2019, 9(1): 413-420.
Zhao Q. and Wang M., Manipulating the release of growth factors from biodegradable microspheres for potentially different therapeutic effects by using two different electrospray techniques for microsphere fabrication, Polymer Degradation and Stability. The Netherlands, Elsevier Science Ltd., 2019, 162: 169-179.


Researcher : Zhao W
List of Research Outputs

Tsang C.H.A., Li K., Zeng Y., Zhao W., Zhang T., Zhan Y., Xie R., Leung Y.C.D. and Huang H.B., Titanium oxide based photocatalytic materials development and their role of in the air pollutants degradation: Overview and forecast, Environment International. UK, Pergamon-elsevier Science Ltd, 2019, 125: 200-228.
Zhao W., Feng Y., Huang H.B., Zhou P.C., Li J., Zhang L., Dai B., Xu J., Zhu F. and Leung Y.C.D., A novel z-scheme Ag3VO4/BiVO4 heterojunction photocatalyst: study on the execellent photocatalytic performance and photocatalytic mechanism, Applied Catalysis B: Environmental. UK, Elsevier Science Ltd., 2019, 245: 448-458.
Zhao W., Zhang J., Zhu F., Mu F., Zhang L., Dai B., Xu J., Zhu A., Sun C. and Leung Y.C.D., Study the photocatalytic mechanism of the novel Ag/p-Ag2O/n-BiVO4 plasmonic photocatalyst for the simultaneous removal of BPA and chromium(VI), Chemical Engineering Journal. UK, Elsevier Science Ltd., 2019, 361: 1352-1362.


Researcher : Zheng G
Project Title:Theoretical investigation and atomistic simulation of deformation in iron-based bulk metallic glasses
Investigator(s):Zheng G
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:08/2006


Project Title:Atomistic Modeling of Mechanical Properties of Metal-Carbon Nanotube Composites
Investigator(s):Zheng G
Department:Mechanical Engg
Source(s) of Funding:General Research Fund (GRF)
Start Date:08/2007




Researcher : Zhou C
List of Research Outputs

Zhou C., Zhu P., Tian Y., Xu M. and Wang L., Engineering micromotors with droplet microfluidics, ACS Nano. American Chemical Society, 2019, 13(6): 6319-6329.


Researcher : Zhou Z
List of Research Outputs

CHENG R., Chung C., Zhang H., ZHOU Z., Zhai P., Huang Y.T., Lee H. and Feng S.P.T., An Air Knife-Assisted Recrystallization Method for Ambient-Process Planar Perovskite Solar Cells and Its Dim-Light Harvesting, Small. 2019, 15: 1804465.
Ngan A.H.W., Zhou Z., SUN X. and Tang B., Invited talk, “Indentation of ultra-soft materials: pico-indentation of non-adherent cells in the Pa-modulus range”, 6th International Indentation Workshop (IIW6), July 1-6, 2018, Sapporo, Japan., 2018.
YANG Z., ZHOU Z., Guo H., Yao Z., Ma X., Song X., Feng S.P.T. and Tang C., Tannic Acid/Fe 3+ Nanoscaffold for Interfacial Polymerization: Toward Enhanced Nanofiltration Performance , Environmental Science & Technology. 2018, 52: 9341-9349.
Yang Z., Huang X., Ma X., ZHOU Z., Guo H., Yao Z., Feng S.P.T. and Tang C., Fabrication of a novel and green thin-film composite membrane containing nanovoids for water purification, Journal of Membrane Science. 2019, 570-571: 314-321.
ZHOU Z., Zhang Z., Wu Q.S., Ji X., Wang J.L., Zeng X.C., Feng S.P.T. and Chan K.L., Inch-Scale Grain Boundary Free Organic Crystals Developed by Nucleation Seed-Controlled Shearing Method, ACS Applied Materials & Interfaces. 2018, 10: 35395-35403.


Researcher : Zhu P
List of Research Outputs

LEI L., Kong T., Zhu P., KANG Z., Tian X. and Wang L., Self-Assembly of TiO 2 Nanofiber-Based Microcapsules by Spontaneously Evolved Multiple Emulsions , Langmuir. 2018, 34: 8785-8791.
Zhou C., Zhu P., Tian Y., Xu M. and Wang L., Engineering micromotors with droplet microfluidics, ACS Nano. American Chemical Society, 2019, 13(6): 6319-6329.
Zhu P. and Wang L., Droplet Microfluidics for Robust Omniphobic Surfaces, 8th International Multidisciplinary Conference on Optofluidics . 2018.
Zhu P. and Wang L., Droplet pinch-off with pressure fluctuations, Chemical Engineering Science. 2019, 196: 333-343.
Zhu P., Kong T., TIAN Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. 2018, 5: 1156-1165.
Zhu P., Kong T., Tian Y., Tang X., Tian X. and Wang L., Superwettability with antithetic states: fluid repellency in immiscible liquids, Materials Horizons. The Royal Society of Chemistry, 2018, 5: 1156-1165.


-- End of Listing --